Commit 0e41ef3c authored by Jim Cromie's avatar Jim Cromie Committed by Linus Torvalds

[PATCH] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump to common module

Since the meaning of config-bits is the same for scx200 and pc8736x _gpios, we
can share a function to deliver this to user.  Since it is called via the
vtable, its also completely replaceable.  For now, we keep using printk...
Signed-off-by: default avatarJim Cromie <jim.cromie@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 1a66fdf0
......@@ -110,21 +110,6 @@ u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits)
return config;
}
void scx200_gpio_dump(unsigned index)
{
u32 config = scx200_gpio_configure(index, ~0, 0);
printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
index, (unsigned long) config,
(config & 1) ? "OE" : "TS", /* output enabled / tristate */
(config & 2) ? "PP" : "OD", /* push pull / open drain */
(config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
(config & 8) ? "LOCKED" : "", /* locked / unlocked */
(config & 16) ? "LEVEL" : "EDGE", /* level/edge input */
(config & 32) ? "HI" : "LO", /* trigger on rising/falling edge */
(config & 64) ? "DEBOUNCE" : ""); /* debounce */
}
static int __init scx200_init(void)
{
printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
......@@ -144,5 +129,4 @@ module_exit(scx200_cleanup);
EXPORT_SYMBOL(scx200_gpio_base);
EXPORT_SYMBOL(scx200_gpio_shadow);
EXPORT_SYMBOL(scx200_gpio_configure);
EXPORT_SYMBOL(scx200_gpio_dump);
EXPORT_SYMBOL(scx200_cb_base);
......@@ -19,6 +19,19 @@
#define NAME "nsc_gpio"
void nsc_gpio_dump(unsigned index, u32 config)
{
printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
index, (unsigned long)config,
(config & 1) ? "OE" : "TS", /* output-enabled/tristate */
(config & 2) ? "PP" : "OD", /* push pull / open drain */
(config & 4) ? "PUE" : "PUD", /* pull up enabled/disabled */
(config & 8) ? "LOCKED" : "", /* locked / unlocked */
(config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
(config & 32) ? "HI" : "LO", /* trigger on rise/fall edge */
(config & 64) ? "DEBOUNCE" : ""); /* debounce */
}
ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos)
{
......@@ -99,9 +112,10 @@ ssize_t nsc_gpio_read(struct file *file, char __user * buf,
return 1;
}
/* common routines for both scx200_gpio and pc87360_gpio */
/* common file-ops routines for both scx200_gpio and pc87360_gpio */
EXPORT_SYMBOL(nsc_gpio_write);
EXPORT_SYMBOL(nsc_gpio_read);
EXPORT_SYMBOL(nsc_gpio_dump);
static int __init nsc_gpio_init(void)
{
......
......@@ -35,7 +35,7 @@ static int major = 0; /* default to dynamic major */
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
extern void scx200_gpio_dump(unsigned index);
extern void nsc_gpio_dump(unsigned index);
extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
size_t len, loff_t *ppos);
......@@ -46,7 +46,7 @@ extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
struct nsc_gpio_ops scx200_access = {
.owner = THIS_MODULE,
.gpio_config = scx200_gpio_configure,
.gpio_dump = scx200_gpio_dump,
.gpio_dump = nsc_gpio_dump,
.gpio_get = scx200_gpio_get,
.gpio_set = scx200_gpio_set,
.gpio_set_high = scx200_gpio_set_high,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment