Commit 6c8e1b33 authored by Brian Norris's avatar Brian Norris

mtd: st_spi_fsm: begin using spi-nor.h opcodes

Many of the serial_flash_cmds.h opcodes are duplicated with spi-nor.h.
Let's begin to unify them.
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Acked-by: default avatarLee Jones <lee.jones@linaro.org>
Reviewed-by: default avatarMarek Vasut <marex@denx.de>
parent 92d3af9a
...@@ -13,25 +13,12 @@ ...@@ -13,25 +13,12 @@
#define _MTD_SERIAL_FLASH_CMDS_H #define _MTD_SERIAL_FLASH_CMDS_H
/* Generic Flash Commands/OPCODEs */ /* Generic Flash Commands/OPCODEs */
#define SPINOR_OP_WREN 0x06
#define SPINOR_OP_WRDI 0x04
#define SPINOR_OP_RDID 0x9f
#define SPINOR_OP_RDSR 0x05
#define SPINOR_OP_RDSR2 0x35 #define SPINOR_OP_RDSR2 0x35
#define SPINOR_OP_WRSR 0x01
#define SPINOR_OP_SE_4K 0x20
#define SPINOR_OP_SE_32K 0x52
#define SPINOR_OP_SE 0xd8
#define SPINOR_OP_CHIPERASE 0xc7
#define SPINOR_OP_WRVCR 0x81 #define SPINOR_OP_WRVCR 0x81
#define SPINOR_OP_RDVCR 0x85 #define SPINOR_OP_RDVCR 0x85
/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */ /* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
#define SPINOR_OP_READ 0x03 /* READ */
#define SPINOR_OP_READ_FAST 0x0b /* FAST READ */
#define SPINOR_OP_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */ #define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */
#define SPINOR_OP_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */ #define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */
#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */ #define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */
...@@ -40,15 +27,8 @@ ...@@ -40,15 +27,8 @@
#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */ #define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */ #define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
#define SPINOR_OP_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
#define SPINOR_OP_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
/* READ commands with 32-bit addressing */ /* READ commands with 32-bit addressing */
#define SPINOR_OP_READ4 0x13
#define SPINOR_OP_READ4_FAST 0x0c
#define SPINOR_OP_READ4_1_1_2 0x3c
#define SPINOR_OP_READ4_1_2_2 0xbc #define SPINOR_OP_READ4_1_2_2 0xbc
#define SPINOR_OP_READ4_1_1_4 0x6c
#define SPINOR_OP_READ4_1_4_4 0xec #define SPINOR_OP_READ4_1_4_4 0xec
/* Configuration flags */ /* Configuration flags */
......
...@@ -19,6 +19,7 @@ ...@@ -19,6 +19,7 @@
#include <linux/mfd/syscon.h> #include <linux/mfd/syscon.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/mtd/spi-nor.h>
#include <linux/sched.h> #include <linux/sched.h>
#include <linux/delay.h> #include <linux/delay.h>
#include <linux/io.h> #include <linux/io.h>
...@@ -522,7 +523,7 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq) ...@@ -522,7 +523,7 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
{ {
seq->seq_opc[0] = (SEQ_OPC_PADS_1 | seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(SPINOR_OP_EN4B_ADDR) | SEQ_OPC_OPCODE(SPINOR_OP_EN4B) |
SEQ_OPC_CSDEASSERT); SEQ_OPC_CSDEASSERT);
seq->seq[0] = STFSM_INST_CMD1; seq->seq[0] = STFSM_INST_CMD1;
...@@ -630,7 +631,7 @@ static struct stfsm_seq stfsm_seq_erase_chip = { ...@@ -630,7 +631,7 @@ static struct stfsm_seq stfsm_seq_erase_chip = {
SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT), SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(SPINOR_OP_CHIPERASE) | SEQ_OPC_CSDEASSERT), SEQ_OPC_OPCODE(SPINOR_OP_CHIP_ERASE) | SEQ_OPC_CSDEASSERT),
}, },
.seq = { .seq = {
STFSM_INST_CMD1, STFSM_INST_CMD1,
...@@ -665,7 +666,7 @@ static struct stfsm_seq stfsm_seq_write_status = { ...@@ -665,7 +666,7 @@ static struct stfsm_seq stfsm_seq_write_status = {
static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq) static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
{ {
seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(SPINOR_OP_EN4B_ADDR)); SEQ_OPC_OPCODE(SPINOR_OP_EN4B));
seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) | seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
SEQ_OPC_CSDEASSERT); SEQ_OPC_CSDEASSERT);
...@@ -788,7 +789,7 @@ static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf, ...@@ -788,7 +789,7 @@ static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter) static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
{ {
struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr; struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr;
uint32_t cmd = enter ? SPINOR_OP_EN4B_ADDR : SPINOR_OP_EX4B_ADDR; uint32_t cmd = enter ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
seq->seq_opc[0] = (SEQ_OPC_PADS_1 | seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) | SEQ_OPC_CYCLES(8) |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment