[PATCH] chardev: GPIO for SCx200 & PC-8736x: migrate gpio_dump to common module

Since the meaning of config-bits is the same for scx200 and pc8736x _gpios, we
can share a function to deliver this to user.  Since it is called via the
vtable, its also completely replaceable.  For now, we keep using printk...
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/i386/kernel/scx200.c

@@ -110,21 +110,6 @@ u32 scx200_gpio_configure(unsigned index, u32 mask, u32 bits)
 	return config;
 }
 
-void scx200_gpio_dump(unsigned index)
-{
-        u32 config = scx200_gpio_configure(index, ~0, 0);
-
-        printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
-               index, (unsigned long) config,
-               (config & 1) ? "OE"      : "TS",		/* output enabled / tristate */
-               (config & 2) ? "PP"      : "OD",		/* push pull / open drain */
-               (config & 4) ? "PUE"     : "PUD",	/* pull up enabled/disabled */
-               (config & 8) ? "LOCKED"  : "",		/* locked / unlocked */
-               (config & 16) ? "LEVEL"  : "EDGE",	/* level/edge input */
-               (config & 32) ? "HI"     : "LO",		/* trigger on rising/falling edge */
-               (config & 64) ? "DEBOUNCE" : "");	/* debounce */
-}
-
 static int __init scx200_init(void)
 {
 	printk(KERN_INFO NAME ": NatSemi SCx200 Driver\n");
@@ -144,5 +129,4 @@ module_exit(scx200_cleanup);
 EXPORT_SYMBOL(scx200_gpio_base);
 EXPORT_SYMBOL(scx200_gpio_shadow);
 EXPORT_SYMBOL(scx200_gpio_configure);
-EXPORT_SYMBOL(scx200_gpio_dump);
 EXPORT_SYMBOL(scx200_cb_base);

drivers/char/nsc_gpio.c

@@ -19,6 +19,19 @@
 
 #define NAME "nsc_gpio"
 
+void nsc_gpio_dump(unsigned index, u32 config)
+{
+	printk(KERN_INFO NAME ": GPIO-%02u: 0x%08lx %s %s %s %s %s %s %s\n",
+	       index, (unsigned long)config,
+	       (config & 1) ? "OE" : "TS",      /* output-enabled/tristate */
+	       (config & 2) ? "PP" : "OD",      /* push pull / open drain */
+	       (config & 4) ? "PUE" : "PUD",    /* pull up enabled/disabled */
+	       (config & 8) ? "LOCKED" : "",    /* locked / unlocked */
+	       (config & 16) ? "LEVEL" : "EDGE",/* level/edge input */
+	       (config & 32) ? "HI" : "LO",     /* trigger on rise/fall edge */
+	       (config & 64) ? "DEBOUNCE" : "");        /* debounce */
+}
+
 ssize_t nsc_gpio_write(struct file *file, const char __user *data,
 		       size_t len, loff_t *ppos)
 {
@@ -99,9 +112,10 @@ ssize_t nsc_gpio_read(struct file *file, char __user * buf,
 	return 1;
 }
 
-/* common routines for both scx200_gpio and pc87360_gpio */
+/* common file-ops routines for both scx200_gpio and pc87360_gpio */
 EXPORT_SYMBOL(nsc_gpio_write);
 EXPORT_SYMBOL(nsc_gpio_read);
+EXPORT_SYMBOL(nsc_gpio_dump);
 
 static int __init nsc_gpio_init(void)
 {

drivers/char/scx200_gpio.c

@@ -35,7 +35,7 @@ static int major = 0;		/* default to dynamic major */
 module_param(major, int, 0);
 MODULE_PARM_DESC(major, "Major device number");
 
-extern void scx200_gpio_dump(unsigned index);
+extern void nsc_gpio_dump(unsigned index);
 
 extern ssize_t nsc_gpio_write(struct file *file, const char __user *data,
 			      size_t len, loff_t *ppos);
@@ -46,7 +46,7 @@ extern ssize_t nsc_gpio_read(struct file *file, char __user *buf,
 struct nsc_gpio_ops scx200_access = {
 	.owner		= THIS_MODULE,
 	.gpio_config	= scx200_gpio_configure,
-	.gpio_dump	= scx200_gpio_dump,
+	.gpio_dump	= nsc_gpio_dump,
 	.gpio_get	= scx200_gpio_get,
 	.gpio_set	= scx200_gpio_set,
 	.gpio_set_high	= scx200_gpio_set_high,