MIPS: lantiq: cleanup reset code

Add 2 new soc specifc handlers and remove superflous pr_notice calls.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/3705/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/mach-lantiq/lantiq.h

@@ -48,7 +48,8 @@ extern spinlock_t ebu_lock;
 extern void ltq_disable_irq(struct irq_data *data);
 extern void ltq_mask_and_ack_irq(struct irq_data *data);
 extern void ltq_enable_irq(struct irq_data *data);
-
+/* find out what bootsource we have */
+extern unsigned char ltq_boot_select(void);
 /* find out what caused the last cpu reset */
 extern int ltq_reset_cause(void);
 #define LTQ_RST_CAUSE_WDTRST	0x20

arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h

@@ -49,6 +49,16 @@
 #define LTQ_ASC1_BASE_ADDR	0x1E100C00
 #define LTQ_ASC_SIZE		0x400
 
+/* BOOT_SEL - find what boot media we have */
+#define BS_EXT_ROM		0x0
+#define BS_FLASH		0x1
+#define BS_MII0			0x2
+#define BS_PCI			0x3
+#define BS_UART1		0x4
+#define BS_SPI			0x5
+#define BS_NAND			0x6
+#define BS_RMII0		0x7
+
 /*
  * during early_printk no ioremap is possible
  * lets use KSEG1 instead

arch/mips/lantiq/xway/reset.c

@@ -11,19 +11,31 @@
 #include <linux/ioport.h>
 #include <linux/pm.h>
 #include <linux/export.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
 #include <asm/reboot.h>
 
 #include <lantiq_soc.h>
 
+#include "../prom.h"
+
 #define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
 #define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
 
-/* register definitions */
-#define LTQ_RCU_RST		0x0010
-#define LTQ_RCU_RST_ALL		0x40000000
+/* reset request register */
+#define RCU_RST_REQ		0x0010
+/* reset status register */
+#define RCU_RST_STAT		0x0014
 
-#define LTQ_RCU_RST_STAT	0x0014
-#define LTQ_RCU_STAT_SHIFT	26
+/* reboot bit */
+#define RCU_RD_SRST		BIT(30)
+/* reset cause */
+#define RCU_STAT_SHIFT		26
+/* boot selection */
+#define RCU_BOOT_SEL_SHIFT	26
+#define RCU_BOOT_SEL_MASK	0x7
 
 static struct resource ltq_rcu_resource = {
 	.name   = "rcu",
@@ -38,29 +50,41 @@ static void __iomem *ltq_rcu_membase;
 /* This function is used by the watchdog driver */
 int ltq_reset_cause(void)
 {
-	u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
-	return val >> LTQ_RCU_STAT_SHIFT;
+	u32 val = ltq_rcu_r32(RCU_RST_STAT);
+	return val >> RCU_STAT_SHIFT;
 }
 EXPORT_SYMBOL_GPL(ltq_reset_cause);
 
+/* allow platform code to find out what source we booted from */
+unsigned char ltq_boot_select(void)
+{
+	u32 val = ltq_rcu_r32(RCU_RST_STAT);
+	return (val >> RCU_BOOT_SEL_SHIFT) & RCU_BOOT_SEL_MASK;
+}
+
+/* reset a io domain for u micro seconds */
+void ltq_reset_once(unsigned int module, ulong u)
+{
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | module, RCU_RST_REQ);
+	udelay(u);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~module, RCU_RST_REQ);
+}
+
 static void ltq_machine_restart(char *command)
 {
-	pr_notice("System restart\n");
 	local_irq_disable();
-	ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+	ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | RCU_RD_SRST, RCU_RST_REQ);
 	unreachable();
 }
 
 static void ltq_machine_halt(void)
 {
-	pr_notice("System halted.\n");
 	local_irq_disable();
 	unreachable();
 }
 
 static void ltq_machine_power_off(void)
 {
-	pr_notice("Please turn off the power now.\n");
 	local_irq_disable();
 	unreachable();
 }
@@ -79,7 +103,7 @@ static int __init mips_reboot_setup(void)
 	ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
 				resource_size(&ltq_rcu_resource));
 	if (!ltq_rcu_membase)
-		panic("Failed to remap rcu memory");
+		panic("Failed to remap core memory");
 
 	_machine_restart = ltq_machine_restart;
 	_machine_halt = ltq_machine_halt;