Commit 4e8052af authored by Hans de Goede's avatar Hans de Goede

drm/i915/intel_dsi_vbt: Add support for PMIC MIPI sequences

Add support for PMIC MIPI sequences using the new
intel_soc_pmic_exec_mipi_pmic_seq_element function.

This fixes the DSI LCD panel not lighting up when not initialized by the
GOP (because an external monitor was connected) on GPD win and GPD pocket
devices.

Specifically the LCD panel seems to need GPIO pin 9 on the PMIC to be
driven high, which is done through a PMIC MIPI sequence. Before this commit
if the sequence was not executed by the GOP the pin would stay low causing
the LCD panel to not work. Having the MIPI sequences properly control this
GPIO should also help save some power when the panel is off.

Changes in v2, v3:
-Only changes to other patches in this patch-set

Changes in v4:
-Move decoding of the raw 15 bytes PMIC MIPI sequence element into
 i2c-address, register-address, value and mask into the mipi_exec_pmic()
 function instead of passing the raw data to
 intel_soc_pmic_exec_mipi_pmic_seq_element()
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190107111556.4510-5-hdegoede@redhat.com
parent 429188f0
......@@ -28,9 +28,11 @@
#include <drm/drm_edid.h>
#include <drm/i915_drm.h>
#include <linux/gpio/consumer.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/slab.h>
#include <video/mipi_display.h>
#include <asm/intel-mid.h>
#include <asm/unaligned.h>
#include "i915_drv.h"
#include "intel_drv.h"
#include "intel_dsi.h"
......@@ -391,7 +393,25 @@ static const u8 *mipi_exec_spi(struct intel_dsi *intel_dsi, const u8 *data)
static const u8 *mipi_exec_pmic(struct intel_dsi *intel_dsi, const u8 *data)
{
DRM_DEBUG_KMS("Skipping PMIC element execution\n");
#ifdef CONFIG_PMIC_OPREGION
u32 value, mask, reg_address;
u16 i2c_address;
int ret;
/* byte 0 aka PMIC Flag is reserved */
i2c_address = get_unaligned_le16(data + 1);
reg_address = get_unaligned_le32(data + 3);
value = get_unaligned_le32(data + 7);
mask = get_unaligned_le32(data + 11);
ret = intel_soc_pmic_exec_mipi_pmic_seq_element(i2c_address,
reg_address,
value, mask);
if (ret)
DRM_ERROR("%s failed, error: %d\n", __func__, ret);
#else
DRM_ERROR("Your hardware requires CONFIG_PMIC_OPREGION and it is not set\n");
#endif
return data + 15;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment