ARM: LPAE: use phys_addr_t in switch_mm()

This patch modifies the switch_mm() processor functions to use phys_addr_t.
On LPAE systems, we now honor the upper 32-bits of the physical address that
is being passed in, and program these into TTBR as expected.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Subash Patel <subash.rp@samsung.com>
[will: fixed up conflict in 3-level switch_mm with big-endian changes]
Signed-off-by: Will Deacon <will.deacon@arm.com>

arch/arm/include/asm/proc-fns.h

@@ -60,7 +60,7 @@ extern struct processor {
 	/*
 	 * Set the page table
 	 */
-	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+	void (*switch_mm)(phys_addr_t pgd_phys, struct mm_struct *mm);
 	/*
 	 * Set a possibly extended PTE.  Non-extended PTEs should
 	 * ignore 'ext'.
@@ -82,7 +82,7 @@ extern void cpu_proc_init(void);
 extern void cpu_proc_fin(void);
 extern int cpu_do_idle(void);
 extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_do_switch_mm(phys_addr_t pgd_phys, struct mm_struct *mm);
 #ifdef CONFIG_ARM_LPAE
 extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte);
 #else

arch/arm/mm/proc-v7-3level.S

@@ -39,6 +39,14 @@
 #define TTB_FLAGS_SMP	(TTB_IRGN_WBWA|TTB_S|TTB_RGN_OC_WBWA)
 #define PMD_FLAGS_SMP	(PMD_SECT_WBWA|PMD_SECT_S)
 
+#ifndef __ARMEB__
+#  define rpgdl	r0
+#  define rpgdh	r1
+#else
+#  define rpgdl	r1
+#  define rpgdh	r0
+#endif
+
 /*
  * cpu_v7_switch_mm(pgd_phys, tsk)
  *
@@ -47,10 +55,10 @@
  */
 ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_MMU
-	mmid	r1, r1				@ get mm->context.id
-	asid	r3, r1
-	mov	r3, r3, lsl #(48 - 32)		@ ASID
-	mcrr	p15, 0, r0, r3, c2		@ set TTB 0
+	mmid	r2, r2
+	asid	r2, r2
+	orr	rpgdh, rpgdh, r2, lsl #(48 - 32)	@ upper 32-bits of pgd
+	mcrr	p15, 0, rpgdl, rpgdh, c2		@ set TTB 0
 	isb
 #endif
 	mov	pc, lr