Commit 53760710 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (22 commits)
  [ARM] fix section-based ioremap
  [NET] am79c961a: fix spin_lock usage
  [ARM] omap: usb: thou shalt not provide empty release functions
  [ARM] omap: watchdog: allow OMAP watchdog driver on OMAP34xx platforms
  [ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3
  [ARM] clkdev: fix clock matching
  [ARM] 5370/1: at91: fix rm9200 watchdog
  [ARM] 5368/1: arch/arm/mach-davinci/usb.c buildfix
  [ARM] 5365/1: s3cmci: Use new include path of dma.h
  [ARM] fix StrongARM-11x0 page copy implementation
  [ARM] omap: ensure OMAP drivers pass a struct device to clk_get()
  ARM: OMAP: Fix compile for h3 MMC
  ARM: OMAP: Remove unused platform devices, v3
  ARM: OMAP: Fix ASoC by enabling writes to XCCR and RCCR McBSP registers, v3
  ARM: OMAP: Fix OSK ASoC by registering I2C board info for tlvaic23
  ARM: OMAP: remove duplicated #include's
  ARM: OMAP: Fix DMA CCR programming for request line > 63, v3
  ARM: OMAP: Fix gpio.c compile on 15xx with CONFIG_DEBUGFS
  ARM: OMAP: Fix compile for beagle
  ARM: OMAP: Fix gpio by switching to generic gpio calls, v2
  ...
parents cfb901bf 24f11ec0
...@@ -24,6 +24,15 @@ ...@@ -24,6 +24,15 @@
static LIST_HEAD(clocks); static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex); static DEFINE_MUTEX(clocks_mutex);
/*
* Find the correct struct clk for the device and connection ID.
* We do slightly fuzzy matching here:
* An entry with a NULL ID is assumed to be a wildcard.
* If an entry has a device ID, it must match
* If an entry has a connection ID, it must match
* Then we take the most specific entry - with the following
* order of precidence: dev+con > dev only > con only.
*/
static struct clk *clk_find(const char *dev_id, const char *con_id) static struct clk *clk_find(const char *dev_id, const char *con_id)
{ {
struct clk_lookup *p; struct clk_lookup *p;
...@@ -31,13 +40,17 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) ...@@ -31,13 +40,17 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
int match, best = 0; int match, best = 0;
list_for_each_entry(p, &clocks, node) { list_for_each_entry(p, &clocks, node) {
if ((p->dev_id && !dev_id) || (p->con_id && !con_id))
continue;
match = 0; match = 0;
if (p->dev_id) if (p->dev_id) {
match += 2 * (strcmp(p->dev_id, dev_id) == 0); if (!dev_id || strcmp(p->dev_id, dev_id))
if (p->con_id) continue;
match += 1 * (strcmp(p->con_id, con_id) == 0); match += 2;
}
if (p->con_id) {
if (!con_id || strcmp(p->con_id, con_id))
continue;
match += 1;
}
if (match == 0) if (match == 0)
continue; continue;
......
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#include <mach/common.h> #include <mach/common.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <mach/irqs.h>
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = { static struct musb_hdrc_eps_bits musb_eps[] = {
......
...@@ -37,16 +37,14 @@ ...@@ -37,16 +37,14 @@
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <mach/gpio-switch.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/dma.h>
#include <mach/tc.h> #include <mach/tc.h>
#include <mach/nand.h> #include <mach/nand.h>
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/usb.h> #include <mach/usb.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
static int h2_keymap[] = { static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT), KEY(0, 0, KEY_LEFT),
...@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = { ...@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = {
.id = -1, .id = -1,
}; };
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(15),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
/*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H2 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* tsc2101_configure, */
.codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2101_clock_setup, */
.codec_clock_on = NULL, /* tsc2101_clock_on, */
.codec_clock_off = NULL, /* tsc2101_clock_off, */
.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h2_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *h2_devices[] __initdata = { static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device, &h2_nor_device,
&h2_nand_device, &h2_nand_device,
...@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = { ...@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_irda_device, &h2_irda_device,
&h2_kp_device, &h2_kp_device,
&h2_lcd_device, &h2_lcd_device,
&h2_mcbsp1_device,
}; };
static void __init h2_init_smc91x(void) static void __init h2_init_smc91x(void)
...@@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { ...@@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
#define H2_NAND_RB_GPIO_PIN 62 #define H2_NAND_RB_GPIO_PIN 62
static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
{
return gpio_get_value(H2_NAND_RB_GPIO_PIN);
}
static void __init h2_init(void) static void __init h2_init(void)
{ {
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
......
...@@ -49,8 +49,6 @@ ...@@ -49,8 +49,6 @@
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/dma.h> #include <mach/dma.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
#define H3_TS_GPIO 48 #define H3_TS_GPIO 48
...@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { ...@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
}, },
}; };
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(15),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
/*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H3 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* tsc2101_configure, */
.codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2101_clock_setup, */
.codec_clock_on = NULL, /* tsc2101_clock_on, */
.codec_clock_off = NULL, /* tsc2101_clock_off, */
.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h3_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&nor_device, &nor_device,
&nand_device, &nand_device,
...@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = { ...@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = {
&h3_irda_device, &h3_irda_device,
&h3_kp_device, &h3_kp_device,
&h3_lcd_device, &h3_lcd_device,
&h3_mcbsp1_device,
}; };
static struct omap_usb_config h3_usb_config __initdata = { static struct omap_usb_config h3_usb_config __initdata = {
...@@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { ...@@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
}, },
}; };
static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
{
.name = "mmc_slot",
.gpio = OMAP_MPUIO(1),
.type = OMAP_GPIO_SWITCH_TYPE_COVER,
.debounce_rising = 100,
.debounce_falling = 0,
.notify = h3_mmc_slot_cover_handler,
.notify_data = NULL,
},
};
#define H3_NAND_RB_GPIO_PIN 10 #define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct omap_nand_platform_data *data) static int nand_dev_ready(struct omap_nand_platform_data *data)
......
...@@ -37,8 +37,6 @@ ...@@ -37,8 +37,6 @@
#include <mach/usb.h> #include <mach/usb.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
#include <mach/mmc.h> #include <mach/mmc.h>
static int innovator_keymap[] = { static int innovator_keymap[] = {
...@@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = { ...@@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = {
.resource = &innovator_flash_resource, .resource = &innovator_flash_resource,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "OMAP Innovator AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device innovator_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource innovator_kp_resources[] = { static struct resource innovator_kp_resources[] = {
[0] = { [0] = {
.start = INT_KEYBOARD, .start = INT_KEYBOARD,
...@@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = { ...@@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = {
static struct platform_device *innovator1510_devices[] __initdata = { static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device, &innovator_flash_device,
&innovator1510_smc91x_device, &innovator1510_smc91x_device,
&innovator_mcbsp1_device,
&innovator_kp_device, &innovator_kp_device,
&innovator1510_lcd_device, &innovator1510_lcd_device,
&innovator1510_spi_device, &innovator1510_spi_device,
......
...@@ -32,7 +32,6 @@ ...@@ -32,7 +32,6 @@
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/dsp_common.h> #include <mach/dsp_common.h>
#include <mach/aic23.h>
#include <mach/omapfb.h> #include <mach/omapfb.h>
#include <mach/lcd_mipid.h> #include <mach/lcd_mipid.h>
#include <mach/mmc.h> #include <mach/mmc.h>
...@@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock); ...@@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock);
*/ */
static int audio_pwr_state = -1; static int audio_pwr_state = -1;
static inline void aic23_power_up(void)
{
}
static inline void aic23_power_down(void)
{
}
/* /*
* audio_pwr_up / down should be called under audio_pwr_lock * audio_pwr_up / down should be called under audio_pwr_lock
*/ */
......
...@@ -51,8 +51,6 @@ ...@@ -51,8 +51,6 @@
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/tc.h> #include <mach/tc.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
static struct mtd_partition osk_partitions[] = { static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */ /* bootloader (U-Boot, etc) in first sector */
...@@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = { ...@@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = {
.resource = osk5912_cf_resources, .resource = osk5912_cf_resources,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "OSK AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device osk5912_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *osk5912_devices[] __initdata = { static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device, &osk5912_flash_device,
&osk5912_smc91x_device, &osk5912_smc91x_device,
&osk5912_cf_device, &osk5912_cf_device,
&osk5912_mcbsp1_device,
}; };
static struct gpio_led tps_leds[] = { static struct gpio_led tps_leds[] = {
...@@ -259,8 +220,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { ...@@ -259,8 +220,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
.platform_data = &tps_board, .platform_data = &tps_board,
}, },
{
I2C_BOARD_INFO("tlv320aic23", 0x1B),
},
/* TODO when driver support is ready: /* TODO when driver support is ready:
* - aic23 audio chip at 0x1a
* - optionally on Mistral, ov9640 camera sensor at 0x30 * - optionally on Mistral, ov9640 camera sensor at 0x30
*/ */
}; };
......
...@@ -42,8 +42,6 @@ ...@@ -42,8 +42,6 @@
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
static void __init omap_palmte_init_irq(void) static void __init omap_palmte_init_irq(void)
{ {
...@@ -195,15 +193,6 @@ static struct omap_usb_config palmte_usb_config __initdata = { ...@@ -195,15 +193,6 @@ static struct omap_usb_config palmte_usb_config __initdata = {
.pins[0] = 2, .pins[0] = 2,
}; };
static struct omap_mmc_config palmte_mmc_config __initdata = {
.mmc[0] = {
.enabled = 1,
.wp_pin = PALMTE_MMC_WP_GPIO,
.power_pin = PALMTE_MMC_POWER_GPIO,
.switch_pin = PALMTE_MMC_SWITCH_GPIO,
},
};
static struct omap_lcd_config palmte_lcd_config __initdata = { static struct omap_lcd_config palmte_lcd_config __initdata = {
.ctrl_name = "internal", .ctrl_name = "internal",
}; };
...@@ -212,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = { ...@@ -212,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
}; };
static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
.spcr2 = FRST | GRST | XRST | XINTM(3),
.xcr2 = XDATDLY(1) | XFIG,
.xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
.pcr0 = SCLKME | FSXP | CLKXP,
};
static struct omap_alsa_codec_config palmte_alsa_config = {
.name = "TSC2102 audio",
.mcbsp_regs_alsa = &palmte_mcbsp1_regs,
.codec_configure_dev = NULL, /* tsc2102_configure, */
.codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2102_clock_setup, */
.codec_clock_on = NULL, /* tsc2102_clock_on, */
.codec_clock_off = NULL, /* tsc2102_clock_off, */
.get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
};
#ifdef CONFIG_APM #ifdef CONFIG_APM
/* /*
* Values measured in 10 minute intervals averaged over 10 samples. * Values measured in 10 minute intervals averaged over 10 samples.
......
...@@ -30,7 +30,6 @@ ...@@ -30,7 +30,6 @@
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#include <mach/led.h> #include <mach/led.h>
#include <mach/mcbsp.h>
#include <mach/gpio.h> #include <mach/gpio.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/usb.h> #include <mach/usb.h>
...@@ -40,7 +39,6 @@ ...@@ -40,7 +39,6 @@
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/omap-alsa.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/ads7846.h> #include <linux/spi/ads7846.h>
...@@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = { ...@@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = {
.resource = &palmtt_flash_resource, .resource = &palmtt_flash_resource,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM |
FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmTT AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device palmtt_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource palmtt_kp_resources[] = { static struct resource palmtt_kp_resources[] = {
[0] = { [0] = {
.start = INT_KEYBOARD, .start = INT_KEYBOARD,
...@@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = { ...@@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = {
static struct platform_device *palmtt_devices[] __initdata = { static struct platform_device *palmtt_devices[] __initdata = {
&palmtt_flash_device, &palmtt_flash_device,
&palmtt_mcbsp1_device,
&palmtt_kp_device, &palmtt_kp_device,
&palmtt_lcd_device, &palmtt_lcd_device,
&palmtt_irda_device, &palmtt_irda_device,
......
...@@ -32,7 +32,6 @@ ...@@ -32,7 +32,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#include <mach/mcbsp.h>
#include <mach/gpio.h> #include <mach/gpio.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/usb.h> #include <mach/usb.h>
...@@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = { ...@@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = {
.id = -1, .id = -1,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmZ71 AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure */
.codec_set_samplerate = NULL, /* aic23_set_samplerate */
.codec_clock_setup = NULL, /* aic23_clock_setup */
.codec_clock_on = NULL, /* aic23_clock_on */
.codec_clock_off = NULL, /* aic23_clock_off */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate */
};
static struct platform_device palmz71_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct omap_backlight_config palmz71_backlight_config = { static struct omap_backlight_config palmz71_backlight_config = {
.default_intensity = 0xa0, .default_intensity = 0xa0,
}; };
...@@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = { ...@@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = {
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&palmz71_rom_device, &palmz71_rom_device,
&palmz71_kp_device, &palmz71_kp_device,
&palmz71_mcbsp1_device,
&palmz71_lcd_device, &palmz71_lcd_device,
&palmz71_irda_device, &palmz71_irda_device,
&palmz71_spi_device, &palmz71_spi_device,
......
...@@ -34,13 +34,12 @@ ...@@ -34,13 +34,12 @@
#include <mach/gpio.h> #include <mach/gpio.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/dma.h>
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/usb.h> #include <mach/usb.h>
#include <mach/tc.h> #include <mach/tc.h>
#include <mach/board.h> #include <mach/board.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
#include <mach/keypad.h> #include <mach/keypad.h>
/* Write to I2C device */ /* Write to I2C device */
...@@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = { ...@@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = {
.resource = sx1_irda_resources, .resource = sx1_irda_resources,
}; };
/*----------- McBSP & Sound -------------------------*/
/* Playback interface - McBSP1 */
static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
.spcr2 = XINTM(3), /* SPCR2=30 */
.spcr1 = RINTM(3), /* SPCR1=30 */
.rcr2 = 0, /* RCR2 =00 */
.rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */
.xcr2 = 0, /* XCR2 = 0 */
.xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
.srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
.srgr2 = FSGM | FPER(31), /* SRGR2=101f */
.pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
/* PCR0 =0f0f */
};
static struct omap_alsa_codec_config sx1_alsa_config = {
.name = "SX1 EGold",
.mcbsp_regs_alsa = &mcbsp1_regs,
};
static struct platform_device sx1_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &sx1_alsa_config,
},
};
/*----------- MTD -------------------------*/ /*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = { static struct mtd_partition sx1_partitions[] = {
...@@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = { ...@@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = {
&sx1_flash_device, &sx1_flash_device,
&sx1_kp_device, &sx1_kp_device,
&sx1_lcd_device, &sx1_lcd_device,
&sx1_mcbsp1_device,
&sx1_irda_device, &sx1_irda_device,
}; };
/*-----------------------------------------*/ /*-----------------------------------------*/
...@@ -423,9 +392,9 @@ static void __init omap_sx1_init(void) ...@@ -423,9 +392,9 @@ static void __init omap_sx1_init(void)
/* turn on USB power */ /* turn on USB power */
/* sx1_setusbpower(1); cant do it here because i2c is not ready */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */
omap_request_gpio(1); /* A_IRDA_OFF */ gpio_request(1, "A_IRDA_OFF");
omap_request_gpio(11); /* A_SWITCH */ gpio_request(11, "A_SWITCH");
omap_request_gpio(15); /* A_USB_ON */ gpio_request(15, "A_USB_ON");
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */
......
...@@ -22,7 +22,6 @@ ...@@ -22,7 +22,6 @@
#include <linux/reboot.h> #include <linux/reboot.h>
#include <linux/serial_8250.h> #include <linux/serial_8250.h>
#include <linux/serial_reg.h> #include <linux/serial_reg.h>
#include <linux/irq.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/dma.h> #include <mach/dma.h>
#include <mach/irqs.h> #include <mach/irqs.h>
#include <mach/mux.h> #include <mach/mux.h>
......
...@@ -22,8 +22,6 @@ ...@@ -22,8 +22,6 @@
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/mtd/onenand.h> #include <linux/mtd/onenand.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/leds.h> #include <linux/leds.h>
#include <linux/err.h> #include <linux/err.h>
...@@ -282,65 +280,16 @@ static void __init apollon_led_init(void) ...@@ -282,65 +280,16 @@ static void __init apollon_led_init(void)
{ {
/* LED0 - AA10 */ /* LED0 - AA10 */
omap_cfg_reg(AA10_242X_GPIO13); omap_cfg_reg(AA10_242X_GPIO13);
omap_request_gpio(LED0_GPIO13); gpio_request(LED0_GPIO13, "LED0");
omap_set_gpio_direction(LED0_GPIO13, 0); gpio_direction_output(LED0_GPIO13, 0);
omap_set_gpio_dataout(LED0_GPIO13, 0);
/* LED1 - AA6 */ /* LED1 - AA6 */
omap_cfg_reg(AA6_242X_GPIO14); omap_cfg_reg(AA6_242X_GPIO14);
omap_request_gpio(LED1_GPIO14); gpio_request(LED1_GPIO14, "LED1");
omap_set_gpio_direction(LED1_GPIO14, 0); gpio_direction_output(LED1_GPIO14, 0);
omap_set_gpio_dataout(LED1_GPIO14, 0);
/* LED2 - AA4 */ /* LED2 - AA4 */
omap_cfg_reg(AA4_242X_GPIO15); omap_cfg_reg(AA4_242X_GPIO15);
omap_request_gpio(LED2_GPIO15); gpio_request(LED2_GPIO15, "LED2");
omap_set_gpio_direction(LED2_GPIO15, 0); gpio_direction_output(LED2_GPIO15, 0);
omap_set_gpio_dataout(LED2_GPIO15, 0);
}
static irqreturn_t apollon_sw_interrupt(int irq, void *ignored)
{
static unsigned int led0, led1, led2;
if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16))
omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1);
else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17))
omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1);
else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58))
omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1);
return IRQ_HANDLED;
}
static void __init apollon_sw_init(void)
{
/* Enter SW - Y11 */
omap_cfg_reg(Y11_242X_GPIO16);
omap_request_gpio(SW_ENTER_GPIO16);
gpio_direction_input(SW_ENTER_GPIO16);
/* Up SW - AA12 */
omap_cfg_reg(AA12_242X_GPIO17);
omap_request_gpio(SW_UP_GPIO17);
gpio_direction_input(SW_UP_GPIO17);
/* Down SW - AA8 */
omap_cfg_reg(AA8_242X_GPIO58);
omap_request_gpio(SW_DOWN_GPIO58);
gpio_direction_input(SW_DOWN_GPIO58);
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
IRQF_SHARED, "enter sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
IRQF_SHARED, "up sw",
&apollon_sw_interrupt))
return;
set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
IRQF_SHARED, "down sw",
&apollon_sw_interrupt))
return;
} }
static void __init apollon_usb_init(void) static void __init apollon_usb_init(void)
...@@ -357,7 +306,6 @@ static void __init omap_apollon_init(void) ...@@ -357,7 +306,6 @@ static void __init omap_apollon_init(void)
u32 v; u32 v;
apollon_led_init(); apollon_led_init();
apollon_sw_init();
apollon_flash_init(); apollon_flash_init();
apollon_usb_init(); apollon_usb_init();
......
...@@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void) ...@@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void)
ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
if (omap_request_gpio(eth_gpio) < 0) { if (gpio_request(eth_gpio, "smc911x irq") < 0) {
printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
eth_gpio); eth_gpio);
return; return;
......
...@@ -28,6 +28,8 @@ ...@@ -28,6 +28,8 @@
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h> #include <linux/mtd/nand.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h> #include <mach/hardware.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
...@@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev, ...@@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio) unsigned gpio, unsigned ngpio)
{ {
/* gpio + 0 is "mmc0_cd" (input/IRQ) */ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
omap_cfg_reg(AH8_34XX_GPIO29);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
/* REVISIT: need ehci-omap hooks for external VBUS /* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect * power switch and overcurrent detect
...@@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void) ...@@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void)
omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
omap_serial_init(); omap_serial_init();
omap_cfg_reg(AH8_34XX_GPIO29);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
omap_cfg_reg(J25_34XX_GPIO170); omap_cfg_reg(J25_34XX_GPIO170);
gpio_request(170, "DVI_nPD"); gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */ /* REVISIT leave DVI powered down until it's needed ... */
......
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <linux/io.h> #include <linux/io.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <mach/irqs.h>
#include <mach/dma.h> #include <mach/dma.h>
#include <mach/irqs.h> #include <mach/irqs.h>
#include <mach/mux.h> #include <mach/mux.h>
......
...@@ -68,7 +68,7 @@ mc_copy_user_page(void *from, void *to) ...@@ -68,7 +68,7 @@ mc_copy_user_page(void *from, void *to)
: "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); : "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
} }
void v4_mc_copy_user_highpage(struct page *from, struct page *to, void v4_mc_copy_user_highpage(struct page *to, struct page *from,
unsigned long vaddr) unsigned long vaddr)
{ {
void *kto = kmap_atomic(to, KM_USER1); void *kto = kmap_atomic(to, KM_USER1);
......
...@@ -138,7 +138,7 @@ void __check_kvm_seq(struct mm_struct *mm) ...@@ -138,7 +138,7 @@ void __check_kvm_seq(struct mm_struct *mm)
*/ */
static void unmap_area_sections(unsigned long virt, unsigned long size) static void unmap_area_sections(unsigned long virt, unsigned long size)
{ {
unsigned long addr = virt, end = virt + (size & ~SZ_1M); unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1));
pgd_t *pgd; pgd_t *pgd;
flush_cache_vunmap(addr, end); flush_cache_vunmap(addr, end);
...@@ -337,10 +337,7 @@ void __iounmap(volatile void __iomem *io_addr) ...@@ -337,10 +337,7 @@ void __iounmap(volatile void __iomem *io_addr)
void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
#ifndef CONFIG_SMP #ifndef CONFIG_SMP
struct vm_struct **p, *tmp; struct vm_struct **p, *tmp;
#endif
unsigned int section_mapping = 0;
#ifndef CONFIG_SMP
/* /*
* If this is a section based mapping we need to handle it * If this is a section based mapping we need to handle it
* specially as the VM subsystem does not know how to handle * specially as the VM subsystem does not know how to handle
...@@ -352,11 +349,8 @@ void __iounmap(volatile void __iomem *io_addr) ...@@ -352,11 +349,8 @@ void __iounmap(volatile void __iomem *io_addr)
for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) { for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) { if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
if (tmp->flags & VM_ARM_SECTION_MAPPING) { if (tmp->flags & VM_ARM_SECTION_MAPPING) {
*p = tmp->next;
unmap_area_sections((unsigned long)tmp->addr, unmap_area_sections((unsigned long)tmp->addr,
tmp->size); tmp->size);
kfree(tmp);
section_mapping = 1;
} }
break; break;
} }
...@@ -364,7 +358,6 @@ void __iounmap(volatile void __iomem *io_addr) ...@@ -364,7 +358,6 @@ void __iounmap(volatile void __iomem *io_addr)
write_unlock(&vmlist_lock); write_unlock(&vmlist_lock);
#endif #endif
if (!section_mapping) vunmap(addr);
vunmap(addr);
} }
EXPORT_SYMBOL(__iounmap); EXPORT_SYMBOL(__iounmap);
...@@ -278,14 +278,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, ...@@ -278,14 +278,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
u32 val; u32 val;
val = dma_read(CCR(lch)); val = dma_read(CCR(lch));
val &= ~(3 << 19);
if (dma_trigger > 63) /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
val |= 1 << 20; val &= ~((3 << 19) | 0x1f);
if (dma_trigger > 31) val |= (dma_trigger & ~0x1f) << 14;
val |= 1 << 19; val |= dma_trigger & 0x1f;
val &= ~(0x1f);
val |= (dma_trigger & 0x1f);
if (sync_mode & OMAP_DMA_SYNC_FRAME) if (sync_mode & OMAP_DMA_SYNC_FRAME)
val |= 1 << 5; val |= 1 << 5;
......
...@@ -1789,6 +1789,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) ...@@ -1789,6 +1789,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
/* FIXME for at least omap2, show pullup/pulldown state */ /* FIXME for at least omap2, show pullup/pulldown state */
irqstat = irq_desc[irq].status; irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
defined(CONFIG_ARCH_OMAP34XX)
if (is_in && ((bank->suspend_wakeup & mask) if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) { || irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL; char *trigger = NULL;
...@@ -1818,6 +1820,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) ...@@ -1818,6 +1820,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
(bank->suspend_wakeup & mask) (bank->suspend_wakeup & mask)
? " wakeup" : ""); ? " wakeup" : "");
} }
#endif
seq_printf(s, "\n"); seq_printf(s, "\n");
} }
......
/*
* arch/arm/plat-omap/include/mach/aic23.h
*
* Hardware definitions for TI TLV320AIC23 audio codec
*
* Copyright (C) 2002 RidgeRun, Inc.
* Author: Steve Johnson
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_AIC23_H
#define __ASM_ARCH_AIC23_H
// Codec TLV320AIC23
#define LEFT_LINE_VOLUME_ADDR 0x00
#define RIGHT_LINE_VOLUME_ADDR 0x01
#define LEFT_CHANNEL_VOLUME_ADDR 0x02
#define RIGHT_CHANNEL_VOLUME_ADDR 0x03
#define ANALOG_AUDIO_CONTROL_ADDR 0x04
#define DIGITAL_AUDIO_CONTROL_ADDR 0x05
#define POWER_DOWN_CONTROL_ADDR 0x06
#define DIGITAL_AUDIO_FORMAT_ADDR 0x07
#define SAMPLE_RATE_CONTROL_ADDR 0x08
#define DIGITAL_INTERFACE_ACT_ADDR 0x09
#define RESET_CONTROL_ADDR 0x0F
// Left (right) line input volume control register
#define LRS_ENABLED 0x0100
#define LIM_MUTED 0x0080
#define LIV_DEFAULT 0x0017
#define LIV_MAX 0x001f
#define LIV_MIN 0x0000
// Left (right) channel headphone volume control register
#define LZC_ON 0x0080
#define LHV_DEFAULT 0x0079
#define LHV_MAX 0x007f
#define LHV_MIN 0x0000
// Analog audio path control register
#define STA_REG(x) ((x)<<6)
#define STE_ENABLED 0x0020
#define DAC_SELECTED 0x0010
#define BYPASS_ON 0x0008
#define INSEL_MIC 0x0004
#define MICM_MUTED 0x0002
#define MICB_20DB 0x0001
// Digital audio path control register
#define DACM_MUTE 0x0008
#define DEEMP_32K 0x0002
#define DEEMP_44K 0x0004
#define DEEMP_48K 0x0006
#define ADCHP_ON 0x0001
// Power control down register
#define DEVICE_POWER_OFF 0x0080
#define CLK_OFF 0x0040
#define OSC_OFF 0x0020
#define OUT_OFF 0x0010
#define DAC_OFF 0x0008
#define ADC_OFF 0x0004
#define MIC_OFF 0x0002
#define LINE_OFF 0x0001
// Digital audio interface register
#define MS_MASTER 0x0040
#define LRSWAP_ON 0x0020
#define LRP_ON 0x0010
#define IWL_16 0x0000
#define IWL_20 0x0004
#define IWL_24 0x0008
#define IWL_32 0x000C
#define FOR_I2S 0x0002
#define FOR_DSP 0x0003
// Sample rate control register
#define CLKOUT_HALF 0x0080
#define CLKIN_HALF 0x0040
#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode
#define USB_CLK_ON 0x0001
#define SR_MASK 0xf
#define CLKOUT_SHIFT 7
#define CLKIN_SHIFT 6
#define SR_SHIFT 2
#define BOSR_SHIFT 1
// Digital interface register
#define ACT_ON 0x0001
#define TLV320AIC23ID1 (0x1a) // cs low
#define TLV320AIC23ID2 (0x1b) // cs high
void aic23_power_up(void);
void aic23_power_down(void);
#endif /* __ASM_ARCH_AIC23_H */
...@@ -30,7 +30,9 @@ ...@@ -30,7 +30,9 @@
/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
#define OMAP1710_ETHR_START 0x04000300 #define OMAP1710_ETHR_START 0x04000300
#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4)
extern void h3_mmc_init(void); extern void h3_mmc_init(void);
extern void h3_mmc_slot_cover_handler(void *arg, int state);
#endif /* __ASM_ARCH_OMAP_H3_H */ #endif /* __ASM_ARCH_OMAP_H3_H */
...@@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); ...@@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable);
#include <linux/errno.h> #include <linux/errno.h>
#include <asm-generic/gpio.h> #include <asm-generic/gpio.h>
static inline int omap_request_gpio(int gpio)
{
return gpio_request(gpio, "FIXME");
}
static inline void omap_free_gpio(int gpio)
{
gpio_free(gpio);
}
static inline int gpio_get_value(unsigned gpio) static inline int gpio_get_value(unsigned gpio)
{ {
return __gpio_get_value(gpio); return __gpio_get_value(gpio);
......
...@@ -87,6 +87,10 @@ ...@@ -87,6 +87,10 @@
#define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERG 0x3A
#define OMAP_MCBSP_REG_XCERH 0x3C #define OMAP_MCBSP_REG_XCERH 0x3C
/* Dummy defines, these are not available on omap1 */
#define OMAP_MCBSP_REG_XCCR 0x00
#define OMAP_MCBSP_REG_RCCR 0x00
#define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
...@@ -231,11 +235,16 @@ ...@@ -231,11 +235,16 @@
#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */
/*********************** McBSP XCCR bit definitions *************************/ /*********************** McBSP XCCR bit definitions *************************/
#define EXTCLKGATE 0x8000
#define PPCONNECT 0x4000
#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */
#define XFULL_CYCLE 0x0800
#define DILB 0x0020 #define DILB 0x0020
#define XDMAEN 0x0008 #define XDMAEN 0x0008
#define XDISABLE 0x0001 #define XDISABLE 0x0001
/********************** McBSP RCCR bit definitions *************************/ /********************** McBSP RCCR bit definitions *************************/
#define RFULL_CYCLE 0x0800
#define RDMAEN 0x0008 #define RDMAEN 0x0008
#define RDISABLE 0x0001 #define RDISABLE 0x0001
...@@ -267,6 +276,8 @@ struct omap_mcbsp_reg_cfg { ...@@ -267,6 +276,8 @@ struct omap_mcbsp_reg_cfg {
u16 rcerh; u16 rcerh;
u16 xcerg; u16 xcerg;
u16 xcerh; u16 xcerh;
u16 xccr;
u16 rccr;
}; };
typedef enum { typedef enum {
......
...@@ -173,6 +173,10 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) ...@@ -173,6 +173,10 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
}
} }
EXPORT_SYMBOL(omap_mcbsp_config); EXPORT_SYMBOL(omap_mcbsp_config);
......
...@@ -431,15 +431,6 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup) ...@@ -431,15 +431,6 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
/*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/
#if defined(CONFIG_USB_GADGET_OMAP) || \
defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \
(defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG))
static void usb_release(struct device *dev)
{
/* normally not freed */
}
#endif
#ifdef CONFIG_USB_GADGET_OMAP #ifdef CONFIG_USB_GADGET_OMAP
static struct resource udc_resources[] = { static struct resource udc_resources[] = {
...@@ -466,7 +457,6 @@ static struct platform_device udc_device = { ...@@ -466,7 +457,6 @@ static struct platform_device udc_device = {
.name = "omap_udc", .name = "omap_udc",
.id = -1, .id = -1,
.dev = { .dev = {
.release = usb_release,
.dma_mask = &udc_dmamask, .dma_mask = &udc_dmamask,
.coherent_dma_mask = 0xffffffff, .coherent_dma_mask = 0xffffffff,
}, },
...@@ -497,7 +487,6 @@ static struct platform_device ohci_device = { ...@@ -497,7 +487,6 @@ static struct platform_device ohci_device = {
.name = "ohci", .name = "ohci",
.id = -1, .id = -1,
.dev = { .dev = {
.release = usb_release,
.dma_mask = &ohci_dmamask, .dma_mask = &ohci_dmamask,
.coherent_dma_mask = 0xffffffff, .coherent_dma_mask = 0xffffffff,
}, },
...@@ -524,9 +513,6 @@ static struct resource otg_resources[] = { ...@@ -524,9 +513,6 @@ static struct resource otg_resources[] = {
static struct platform_device otg_device = { static struct platform_device otg_device = {
.name = "omap_otg", .name = "omap_otg",
.id = -1, .id = -1,
.dev = {
.release = usb_release,
},
.num_resources = ARRAY_SIZE(otg_resources), .num_resources = ARRAY_SIZE(otg_resources),
.resource = otg_resources, .resource = otg_resources,
}; };
......
...@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) ...@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev)
return -EBUSY; return -EBUSY;
if (cpu_is_omap24xx()) { if (cpu_is_omap24xx()) {
rng_ick = clk_get(NULL, "rng_ick"); rng_ick = clk_get(&pdev->dev, "rng_ick");
if (IS_ERR(rng_ick)) { if (IS_ERR(rng_ick)) {
dev_err(&pdev->dev, "Could not get rng_ick\n"); dev_err(&pdev->dev, "Could not get rng_ick\n");
ret = PTR_ERR(rng_ick); ret = PTR_ERR(rng_ick);
......
...@@ -76,6 +76,16 @@ config MMC_OMAP ...@@ -76,6 +76,16 @@ config MMC_OMAP
If unsure, say N. If unsure, say N.
config MMC_OMAP_HS
tristate "TI OMAP High Speed Multimedia Card Interface support"
depends on ARCH_OMAP2430 || ARCH_OMAP3
help
This selects the TI OMAP High Speed Multimedia card Interface.
If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot,
say Y or M here.
If unsure, say N.
config MMC_WBSD config MMC_WBSD
tristate "Winbond W83L51xD SD/MMC Card Interface support" tristate "Winbond W83L51xD SD/MMC Card Interface support"
depends on ISA_DMA_API depends on ISA_DMA_API
......
...@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o ...@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_AT91) += at91_mci.o
obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
......
This diff is collapsed.
...@@ -20,7 +20,7 @@ ...@@ -20,7 +20,7 @@
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/io.h> #include <linux/io.h>
#include <asm/dma.h> #include <mach/dma.h>
#include <mach/regs-sdi.h> #include <mach/regs-sdi.h>
#include <mach/regs-gpio.h> #include <mach/regs-gpio.h>
......
...@@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) ...@@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
} }
if (c->gpio_irq) { if (c->gpio_irq) {
if ((r = omap_request_gpio(c->gpio_irq)) < 0) { if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) {
dev_err(&pdev->dev, "Failed to request GPIO%d for " dev_err(&pdev->dev, "Failed to request GPIO%d for "
"OneNAND\n", c->gpio_irq); "OneNAND\n", c->gpio_irq);
goto err_iounmap; goto err_iounmap;
...@@ -726,7 +726,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) ...@@ -726,7 +726,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
free_irq(gpio_to_irq(c->gpio_irq), c); free_irq(gpio_to_irq(c->gpio_irq), c);
err_release_gpio: err_release_gpio:
if (c->gpio_irq) if (c->gpio_irq)
omap_free_gpio(c->gpio_irq); gpio_free(c->gpio_irq);
err_iounmap: err_iounmap:
iounmap(c->onenand.base); iounmap(c->onenand.base);
err_release_mem_region: err_release_mem_region:
...@@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) ...@@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
platform_set_drvdata(pdev, NULL); platform_set_drvdata(pdev, NULL);
if (c->gpio_irq) { if (c->gpio_irq) {
free_irq(gpio_to_irq(c->gpio_irq), c); free_irq(gpio_to_irq(c->gpio_irq), c);
omap_free_gpio(c->gpio_irq); gpio_free(c->gpio_irq);
} }
iounmap(c->onenand.base); iounmap(c->onenand.base);
release_mem_region(c->phys_base, ONENAND_IO_SIZE); release_mem_region(c->phys_base, ONENAND_IO_SIZE);
......
...@@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev) ...@@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev)
/* /*
* Stop the chip. * Stop the chip.
*/ */
spin_lock_irqsave(priv->chip_lock, flags); spin_lock_irqsave(&priv->chip_lock, flags);
write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP); write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP);
spin_unlock_irqrestore(priv->chip_lock, flags); spin_unlock_irqrestore(&priv->chip_lock, flags);
write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */ write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */
write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */ write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */
...@@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev) ...@@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev)
netif_stop_queue(dev); netif_stop_queue(dev);
netif_carrier_off(dev); netif_carrier_off(dev);
spin_lock_irqsave(priv->chip_lock, flags); spin_lock_irqsave(&priv->chip_lock, flags);
write_rreg (dev->base_addr, CSR0, CSR0_STOP); write_rreg (dev->base_addr, CSR0, CSR0_STOP);
write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); write_rreg (dev->base_addr, CSR3, CSR3_MASKALL);
spin_unlock_irqrestore(priv->chip_lock, flags); spin_unlock_irqrestore(&priv->chip_lock, flags);
free_irq (dev->irq, dev); free_irq (dev->irq, dev);
...@@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) ...@@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
am79c961_mc_hash(dmi, multi_hash); am79c961_mc_hash(dmi, multi_hash);
} }
spin_lock_irqsave(priv->chip_lock, flags); spin_lock_irqsave(&priv->chip_lock, flags);
stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP;
...@@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev) ...@@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev)
* Spin waiting for chip to report suspend mode * Spin waiting for chip to report suspend mode
*/ */
while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) { while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) {
spin_unlock_irqrestore(priv->chip_lock, flags); spin_unlock_irqrestore(&priv->chip_lock, flags);
nop(); nop();
spin_lock_irqsave(priv->chip_lock, flags); spin_lock_irqsave(&priv->chip_lock, flags);
} }
} }
...@@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) ...@@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev)
write_rreg(dev->base_addr, CTRL1, 0); write_rreg(dev->base_addr, CTRL1, 0);
} }
spin_unlock_irqrestore(priv->chip_lock, flags); spin_unlock_irqrestore(&priv->chip_lock, flags);
} }
static void am79c961_timeout(struct net_device *dev) static void am79c961_timeout(struct net_device *dev)
...@@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev) ...@@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev)
am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP); am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP);
priv->txhead = head; priv->txhead = head;
spin_lock_irqsave(priv->chip_lock, flags); spin_lock_irqsave(&priv->chip_lock, flags);
write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA); write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA);
dev->trans_start = jiffies; dev->trans_start = jiffies;
spin_unlock_irqrestore(priv->chip_lock, flags); spin_unlock_irqrestore(&priv->chip_lock, flags);
/* /*
* If the next packet is owned by the ethernet device, * If the next packet is owned by the ethernet device,
......
...@@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, ...@@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver,
return -ENODEV; return -ENODEV;
} }
usb_host_ck = clk_get(0, "usb_hhc_ck"); usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck");
if (IS_ERR(usb_host_ck)) if (IS_ERR(usb_host_ck))
return PTR_ERR(usb_host_ck); return PTR_ERR(usb_host_ck);
if (!cpu_is_omap15xx()) if (!cpu_is_omap15xx())
usb_dc_ck = clk_get(0, "usb_dc_ck"); usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck");
else else
usb_dc_ck = clk_get(0, "lb_ck"); usb_dc_ck = clk_get(&pdev->dev, "lb_ck");
if (IS_ERR(usb_dc_ck)) { if (IS_ERR(usb_dc_ck)) {
clk_put(usb_host_ck); clk_put(usb_host_ck);
......
...@@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, ...@@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
/* FIXME: /* FIXME:
* According to errata some platforms have a clock rate limitiation * According to errata some platforms have a clock rate limitiation
*/ */
lcdc.lcd_ck = clk_get(NULL, "lcd_ck"); lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
if (IS_ERR(lcdc.lcd_ck)) { if (IS_ERR(lcdc.lcd_ck)) {
dev_err(fbdev->dev, "unable to access LCD clock\n"); dev_err(fbdev->dev, "unable to access LCD clock\n");
r = PTR_ERR(lcdc.lcd_ck); r = PTR_ERR(lcdc.lcd_ck);
goto fail0; goto fail0;
} }
tc_ck = clk_get(NULL, "tc_ck"); tc_ck = clk_get(fbdev->dev, "tc_ck");
if (IS_ERR(tc_ck)) { if (IS_ERR(tc_ck)) {
dev_err(fbdev->dev, "unable to access TC clock\n"); dev_err(fbdev->dev, "unable to access TC clock\n");
r = PTR_ERR(tc_ck); r = PTR_ERR(tc_ck);
......
...@@ -187,10 +187,10 @@ config EP93XX_WATCHDOG ...@@ -187,10 +187,10 @@ config EP93XX_WATCHDOG
config OMAP_WATCHDOG config OMAP_WATCHDOG
tristate "OMAP Watchdog" tristate "OMAP Watchdog"
depends on ARCH_OMAP16XX || ARCH_OMAP24XX depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help help
Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y'
enable the OMAP1610/OMAP1710 watchdog timer. here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.
config PNX4008_WATCHDOG config PNX4008_WATCHDOG
tristate "PNX4008 Watchdog" tristate "PNX4008 Watchdog"
......
...@@ -13,6 +13,7 @@ ...@@ -13,6 +13,7 @@
#include <linux/errno.h> #include <linux/errno.h>
#include <linux/fs.h> #include <linux/fs.h>
#include <linux/init.h> #include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h> #include <linux/kernel.h>
#include <linux/miscdevice.h> #include <linux/miscdevice.h>
#include <linux/module.h> #include <linux/module.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment