spi: ath79: Enable support for compile test

To allow building this driver in compile test we need to remove all
dependency on headers from arch/mips/include. To allow this we
explicitly define all the registers locally instead of using
ar71xx_regs.h and we move the platform data struct definition to
include/linux/platform_data/spi-ath79.h.
Signed-off-by: Alban Bedel <albeu@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>

arch/mips/ath79/dev-spi.h

@@ -13,7 +13,7 @@
 #define _ATH79_DEV_SPI_H
 
 #include <linux/spi/spi.h>
-#include <asm/mach-ath79/ath79_spi_platform.h>
+#include <linux/platform_data/spi-ath79.h>
 
 void ath79_register_spi(struct ath79_spi_platform_data *pdata,
 			 struct spi_board_info const *info,

drivers/spi/Kconfig

@@ -63,7 +63,7 @@ config SPI_ALTERA
 
 config SPI_ATH79
 	tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
-	depends on ATH79
+	depends on ATH79 || COMPILE_TEST
 	select SPI_BITBANG
 	help
 	  This enables support for the SPI controller present on the

drivers/spi/spi-ath79.c

@@ -23,15 +23,24 @@
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79_spi_platform.h>
+#include <linux/platform_data/spi-ath79.h>
 
 #define DRV_NAME	"ath79-spi"
 
 #define ATH79_SPI_RRW_DELAY_FACTOR	12000
 #define MHZ				(1000 * 1000)
 
+#define AR71XX_SPI_REG_FS		0x00	/* Function Select */
+#define AR71XX_SPI_REG_CTRL		0x04	/* SPI Control */
+#define AR71XX_SPI_REG_IOC		0x08	/* SPI I/O Control */
+#define AR71XX_SPI_REG_RDS		0x0c	/* Read Data Shift */
+
+#define AR71XX_SPI_FS_GPIO		BIT(0)	/* Enable GPIO mode */
+
+#define AR71XX_SPI_IOC_DO		BIT(0)	/* Data Out pin */
+#define AR71XX_SPI_IOC_CLK		BIT(8)	/* CLK pin */
+#define AR71XX_SPI_IOC_CS(n)		BIT(16 + (n))
+
 struct ath79_spi {
 	struct spi_bitbang	bitbang;
 	u32			ioc_base;