ide: add ->set_irq method

Add ->set_irq method for setting nIEN bit of ATA Device Control
register and use it instead of ide_set_irq().

While at it:

* Use ->set_irq in init_irq() and do_reset1().

* Don't use HWIF() macro in ide_check_pm_state().

There should be no functional changes caused by this patch.
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 1f6d8a0f
......@@ -746,16 +746,17 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
* the bus may be broken enough to walk on our toes at this
* point.
*/
ide_hwif_t *hwif = drive->hwif;
int rc;
#ifdef DEBUG_PM
printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
#endif
rc = ide_wait_not_busy(HWIF(drive), 35000);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
SELECT_DRIVE(drive);
ide_set_irq(drive, 1);
rc = ide_wait_not_busy(HWIF(drive), 100000);
hwif->set_irq(hwif, 1);
rc = ide_wait_not_busy(hwif, 100000);
if (rc)
printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
}
......@@ -1041,7 +1042,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
* quirk_list may not like intr setups/cleanups
*/
if (drive->quirk_list != 1)
ide_set_irq(drive, 0);
hwif->set_irq(hwif, 0);
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
......@@ -1519,6 +1520,7 @@ EXPORT_SYMBOL(ide_do_drive_cmd);
void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
{
ide_hwif_t *hwif = drive->hwif;
ide_task_t task;
memset(&task, 0, sizeof(task));
......@@ -1529,9 +1531,9 @@ void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
task.tf.lbah = (bcount >> 8) & 0xff;
ide_tf_dump(drive->name, &task.tf);
ide_set_irq(drive, 1);
hwif->set_irq(hwif, 1);
SELECT_MASK(drive, 0);
drive->hwif->tf_load(drive, &task);
hwif->tf_load(drive, &task);
}
EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
......
......@@ -135,6 +135,23 @@ static u8 ide_read_sff_dma_status(ide_hwif_t *hwif)
return inb(hwif->dma_base + ATA_DMA_STATUS);
}
static void ide_set_irq(ide_hwif_t *hwif, int on)
{
u8 ctl = ATA_DEVCTL_OBS;
if (on == 4) { /* hack for SRST */
ctl |= 4;
on &= ~4;
}
ctl |= on ? 0 : 2;
if (hwif->host_flags & IDE_HFLAG_MMIO)
writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
else
outb(ctl, hwif->io_ports.ctl_addr);
}
static void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
{
ide_hwif_t *hwif = drive->hwif;
......@@ -360,6 +377,8 @@ void default_hwif_transport(ide_hwif_t *hwif)
hwif->read_altstatus = ide_read_altstatus;
hwif->read_sff_dma_status = ide_read_sff_dma_status;
hwif->set_irq = ide_set_irq;
hwif->tf_load = ide_tf_load;
hwif->tf_read = ide_tf_read;
......@@ -722,7 +741,7 @@ int ide_driveid_update(ide_drive_t *drive)
*/
SELECT_MASK(drive, 1);
ide_set_irq(drive, 0);
hwif->set_irq(hwif, 0);
msleep(50);
hwif->exec_command(hwif, WIN_IDENTIFY);
timeout = jiffies + WAIT_WORSTCASE;
......@@ -808,12 +827,12 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
SELECT_DRIVE(drive);
SELECT_MASK(drive, 0);
udelay(1);
ide_set_irq(drive, 0);
hwif->set_irq(hwif, 0);
hwif->OUTB(speed, io_ports->nsect_addr);
hwif->OUTB(SETFEATURES_XFER, io_ports->feature_addr);
hwif->exec_command(hwif, WIN_SETFEATURES);
if (drive->quirk_list == 2)
ide_set_irq(drive, 1);
hwif->set_irq(hwif, 1);
error = __ide_wait_stat(drive, drive->ready_stat,
BUSY_STAT|DRQ_STAT|ERR_STAT,
......@@ -1129,7 +1148,6 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
ide_hwgroup_t *hwgroup;
struct ide_io_ports *io_ports;
const struct ide_port_ops *port_ops;
u8 ctl;
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
......@@ -1174,16 +1192,15 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
* immediate interrupt due to the edge transition it produces.
* This single interrupt gives us a "fast poll" for drives that
* recover from reset very quickly, saving us the first 50ms wait time.
*
* TODO: add ->softreset method and stop abusing ->set_irq
*/
/* set SRST and nIEN */
hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | 6, io_ports->ctl_addr);
hwif->set_irq(hwif, 4);
/* more than enough time */
udelay(10);
if (drive->quirk_list == 2)
ctl = ATA_DEVCTL_OBS; /* clear SRST and nIEN */
else
ctl = ATA_DEVCTL_OBS | 2; /* clear SRST, leave nIEN */
hwif->OUTBSYNC(hwif, ctl, io_ports->ctl_addr);
/* clear SRST, leave nIEN (unless device is on the quirk list) */
hwif->set_irq(hwif, drive->quirk_list == 2);
/* more than enough time */
udelay(10);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
......
......@@ -361,7 +361,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
autoprobe = 1;
cookie = probe_irq_on();
}
ide_set_irq(drive, autoprobe);
hwif->set_irq(hwif, autoprobe);
}
retval = actual_try_to_identify(drive, cmd);
......@@ -369,7 +369,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd)
if (autoprobe) {
int irq;
ide_set_irq(drive, 0);
hwif->set_irq(hwif, 0);
/* clear drive IRQ */
(void)hwif->read_status(hwif);
udelay(5);
......@@ -709,7 +709,7 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
/* Ignore disks that we will not probe for later. */
if (!drive->noprobe || drive->present) {
SELECT_DRIVE(drive);
ide_set_irq(drive, 1);
hwif->set_irq(hwif, 1);
mdelay(2);
rc = ide_wait_not_busy(hwif, 35000);
if (rc)
......@@ -1066,8 +1066,7 @@ static int init_irq (ide_hwif_t *hwif)
sa = IRQF_SHARED;
if (io_ports->ctl_addr)
/* clear nIEN */
hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS, io_ports->ctl_addr);
hwif->set_irq(hwif, 1);
if (request_irq(hwif->irq,&ide_intr,sa,hwif->name,hwgroup))
goto out_unlink;
......
......@@ -80,7 +80,7 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
ide_tf_dump(drive->name, tf);
ide_set_irq(drive, 1);
hwif->set_irq(hwif, 1);
SELECT_MASK(drive, 0);
hwif->tf_load(drive, task);
}
......
......@@ -149,6 +149,23 @@ static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
return (u8)in_be32((void *)(hwif->dma_base + 4));
}
static void scc_set_irq(ide_hwif_t *hwif, int on)
{
u8 ctl = ATA_DEVCTL_OBS;
if (on == 4) { /* hack for SRST */
ctl |= 4;
on &= ~4;
}
ctl |= on ? 0 : 2;
out_be32((void *)hwif->io_ports.ctl_addr, ctl);
eieio();
in_be32((void *)(hwif->dma_base + 0x01c));
eieio();
}
static void scc_ide_insw(unsigned long port, void *addr, u32 count)
{
u16 *ptr = (u16 *)addr;
......@@ -802,6 +819,8 @@ static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
hwif->read_altstatus = scc_read_altstatus;
hwif->read_sff_dma_status = scc_read_sff_dma_status;
hwif->set_irq = scc_set_irq;
hwif->tf_load = scc_tf_load;
hwif->tf_read = scc_tf_read;
......
......@@ -502,6 +502,22 @@ static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
+ IDE_TIMING_CONFIG));
}
static void pmac_set_irq(ide_hwif_t *hwif, int on)
{
u8 ctl = ATA_DEVCTL_OBS;
if (on == 4) { /* hack for SRST */
ctl |= 4;
on &= ~4;
}
ctl |= on ? 0 : 2;
writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
(void)readl((void __iomem *)(hwif->io_ports.data_addr
+ IDE_TIMING_CONFIG));
}
/*
* Old tuning functions (called on hdparm -p), sets up drive PIO timings
*/
......@@ -1100,6 +1116,7 @@ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, hw_regs_t *hw)
return -ENOENT;
hwif->exec_command = pmac_exec_command;
hwif->set_irq = pmac_set_irq;
/* Setup MMIO ops */
default_hwif_mmiops(hwif);
......
......@@ -494,6 +494,8 @@ typedef struct hwif_s {
u8 (*read_altstatus)(struct hwif_s *);
u8 (*read_sff_dma_status)(struct hwif_s *);
void (*set_irq)(struct hwif_s *, int);
void (*tf_load)(ide_drive_t *, struct ide_task_s *);
void (*tf_read)(ide_drive_t *, struct ide_task_s *);
......@@ -1356,14 +1358,6 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
return &hwif->drives[(drive->dn ^ 1) & 1];
}
static inline void ide_set_irq(ide_drive_t *drive, int on)
{
ide_hwif_t *hwif = drive->hwif;
hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2),
hwif->io_ports.ctl_addr);
}
static inline u8 ide_read_error(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment