Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits)
  MAINTAINERS: add a maintainer to Gadget Framework
  USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver
  Revert "USB: option: add ID for ZTE MF 330"
  drivers/usb/host/ohci-pxa27x.c: add missing clk_put
  USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurable
  USB: dummy-hcd needs the has_tt flag
  usb-storage: redo incorrect reads
  usb/renesas_usbhs: free uep on removal
  usb/s3c-hsudc: fix error path
  usb/pxa25x_udc: cleanup the LUBBOCK err path
  usb/mv_udc_core: fix compile
  usb: gadget: include <linux/prefetch.h> to fix compiling error
  USB: s3c-hsotg: Tone down debugging
  usb: remove bad dput after dentry_unhash
  USB: core: Tolerate protocol stall during hub and port status read
  musb: fix prefetch build failure
  USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7
  usb-gadget: unlock data->lock mutex on error path in ep_write()
  USB: option Add blacklist for ZTE K3765-Z (19d2:2002)
  option: add Prolink PH300 modem IDs
  ...

Documentation/kernel-parameters.txt

@@ -2598,6 +2598,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					unlock ejectable media);
 				m = MAX_SECTORS_64 (don't transfer more
 					than 64 sectors = 32 KB at a time);
+				n = INITIAL_READ10 (force a retry of the
+					initial READ(10) command);
 				o = CAPACITY_OK (accept the capacity
 					reported by the device);
 				r = IGNORE_RESIDUE (the device reports

MAINTAINERS

@@ -6444,9 +6444,11 @@ S:	Maintained
 F:	drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
+M:	Felipe Balbi <balbi@ti.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
-S:	Orphan
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
+S:	Maintained
 F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 

drivers/usb/class/cdc-acm.c

@@ -1530,6 +1530,8 @@ static const struct usb_device_id acm_ids[] = {
 	{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
 	{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */
+	{ NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
 	{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
 
 	/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */

drivers/usb/core/hub.c

@@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev,
 {
 	int i, status = -ETIMEDOUT;
 
-	for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
 		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
 			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
 			data, sizeof(*data), USB_STS_TIMEOUT);
@@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1,
 {
 	int i, status = -ETIMEDOUT;
 
-	for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+	for (i = 0; i < USB_STS_RETRIES &&
+			(status == -ETIMEDOUT || status == -EPIPE); i++) {
 		status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
 			USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
 			data, sizeof(*data), USB_STS_TIMEOUT);

drivers/usb/gadget/Kconfig

@@ -632,13 +632,10 @@ config USB_DUMMY_HCD
 
 endchoice
 
+# Selected by UDC drivers that support high-speed operation.
 config USB_GADGET_DUALSPEED
 	bool
 	depends on USB_GADGET
-	default n
-	help
-	  Means that gadget drivers should include extra descriptors
-	  and code to handle dual-speed controllers.
 
 #
 # USB Gadget Drivers

drivers/usb/gadget/amd5536udc.c

@@ -60,6 +60,7 @@
 #include <linux/device.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <asm/system.h>

drivers/usb/gadget/at91_udc.c

@@ -38,6 +38,7 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <mach/hardware.h>

drivers/usb/gadget/dummy_hcd.c

@@ -1906,6 +1906,7 @@ static int dummy_hcd_probe(struct platform_device *pdev)
 	if (!hcd)
 		return -ENOMEM;
 	the_controller = hcd_to_dummy (hcd);
+	hcd->has_tt = 1;
 
 	retval = usb_add_hcd(hcd, 0, 0);
 	if (retval != 0) {

drivers/usb/gadget/inode.c

@@ -431,8 +431,10 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	/* halt any endpoint by doing a "wrong direction" i/o call */
 	if (!usb_endpoint_dir_in(&data->desc)) {
-		if (usb_endpoint_xfer_isoc(&data->desc))
+		if (usb_endpoint_xfer_isoc(&data->desc)) {
+			mutex_unlock(&data->lock);
 			return -EINVAL;
+		}
 		DBG (data->dev, "%s halt\n", data->name);
 		spin_lock_irq (&data->dev->lock);
 		if (likely (data->ep != NULL))

drivers/usb/gadget/mv_udc_core.c

@@ -2083,7 +2083,7 @@ int mv_udc_probe(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
+static int mv_udc_suspend(struct device *_dev)
 {
 	struct mv_udc *udc = the_controller;
 
@@ -2092,7 +2092,7 @@ static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
 	return 0;
 }
 
-static int mv_udc_resume(struct platform_device *_dev)
+static int mv_udc_resume(struct device *_dev)
 {
 	struct mv_udc *udc = the_controller;
 	int retval;
@@ -2100,7 +2100,7 @@ static int mv_udc_resume(struct platform_device *_dev)
 	retval = mv_udc_phy_init(udc->phy_regs);
 	if (retval) {
 		dev_err(_dev, "phy initialization error %d\n", retval);
-		goto error;
+		return retval;
 	}
 	udc_reset(udc);
 	ep0_reset(udc);
@@ -2122,7 +2122,7 @@ static struct platform_driver udc_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "pxa-u2o",
 #ifdef CONFIG_PM
-		.pm	= mv_udc_pm_ops,
+		.pm	= &mv_udc_pm_ops,
 #endif
 	},
 };

drivers/usb/gadget/net2280.c

@@ -63,6 +63,7 @@
 #include <linux/device.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>

drivers/usb/gadget/pxa25x_udc.c

@@ -2216,7 +2216,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
 				driver_name, LUBBOCK_USB_DISC_IRQ, retval);
-lubbock_fail0:
 			goto err_irq_lub;
 		}
 		retval = request_irq(LUBBOCK_USB_IRQ,
@@ -2226,7 +2225,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 		if (retval != 0) {
 			pr_err("%s: can't get irq %i, err %d\n",
 				driver_name, LUBBOCK_USB_IRQ, retval);
-			free_irq(LUBBOCK_USB_DISC_IRQ, dev);
 			goto lubbock_fail0;
 		}
 	} else
@@ -2236,10 +2234,11 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	return 0;
 
 #ifdef	CONFIG_ARCH_LUBBOCK
+lubbock_fail0:
 	free_irq(LUBBOCK_USB_DISC_IRQ, dev);
  err_irq_lub:
-#endif
 	free_irq(irq, dev);
+#endif
  err_irq1:
 	if (gpio_is_valid(dev->mach->gpio_pullup))
 		gpio_free(dev->mach->gpio_pullup);

drivers/usb/gadget/s3c-hsotg.c

@@ -2680,9 +2680,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	writel(0, hsotg->regs + S3C_DAINTMSK);
 
-	dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		 readl(hsotg->regs + S3C_DIEPCTL0),
-		 readl(hsotg->regs + S3C_DOEPCTL0));
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + S3C_DIEPCTL0),
+		readl(hsotg->regs + S3C_DOEPCTL0));
 
 	/* enable in and out endpoint interrupts */
 	s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
@@ -2701,7 +2701,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	udelay(10);  /* see openiboot */
 	__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
 
-	dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+	dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
 
 	/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
 	   writing to the EPCTL register.. */
@@ -2721,9 +2721,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	s3c_hsotg_enqueue_setup(hsotg);
 
-	dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		 readl(hsotg->regs + S3C_DIEPCTL0),
-		 readl(hsotg->regs + S3C_DOEPCTL0));
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		readl(hsotg->regs + S3C_DIEPCTL0),
+		readl(hsotg->regs + S3C_DOEPCTL0));
 
 	/* clear global NAKs */
 	writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
@@ -2921,9 +2921,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
 
 	/* setup fifos */
 
-	dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
-		 readl(hsotg->regs + S3C_GRXFSIZ),
-		 readl(hsotg->regs + S3C_GNPTXFSIZ));
+	dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+		readl(hsotg->regs + S3C_GRXFSIZ),
+		readl(hsotg->regs + S3C_GNPTXFSIZ));
 
 	s3c_hsotg_init_fifo(hsotg);
 
@@ -2945,6 +2945,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
 
 static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
 {
+#ifdef DEBUG
 	struct device *dev = hsotg->dev;
 	void __iomem *regs = hsotg->regs;
 	u32 val;
@@ -2987,6 +2988,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
 
 	dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
 		 readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+#endif
 }
 
 

drivers/usb/gadget/s3c-hsudc.c

@@ -26,6 +26,7 @@
 #include <linux/clk.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
 
 #include <mach/regs-s3c2443-clock.h>
 #include <plat/udc.h>
@@ -1301,7 +1302,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	hsudc->uclk = clk_get(&pdev->dev, "usb-device");
 	if (IS_ERR(hsudc->uclk)) {
 		dev_err(dev, "failed to find usb-device clock source\n");
-		return PTR_ERR(hsudc->uclk);
+		ret = PTR_ERR(hsudc->uclk);
+		goto err_clk;
 	}
 	clk_enable(hsudc->uclk);
 
@@ -1310,7 +1312,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
 	disable_irq(hsudc->irq);
 	local_irq_enable();
 	return 0;
-
+err_clk:
+	free_irq(hsudc->irq, hsudc);
 err_irq:
 	iounmap(hsudc->regs);
 

drivers/usb/gadget/s3c2410_udc.c

@@ -36,6 +36,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/prefetch.h>
 
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>

drivers/usb/host/ohci-pxa27x.c

@@ -312,8 +312,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 		return PTR_ERR(usb_clk);
 
 	hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
-	if (!hcd)
-		return -ENOMEM;
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto err0;
+	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!r) {
@@ -368,6 +370,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
 	usb_put_hcd(hcd);
+ err0:
 	clk_put(usb_clk);
 	return retval;
 }

drivers/usb/host/xhci-dbg.c

@@ -438,13 +438,13 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
 	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
 
 	switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
-	case 0:
+	case SLOT_STATE_ENABLED:
 		return "enabled/disabled";
-	case 1:
+	case SLOT_STATE_DEFAULT:
 		return "default";
-	case 2:
+	case SLOT_STATE_ADDRESSED:
 		return "addressed";
-	case 3:
+	case SLOT_STATE_CONFIGURED:
 		return "configured";
 	default:
 		return "reserved";

drivers/usb/host/xhci-mem.c

@@ -985,9 +985,19 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
 	interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
 	if (interval != ep->desc.bInterval - 1)
 		dev_warn(&udev->dev,
-			 "ep %#x - rounding interval to %d microframes\n",
+			 "ep %#x - rounding interval to %d %sframes\n",
 			 ep->desc.bEndpointAddress,
-			 1 << interval);
+			 1 << interval,
+			 udev->speed == USB_SPEED_FULL ? "" : "micro");
+
+	if (udev->speed == USB_SPEED_FULL) {
+		/*
+		 * Full speed isoc endpoints specify interval in frames,
+		 * not microframes. We are using microframes everywhere,
+		 * so adjust accordingly.
+		 */
+		interval += 3;	/* 1 frame = 2^3 uframes */
+	}
 
 	return interval;
 }

drivers/usb/host/xhci-pci.c

@@ -106,12 +106,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 
 	/* Look for vendor-specific quirks */
 	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
-			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
-			pdev->revision == 0x0) {
+			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
+		if (pdev->revision == 0x0) {
 			xhci->quirks |= XHCI_RESET_EP_QUIRK;
 			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
 					" endpoint cmd after reset endpoint\n");
+		}
+		/* Fresco Logic confirms: all revisions of this chip do not
+		 * support MSI, even though some of them claim to in their PCI
+		 * capabilities.
+		 */
+		xhci->quirks |= XHCI_BROKEN_MSI;
+		xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+				"has broken MSI implementation\n",
+				pdev->revision);
 	}
+
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 

drivers/usb/host/xhci-ring.c

@@ -1782,7 +1782,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	struct usb_iso_packet_descriptor *frame;
 	int idx;
 
-	ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+	ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
 	urb_priv = td->urb->hcpriv;
 	idx = urb_priv->td_cnt;
 	frame = &td->urb->iso_frame_desc[idx];

drivers/usb/host/xhci.c

@@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd)
 		free_irq(hcd->irq, hcd);
 	hcd->irq = -1;
 
+	/* Some Fresco Logic host controllers advertise MSI, but fail to
+	 * generate interrupts.  Don't even try to enable MSI.
+	 */
+	if (xhci->quirks & XHCI_BROKEN_MSI)
+		goto legacy_irq;
+
 	ret = xhci_setup_msix(xhci);
 	if (ret)
 		/* fall back to msi*/
 		ret = xhci_setup_msi(xhci);
 
 	if (ret) {
+legacy_irq:
 		/* fall back to legacy interrupt*/
 		ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
 					hcd->irq_descr, hcd);
@@ -1849,8 +1856,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 
 	/* Free any rings that were dropped, but not changed. */
 	for (i = 1; i < 31; ++i) {
-		if ((ctrl_ctx->drop_flags & (1 << (i + 1))) &&
-				!(ctrl_ctx->add_flags & (1 << (i + 1))))
+		if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+		    !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
 			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
 	}
 	xhci_zero_in_ctx(xhci, virt_dev);
@@ -2467,6 +2474,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_command *reset_device_cmd;
 	int timeleft;
 	int last_freed_endpoint;
+	struct xhci_slot_ctx *slot_ctx;
 
 	ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
 	if (ret <= 0)
@@ -2499,6 +2507,12 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 			return -EINVAL;
 	}
 
+	/* If device is not setup, there is no point in resetting it */
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+						SLOT_STATE_DISABLED)
+		return 0;
+
 	xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
 	/* Allocate the command structure that holds the struct completion.
 	 * Assume we're in process context, since the normal device reset

drivers/usb/host/xhci.h

@@ -560,6 +560,11 @@ struct xhci_slot_ctx {
 #define SLOT_STATE	(0x1f << 27)
 #define GET_SLOT_STATE(p)	(((p) & (0x1f << 27)) >> 27)
 
+#define SLOT_STATE_DISABLED	0
+#define SLOT_STATE_ENABLED	SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT	1
+#define SLOT_STATE_ADDRESSED	2
+#define SLOT_STATE_CONFIGURED	3
 
 /**
  * struct xhci_ep_ctx
@@ -1302,6 +1307,7 @@ struct xhci_hcd {
  * commands.
  */
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
+#define XHCI_BROKEN_MSI		(1 << 6)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

drivers/usb/musb/musb_core.c

@@ -96,6 +96,7 @@
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/kobject.h>
+#include <linux/prefetch.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 

drivers/usb/renesas_usbhs/mod_gadget.c

@@ -1380,5 +1380,6 @@ void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv)
 {
 	struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
 
+	kfree(gpriv->uep);
 	kfree(gpriv);
 }

drivers/usb/serial/ftdi_sio.c

@@ -647,6 +647,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
 	{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -351,6 +351,7 @@
  */
 #define FTDI_4N_GALAXY_DE_1_PID	0xF3C0
 #define FTDI_4N_GALAXY_DE_2_PID	0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID	0xF3C2
 
 /*
  * Linx Technologies product ids

drivers/usb/serial/option.c

@@ -311,10 +311,6 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_AC2726			0xfff5
 #define ZTE_PRODUCT_AC8710T			0xffff
 
-/* ZTE PRODUCTS -- alternate vendor ID */
-#define ZTE_VENDOR_ID2				0x1d6b
-#define ZTE_PRODUCT_MF_330			0x0002
-
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
 
@@ -340,11 +336,12 @@ static void option_instat_callback(struct urb *urb);
 #define TOSHIBA_PRODUCT_G450			0x0d45
 
 #define ALINK_VENDOR_ID				0x1e0e
+#define ALINK_PRODUCT_PH300			0x9100
 #define ALINK_PRODUCT_3GU			0x9200
 
 /* ALCATEL PRODUCTS */
 #define ALCATEL_VENDOR_ID			0x1bbb
-#define ALCATEL_PRODUCT_X060S			0x0000
+#define ALCATEL_PRODUCT_X060S_X200		0x0000
 
 #define PIRELLI_VENDOR_ID			0x1266
 #define PIRELLI_PRODUCT_C100_1			0x1002
@@ -379,6 +376,9 @@ static void option_instat_callback(struct urb *urb);
  * It seems to contain a Qualcomm QSC6240/6290 chipset            */
 #define FOUR_G_SYSTEMS_PRODUCT_W14		0x9603
 
+/* Zoom */
+#define ZOOM_PRODUCT_4597			0x9607
+
 /* Haier products */
 #define HAIER_VENDOR_ID				0x201e
 #define HAIER_PRODUCT_CE100			0x2009
@@ -432,6 +432,20 @@ static const struct option_blacklist_info four_g_w14_blacklist = {
 	.reason = OPTION_BLACKLIST_SENDSETUP
 };
 
+static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info alcatel_x200_blacklist = {
+	.infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup),
+	.ifaceinfo = alcatel_x200_no_sendsetup,
+	.reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 };
+static const struct option_blacklist_info zte_k3765_z_blacklist = {
+	.infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup),
+	.ifaceinfo = zte_k3765_z_no_sendsetup,
+	.reason = OPTION_BLACKLIST_SENDSETUP
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -916,13 +930,13 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+	  0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -935,13 +949,17 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
 	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+	{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
+	  .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
+	},
 	{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
 	{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
 	{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
   	  .driver_info = (kernel_ulong_t)&four_g_w14_blacklist
   	},
+	{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
 	{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
 	/* Pirelli  */
 	{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},

drivers/usb/storage/transport.c

@@ -819,6 +819,35 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		}
 	}
 
+	/*
+	 * Some devices don't work or return incorrect data the first
+	 * time they get a READ(10) command, or for the first READ(10)
+	 * after a media change.  If the INITIAL_READ10 flag is set,
+	 * keep track of whether READ(10) commands succeed.  If the
+	 * previous one succeeded and this one failed, set the REDO_READ10
+	 * flag to force a retry.
+	 */
+	if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+			srb->cmnd[0] == READ_10)) {
+		if (srb->result == SAM_STAT_GOOD) {
+			set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+		} else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+			clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+			set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+		}
+
+		/*
+		 * Next, if the REDO_READ10 flag is set, return a result
+		 * code that will cause the SCSI core to retry the READ(10)
+		 * command immediately.
+		 */
+		if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+			clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+			srb->result = DID_IMM_RETRY << 16;
+			srb->sense_buffer[0] = 0;
+		}
+	}
+
 	/* Did we transfer less than the minimum amount required? */
 	if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
 			scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)

drivers/usb/storage/unusual_devs.h

@@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV(  0x090c, 0x6000, 0x0100, 0x0100,
+		"Feiya",
+		"SD/SDHC Card Reader",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
 /* This Pentax still camera is not conformant
  * to the USB storage specification: -
  * - It does not like the INQUIRY command. So we must handle this command
@@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_READ_DISC_INFO ),
 
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV(  0x1b1c, 0x1ab5, 0x0200, 0x0200,
+		"Corsair",
+		"Padlock v2",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_INITIAL_READ10 ),
+
 /* Patch by Richard Schtz <r.schtz@t-online.de>
  * This external hard drive enclosure uses a JMicron chip which
  * needs the US_FL_IGNORE_RESIDUE flag to work properly. */

drivers/usb/storage/usb.c

@@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us)
 			US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
 			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
-			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16);
+			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+			US_FL_INITIAL_READ10);
 
 	p = quirks;
 	while (*p) {
@@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us)
 		case 'm':
 			f |= US_FL_MAX_SECTORS_64;
 			break;
+		case 'n':
+			f |= US_FL_INITIAL_READ10;
+			break;
 		case 'o':
 			f |= US_FL_CAPACITY_OK;
 			break;
@@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us)
 	if (result)
 		goto BadDevice;
 
+	/*
+	 * If the device returns invalid data for the first READ(10)
+	 * command, indicate the command should be retried.
+	 */
+	if (us->fflags & US_FL_INITIAL_READ10)
+		set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
 	/* Acquire all the other resources and add the host */
 	result = usb_stor_acquire_resources(us);
 	if (result)

drivers/usb/storage/usb.h

@@ -73,6 +73,8 @@ struct us_unusual_dev {
 #define US_FLIDX_RESETTING	4	/* device reset in progress */
 #define US_FLIDX_TIMED_OUT	5	/* SCSI midlayer timed out  */
 #define US_FLIDX_DONT_SCAN	6	/* don't scan (disconnect)  */
+#define US_FLIDX_REDO_READ10	7	/* redo READ(10) command    */
+#define US_FLIDX_READ10_WORKED	8	/* previous READ(10) succeeded */
 
 #define USB_STOR_STRING_LEN 32
 

include/linux/usb_usual.h

@@ -62,7 +62,9 @@
 	US_FLAG(NO_READ_DISC_INFO,	0x00040000)		\
 		/* cannot handle READ_DISC_INFO */		\
 	US_FLAG(NO_READ_CAPACITY_16,	0x00080000)		\
-		/* cannot handle READ_CAPACITY_16 */
+		/* cannot handle READ_CAPACITY_16 */		\
+	US_FLAG(INITIAL_READ10,	0x00100000)			\
+		/* Initial READ(10) (and others) must be retried */
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };