Merge tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some IIO and staging driver fixes for 4.0-rc3.

  Details are in the shortlog, nothing major, mostly IIO fixes for
  reported issues.

  All have been in linux-next successfully"

* tag 'staging-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
  staging: comedi: adv_pci1710: fix AI INSN_READ for non-zero channel
  staging: comedi: vmk80xx: remove "firmware version" kernel messages
  staging: comedi: comedi_isadma: fix "stalled" detect in comedi_isadma_disable_on_sample()
  iio: ak8975: fix AK09911 dependencies
  iio: common: ssp_sensors: Protect PM-only functions to kill warning
  IIO: si7020: Allocate correct amount of memory in devm_iio_device_alloc
  Revert "iio:humidity:si7020: fix pointer to i2c client"
  iio: light: gp2ap020a00f: Select REGMAP_I2C
  iio: light: jsa1212: Select REGMAP_I2C
  iio: ad5686: fix optional reference voltage declaration
  iio:adc:mcp3422 Fix incorrect scales table
  iio: mxs-lradc: fix iio channel map regression
  iio: imu: adis16400: Fix sign extension
  staging: iio: ad2s1200: Fix sign extension
  iio: mxs-lradc: only update the buffer when its conversions have finished
  iio: mxs-lradc: make ADC reads not unschedule touchscreen conversions
  iio: mxs-lradc: make ADC reads not disable touchscreen interrupts
  iio: mxs-lradc: separate touchscreen and buffer virtual channels
  iio: imu: inv_mpu6050: Prevent dereferencing NULL
  iio: iadc: wait_for_completion_timeout time in jiffies
  ...

drivers/iio/adc/mcp3422.c

@@ -58,20 +58,11 @@
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 	}
 
-/* LSB is in nV to eliminate floating point */
-static const u32 rates_to_lsb[] = {1000000, 250000, 62500, 15625};
-
-/*
- *  scales calculated as:
- *  rates_to_lsb[sample_rate] / (1 << pga);
- *  pga is 1 for 0, 2
- */
-
 static const int mcp3422_scales[4][4] = {
-	{ 1000000, 250000, 62500, 15625 },
-	{ 500000 , 125000, 31250, 7812 },
-	{ 250000 , 62500 , 15625, 3906 },
-	{ 125000 , 31250 , 7812 , 1953 } };
+	{ 1000000, 500000, 250000, 125000 },
+	{ 250000 , 125000, 62500 , 31250  },
+	{ 62500  , 31250 , 15625 , 7812   },
+	{ 15625  , 7812  , 3906  , 1953   } };
 
 /* Constant msleep times for data acquisitions */
 static const int mcp3422_read_times[4] = {

drivers/iio/adc/qcom-spmi-iadc.c

@@ -296,7 +296,8 @@ static int iadc_do_conversion(struct iadc_chip *iadc, int chan, u16 *data)
 	if (iadc->poll_eoc) {
 		ret = iadc_poll_wait_eoc(iadc, wait);
 	} else {
-		ret = wait_for_completion_timeout(&iadc->complete, wait);
+		ret = wait_for_completion_timeout(&iadc->complete,
+			usecs_to_jiffies(wait));
 		if (!ret)
 			ret = -ETIMEDOUT;
 		else

drivers/iio/common/ssp_sensors/ssp_dev.c

@@ -640,6 +640,7 @@ static int ssp_remove(struct spi_device *spi)
 	return 0;
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int ssp_suspend(struct device *dev)
 {
 	int ret;
@@ -688,6 +689,7 @@ static int ssp_resume(struct device *dev)
 
 	return 0;
 }
+#endif /* CONFIG_PM_SLEEP */
 
 static const struct dev_pm_ops ssp_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(ssp_suspend, ssp_resume)

drivers/iio/dac/ad5686.c

@@ -322,7 +322,7 @@ static int ad5686_probe(struct spi_device *spi)
 	st = iio_priv(indio_dev);
 	spi_set_drvdata(spi, indio_dev);
 
-	st->reg = devm_regulator_get(&spi->dev, "vcc");
+	st->reg = devm_regulator_get_optional(&spi->dev, "vcc");
 	if (!IS_ERR(st->reg)) {
 		ret = regulator_enable(st->reg);
 		if (ret)

drivers/iio/humidity/dht11.c

@@ -29,6 +29,7 @@
 #include <linux/wait.h>
 #include <linux/bitops.h>
 #include <linux/completion.h>
+#include <linux/mutex.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
@@ -39,8 +40,12 @@
 
 #define DHT11_DATA_VALID_TIME	2000000000  /* 2s in ns */
 
-#define DHT11_EDGES_PREAMBLE 4
+#define DHT11_EDGES_PREAMBLE 2
 #define DHT11_BITS_PER_READ 40
+/*
+ * Note that when reading the sensor actually 84 edges are detected, but
+ * since the last edge is not significant, we only store 83:
+ */
 #define DHT11_EDGES_PER_READ (2*DHT11_BITS_PER_READ + DHT11_EDGES_PREAMBLE + 1)
 
 /* Data transmission timing (nano seconds) */
@@ -57,6 +62,7 @@ struct dht11 {
 	int				irq;
 
 	struct completion		completion;
+	struct mutex			lock;
 
 	s64				timestamp;
 	int				temperature;
@@ -88,7 +94,7 @@ static int dht11_decode(struct dht11 *dht11, int offset)
 	unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum;
 
 	/* Calculate timestamp resolution */
-	for (i = 0; i < dht11->num_edges; ++i) {
+	for (i = 1; i < dht11->num_edges; ++i) {
 		t = dht11->edges[i].ts - dht11->edges[i-1].ts;
 		if (t > 0 && t < timeres)
 			timeres = t;
@@ -138,6 +144,27 @@ static int dht11_decode(struct dht11 *dht11, int offset)
 	return 0;
 }
 
+/*
+ * IRQ handler called on GPIO edges
+ */
+static irqreturn_t dht11_handle_irq(int irq, void *data)
+{
+	struct iio_dev *iio = data;
+	struct dht11 *dht11 = iio_priv(iio);
+
+	/* TODO: Consider making the handler safe for IRQ sharing */
+	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
+		dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
+		dht11->edges[dht11->num_edges++].value =
+						gpio_get_value(dht11->gpio);
+
+		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
+			complete(&dht11->completion);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static int dht11_read_raw(struct iio_dev *iio_dev,
 			const struct iio_chan_spec *chan,
 			int *val, int *val2, long m)
@@ -145,6 +172,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 	struct dht11 *dht11 = iio_priv(iio_dev);
 	int ret;
 
+	mutex_lock(&dht11->lock);
 	if (dht11->timestamp + DHT11_DATA_VALID_TIME < iio_get_time_ns()) {
 		reinit_completion(&dht11->completion);
 
@@ -157,8 +185,17 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		if (ret)
 			goto err;
 
+		ret = request_irq(dht11->irq, dht11_handle_irq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  iio_dev->name, iio_dev);
+		if (ret)
+			goto err;
+
 		ret = wait_for_completion_killable_timeout(&dht11->completion,
 								 HZ);
+
+		free_irq(dht11->irq, iio_dev);
+
 		if (ret == 0 && dht11->num_edges < DHT11_EDGES_PER_READ - 1) {
 			dev_err(&iio_dev->dev,
 					"Only %d signal edges detected\n",
@@ -185,6 +222,7 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		ret = -EINVAL;
 err:
 	dht11->num_edges = -1;
+	mutex_unlock(&dht11->lock);
 	return ret;
 }
 
@@ -193,27 +231,6 @@ static const struct iio_info dht11_iio_info = {
 	.read_raw		= dht11_read_raw,
 };
 
-/*
- * IRQ handler called on GPIO edges
-*/
-static irqreturn_t dht11_handle_irq(int irq, void *data)
-{
-	struct iio_dev *iio = data;
-	struct dht11 *dht11 = iio_priv(iio);
-
-	/* TODO: Consider making the handler safe for IRQ sharing */
-	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
-		dht11->edges[dht11->num_edges].ts = iio_get_time_ns();
-		dht11->edges[dht11->num_edges++].value =
-						gpio_get_value(dht11->gpio);
-
-		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
-			complete(&dht11->completion);
-	}
-
-	return IRQ_HANDLED;
-}
-
 static const struct iio_chan_spec dht11_chan_spec[] = {
 	{ .type = IIO_TEMP,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), },
@@ -256,11 +273,6 @@ static int dht11_probe(struct platform_device *pdev)
 		dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
 		return -EINVAL;
 	}
-	ret = devm_request_irq(dev, dht11->irq, dht11_handle_irq,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				pdev->name, iio);
-	if (ret)
-		return ret;
 
 	dht11->timestamp = iio_get_time_ns() - DHT11_DATA_VALID_TIME - 1;
 	dht11->num_edges = -1;
@@ -268,6 +280,7 @@ static int dht11_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, iio);
 
 	init_completion(&dht11->completion);
+	mutex_init(&dht11->lock);
 	iio->name = pdev->name;
 	iio->dev.parent = &pdev->dev;
 	iio->info = &dht11_iio_info;

drivers/iio/humidity/si7020.c

@@ -45,12 +45,12 @@ static int si7020_read_raw(struct iio_dev *indio_dev,
 			   struct iio_chan_spec const *chan, int *val,
 			   int *val2, long mask)
 {
-	struct i2c_client *client = iio_priv(indio_dev);
+	struct i2c_client **client = iio_priv(indio_dev);
 	int ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = i2c_smbus_read_word_data(client,
+		ret = i2c_smbus_read_word_data(*client,
 					       chan->type == IIO_TEMP ?
 					       SI7020CMD_TEMP_HOLD :
 					       SI7020CMD_RH_HOLD);
@@ -126,7 +126,7 @@ static int si7020_probe(struct i2c_client *client,
 	/* Wait the maximum power-up time after software reset. */
 	msleep(15);
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client));
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 

drivers/iio/imu/adis16400_core.c

@@ -26,6 +26,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/debugfs.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -414,7 +415,7 @@ static int adis16400_read_raw(struct iio_dev *indio_dev,
 		mutex_unlock(&indio_dev->mlock);
 		if (ret)
 			return ret;
-		val16 = ((val16 & 0xFFF) << 4) >> 4;
+		val16 = sign_extend32(val16, 11);
 		*val = val16;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -780,7 +780,11 @@ static int inv_mpu_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, indio_dev);
 	indio_dev->dev.parent = &client->dev;
-	indio_dev->name = id->name;
+	/* id will be NULL when enumerated via ACPI */
+	if (id)
+		indio_dev->name = (char *)id->name;
+	else
+		indio_dev->name = (char *)dev_name(&client->dev);
 	indio_dev->channels = inv_mpu_channels;
 	indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
 

drivers/iio/light/Kconfig

@@ -73,6 +73,7 @@ config CM36651
 config GP2AP020A00F
 	tristate "Sharp GP2AP020A00F Proximity/ALS sensor"
 	depends on I2C
+	select REGMAP_I2C
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER
 	select IRQ_WORK
@@ -126,6 +127,7 @@ config HID_SENSOR_PROX
 config JSA1212
 	tristate "JSA1212 ALS and proximity sensor driver"
 	depends on I2C
+	select REGMAP_I2C
 	help
 	 Say Y here if you want to build a IIO driver for JSA1212
 	 proximity & ALS sensor device.

drivers/iio/magnetometer/Kconfig

@@ -18,6 +18,8 @@ config AK8975
 
 config AK09911
 	tristate "Asahi Kasei AK09911 3-axis Compass"
+	depends on I2C
+	depends on GPIOLIB
 	select AK8975
 	help
 	  Deprecated: AK09911 is now supported by AK8975 driver.

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -426,7 +426,6 @@ static int pci171x_ai_insn_read(struct comedi_device *dev,
 				unsigned int *data)
 {
 	struct pci1710_private *devpriv = dev->private;
-	unsigned int chan = CR_CHAN(insn->chanspec);
 	int ret = 0;
 	int i;
 
@@ -447,7 +446,7 @@ static int pci171x_ai_insn_read(struct comedi_device *dev,
 		if (ret)
 			break;
 
-		ret = pci171x_ai_read_sample(dev, s, chan, &val);
+		ret = pci171x_ai_read_sample(dev, s, 0, &val);
 		if (ret)
 			break;
 

drivers/staging/comedi/drivers/comedi_isadma.c

@@ -91,9 +91,10 @@ unsigned int comedi_isadma_disable_on_sample(unsigned int dma_chan,
 			stalled++;
 			if (stalled > 10)
 				break;
+		} else {
+			residue = new_residue;
+			stalled = 0;
 		}
-		residue = new_residue;
-		stalled = 0;
 	}
 	return residue;
 }

drivers/staging/comedi/drivers/vmk80xx.c

@@ -103,11 +103,6 @@ enum vmk80xx_model {
 	VMK8061_MODEL
 };
 
-struct firmware_version {
-	unsigned char ic3_vers[32];	/* USB-Controller */
-	unsigned char ic6_vers[32];	/* CPU */
-};
-
 static const struct comedi_lrange vmk8061_range = {
 	2, {
 		UNI_RANGE(5),
@@ -156,68 +151,12 @@ static const struct vmk80xx_board vmk80xx_boardinfo[] = {
 struct vmk80xx_private {
 	struct usb_endpoint_descriptor *ep_rx;
 	struct usb_endpoint_descriptor *ep_tx;
-	struct firmware_version fw;
 	struct semaphore limit_sem;
 	unsigned char *usb_rx_buf;
 	unsigned char *usb_tx_buf;
 	enum vmk80xx_model model;
 };
 
-static int vmk80xx_check_data_link(struct comedi_device *dev)
-{
-	struct vmk80xx_private *devpriv = dev->private;
-	struct usb_device *usb = comedi_to_usb_dev(dev);
-	unsigned int tx_pipe;
-	unsigned int rx_pipe;
-	unsigned char tx[1];
-	unsigned char rx[2];
-
-	tx_pipe = usb_sndbulkpipe(usb, 0x01);
-	rx_pipe = usb_rcvbulkpipe(usb, 0x81);
-
-	tx[0] = VMK8061_CMD_RD_PWR_STAT;
-
-	/*
-	 * Check that IC6 (PIC16F871) is powered and
-	 * running and the data link between IC3 and
-	 * IC6 is working properly
-	 */
-	usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, rx, 2, NULL, HZ * 10);
-
-	return (int)rx[1];
-}
-
-static void vmk80xx_read_eeprom(struct comedi_device *dev, int flag)
-{
-	struct vmk80xx_private *devpriv = dev->private;
-	struct usb_device *usb = comedi_to_usb_dev(dev);
-	unsigned int tx_pipe;
-	unsigned int rx_pipe;
-	unsigned char tx[1];
-	unsigned char rx[64];
-	int cnt;
-
-	tx_pipe = usb_sndbulkpipe(usb, 0x01);
-	rx_pipe = usb_rcvbulkpipe(usb, 0x81);
-
-	tx[0] = VMK8061_CMD_RD_VERSION;
-
-	/*
-	 * Read the firmware version info of IC3 and
-	 * IC6 from the internal EEPROM of the IC
-	 */
-	usb_bulk_msg(usb, tx_pipe, tx, 1, NULL, devpriv->ep_tx->bInterval);
-	usb_bulk_msg(usb, rx_pipe, rx, 64, &cnt, HZ * 10);
-
-	rx[cnt] = '\0';
-
-	if (flag & IC3_VERSION)
-		strncpy(devpriv->fw.ic3_vers, rx + 1, 24);
-	else			/* IC6_VERSION */
-		strncpy(devpriv->fw.ic6_vers, rx + 25, 24);
-}
-
 static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
 {
 	struct vmk80xx_private *devpriv = dev->private;
@@ -878,16 +817,6 @@ static int vmk80xx_auto_attach(struct comedi_device *dev,
 
 	usb_set_intfdata(intf, devpriv);
 
-	if (devpriv->model == VMK8061_MODEL) {
-		vmk80xx_read_eeprom(dev, IC3_VERSION);
-		dev_info(&intf->dev, "%s\n", devpriv->fw.ic3_vers);
-
-		if (vmk80xx_check_data_link(dev)) {
-			vmk80xx_read_eeprom(dev, IC6_VERSION);
-			dev_info(&intf->dev, "%s\n", devpriv->fw.ic6_vers);
-		}
-	}
-
 	if (devpriv->model == VMK8055_MODEL)
 		vmk80xx_reset_device(dev);
 

drivers/staging/iio/resolver/ad2s1200.c

@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/module.h>
+#include <linux/bitops.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -68,7 +69,7 @@ static int ad2s1200_read_raw(struct iio_dev *indio_dev,
 		break;
 	case IIO_ANGL_VEL:
 		vel = (((s16)(st->rx[0])) << 4) | ((st->rx[1] & 0xF0) >> 4);
-		vel = (vel << 4) >> 4;
+		vel = sign_extend32(vel, 11);
 		*val = vel;
 		break;
 	default: