autogenerated headers for rev...

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/005990a7b2a5cdb96fe2f1ce357c450fb0305808

ASLUAV/ASLUAV.h

@@ -71,7 +71,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed, 2=Climb Speed, 3=Descent Speed)| Speed (-1 indicates no change)| Throttle (-1 indicates no change)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
-   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
+   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Yaw angle. NaN to use default heading| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */

ardupilotmega/ardupilotmega.h

@@ -89,7 +89,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed, 2=Climb Speed, 3=Descent Speed)| Speed (-1 indicates no change)| Throttle (-1 indicates no change)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
-   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
+   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Yaw angle. NaN to use default heading| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */

autoquad/autoquad.h

@@ -115,7 +115,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed, 2=Climb Speed, 3=Descent Speed)| Speed (-1 indicates no change)| Throttle (-1 indicates no change)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
-   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
+   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Yaw angle. NaN to use default heading| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */

common/common.h

@@ -718,7 +718,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed, 2=Climb Speed, 3=Descent Speed)| Speed (-1 indicates no change)| Throttle (-1 indicates no change)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
-   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
+   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Yaw angle. NaN to use default heading| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */

matrixpilot/matrixpilot.h

@@ -88,7 +88,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed, 2=Climb Speed, 3=Descent Speed)| Speed (-1 indicates no change)| Throttle (-1 indicates no change)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
-   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
+   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Yaw angle. NaN to use default heading| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */

message_definitions/common.xml

@@ -1619,7 +1619,7 @@
         <param index="1" label="Use Current" minValue="0" maxValue="1" increment="1">Use current (1=use current location, 0=use specified location)</param>
         <param index="2">Empty</param>
         <param index="3">Empty</param>
-        <param index="4">Empty</param>
+        <param index="4" label="Yaw" units="deg">Yaw angle. NaN to use default heading</param>
         <param index="5" label="Latitude">Latitude</param>
         <param index="6" label="Longitude">Longitude</param>
         <param index="7" label="Altitude" units="m">Altitude</param>

slugs/slugs.h

@@ -71,7 +71,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_MODE=176, /* Set system mode. |Mode| Custom mode - this is system specific, please refer to the individual autopilot specifications for details.| Custom sub mode - this is system specific, please refer to the individual autopilot specifications for details.| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_JUMP=177, /* Jump to the desired command in the mission list.  Repeat this action only the specified number of times |Sequence number| Repeat count| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_CHANGE_SPEED=178, /* Change speed and/or throttle set points. |Speed type (0=Airspeed, 1=Ground Speed, 2=Climb Speed, 3=Descent Speed)| Speed (-1 indicates no change)| Throttle (-1 indicates no change)| 0: absolute, 1: relative| Empty| Empty| Empty|  */
-   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
+   MAV_CMD_DO_SET_HOME=179, /* Changes the home location either to the current location or a specified location. |Use current (1=use current location, 0=use specified location)| Empty| Empty| Yaw angle. NaN to use default heading| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_PARAMETER=180, /* Set a system parameter.  Caution!  Use of this command requires knowledge of the numeric enumeration value of the parameter. |Parameter number| Parameter value| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_RELAY=181, /* Set a relay to a condition. |Relay instance number.| Setting. (1=on, 0=off, others possible depending on system hardware)| Empty| Empty| Empty| Empty| Empty|  */
    MAV_CMD_DO_REPEAT_RELAY=182, /* Cycle a relay on and off for a desired number of cycles with a desired period. |Relay instance number.| Cycle count.| Cycle time.| Empty| Empty| Empty| Empty|  */