autogenerated headers for rev...

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/8a44ecf5a7262c7e5cbc1afaeb964edb375e6a9c

ASLUAV/ASLUAV.h

@@ -125,6 +125,7 @@ typedef enum MAV_CMD
    MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default (CAMERA_SETTINGS) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Reset all settings| Reserved (all remaining params)|  */
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* WIP: Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* WIP: Stop image capture sequence |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)|  */
    MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start)| Shutter integration time (in ms)| Reserved|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* WIP: Starts video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Frames per second, set to -1 for highest framerate possible.| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise time in Hz)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* WIP: Stop the current video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */

ardupilotmega/ardupilotmega.h

@@ -143,6 +143,7 @@ typedef enum MAV_CMD
    MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default (CAMERA_SETTINGS) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Reset all settings| Reserved (all remaining params)|  */
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* WIP: Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* WIP: Stop image capture sequence |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)|  */
    MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start)| Shutter integration time (in ms)| Reserved|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* WIP: Starts video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Frames per second, set to -1 for highest framerate possible.| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise time in Hz)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* WIP: Stop the current video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */

autoquad/autoquad.h

@@ -169,6 +169,7 @@ typedef enum MAV_CMD
    MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default (CAMERA_SETTINGS) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Reset all settings| Reserved (all remaining params)|  */
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* WIP: Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* WIP: Stop image capture sequence |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)|  */
    MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start)| Shutter integration time (in ms)| Reserved|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* WIP: Starts video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Frames per second, set to -1 for highest framerate possible.| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise time in Hz)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* WIP: Stop the current video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */

common/common.h

@@ -444,6 +444,7 @@ typedef enum MAV_CMD
    MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default (CAMERA_SETTINGS) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Reset all settings| Reserved (all remaining params)|  */
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* WIP: Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* WIP: Stop image capture sequence |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)|  */
    MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start)| Shutter integration time (in ms)| Reserved|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* WIP: Starts video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Frames per second, set to -1 for highest framerate possible.| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise time in Hz)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* WIP: Stop the current video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */

matrixpilot/matrixpilot.h

@@ -142,6 +142,7 @@ typedef enum MAV_CMD
    MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default (CAMERA_SETTINGS) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Reset all settings| Reserved (all remaining params)|  */
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* WIP: Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* WIP: Stop image capture sequence |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)|  */
    MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start)| Shutter integration time (in ms)| Reserved|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* WIP: Starts video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Frames per second, set to -1 for highest framerate possible.| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise time in Hz)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* WIP: Stop the current video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */

message_definitions/common.xml

@@ -1397,6 +1397,12 @@
         <param index="1">Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)</param>
         <param index="2">Reserved</param>
       </entry>
+      <entry value="2002" name="MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE">
+        <description>WIP: Re-request a CAMERA_IMAGE_CAPTURE packet</description>
+        <param index="1">Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)</param>
+        <param index="2">Sequence number for missing CAMERA_IMAGE_CAPTURE packet</param>
+        <param index="3">Reserved (all remaining params)</param>
+      </entry>
       <entry value="2003" name="MAV_CMD_DO_TRIGGER_CONTROL">
         <description>Enable or disable on-board camera triggering system.</description>
         <param index="1">Trigger enable/disable (0 for disable, 1 for start)</param>

slugs/slugs.h

@@ -125,6 +125,7 @@ typedef enum MAV_CMD
    MAV_CMD_RESET_CAMERA_SETTINGS=529, /* WIP: Reset all camera settings to Factory Default (CAMERA_SETTINGS) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| 0: No Action 1: Reset all settings| Reserved (all remaining params)|  */
    MAV_CMD_IMAGE_START_CAPTURE=2000, /* WIP: Start image capture sequence. Sends CAMERA_IMAGE_CAPTURED after each capture. |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Duration between two consecutive pictures (in seconds)| Number of images to capture total - 0 for unlimited capture| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)|  */
    MAV_CMD_IMAGE_STOP_CAPTURE=2001, /* WIP: Stop image capture sequence |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */
+   MAV_CMD_REQUEST_CAMERA_IMAGE_CAPTURE=2002, /* WIP: Re-request a CAMERA_IMAGE_CAPTURE packet |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Sequence number for missing CAMERA_IMAGE_CAPTURE packet| Reserved (all remaining params)|  */
    MAV_CMD_DO_TRIGGER_CONTROL=2003, /* Enable or disable on-board camera triggering system. |Trigger enable/disable (0 for disable, 1 for start)| Shutter integration time (in ms)| Reserved|  */
    MAV_CMD_VIDEO_START_CAPTURE=2500, /* WIP: Starts video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Frames per second, set to -1 for highest framerate possible.| Resolution horizontal in pixels (set to -1 for highest resolution possible)| Resolution vertical in pixels (set to -1 for highest resolution possible)| Frequency CAMERA_CAPTURE_STATUS messages should be sent while recording (0 for no messages, otherwise time in Hz)|  */
    MAV_CMD_VIDEO_STOP_CAPTURE=2501, /* WIP: Stop the current video capture (recording) |Camera ID (0 for all cameras, 1 for first, 2 for second, etc.)| Reserved|  */