Commit 46323e11 authored by Ivo van Doorn's avatar Ivo van Doorn Committed by John W. Linville

rt2x00: Fix channel configuration for RF3052

We missed a check for RF3052 in the config_channel
configuration function. As a result the channel is not
properly configured for RF3052 devices. This also
requires rt2800_config_channel_rf3xxx to support 5GHz
channels, so we must apply the TXPOWER_A_TO_DEV and
TXPOWER_G_TO_DEV conversions during rt2800_config_channel()
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Acked-by: default avatarHelmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent b9a07ae9
......@@ -1244,8 +1244,7 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
if (info->tx_power1 < 0)
info->tx_power1 += 7;
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
TXPOWER_A_TO_DEV(info->tx_power1));
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->tx_power1);
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
(info->tx_power2 >= 0));
......@@ -1253,13 +1252,10 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
if (info->tx_power2 < 0)
info->tx_power2 += 7;
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
TXPOWER_A_TO_DEV(info->tx_power2));
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->tx_power2);
} else {
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
TXPOWER_G_TO_DEV(info->tx_power1));
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
TXPOWER_G_TO_DEV(info->tx_power2));
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->tx_power1);
rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->tx_power2);
}
rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
......@@ -1299,13 +1295,11 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
TXPOWER_G_TO_DEV(info->tx_power1));
rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->tx_power1);
rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
TXPOWER_G_TO_DEV(info->tx_power2));
rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->tx_power2);
rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
......@@ -1329,10 +1323,19 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
unsigned int tx_pin;
u8 bbp;
if (rf->channel <= 14) {
info->tx_power1 = TXPOWER_G_TO_DEV(info->tx_power1);
info->tx_power2 = TXPOWER_G_TO_DEV(info->tx_power2);
} else {
info->tx_power1 = TXPOWER_A_TO_DEV(info->tx_power1);
info->tx_power2 = TXPOWER_A_TO_DEV(info->tx_power2);
}
if (rt2x00_rf(rt2x00dev, RF2020) ||
rt2x00_rf(rt2x00dev, RF3020) ||
rt2x00_rf(rt2x00dev, RF3021) ||
rt2x00_rf(rt2x00dev, RF3022))
rt2x00_rf(rt2x00dev, RF3022) ||
rt2x00_rf(rt2x00dev, RF3052))
rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
else
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment