Commit 6697c693 authored by John Crispin's avatar John Crispin Committed by Ralf Baechle

MIPS: lantiq: cleanup reset code

Add 2 new soc specifc handlers and remove superflous pr_notice calls.
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3705/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 215ed200
......@@ -48,7 +48,8 @@ extern spinlock_t ebu_lock;
extern void ltq_disable_irq(struct irq_data *data);
extern void ltq_mask_and_ack_irq(struct irq_data *data);
extern void ltq_enable_irq(struct irq_data *data);
/* find out what bootsource we have */
extern unsigned char ltq_boot_select(void);
/* find out what caused the last cpu reset */
extern int ltq_reset_cause(void);
#define LTQ_RST_CAUSE_WDTRST 0x20
......
......@@ -49,6 +49,16 @@
#define LTQ_ASC1_BASE_ADDR 0x1E100C00
#define LTQ_ASC_SIZE 0x400
/* BOOT_SEL - find what boot media we have */
#define BS_EXT_ROM 0x0
#define BS_FLASH 0x1
#define BS_MII0 0x2
#define BS_PCI 0x3
#define BS_UART1 0x4
#define BS_SPI 0x5
#define BS_NAND 0x6
#define BS_RMII0 0x7
/*
* during early_printk no ioremap is possible
* lets use KSEG1 instead
......
......@@ -11,19 +11,31 @@
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/export.h>
#include <linux/delay.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/reboot.h>
#include <lantiq_soc.h>
#include "../prom.h"
#define ltq_rcu_w32(x, y) ltq_w32((x), ltq_rcu_membase + (y))
#define ltq_rcu_r32(x) ltq_r32(ltq_rcu_membase + (x))
/* register definitions */
#define LTQ_RCU_RST 0x0010
#define LTQ_RCU_RST_ALL 0x40000000
/* reset request register */
#define RCU_RST_REQ 0x0010
/* reset status register */
#define RCU_RST_STAT 0x0014
#define LTQ_RCU_RST_STAT 0x0014
#define LTQ_RCU_STAT_SHIFT 26
/* reboot bit */
#define RCU_RD_SRST BIT(30)
/* reset cause */
#define RCU_STAT_SHIFT 26
/* boot selection */
#define RCU_BOOT_SEL_SHIFT 26
#define RCU_BOOT_SEL_MASK 0x7
static struct resource ltq_rcu_resource = {
.name = "rcu",
......@@ -38,29 +50,41 @@ static void __iomem *ltq_rcu_membase;
/* This function is used by the watchdog driver */
int ltq_reset_cause(void)
{
u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
return val >> LTQ_RCU_STAT_SHIFT;
u32 val = ltq_rcu_r32(RCU_RST_STAT);
return val >> RCU_STAT_SHIFT;
}
EXPORT_SYMBOL_GPL(ltq_reset_cause);
/* allow platform code to find out what source we booted from */
unsigned char ltq_boot_select(void)
{
u32 val = ltq_rcu_r32(RCU_RST_STAT);
return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
}
/* reset a io domain for u micro seconds */
void ltq_reset_once(unsigned int module, ulong u)
{
ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
udelay(u);
ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
}
static void ltq_machine_restart(char *command)
{
pr_notice("System restart\n");
local_irq_disable();
ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
unreachable();
}
static void ltq_machine_halt(void)
{
pr_notice("System halted.\n");
local_irq_disable();
unreachable();
}
static void ltq_machine_power_off(void)
{
pr_notice("Please turn off the power now.\n");
local_irq_disable();
unreachable();
}
......@@ -79,7 +103,7 @@ static int __init mips_reboot_setup(void)
ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
resource_size(&ltq_rcu_resource));
if (!ltq_rcu_membase)
panic("Failed to remap rcu memory");
panic("Failed to remap core memory");
_machine_restart = ltq_machine_restart;
_machine_halt = ltq_machine_halt;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment