[POWERPC] 83xx: configure USB clock for MPC8315E

SCCR USB bits are in a different location on the mpc8315.
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8315erdb.dts

@@ -96,7 +96,7 @@ immr@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		compatible = "simple-bus";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
 		ranges = <0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;

arch/powerpc/platforms/83xx/mpc83xx.h

@@ -14,6 +14,8 @@
 #define MPC83XX_SCCR_USB_DRCM_11   0x00300000
 #define MPC83XX_SCCR_USB_DRCM_01   0x00100000
 #define MPC83XX_SCCR_USB_DRCM_10   0x00200000
+#define MPC8315_SCCR_USB_MASK      0x00c00000
+#define MPC8315_SCCR_USB_DRCM_11   0x00c00000
 #define MPC837X_SCCR_USB_DRCM_11   0x00c00000
 
 /* system i/o configuration register low */

arch/powerpc/platforms/83xx/usb.c

@@ -104,6 +104,7 @@ int mpc831x_usb_cfg(void)
 	u32 temp;
 	void __iomem *immap, *usb_regs;
 	struct device_node *np = NULL;
+	struct device_node *immr_node = NULL;
 	const void *prop;
 	struct resource res;
 	int ret = 0;
@@ -124,10 +125,15 @@ int mpc831x_usb_cfg(void)
 	}
 
 	/* Configure clock */
-	temp = in_be32(immap + MPC83XX_SCCR_OFFS);
-	temp &= ~MPC83XX_SCCR_USB_MASK;
-	temp |= MPC83XX_SCCR_USB_DRCM_11;  /* 1:3 */
-	out_be32(immap + MPC83XX_SCCR_OFFS, temp);
+	immr_node = of_get_parent(np);
+	if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+		                MPC8315_SCCR_USB_MASK,
+		                MPC8315_SCCR_USB_DRCM_11);
+	else
+		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
+		                MPC83XX_SCCR_USB_MASK,
+		                MPC83XX_SCCR_USB_DRCM_11);
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 	if (prop && !strcmp(prop, "ulpi")) {
@@ -144,6 +150,9 @@ int mpc831x_usb_cfg(void)
 
 	iounmap(immap);
 
+	if (immr_node)
+		of_node_put(immr_node);
+
 	/* Map USB SOC space */
 	ret = of_address_to_resource(np, 0, &res);
 	if (ret) {