rt2x00: Fix channel configuration for RF3052

We missed a check for RF3052 in the config_channel
configuration function. As a result the channel is not
properly configured for RF3052 devices. This also
requires rt2800_config_channel_rf3xxx to support 5GHz
channels, so we must apply the TXPOWER_A_TO_DEV and
TXPOWER_G_TO_DEV conversions during rt2800_config_channel()
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -1244,8 +1244,7 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
 		if (info->tx_power1 < 0)
 			info->tx_power1 += 7;
 
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power1));
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->tx_power1);
 
 		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
 				   (info->tx_power2 >= 0));
@@ -1253,13 +1252,10 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
 		if (info->tx_power2 < 0)
 			info->tx_power2 += 7;
 
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
-				   TXPOWER_A_TO_DEV(info->tx_power2));
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->tx_power2);
 	} else {
-		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power1));
-		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
-				   TXPOWER_G_TO_DEV(info->tx_power2));
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->tx_power1);
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->tx_power2);
 	}
 
 	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
@@ -1299,13 +1295,11 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev,
 	rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
 
 	rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
-			  TXPOWER_G_TO_DEV(info->tx_power1));
+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->tx_power1);
 	rt2800_rfcsr_write(rt2x00dev, 12, rfcsr);
 
 	rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr);
-	rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER,
-			  TXPOWER_G_TO_DEV(info->tx_power2));
+	rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->tx_power2);
 	rt2800_rfcsr_write(rt2x00dev, 13, rfcsr);
 
 	rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr);
@@ -1329,10 +1323,19 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	unsigned int tx_pin;
 	u8 bbp;
 
+	if (rf->channel <= 14) {
+		info->tx_power1 = TXPOWER_G_TO_DEV(info->tx_power1);
+		info->tx_power2 = TXPOWER_G_TO_DEV(info->tx_power2);
+	} else {
+		info->tx_power1 = TXPOWER_A_TO_DEV(info->tx_power1);
+		info->tx_power2 = TXPOWER_A_TO_DEV(info->tx_power2);
+	}
+
 	if (rt2x00_rf(rt2x00dev, RF2020) ||
 	    rt2x00_rf(rt2x00dev, RF3020) ||
 	    rt2x00_rf(rt2x00dev, RF3021) ||
-	    rt2x00_rf(rt2x00dev, RF3022))
+	    rt2x00_rf(rt2x00dev, RF3022) ||
+	    rt2x00_rf(rt2x00dev, RF3052))
 		rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
 	else
 		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);