Merge branch 'ingenic-tcu-v5.4' into mips-next

Merge the Ingenic TCU patchset from the ingenic-tcu-v5.4 branch which
was created to enable follow-on changes in other subsystems.
Signed-off-by: Paul Burton <paul.burton@mips.com>

Documentation/devicetree/bindings/pwm/ingenic,jz47xx-pwm.txt

-Ingenic JZ47xx PWM Controller
-=============================
-
-Required properties:
-- compatible: Should be "ingenic,jz4740-pwm"
-- #pwm-cells: Should be 3. See pwm.txt in this directory for a description
-  of the cells format.
-- clocks : phandle to the external clock.
-- clock-names : Should be "ext".
-
-
-Example:
-
-	pwm: pwm@10002000 {
-		compatible = "ingenic,jz4740-pwm";
-		reg = <0x10002000 0x1000>;
-
-		#pwm-cells = <3>;
-
-		clocks = <&ext>;
-		clock-names = "ext";
-	};

Documentation/devicetree/bindings/timer/ingenic,tcu.txt

+Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
+==========================================================
+
+For a description of the TCU hardware and drivers, have a look at
+Documentation/mips/ingenic-tcu.txt.
+
+Required properties:
+
+- compatible: Must be one of:
+  * ingenic,jz4740-tcu
+  * ingenic,jz4725b-tcu
+  * ingenic,jz4770-tcu
+  followed by "simple-mfd".
+- reg: Should be the offset/length value corresponding to the TCU registers
+- clocks: List of phandle & clock specifiers for clocks external to the TCU.
+  The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
+  should be provided if the SoC has it.
+- clock-names: List of name strings for the external clocks.
+- #clock-cells: Should be <1>;
+  Clock consumers specify this argument to identify a clock. The valid values
+  may be found in <dt-bindings/clock/ingenic,tcu.h>.
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value should be 1.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Optional properties:
+
+- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
+  Default value is 0xfc.
+
+
+Children nodes
+==========================================================
+
+
+PWM node:
+---------
+
+Required properties:
+
+- compatible: Must be one of:
+  * ingenic,jz4740-pwm
+  * ingenic,jz4725b-pwm
+- #pwm-cells: Should be 3. See ../pwm/pwm.txt for a description of the cell
+  format.
+- clocks: List of phandle & clock specifiers for the TCU clocks.
+- clock-names: List of name strings for the TCU clocks.
+
+
+Watchdog node:
+--------------
+
+Required properties:
+
+- compatible: Must be "ingenic,jz4740-watchdog"
+- clocks: phandle to the WDT clock
+- clock-names: should be "wdt"
+
+
+OS Timer node:
+---------
+
+Required properties:
+
+- compatible: Must be one of:
+  * ingenic,jz4725b-ost
+  * ingenic,jz4770-ost
+- clocks: phandle to the OST clock
+- clock-names: should be "ost"
+- interrupts : Specifies the interrupt the OST is connected to.
+
+
+Example
+==========================================================
+
+#include <dt-bindings/clock/jz4770-cgu.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/ {
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4770-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_RTC
+			  &cgu JZ4770_CLK_EXT
+			  &cgu JZ4770_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+
+		watchdog: watchdog@0 {
+			compatible = "ingenic,jz4740-watchdog";
+			reg = <0x0 0xc>;
+
+			clocks = <&tcu TCU_CLK_WDT>;
+			clock-names = "wdt";
+		};
+
+		pwm: pwm@40 {
+			compatible = "ingenic,jz4740-pwm";
+			reg = <0x40 0x80>;
+
+			#pwm-cells = <3>;
+
+			clocks = <&tcu TCU_CLK_TIMER0
+				  &tcu TCU_CLK_TIMER1
+				  &tcu TCU_CLK_TIMER2
+				  &tcu TCU_CLK_TIMER3
+				  &tcu TCU_CLK_TIMER4
+				  &tcu TCU_CLK_TIMER5
+				  &tcu TCU_CLK_TIMER6
+				  &tcu TCU_CLK_TIMER7>;
+			clock-names = "timer0", "timer1", "timer2", "timer3",
+				      "timer4", "timer5", "timer6", "timer7";
+		};
+
+		ost: timer@e0 {
+			compatible = "ingenic,jz4770-ost";
+			reg = <0xe0 0x20>;
+
+			clocks = <&tcu TCU_CLK_OST>;
+			clock-names = "ost";
+
+			interrupts = <15>;
+		};
+	};
+};

Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt

-Ingenic Watchdog Timer (WDT) Controller for JZ4740 & JZ4780
-
-Required properties:
-compatible: "ingenic,jz4740-watchdog" or "ingenic,jz4780-watchdog"
-reg: Register address and length for watchdog registers
-clocks: phandle to the RTC clock
-clock-names: should be "rtc"
-
-Example:
-
-watchdog: jz4740-watchdog@10002000 {
-	compatible = "ingenic,jz4740-watchdog";
-	reg = <0x10002000 0x10>;
-
-	clocks = <&cgu JZ4740_CLK_RTC>;
-	clock-names = "rtc";
-};

Documentation/index.rst

@@ -143,6 +143,7 @@ implementation.
    arm64/index
    ia64/index
    m68k/index
+   mips/index
    riscv/index
    s390/index
    sh/index

Documentation/mips/index.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+===========================
+MIPS-specific Documentation
+===========================
+
+.. toctree::
+   :maxdepth: 1
+   :numbered:
+
+   ingenic-tcu

Documentation/mips/ingenic-tcu.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================
+Ingenic JZ47xx SoCs Timer/Counter Unit hardware
+===============================================
+
+The Timer/Counter Unit (TCU) in Ingenic JZ47xx SoCs is a multi-function
+hardware block. It features up to to eight channels, that can be used as
+counters, timers, or PWM.
+
+- JZ4725B, JZ4750, JZ4755 only have six TCU channels. The other SoCs all
+  have eight channels.
+
+- JZ4725B introduced a separate channel, called Operating System Timer
+  (OST). It is a 32-bit programmable timer. On JZ4760B and above, it is
+  64-bit.
+
+- Each one of the TCU channels has its own clock, which can be reparented to three
+  different clocks (pclk, ext, rtc), gated, and reclocked, through their TCSR register.
+
+    - The watchdog and OST hardware blocks also feature a TCSR register with the same
+      format in their register space.
+    - The TCU registers used to gate/ungate can also gate/ungate the watchdog and
+      OST clocks.
+
+- Each TCU channel works in one of two modes:
+
+    - mode TCU1: channels cannot work in sleep mode, but are easier to
+      operate.
+    - mode TCU2: channels can work in sleep mode, but the operation is a bit
+      more complicated than with TCU1 channels.
+
+- The mode of each TCU channel depends on the SoC used:
+
+    - On the oldest SoCs (up to JZ4740), all of the eight channels operate in
+      TCU1 mode.
+    - On JZ4725B, channel 5 operates as TCU2, the others operate as TCU1.
+    - On newest SoCs (JZ4750 and above), channels 1-2 operate as TCU2, the
+      others operate as TCU1.
+
+- Each channel can generate an interrupt. Some channels share an interrupt
+  line, some don't, and this changes between SoC versions:
+
+    - on older SoCs (JZ4740 and below), channel 0 and channel 1 have their
+      own interrupt line; channels 2-7 share the last interrupt line.
+    - On JZ4725B, channel 0 has its own interrupt; channels 1-5 share one
+      interrupt line; the OST uses the last interrupt line.
+    - on newer SoCs (JZ4750 and above), channel 5 has its own interrupt;
+      channels 0-4 and (if eight channels) 6-7 all share one interrupt line;
+      the OST uses the last interrupt line.
+
+Implementation
+==============
+
+The functionalities of the TCU hardware are spread across multiple drivers:
+
+===========  =====
+clocks       drivers/clk/ingenic/tcu.c
+interrupts   drivers/irqchip/irq-ingenic-tcu.c
+timers       drivers/clocksource/ingenic-timer.c
+OST          drivers/clocksource/ingenic-ost.c
+PWM          drivers/pwm/pwm-jz4740.c
+watchdog     drivers/watchdog/jz4740_wdt.c
+===========  =====
+
+Because various functionalities of the TCU that belong to different drivers
+and frameworks can be controlled from the same registers, all of these
+drivers access their registers through the same regmap.
+
+For more information regarding the devicetree bindings of the TCU drivers,
+have a look at Documentation/devicetree/bindings/mfd/ingenic,tcu.txt.

arch/mips/boot/dts/ingenic/ci20.dts

@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
@@ -238,3 +239,9 @@ pins_mmc1: mmc1 {
 		bias-disable;
 	};
 };
+
+&tcu {
+	/* 3 MHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <3000000>, <3000000>;
+};

arch/mips/boot/dts/ingenic/gcw0.dts

@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include "jz4770.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
 
 / {
 	compatible = "gcw,zero", "ingenic,jz4770";
@@ -60,3 +61,12 @@ &uhc {
 	/* The WiFi module is connected to the UHC. */
 	status = "okay";
 };
+
+&tcu {
+	/* 750 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER2>;
+	assigned-clock-rates = <750000>, <750000>;
+
+	/* PWM1 is in use, so reserve channel #2 for the clocksource */
+	ingenic,pwm-channels-mask = <0xfa>;
+};

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -53,6 +53,28 @@ watchdog: watchdog@10002000 {
 		clock-names = "rtc";
 	};
 
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4740-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4740_CLK_RTC
+			  &cgu JZ4740_CLK_EXT
+			  &cgu JZ4740_CLK_PCLK
+			  &cgu JZ4740_CLK_TCU>;
+		clock-names = "rtc", "ext", "pclk", "tcu";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <23 22 21>;
+	};
+
 	rtc_dev: rtc@10003000 {
 		compatible = "ingenic,jz4740-rtc";
 		reg = <0x10003000 0x40>;

arch/mips/boot/dts/ingenic/jz4770.dtsi

@@ -46,6 +46,27 @@ cgu: jz4770-cgu@10000000 {
 		#clock-cells = <1>;
 	};
 
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4770-tcu", "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4770_CLK_RTC
+			  &cgu JZ4770_CLK_EXT
+			  &cgu JZ4770_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+	};
+
 	pinctrl: pin-controller@10010000 {
 		compatible = "ingenic,jz4770-pinctrl";
 		reg = <0x10010000 0x600>;

arch/mips/boot/dts/ingenic/jz4780.dtsi

@@ -46,6 +46,29 @@ cgu: jz4780-cgu@10000000 {
 		#clock-cells = <1>;
 	};
 
+	tcu: timer@10002000 {
+		compatible = "ingenic,jz4780-tcu",
+			     "ingenic,jz4770-tcu",
+			     "simple-mfd";
+		reg = <0x10002000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x10002000 0x1000>;
+
+		#clock-cells = <1>;
+
+		clocks = <&cgu JZ4780_CLK_RTCLK
+			  &cgu JZ4780_CLK_EXCLK
+			  &cgu JZ4780_CLK_PCLK>;
+		clock-names = "rtc", "ext", "pclk";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <27 26 25>;
+	};
+
 	rtc_dev: rtc@10003000 {
 		compatible = "ingenic,jz4780-rtc";
 		reg = <0x10003000 0x4c>;

arch/mips/boot/dts/ingenic/qi_lb60.dts

@@ -2,10 +2,10 @@
 /dts-v1/;
 
 #include "jz4740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/adc/ingenic,adc.h>
+#include <dt-bindings/clock/ingenic,tcu.h>
 #include <dt-bindings/input/input.h>
 
 #define KEY_QI_QI	KEY_F13
@@ -350,3 +350,9 @@ &mmc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_mmc>;
 };
+
+&tcu {
+	/* 750 kHz for the system timer and clocksource */
+	assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>;
+	assigned-clock-rates = <750000>, <750000>;
+};

arch/mips/jz4740/time.c

@@ -4,161 +4,14 @@
  *  JZ4740 platform time support
  */
 
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
+#include <linux/clocksource.h>
 
-#include <linux/clockchips.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach-jz4740/irq.h>
 #include <asm/mach-jz4740/timer.h>
-#include <asm/time.h>
-
-#define TIMER_CLOCKEVENT 0
-#define TIMER_CLOCKSOURCE 1
-
-static uint16_t jz4740_jiffies_per_tick;
-
-static u64 jz4740_clocksource_read(struct clocksource *cs)
-{
-	return jz4740_timer_get_count(TIMER_CLOCKSOURCE);
-}
-
-static struct clocksource jz4740_clocksource = {
-	.name = "jz4740-timer",
-	.rating = 200,
-	.read = jz4740_clocksource_read,
-	.mask = CLOCKSOURCE_MASK(16),
-	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u64 notrace jz4740_read_sched_clock(void)
-{
-	return jz4740_timer_get_count(TIMER_CLOCKSOURCE);
-}
-
-static irqreturn_t jz4740_clockevent_irq(int irq, void *devid)
-{
-	struct clock_event_device *cd = devid;
-
-	jz4740_timer_ack_full(TIMER_CLOCKEVENT);
-
-	if (!clockevent_state_periodic(cd))
-		jz4740_timer_disable(TIMER_CLOCKEVENT);
-
-	cd->event_handler(cd);
-
-	return IRQ_HANDLED;
-}
-
-static int jz4740_clockevent_set_periodic(struct clock_event_device *evt)
-{
-	jz4740_timer_set_count(TIMER_CLOCKEVENT, 0);
-	jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick);
-	jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
-	jz4740_timer_enable(TIMER_CLOCKEVENT);
-
-	return 0;
-}
-
-static int jz4740_clockevent_resume(struct clock_event_device *evt)
-{
-	jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
-	jz4740_timer_enable(TIMER_CLOCKEVENT);
-
-	return 0;
-}
-
-static int jz4740_clockevent_shutdown(struct clock_event_device *evt)
-{
-	jz4740_timer_disable(TIMER_CLOCKEVENT);
-
-	return 0;
-}
-
-static int jz4740_clockevent_set_next(unsigned long evt,
-	struct clock_event_device *cd)
-{
-	jz4740_timer_set_count(TIMER_CLOCKEVENT, 0);
-	jz4740_timer_set_period(TIMER_CLOCKEVENT, evt);
-	jz4740_timer_enable(TIMER_CLOCKEVENT);
-
-	return 0;
-}
-
-static struct clock_event_device jz4740_clockevent = {
-	.name = "jz4740-timer",
-	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_next_event = jz4740_clockevent_set_next,
-	.set_state_shutdown = jz4740_clockevent_shutdown,
-	.set_state_periodic = jz4740_clockevent_set_periodic,
-	.set_state_oneshot = jz4740_clockevent_shutdown,
-	.tick_resume = jz4740_clockevent_resume,
-	.rating = 200,
-#ifdef CONFIG_MACH_JZ4740
-	.irq = JZ4740_IRQ_TCU0,
-#endif
-#if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
-	.irq = JZ4780_IRQ_TCU2,
-#endif
-};
-
-static struct irqaction timer_irqaction = {
-	.handler	= jz4740_clockevent_irq,
-	.flags		= IRQF_PERCPU | IRQF_TIMER,
-	.name		= "jz4740-timerirq",
-	.dev_id		= &jz4740_clockevent,
-};
 
 void __init plat_time_init(void)
 {
-	int ret;
-	uint32_t clk_rate;
-	uint16_t ctrl;
-	struct clk *ext_clk;
-
 	of_clk_init(NULL);
 	jz4740_timer_init();
-
-	ext_clk = clk_get(NULL, "ext");
-	if (IS_ERR(ext_clk))
-		panic("unable to get ext clock");
-	clk_rate = clk_get_rate(ext_clk) >> 4;
-	clk_put(ext_clk);
-
-	jz4740_jiffies_per_tick = DIV_ROUND_CLOSEST(clk_rate, HZ);
-
-	clockevent_set_clock(&jz4740_clockevent, clk_rate);
-	jz4740_clockevent.min_delta_ns = clockevent_delta2ns(100, &jz4740_clockevent);
-	jz4740_clockevent.min_delta_ticks = 100;
-	jz4740_clockevent.max_delta_ns = clockevent_delta2ns(0xffff, &jz4740_clockevent);
-	jz4740_clockevent.max_delta_ticks = 0xffff;
-	jz4740_clockevent.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&jz4740_clockevent);
-
-	ret = clocksource_register_hz(&jz4740_clocksource, clk_rate);
-
-	if (ret)
-		printk(KERN_ERR "Failed to register clocksource: %d\n", ret);
-
-	sched_clock_register(jz4740_read_sched_clock, 16, clk_rate);
-
-	setup_irq(jz4740_clockevent.irq, &timer_irqaction);
-
-	ctrl = JZ_TIMER_CTRL_PRESCALE_16 | JZ_TIMER_CTRL_SRC_EXT;
-
-	jz4740_timer_set_ctrl(TIMER_CLOCKEVENT, ctrl);
-	jz4740_timer_set_ctrl(TIMER_CLOCKSOURCE, ctrl);
-
-	jz4740_timer_set_period(TIMER_CLOCKEVENT, jz4740_jiffies_per_tick);
-	jz4740_timer_irq_full_enable(TIMER_CLOCKEVENT);
-
-	jz4740_timer_set_period(TIMER_CLOCKSOURCE, 0xffff);
-
-	jz4740_timer_enable(TIMER_CLOCKEVENT);
-	jz4740_timer_enable(TIMER_CLOCKSOURCE);
+	timer_probe();
 }

drivers/clk/ingenic/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
-menu "Ingenic JZ47xx CGU drivers"
+menu "Ingenic SoCs drivers"
 	depends on MIPS
 
 config INGENIC_CGU_COMMON
@@ -45,4 +45,12 @@ config INGENIC_CGU_JZ4780
 
 	  If building for a JZ4780 SoC, you want to say Y here.
 
+config INGENIC_TCU_CLK
+	bool "Ingenic JZ47xx TCU clocks driver"
+	default MACH_INGENIC
+	select MFD_SYSCON
+	help
+	  Support the clocks of the Timer/Counter Unit (TCU) of the Ingenic
+	  JZ47xx SoCs.
+
 endmenu

drivers/clk/ingenic/Makefile

@@ -4,3 +4,4 @@ obj-$(CONFIG_INGENIC_CGU_JZ4740)	+= jz4740-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4725B)	+= jz4725b-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4770)	+= jz4770-cgu.o
 obj-$(CONFIG_INGENIC_CGU_JZ4780)	+= jz4780-cgu.o
+obj-$(CONFIG_INGENIC_TCU_CLK)		+= tcu.o

drivers/clk/ingenic/jz4740-cgu.c

@@ -222,6 +222,12 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.gate = { CGU_REG_CLKGR, 5 },
 	},
+
+	[JZ4740_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 1 },
+	},
 };
 
 static void __init jz4740_cgu_init(struct device_node *np)

drivers/clk/ingenic/tcu.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU clocks driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clockchips.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+/* 8 channels max + watchdog + OST */
+#define TCU_CLK_COUNT	10
+
+#undef pr_fmt
+#define pr_fmt(fmt) "ingenic-tcu-clk: " fmt
+
+enum tcu_clk_parent {
+	TCU_PARENT_PCLK,
+	TCU_PARENT_RTC,
+	TCU_PARENT_EXT,
+};
+
+struct ingenic_soc_info {
+	unsigned int num_channels;
+	bool has_ost;
+	bool has_tcu_clk;
+};
+
+struct ingenic_tcu_clk_info {
+	struct clk_init_data init_data;
+	u8 gate_bit;
+	u8 tcsr_reg;
+};
+
+struct ingenic_tcu_clk {
+	struct clk_hw hw;
+	unsigned int idx;
+	struct ingenic_tcu *tcu;
+	const struct ingenic_tcu_clk_info *info;
+};
+
+struct ingenic_tcu {
+	const struct ingenic_soc_info *soc_info;
+	struct regmap *map;
+	struct clk *clk;
+
+	struct clk_hw_onecell_data *clocks;
+};
+
+static struct ingenic_tcu *ingenic_tcu;
+
+static inline struct ingenic_tcu_clk *to_tcu_clk(struct clk_hw *hw)
+{
+	return container_of(hw, struct ingenic_tcu_clk, hw);
+}
+
+static int ingenic_tcu_enable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit));
+
+	return 0;
+}
+
+static void ingenic_tcu_disable(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static int ingenic_tcu_is_enabled(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int value;
+
+	regmap_read(tcu_clk->tcu->map, TCU_REG_TSR, &value);
+
+	return !(value & BIT(info->gate_bit));
+}
+
+static bool ingenic_tcu_enable_regs(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+	bool enabled = false;
+
+	/*
+	 * If the SoC has no global TCU clock, we must ungate the channel's
+	 * clock to be able to access its registers.
+	 * If we have a TCU clock, it will be enabled automatically as it has
+	 * been attached to the regmap.
+	 */
+	if (!tcu->clk) {
+		enabled = !!ingenic_tcu_is_enabled(hw);
+		regmap_write(tcu->map, TCU_REG_TSCR, BIT(info->gate_bit));
+	}
+
+	return enabled;
+}
+
+static void ingenic_tcu_disable_regs(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	struct ingenic_tcu *tcu = tcu_clk->tcu;
+
+	if (!tcu->clk)
+		regmap_write(tcu->map, TCU_REG_TSSR, BIT(info->gate_bit));
+}
+
+static u8 ingenic_tcu_get_parent(struct clk_hw *hw)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int val = 0;
+	int ret;
+
+	ret = regmap_read(tcu_clk->tcu->map, info->tcsr_reg, &val);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %d", tcu_clk->idx);
+
+	return ffs(val & TCU_TCSR_PARENT_CLOCK_MASK) - 1;
+}
+
+static int ingenic_tcu_set_parent(struct clk_hw *hw, u8 idx)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	bool was_enabled;
+	int ret;
+
+	was_enabled = ingenic_tcu_enable_regs(hw);
+
+	ret = regmap_update_bits(tcu_clk->tcu->map, info->tcsr_reg,
+				 TCU_TCSR_PARENT_CLOCK_MASK, BIT(idx));
+	WARN_ONCE(ret < 0, "Unable to update TCSR %d", tcu_clk->idx);
+
+	if (!was_enabled)
+		ingenic_tcu_disable_regs(hw);
+
+	return 0;
+}
+
+static unsigned long ingenic_tcu_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	unsigned int prescale;
+	int ret;
+
+	ret = regmap_read(tcu_clk->tcu->map, info->tcsr_reg, &prescale);
+	WARN_ONCE(ret < 0, "Unable to read TCSR %d", tcu_clk->idx);
+
+	prescale = (prescale & TCU_TCSR_PRESCALE_MASK) >> TCU_TCSR_PRESCALE_LSB;
+
+	return parent_rate >> (prescale * 2);
+}
+
+static u8 ingenic_tcu_get_prescale(unsigned long rate, unsigned long req_rate)
+{
+	u8 prescale;
+
+	for (prescale = 0; prescale < 5; prescale++)
+		if ((rate >> (prescale * 2)) <= req_rate)
+			return prescale;
+
+	return 5; /* /1024 divider */
+}
+
+static long ingenic_tcu_round_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long *parent_rate)
+{
+	unsigned long rate = *parent_rate;
+	u8 prescale;
+
+	if (req_rate > rate)
+		return -EINVAL;
+
+	prescale = ingenic_tcu_get_prescale(rate, req_rate);
+
+	return rate >> (prescale * 2);
+}
+
+static int ingenic_tcu_set_rate(struct clk_hw *hw, unsigned long req_rate,
+		unsigned long parent_rate)
+{
+	struct ingenic_tcu_clk *tcu_clk = to_tcu_clk(hw);
+	const struct ingenic_tcu_clk_info *info = tcu_clk->info;
+	u8 prescale = ingenic_tcu_get_prescale(parent_rate, req_rate);
+	bool was_enabled;
+	int ret;
+
+	was_enabled = ingenic_tcu_enable_regs(hw);
+
+	ret = regmap_update_bits(tcu_clk->tcu->map, info->tcsr_reg,
+				 TCU_TCSR_PRESCALE_MASK,
+				 prescale << TCU_TCSR_PRESCALE_LSB);
+	WARN_ONCE(ret < 0, "Unable to update TCSR %d", tcu_clk->idx);
+
+	if (!was_enabled)
+		ingenic_tcu_disable_regs(hw);
+
+	return 0;
+}
+
+static const struct clk_ops ingenic_tcu_clk_ops = {
+	.get_parent	= ingenic_tcu_get_parent,
+	.set_parent	= ingenic_tcu_set_parent,
+
+	.recalc_rate	= ingenic_tcu_recalc_rate,
+	.round_rate	= ingenic_tcu_round_rate,
+	.set_rate	= ingenic_tcu_set_rate,
+
+	.enable		= ingenic_tcu_enable,
+	.disable	= ingenic_tcu_disable,
+	.is_enabled	= ingenic_tcu_is_enabled,
+};
+
+static const char * const ingenic_tcu_timer_parents[] = {
+	[TCU_PARENT_PCLK] = "pclk",
+	[TCU_PARENT_RTC]  = "rtc",
+	[TCU_PARENT_EXT]  = "ext",
+};
+
+#define DEF_TIMER(_name, _gate_bit, _tcsr)				\
+	{								\
+		.init_data = {						\
+			.name = _name,					\
+			.parent_names = ingenic_tcu_timer_parents,	\
+			.num_parents = ARRAY_SIZE(ingenic_tcu_timer_parents),\
+			.ops = &ingenic_tcu_clk_ops,			\
+			.flags = CLK_SET_RATE_UNGATE,			\
+		},							\
+		.gate_bit = _gate_bit,					\
+		.tcsr_reg = _tcsr,					\
+	}
+static const struct ingenic_tcu_clk_info ingenic_tcu_clk_info[] = {
+	[TCU_CLK_TIMER0] = DEF_TIMER("timer0", 0, TCU_REG_TCSRc(0)),
+	[TCU_CLK_TIMER1] = DEF_TIMER("timer1", 1, TCU_REG_TCSRc(1)),
+	[TCU_CLK_TIMER2] = DEF_TIMER("timer2", 2, TCU_REG_TCSRc(2)),
+	[TCU_CLK_TIMER3] = DEF_TIMER("timer3", 3, TCU_REG_TCSRc(3)),
+	[TCU_CLK_TIMER4] = DEF_TIMER("timer4", 4, TCU_REG_TCSRc(4)),
+	[TCU_CLK_TIMER5] = DEF_TIMER("timer5", 5, TCU_REG_TCSRc(5)),
+	[TCU_CLK_TIMER6] = DEF_TIMER("timer6", 6, TCU_REG_TCSRc(6)),
+	[TCU_CLK_TIMER7] = DEF_TIMER("timer7", 7, TCU_REG_TCSRc(7)),
+};
+
+static const struct ingenic_tcu_clk_info ingenic_tcu_watchdog_clk_info =
+					 DEF_TIMER("wdt", 16, TCU_REG_WDT_TCSR);
+static const struct ingenic_tcu_clk_info ingenic_tcu_ost_clk_info =
+					 DEF_TIMER("ost", 15, TCU_REG_OST_TCSR);
+#undef DEF_TIMER
+
+static int __init ingenic_tcu_register_clock(struct ingenic_tcu *tcu,
+			unsigned int idx, enum tcu_clk_parent parent,
+			const struct ingenic_tcu_clk_info *info,
+			struct clk_hw_onecell_data *clocks)
+{
+	struct ingenic_tcu_clk *tcu_clk;
+	int err;
+
+	tcu_clk = kzalloc(sizeof(*tcu_clk), GFP_KERNEL);
+	if (!tcu_clk)
+		return -ENOMEM;
+
+	tcu_clk->hw.init = &info->init_data;
+	tcu_clk->idx = idx;
+	tcu_clk->info = info;
+	tcu_clk->tcu = tcu;
+
+	/* Reset channel and clock divider, set default parent */
+	ingenic_tcu_enable_regs(&tcu_clk->hw);
+	regmap_update_bits(tcu->map, info->tcsr_reg, 0xffff, BIT(parent));
+	ingenic_tcu_disable_regs(&tcu_clk->hw);
+
+	err = clk_hw_register(NULL, &tcu_clk->hw);
+	if (err) {
+		kfree(tcu_clk);
+		return err;
+	}
+
+	clocks->hws[idx] = &tcu_clk->hw;
+
+	return 0;
+}
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+	.num_channels = 8,
+	.has_ost = false,
+	.has_tcu_clk = true,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+	.num_channels = 6,
+	.has_ost = true,
+	.has_tcu_clk = true,
+};
+
+static const struct ingenic_soc_info jz4770_soc_info = {
+	.num_channels = 8,
+	.has_ost = true,
+	.has_tcu_clk = false,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] __initconst = {
+	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4770_soc_info, },
+	{ /* sentinel */ }
+};
+
+static int __init ingenic_tcu_probe(struct device_node *np)
+{
+	const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
+	struct ingenic_tcu *tcu;
+	struct regmap *map;
+	unsigned int i;
+	int ret;
+
+	map = device_node_to_regmap(np);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = map;
+	tcu->soc_info = id->data;
+
+	if (tcu->soc_info->has_tcu_clk) {
+		tcu->clk = of_clk_get_by_name(np, "tcu");
+		if (IS_ERR(tcu->clk)) {
+			ret = PTR_ERR(tcu->clk);
+			pr_crit("Cannot get TCU clock\n");
+			goto err_free_tcu;
+		}
+
+		ret = clk_prepare_enable(tcu->clk);
+		if (ret) {
+			pr_crit("Unable to enable TCU clock\n");
+			goto err_put_clk;
+		}
+	}
+
+	tcu->clocks = kzalloc(sizeof(*tcu->clocks) +
+			      sizeof(*tcu->clocks->hws) * TCU_CLK_COUNT,
+			      GFP_KERNEL);
+	if (!tcu->clocks) {
+		ret = -ENOMEM;
+		goto err_clk_disable;
+	}
+
+	tcu->clocks->num = TCU_CLK_COUNT;
+
+	for (i = 0; i < tcu->soc_info->num_channels; i++) {
+		ret = ingenic_tcu_register_clock(tcu, i, TCU_PARENT_EXT,
+						 &ingenic_tcu_clk_info[i],
+						 tcu->clocks);
+		if (ret) {
+			pr_crit("cannot register clock %d\n", i);
+			goto err_unregister_timer_clocks;
+		}
+	}
+
+	/*
+	 * We set EXT as the default parent clock for all the TCU clocks
+	 * except for the watchdog one, where we set the RTC clock as the
+	 * parent. Since the EXT and PCLK are much faster than the RTC clock,
+	 * the watchdog would kick after a maximum time of 5s, and we might
+	 * want a slower kicking time.
+	 */
+	ret = ingenic_tcu_register_clock(tcu, TCU_CLK_WDT, TCU_PARENT_RTC,
+					 &ingenic_tcu_watchdog_clk_info,
+					 tcu->clocks);
+	if (ret) {
+		pr_crit("cannot register watchdog clock\n");
+		goto err_unregister_timer_clocks;
+	}
+
+	if (tcu->soc_info->has_ost) {
+		ret = ingenic_tcu_register_clock(tcu, TCU_CLK_OST,
+						 TCU_PARENT_EXT,
+						 &ingenic_tcu_ost_clk_info,
+						 tcu->clocks);
+		if (ret) {
+			pr_crit("cannot register ost clock\n");
+			goto err_unregister_watchdog_clock;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, tcu->clocks);
+	if (ret) {
+		pr_crit("cannot add OF clock provider\n");
+		goto err_unregister_ost_clock;
+	}
+
+	ingenic_tcu = tcu;
+
+	return 0;
+
+err_unregister_ost_clock:
+	if (tcu->soc_info->has_ost)
+		clk_hw_unregister(tcu->clocks->hws[i + 1]);
+err_unregister_watchdog_clock:
+	clk_hw_unregister(tcu->clocks->hws[i]);
+err_unregister_timer_clocks:
+	for (i = 0; i < tcu->clocks->num; i++)
+		if (tcu->clocks->hws[i])
+			clk_hw_unregister(tcu->clocks->hws[i]);
+	kfree(tcu->clocks);
+err_clk_disable:
+	if (tcu->soc_info->has_tcu_clk)
+		clk_disable_unprepare(tcu->clk);
+err_put_clk:
+	if (tcu->soc_info->has_tcu_clk)
+		clk_put(tcu->clk);
+err_free_tcu:
+	kfree(tcu);
+	return ret;
+}
+
+static int __maybe_unused tcu_pm_suspend(void)
+{
+	struct ingenic_tcu *tcu = ingenic_tcu;
+
+	if (tcu->clk)
+		clk_disable(tcu->clk);
+
+	return 0;
+}
+
+static void __maybe_unused tcu_pm_resume(void)
+{
+	struct ingenic_tcu *tcu = ingenic_tcu;
+
+	if (tcu->clk)
+		clk_enable(tcu->clk);
+}
+
+static struct syscore_ops __maybe_unused tcu_pm_ops = {
+	.suspend = tcu_pm_suspend,
+	.resume = tcu_pm_resume,
+};
+
+static void __init ingenic_tcu_init(struct device_node *np)
+{
+	int ret = ingenic_tcu_probe(np);
+
+	if (ret)
+		pr_crit("Failed to initialize TCU clocks: %d\n", ret);
+
+	if (IS_ENABLED(CONFIG_PM_SLEEP))
+		register_syscore_ops(&tcu_pm_ops);
+}
+
+CLK_OF_DECLARE_DRIVER(jz4740_cgu, "ingenic,jz4740-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE_DRIVER(jz4725b_cgu, "ingenic,jz4725b-tcu", ingenic_tcu_init);
+CLK_OF_DECLARE_DRIVER(jz4770_cgu, "ingenic,jz4770-tcu", ingenic_tcu_init);

drivers/clocksource/Kconfig

@@ -685,4 +685,15 @@ config MILBEAUT_TIMER
 	help
 	  Enables the support for Milbeaut timer driver.
 
+config INGENIC_TIMER
+	bool "Clocksource/timer using the TCU in Ingenic JZ SoCs"
+	default MACH_INGENIC
+	depends on MIPS || COMPILE_TEST
+	depends on COMMON_CLK
+	select MFD_SYSCON
+	select TIMER_OF
+	select IRQ_DOMAIN
+	help
+	  Support for the timer/counter unit of the Ingenic JZ SoCs.
+
 endmenu

drivers/clocksource/Makefile

@@ -80,6 +80,7 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
 obj-$(CONFIG_ATCPIT100_TIMER)		+= timer-atcpit100.o

drivers/clocksource/ingenic-timer.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+
+#include <dt-bindings/clock/ingenic,tcu.h>
+
+struct ingenic_soc_info {
+	unsigned int num_channels;
+};
+
+struct ingenic_tcu {
+	struct regmap *map;
+	struct clk *timer_clk, *cs_clk;
+	unsigned int timer_channel, cs_channel;
+	struct clock_event_device cevt;
+	struct clocksource cs;
+	char name[4];
+	unsigned long pwm_channels_mask;
+};
+
+static struct ingenic_tcu *ingenic_tcu;
+
+static u64 notrace ingenic_tcu_timer_read(void)
+{
+	struct ingenic_tcu *tcu = ingenic_tcu;
+	unsigned int count;
+
+	regmap_read(tcu->map, TCU_REG_TCNTc(tcu->cs_channel), &count);
+
+	return count;
+}
+
+static u64 notrace ingenic_tcu_timer_cs_read(struct clocksource *cs)
+{
+	return ingenic_tcu_timer_read();
+}
+
+static inline struct ingenic_tcu *to_ingenic_tcu(struct clock_event_device *evt)
+{
+	return container_of(evt, struct ingenic_tcu, cevt);
+}
+
+static int ingenic_tcu_cevt_set_state_shutdown(struct clock_event_device *evt)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+
+	return 0;
+}
+
+static int ingenic_tcu_cevt_set_next(unsigned long next,
+				     struct clock_event_device *evt)
+{
+	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+
+	if (next > 0xffff)
+		return -EINVAL;
+
+	regmap_write(tcu->map, TCU_REG_TDFRc(tcu->timer_channel), next);
+	regmap_write(tcu->map, TCU_REG_TCNTc(tcu->timer_channel), 0);
+	regmap_write(tcu->map, TCU_REG_TESR, BIT(tcu->timer_channel));
+
+	return 0;
+}
+
+static irqreturn_t ingenic_tcu_cevt_cb(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	struct ingenic_tcu *tcu = to_ingenic_tcu(evt);
+
+	regmap_write(tcu->map, TCU_REG_TECR, BIT(tcu->timer_channel));
+
+	if (evt->event_handler)
+		evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct clk * __init ingenic_tcu_get_clock(struct device_node *np, int id)
+{
+	struct of_phandle_args args;
+
+	args.np = np;
+	args.args_count = 1;
+	args.args[0] = id;
+
+	return of_clk_get_from_provider(&args);
+}
+
+static int __init ingenic_tcu_timer_init(struct device_node *np,
+					 struct ingenic_tcu *tcu)
+{
+	unsigned int timer_virq, channel = tcu->timer_channel;
+	struct irq_domain *domain;
+	unsigned long rate;
+	int err;
+
+	tcu->timer_clk = ingenic_tcu_get_clock(np, channel);
+	if (IS_ERR(tcu->timer_clk))
+		return PTR_ERR(tcu->timer_clk);
+
+	err = clk_prepare_enable(tcu->timer_clk);
+	if (err)
+		goto err_clk_put;
+
+	rate = clk_get_rate(tcu->timer_clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	domain = irq_find_host(np);
+	if (!domain) {
+		err = -ENODEV;
+		goto err_clk_disable;
+	}
+
+	timer_virq = irq_create_mapping(domain, channel);
+	if (!timer_virq) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	snprintf(tcu->name, sizeof(tcu->name), "TCU");
+
+	err = request_irq(timer_virq, ingenic_tcu_cevt_cb, IRQF_TIMER,
+			  tcu->name, &tcu->cevt);
+	if (err)
+		goto err_irq_dispose_mapping;
+
+	tcu->cevt.cpumask = cpumask_of(smp_processor_id());
+	tcu->cevt.features = CLOCK_EVT_FEAT_ONESHOT;
+	tcu->cevt.name = tcu->name;
+	tcu->cevt.rating = 200;
+	tcu->cevt.set_state_shutdown = ingenic_tcu_cevt_set_state_shutdown;
+	tcu->cevt.set_next_event = ingenic_tcu_cevt_set_next;
+
+	clockevents_config_and_register(&tcu->cevt, rate, 10, 0xffff);
+
+	return 0;
+
+err_irq_dispose_mapping:
+	irq_dispose_mapping(timer_virq);
+err_clk_disable:
+	clk_disable_unprepare(tcu->timer_clk);
+err_clk_put:
+	clk_put(tcu->timer_clk);
+	return err;
+}
+
+static int __init ingenic_tcu_clocksource_init(struct device_node *np,
+					       struct ingenic_tcu *tcu)
+{
+	unsigned int channel = tcu->cs_channel;
+	struct clocksource *cs = &tcu->cs;
+	unsigned long rate;
+	int err;
+
+	tcu->cs_clk = ingenic_tcu_get_clock(np, channel);
+	if (IS_ERR(tcu->cs_clk))
+		return PTR_ERR(tcu->cs_clk);
+
+	err = clk_prepare_enable(tcu->cs_clk);
+	if (err)
+		goto err_clk_put;
+
+	rate = clk_get_rate(tcu->cs_clk);
+	if (!rate) {
+		err = -EINVAL;
+		goto err_clk_disable;
+	}
+
+	/* Reset channel */
+	regmap_update_bits(tcu->map, TCU_REG_TCSRc(channel),
+			   0xffff & ~TCU_TCSR_RESERVED_BITS, 0);
+
+	/* Reset counter */
+	regmap_write(tcu->map, TCU_REG_TDFRc(channel), 0xffff);
+	regmap_write(tcu->map, TCU_REG_TCNTc(channel), 0);
+
+	/* Enable channel */
+	regmap_write(tcu->map, TCU_REG_TESR, BIT(channel));
+
+	cs->name = "ingenic-timer";
+	cs->rating = 200;
+	cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
+	cs->mask = CLOCKSOURCE_MASK(16);
+	cs->read = ingenic_tcu_timer_cs_read;
+
+	err = clocksource_register_hz(cs, rate);
+	if (err)
+		goto err_clk_disable;
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(tcu->cs_clk);
+err_clk_put:
+	clk_put(tcu->cs_clk);
+	return err;
+}
+
+static const struct ingenic_soc_info jz4740_soc_info = {
+	.num_channels = 8,
+};
+
+static const struct ingenic_soc_info jz4725b_soc_info = {
+	.num_channels = 6,
+};
+
+static const struct of_device_id ingenic_tcu_of_match[] = {
+	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
+	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
+	{ /* sentinel */ }
+};
+
+static int __init ingenic_tcu_init(struct device_node *np)
+{
+	const struct of_device_id *id = of_match_node(ingenic_tcu_of_match, np);
+	const struct ingenic_soc_info *soc_info = id->data;
+	struct ingenic_tcu *tcu;
+	struct regmap *map;
+	long rate;
+	int ret;
+
+	of_node_clear_flag(np, OF_POPULATED);
+
+	map = device_node_to_regmap(np);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	/* Enable all TCU channels for PWM use by default except channels 0/1 */
+	tcu->pwm_channels_mask = GENMASK(soc_info->num_channels - 1, 2);
+	of_property_read_u32(np, "ingenic,pwm-channels-mask",
+			     (u32 *)&tcu->pwm_channels_mask);
+
+	/* Verify that we have at least two free channels */
+	if (hweight8(tcu->pwm_channels_mask) > soc_info->num_channels - 2) {
+		pr_crit("%s: Invalid PWM channel mask: 0x%02lx\n", __func__,
+			tcu->pwm_channels_mask);
+		ret = -EINVAL;
+		goto err_free_ingenic_tcu;
+	}
+
+	tcu->map = map;
+	ingenic_tcu = tcu;
+
+	tcu->timer_channel = find_first_zero_bit(&tcu->pwm_channels_mask,
+						 soc_info->num_channels);
+	tcu->cs_channel = find_next_zero_bit(&tcu->pwm_channels_mask,
+					     soc_info->num_channels,
+					     tcu->timer_channel + 1);
+
+	ret = ingenic_tcu_clocksource_init(np, tcu);
+	if (ret) {
+		pr_crit("%s: Unable to init clocksource: %d\n", __func__, ret);
+		goto err_free_ingenic_tcu;
+	}
+
+	ret = ingenic_tcu_timer_init(np, tcu);
+	if (ret)
+		goto err_tcu_clocksource_cleanup;
+
+	/* Register the sched_clock at the end as there's no way to undo it */
+	rate = clk_get_rate(tcu->cs_clk);
+	sched_clock_register(ingenic_tcu_timer_read, 16, rate);
+
+	return 0;
+
+err_tcu_clocksource_cleanup:
+	clocksource_unregister(&tcu->cs);
+	clk_disable_unprepare(tcu->cs_clk);
+	clk_put(tcu->cs_clk);
+err_free_ingenic_tcu:
+	kfree(tcu);
+	return ret;
+}
+
+TIMER_OF_DECLARE(jz4740_tcu_intc,  "ingenic,jz4740-tcu",  ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init);
+TIMER_OF_DECLARE(jz4770_tcu_intc,  "ingenic,jz4770-tcu",  ingenic_tcu_init);
+
+
+static int __init ingenic_tcu_probe(struct platform_device *pdev)
+{
+	platform_set_drvdata(pdev, ingenic_tcu);
+
+	return 0;
+}
+
+static int __maybe_unused ingenic_tcu_suspend(struct device *dev)
+{
+	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+
+	clk_disable(tcu->cs_clk);
+	clk_disable(tcu->timer_clk);
+	return 0;
+}
+
+static int __maybe_unused ingenic_tcu_resume(struct device *dev)
+{
+	struct ingenic_tcu *tcu = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_enable(tcu->timer_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_enable(tcu->cs_clk);
+	if (ret) {
+		clk_disable(tcu->timer_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops __maybe_unused ingenic_tcu_pm_ops = {
+	/* _noirq: We want the TCU clocks to be gated last / ungated first */
+	.suspend_noirq = ingenic_tcu_suspend,
+	.resume_noirq  = ingenic_tcu_resume,
+};
+
+static struct platform_driver ingenic_tcu_driver = {
+	.driver = {
+		.name	= "ingenic-tcu-timer",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &ingenic_tcu_pm_ops,
+#endif
+		.of_match_table = ingenic_tcu_of_match,
+	},
+};
+builtin_platform_driver_probe(ingenic_tcu_driver, ingenic_tcu_probe);

drivers/irqchip/Kconfig

@@ -315,6 +315,17 @@ config INGENIC_IRQ
 	depends on MACH_INGENIC
 	default y
 
+config INGENIC_TCU_IRQ
+	bool "Ingenic JZ47xx TCU interrupt controller"
+	default MACH_INGENIC
+	depends on MIPS || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  Support for interrupts in the Timer/Counter Unit (TCU) of the Ingenic
+	  JZ47xx SoCs.
+
+	  If unsure, say N.
+
 config RENESAS_H8300H_INTC
         bool
 	select IRQ_DOMAIN

drivers/irqchip/Makefile

@@ -75,6 +75,7 @@ obj-$(CONFIG_RENESAS_H8300H_INTC)	+= irq-renesas-h8300h.o
 obj-$(CONFIG_RENESAS_H8S_INTC)		+= irq-renesas-h8s.o
 obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o
 obj-$(CONFIG_INGENIC_IRQ)		+= irq-ingenic.o
+obj-$(CONFIG_INGENIC_TCU_IRQ)		+= irq-ingenic-tcu.o
 obj-$(CONFIG_IMX_GPCV2)			+= irq-imx-gpcv2.o
 obj-$(CONFIG_PIC32_EVIC)		+= irq-pic32-evic.o
 obj-$(CONFIG_MSCC_OCELOT_IRQ)		+= irq-mscc-ocelot.o

drivers/irqchip/irq-ingenic-tcu.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU IRQ driver
+ * Copyright (C) 2019 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+
+struct ingenic_tcu {
+	struct regmap *map;
+	struct clk *clk;
+	struct irq_domain *domain;
+	unsigned int nb_parent_irqs;
+	u32 parent_irqs[3];
+};
+
+static void ingenic_tcu_intc_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *irq_chip = irq_data_get_irq_chip(&desc->irq_data);
+	struct irq_domain *domain = irq_desc_get_handler_data(desc);
+	struct irq_chip_generic *gc = irq_get_domain_generic_chip(domain, 0);
+	struct regmap *map = gc->private;
+	uint32_t irq_reg, irq_mask;
+	unsigned int i;
+
+	regmap_read(map, TCU_REG_TFR, &irq_reg);
+	regmap_read(map, TCU_REG_TMR, &irq_mask);
+
+	chained_irq_enter(irq_chip, desc);
+
+	irq_reg &= ~irq_mask;
+
+	for_each_set_bit(i, (unsigned long *)&irq_reg, 32)
+		generic_handle_irq(irq_linear_revmap(domain, i));
+
+	chained_irq_exit(irq_chip, desc);
+}
+
+static void ingenic_tcu_gc_unmask_enable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.enable, mask);
+	*ct->mask_cache |= mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.disable, mask);
+	*ct->mask_cache &= ~mask;
+	irq_gc_unlock(gc);
+}
+
+static void ingenic_tcu_gc_mask_disable_reg_and_ack(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct irq_chip_type *ct = irq_data_get_chip_type(d);
+	struct regmap *map = gc->private;
+	u32 mask = d->mask;
+
+	irq_gc_lock(gc);
+	regmap_write(map, ct->regs.ack, mask);
+	regmap_write(map, ct->regs.disable, mask);
+	irq_gc_unlock(gc);
+}
+
+static int __init ingenic_tcu_irq_init(struct device_node *np,
+				       struct device_node *parent)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	struct ingenic_tcu *tcu;
+	struct regmap *map;
+	unsigned int i;
+	int ret, irqs;
+
+	map = device_node_to_regmap(np);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	tcu = kzalloc(sizeof(*tcu), GFP_KERNEL);
+	if (!tcu)
+		return -ENOMEM;
+
+	tcu->map = map;
+
+	irqs = of_property_count_elems_of_size(np, "interrupts", sizeof(u32));
+	if (irqs < 0 || irqs > ARRAY_SIZE(tcu->parent_irqs)) {
+		pr_crit("%s: Invalid 'interrupts' property\n", __func__);
+		ret = -EINVAL;
+		goto err_free_tcu;
+	}
+
+	tcu->nb_parent_irqs = irqs;
+
+	tcu->domain = irq_domain_add_linear(np, 32, &irq_generic_chip_ops,
+					    NULL);
+	if (!tcu->domain) {
+		ret = -ENOMEM;
+		goto err_free_tcu;
+	}
+
+	ret = irq_alloc_domain_generic_chips(tcu->domain, 32, 1, "TCU",
+					     handle_level_irq, 0,
+					     IRQ_NOPROBE | IRQ_LEVEL, 0);
+	if (ret) {
+		pr_crit("%s: Invalid 'interrupts' property\n", __func__);
+		goto out_domain_remove;
+	}
+
+	gc = irq_get_domain_generic_chip(tcu->domain, 0);
+	ct = gc->chip_types;
+
+	gc->wake_enabled = IRQ_MSK(32);
+	gc->private = tcu->map;
+
+	ct->regs.disable = TCU_REG_TMSR;
+	ct->regs.enable = TCU_REG_TMCR;
+	ct->regs.ack = TCU_REG_TFCR;
+	ct->chip.irq_unmask = ingenic_tcu_gc_unmask_enable_reg;
+	ct->chip.irq_mask = ingenic_tcu_gc_mask_disable_reg;
+	ct->chip.irq_mask_ack = ingenic_tcu_gc_mask_disable_reg_and_ack;
+	ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
+
+	/* Mask all IRQs by default */
+	regmap_write(tcu->map, TCU_REG_TMSR, IRQ_MSK(32));
+
+	/*
+	 * On JZ4740, timer 0 and timer 1 have their own interrupt line;
+	 * timers 2-7 share one interrupt.
+	 * On SoCs >= JZ4770, timer 5 has its own interrupt line;
+	 * timers 0-4 and 6-7 share one single interrupt.
+	 *
+	 * To keep things simple, we just register the same handler to
+	 * all parent interrupts. The handler will properly detect which
+	 * channel fired the interrupt.
+	 */
+	for (i = 0; i < irqs; i++) {
+		tcu->parent_irqs[i] = irq_of_parse_and_map(np, i);
+		if (!tcu->parent_irqs[i]) {
+			ret = -EINVAL;
+			goto out_unmap_irqs;
+		}
+
+		irq_set_chained_handler_and_data(tcu->parent_irqs[i],
+						 ingenic_tcu_intc_cascade,
+						 tcu->domain);
+	}
+
+	return 0;
+
+out_unmap_irqs:
+	for (; i > 0; i--)
+		irq_dispose_mapping(tcu->parent_irqs[i - 1]);
+out_domain_remove:
+	irq_domain_remove(tcu->domain);
+err_free_tcu:
+	kfree(tcu);
+	return ret;
+}
+IRQCHIP_DECLARE(jz4740_tcu_irq, "ingenic,jz4740-tcu", ingenic_tcu_irq_init);
+IRQCHIP_DECLARE(jz4725b_tcu_irq, "ingenic,jz4725b-tcu", ingenic_tcu_irq_init);
+IRQCHIP_DECLARE(jz4770_tcu_irq, "ingenic,jz4770-tcu", ingenic_tcu_irq_init);

drivers/mfd/syscon.c

@@ -40,7 +40,7 @@ static const struct regmap_config syscon_regmap_config = {
 	.reg_stride = 4,
 };
 
-static struct syscon *of_syscon_register(struct device_node *np)
+static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 {
 	struct clk *clk;
 	struct syscon *syscon;
@@ -51,9 +51,6 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	struct regmap_config syscon_config = syscon_regmap_config;
 	struct resource res;
 
-	if (!of_device_is_compatible(np, "syscon"))
-		return ERR_PTR(-EINVAL);
-
 	syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
 	if (!syscon)
 		return ERR_PTR(-ENOMEM);
@@ -117,6 +114,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
 		goto err_regmap;
 	}
 
+	if (check_clk) {
 		clk = of_clk_get(np, 0);
 		if (IS_ERR(clk)) {
 			ret = PTR_ERR(clk);
@@ -128,6 +126,7 @@ static struct syscon *of_syscon_register(struct device_node *np)
 			if (ret)
 				goto err_attach;
 		}
+	}
 
 	syscon->regmap = regmap;
 	syscon->np = np;
@@ -150,7 +149,8 @@ static struct syscon *of_syscon_register(struct device_node *np)
 	return ERR_PTR(ret);
 }
 
-struct regmap *syscon_node_to_regmap(struct device_node *np)
+static struct regmap *device_node_get_regmap(struct device_node *np,
+					     bool check_clk)
 {
 	struct syscon *entry, *syscon = NULL;
 
@@ -165,13 +165,27 @@ struct regmap *syscon_node_to_regmap(struct device_node *np)
 	spin_unlock(&syscon_list_slock);
 
 	if (!syscon)
-		syscon = of_syscon_register(np);
+		syscon = of_syscon_register(np, check_clk);
 
 	if (IS_ERR(syscon))
 		return ERR_CAST(syscon);
 
 	return syscon->regmap;
 }
+
+struct regmap *device_node_to_regmap(struct device_node *np)
+{
+	return device_node_get_regmap(np, false);
+}
+EXPORT_SYMBOL_GPL(device_node_to_regmap);
+
+struct regmap *syscon_node_to_regmap(struct device_node *np)
+{
+	if (!of_device_is_compatible(np, "syscon"))
+		return ERR_PTR(-EINVAL);
+
+	return device_node_get_regmap(np, true);
+}
 EXPORT_SYMBOL_GPL(syscon_node_to_regmap);
 
 struct regmap *syscon_regmap_lookup_by_compatible(const char *s)

include/dt-bindings/clock/ingenic,tcu.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,tcu DT binding.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+#define __DT_BINDINGS_CLOCK_INGENIC_TCU_H__
+
+#define TCU_CLK_TIMER0	0
+#define TCU_CLK_TIMER1	1
+#define TCU_CLK_TIMER2	2
+#define TCU_CLK_TIMER3	3
+#define TCU_CLK_TIMER4	4
+#define TCU_CLK_TIMER5	5
+#define TCU_CLK_TIMER6	6
+#define TCU_CLK_TIMER7	7
+#define TCU_CLK_WDT	8
+#define TCU_CLK_OST	9
+
+#endif /* __DT_BINDINGS_CLOCK_INGENIC_TCU_H__ */

include/dt-bindings/clock/jz4740-cgu.h

@@ -34,5 +34,6 @@
 #define JZ4740_CLK_ADC		19
 #define JZ4740_CLK_I2C		20
 #define JZ4740_CLK_AIC		21
+#define JZ4740_CLK_TCU		22
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4740_CGU_H__ */

include/linux/mfd/syscon.h

@@ -17,12 +17,18 @@
 struct device_node;
 
 #ifdef CONFIG_MFD_SYSCON
+extern struct regmap *device_node_to_regmap(struct device_node *np);
 extern struct regmap *syscon_node_to_regmap(struct device_node *np);
 extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
 extern struct regmap *syscon_regmap_lookup_by_phandle(
 					struct device_node *np,
 					const char *property);
 #else
+static inline struct regmap *device_node_to_regmap(struct device_node *np)
+{
+	return ERR_PTR(-ENOTSUPP);
+}
+
 static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
 {
 	return ERR_PTR(-ENOTSUPP);