Commit 46184415 authored by David E. Box's avatar David E. Box Committed by H. Peter Anvin

arch: x86: New MailBox support driver for Intel SOC's

Current Intel SOC cores use a MailBox Interface (MBI) to provide access to
configuration registers on devices (called units) connected to the system
fabric. This is a support driver that implements access to this interface on
those platforms that can enumerate the device using PCI. Initial support is for
BayTrail, for which port definitons are provided. This is a requirement for
implementing platform specific features (e.g. RAPL driver requires this to
perform platform specific power management using the registers in PUNIT).
Dependant modules should select IOSF_MBI in their respective Kconfig
configuraiton. Serialized access is handled by all exported routines with
spinlocks.

The API includes 3 functions for access to unit registers:

int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)

port:	indicating the unit being accessed
opcode:	the read or write port specific opcode
offset:	the register offset within the port
mdr:	the register data to be read, written, or modified
mask:	bit locations in mdr to change

Returns nonzero on error

Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: default avatarDavid E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1389216471-734-1-git-send-email-david.e.box@linux.intel.comSigned-off-by: default avatarH. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
parent d6e0a2dd
...@@ -2393,6 +2393,14 @@ config X86_DMA_REMAP ...@@ -2393,6 +2393,14 @@ config X86_DMA_REMAP
bool bool
depends on STA2X11 depends on STA2X11
config IOSF_MBI
bool
depends on PCI
---help---
To be selected by modules requiring access to the Intel OnChip System
Fabric (IOSF) Sideband MailBox Interface (MBI). For MBI platforms
enumerable by PCI.
source "net/Kconfig" source "net/Kconfig"
source "drivers/Kconfig" source "drivers/Kconfig"
......
/*
* iosf_mbi.h: Intel OnChip System Fabric MailBox access support
*/
#ifndef IOSF_MBI_SYMS_H
#define IOSF_MBI_SYMS_H
#define MBI_MCR_OFFSET 0xD0
#define MBI_MDR_OFFSET 0xD4
#define MBI_MCRX_OFFSET 0xD8
#define MBI_RD_MASK 0xFEFFFFFF
#define MBI_WR_MASK 0X01000000
#define MBI_MASK_HI 0xFFFFFF00
#define MBI_MASK_LO 0x000000FF
#define MBI_ENABLE 0xF0
/* Baytrail available units */
#define BT_MBI_UNIT_AUNIT 0x00
#define BT_MBI_UNIT_SMC 0x01
#define BT_MBI_UNIT_CPU 0x02
#define BT_MBI_UNIT_BUNIT 0x03
#define BT_MBI_UNIT_PMC 0x04
#define BT_MBI_UNIT_GFX 0x06
#define BT_MBI_UNIT_SMI 0x0C
#define BT_MBI_UNIT_USB 0x43
#define BT_MBI_UNIT_SATA 0xA3
#define BT_MBI_UNIT_PCIE 0xA6
/* Baytrail read/write opcodes */
#define BT_MBI_AUNIT_READ 0x10
#define BT_MBI_AUNIT_WRITE 0x11
#define BT_MBI_SMC_READ 0x10
#define BT_MBI_SMC_WRITE 0x11
#define BT_MBI_CPU_READ 0x10
#define BT_MBI_CPU_WRITE 0x11
#define BT_MBI_BUNIT_READ 0x10
#define BT_MBI_BUNIT_WRITE 0x11
#define BT_MBI_PMC_READ 0x06
#define BT_MBI_PMC_WRITE 0x07
#define BT_MBI_GFX_READ 0x00
#define BT_MBI_GFX_WRITE 0x01
#define BT_MBI_SMIO_READ 0x06
#define BT_MBI_SMIO_WRITE 0x07
#define BT_MBI_USB_READ 0x06
#define BT_MBI_USB_WRITE 0x07
#define BT_MBI_SATA_READ 0x00
#define BT_MBI_SATA_WRITE 0x01
#define BT_MBI_PCIE_READ 0x00
#define BT_MBI_PCIE_WRITE 0x01
/**
* iosf_mbi_read() - MailBox Interface read command
* @port: port indicating subunit being accessed
* @opcode: port specific read or write opcode
* @offset: register address offset
* @mdr: register data to be read
*
* Locking is handled by spinlock - cannot sleep.
* Return: Nonzero on error
*/
int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr);
/**
* iosf_mbi_write() - MailBox unmasked write command
* @port: port indicating subunit being accessed
* @opcode: port specific read or write opcode
* @offset: register address offset
* @mdr: register data to be written
*
* Locking is handled by spinlock - cannot sleep.
* Return: Nonzero on error
*/
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr);
/**
* iosf_mbi_modify() - MailBox masked write command
* @port: port indicating subunit being accessed
* @opcode: port specific read or write opcode
* @offset: register address offset
* @mdr: register data being modified
* @mask: mask indicating bits in mdr to be modified
*
* Locking is handled by spinlock - cannot sleep.
* Return: Nonzero on error
*/
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask);
#endif /* IOSF_MBI_SYMS_H */
...@@ -111,6 +111,7 @@ obj-$(CONFIG_EFI) += sysfb_efi.o ...@@ -111,6 +111,7 @@ obj-$(CONFIG_EFI) += sysfb_efi.o
obj-$(CONFIG_PERF_EVENTS) += perf_regs.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
obj-$(CONFIG_TRACING) += tracepoint.o obj-$(CONFIG_TRACING) += tracepoint.o
obj-$(CONFIG_IOSF_MBI) += iosf_mbi.o
### ###
# 64 bit specific files # 64 bit specific files
......
/*
* IOSF-SB MailBox Interface Driver
* Copyright (c) 2013, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*
* The IOSF-SB is a fabric bus available on Atom based SOC's that uses a
* mailbox interface (MBI) to communicate with mutiple devices. This
* driver implements access to this interface for those platforms that can
* enumerate the device using PCI.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <asm/iosf_mbi.h>
static DEFINE_SPINLOCK(iosf_mbi_lock);
static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset)
{
return (op << 24) | (port << 16) | (offset << 8) | MBI_ENABLE;
}
static struct pci_dev *mbi_pdev; /* one mbi device */
static int iosf_mbi_pci_read_mdr(u32 mcrx, u32 mcr, u32 *mdr)
{
int result;
if (!mbi_pdev)
return -ENODEV;
if (mcrx) {
result = pci_write_config_dword(mbi_pdev, MBI_MCRX_OFFSET,
mcrx);
if (result < 0)
goto fail_read;
}
result = pci_write_config_dword(mbi_pdev, MBI_MCR_OFFSET, mcr);
if (result < 0)
goto fail_read;
result = pci_read_config_dword(mbi_pdev, MBI_MDR_OFFSET, mdr);
if (result < 0)
goto fail_read;
return 0;
fail_read:
dev_err(&mbi_pdev->dev, "PCI config access failed with %d\n", result);
return result;
}
static int iosf_mbi_pci_write_mdr(u32 mcrx, u32 mcr, u32 mdr)
{
int result;
if (!mbi_pdev)
return -ENODEV;
result = pci_write_config_dword(mbi_pdev, MBI_MDR_OFFSET, mdr);
if (result < 0)
goto fail_write;
if (mcrx) {
result = pci_write_config_dword(mbi_pdev, MBI_MCRX_OFFSET,
mcrx);
if (result < 0)
goto fail_write;
}
result = pci_write_config_dword(mbi_pdev, MBI_MCR_OFFSET, mcr);
if (result < 0)
goto fail_write;
return 0;
fail_write:
dev_err(&mbi_pdev->dev, "PCI config access failed with %d\n", result);
return result;
}
int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
{
u32 mcr, mcrx;
unsigned long flags;
int ret;
/*Access to the GFX unit is handled by GPU code */
if (port == BT_MBI_UNIT_GFX) {
WARN_ON(1);
return -EPERM;
}
mcr = iosf_mbi_form_mcr(opcode, port, offset & MBI_MASK_LO);
mcrx = offset & MBI_MASK_HI;
spin_lock_irqsave(&iosf_mbi_lock, flags);
ret = iosf_mbi_pci_read_mdr(mcrx, mcr, mdr);
spin_unlock_irqrestore(&iosf_mbi_lock, flags);
return ret;
}
EXPORT_SYMBOL(iosf_mbi_read);
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
{
u32 mcr, mcrx;
unsigned long flags;
int ret;
/*Access to the GFX unit is handled by GPU code */
if (port == BT_MBI_UNIT_GFX) {
WARN_ON(1);
return -EPERM;
}
mcr = iosf_mbi_form_mcr(opcode, port, offset & MBI_MASK_LO);
mcrx = offset & MBI_MASK_HI;
spin_lock_irqsave(&iosf_mbi_lock, flags);
ret = iosf_mbi_pci_write_mdr(mcrx, mcr, mdr);
spin_unlock_irqrestore(&iosf_mbi_lock, flags);
return ret;
}
EXPORT_SYMBOL(iosf_mbi_write);
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
{
u32 mcr, mcrx;
u32 value;
unsigned long flags;
int ret;
/*Access to the GFX unit is handled by GPU code */
if (port == BT_MBI_UNIT_GFX) {
WARN_ON(1);
return -EPERM;
}
mcr = iosf_mbi_form_mcr(opcode, port, offset & MBI_MASK_LO);
mcrx = offset & MBI_MASK_HI;
spin_lock_irqsave(&iosf_mbi_lock, flags);
/* Read current mdr value */
ret = iosf_mbi_pci_read_mdr(mcrx, mcr & MBI_RD_MASK, &value);
if (ret < 0) {
spin_unlock_irqrestore(&iosf_mbi_lock, flags);
return ret;
}
/* Apply mask */
value &= ~mask;
mdr &= mask;
value |= mdr;
/* Write back */
ret = iosf_mbi_pci_write_mdr(mcrx, mcr | MBI_WR_MASK, value);
spin_unlock_irqrestore(&iosf_mbi_lock, flags);
return ret;
}
EXPORT_SYMBOL(iosf_mbi_modify);
static int iosf_mbi_probe(struct pci_dev *pdev,
const struct pci_device_id *unused)
{
int ret;
ret = pci_enable_device(pdev);
if (ret < 0) {
dev_err(&pdev->dev, "error: could not enable device\n");
return ret;
}
mbi_pdev = pci_dev_get(pdev);
return 0;
}
static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids);
static struct pci_driver iosf_mbi_pci_driver = {
.name = "iosf_mbi_pci",
.probe = iosf_mbi_probe,
.id_table = iosf_mbi_pci_ids,
};
static int __init iosf_mbi_init(void)
{
return pci_register_driver(&iosf_mbi_pci_driver);
}
static void __exit iosf_mbi_exit(void)
{
pci_unregister_driver(&iosf_mbi_pci_driver);
if (mbi_pdev) {
pci_dev_put(mbi_pdev);
mbi_pdev = NULL;
}
}
module_init(iosf_mbi_init);
module_exit(iosf_mbi_exit);
MODULE_AUTHOR("David E. Box <david.e.box@linux.intel.com>");
MODULE_DESCRIPTION("IOSF Mailbox Interface accessor");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment