- 27 Sep, 2016 6 commits
-
-
Florian Fainelli authored
This reverts commit 62469c76 ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb4 ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76 we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by:
Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Philippe Reynes authored
This reverts commit 6b352ebc ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings"). We needs to revert the commit 62469c76 ("net: ethernet: bcmgenet: use phydev from struct net_device"), because this commit add a regression. As the commit 6b352ebc ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend on the first one, we also need to revert it first. Signed-off-by:
-
Mickaël Salaün authored
This prevent future potential pointer leaks when an unprivileged eBPF program will read a pointer value from its context. Even if is_valid_access() returns a pointer type, the eBPF verifier replace it with UNKNOWN_VALUE. The register value that contains a kernel address is then allowed to leak. Moreover, this fix allows unprivileged eBPF programs to use functions with (legitimate) pointer arguments. Not an issue currently since reg_type is only set for PTR_TO_PACKET or PTR_TO_PACKET_END in XDP and TC programs that can only be loaded as privileged. For now, the only unprivileged eBPF program allowed is for socket filtering and all the types from its context are UNKNOWN_VALUE. However, this fix is important for future unprivileged eBPF programs which could use pointers in their context. Signed-off-by:
Mickaël Salaün <mic@digikod.net> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Naveen N. Rao authored
seccomp_phase1() does not exist anymore. Instead, update sample to use __seccomp_filter(). While at it, set max locked memory to unlimited. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Naveen N. Rao authored
These samples fail to compile as 'struct flow_keys' conflicts with definition in net/flow_dissector.h. Fix the same by renaming the structure used in the sample. Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
- 26 Sep, 2016 15 commits
-
-
David S. Miller authored
Jason Baron says: ==================== bnx2x: page allocation failure While configuring ~500 multicast addrs, we ran into high order page allocation failures. They don't need to be high order, and thus I'm proposing to split them into at most PAGE_SIZE allocations. Below is a sample failure. [1201902.617882] bnx2x: [bnx2x_set_mc_list:12374(eth0)]Failed to create multicast MACs list: -12 [1207325.695021] kworker/1:0: page allocation failure: order:2, mode:0xc020 [1207325.702059] CPU: 1 PID: 15805 Comm: kworker/1:0 Tainted: G W [1207325.712940] Hardware name: SYNNEX CORPORATION 1x8-X4i SSD 10GE/S5512LE, BIOS V8.810 05/16/2013 [1207325.722284] Workqueue: events bnx2x_sp_rtnl_task [bnx2x] [1207325.728206] 0000000000000000 ffff88012d873a78 ffffffff8267f7c7 000000000000c020 [1207325.736754] 0000000000000000 ffff88012d873b08 ffffffff8212f8e0 fffffffc00000003 [1207325.745301] ffff88041ffecd80 ffff880400000030 0000000000000002 0000c0206800da13 [1207325.753846] Call Trace: [1207325.756789] [<ffffffff8267f7c7>] dump_stack+0x4d/0x63 [1207325.762426] [<ffffffff8212f8e0>] warn_alloc_failed+0xe0/0x130 [1207325.768756] [<ffffffff8213c898>] ? wakeup_kswapd+0x48/0x140 [1207325.774914] [<ffffffff82132afc>] __alloc_pages_nodemask+0x2bc/0x970 [1207325.781761] [<ffffffff82173691>] alloc_pages_current+0x91/0x100 [1207325.788260] [<ffffffff8212fa1e>] alloc_kmem_pages+0xe/0x10 [1207325.794329] [<ffffffff8214c9c8>] kmalloc_order+0x18/0x50 [1207325.800227] [<ffffffff8214ca26>] kmalloc_order_trace+0x26/0xb0 [1207325.806642] [<ffffffff82451c68>] ? _xfer_secondary_pool+0xa8/0x1a0 [1207325.813404] [<ffffffff8217cfda>] __kmalloc+0x19a/0x1b0 [1207325.819142] [<ffffffffa02fe975>] bnx2x_set_rx_mode_inner+0x3d5/0x590 [bnx2x] [1207325.827000] [<ffffffffa02ff52d>] bnx2x_sp_rtnl_task+0x28d/0x760 [bnx2x] [1207325.834197] [<ffffffff820695d4>] process_one_work+0x134/0x3c0 [1207325.840522] [<ffffffff82069981>] worker_thread+0x121/0x460 [1207325.846585] [<ffffffff82069860>] ? process_one_work+0x3c0/0x3c0 [1207325.853089] [<ffffffff8206f039>] kthread+0xc9/0xe0 [1207325.858459] [<ffffffff82070000>] ? notify_die+0x10/0x40 [1207325.864263] [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180 [1207325.871288] [<ffffffff826852d2>] ret_from_fork+0x42/0x70 [1207325.877183] [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180 v2: -make use of list_next_entry() -only use PAGE_SIZE allocations ==================== Signed-off-by: -
Jason Baron authored
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for the pending list to be done in PAGE_SIZE increments. Signed-off-by:
Jason Baron <jbaron@akamai.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Acked-by:
Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by:
-
Jason Baron authored
Currently, we can have high order page allocations that specify GFP_ATOMIC when configuring multicast MAC address filters. For example, we have seen order 2 page allocation failures with ~500 multicast addresses configured. Convert the allocation for 'mcast_list' to be done in PAGE_SIZE increments. Signed-off-by:
-
Arnd Bergmann authored
I stumbled over a new warning during randconfig testing, with CONFIG_BPF_SYSCALL disabled: drivers/net/ethernet/netronome/nfp/nfp_net_offload.c: In function 'nfp_net_bpf_offload': drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: '*((void *)&res+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: 'res.n_instr' may be used uninitialized in this function [-Werror=maybe-uninitialized] As far as I can tell, this is a false positive caused by the compiler getting confused about a function that is partially inlined, but it's easy to avoid while improving the code: The nfp_bpf_jit() stub helper for that configuration is unusual as it is defined in a header file but not marked 'static inline'. By moving the compile-time check into the caller using the IS_ENABLED() macro, we can remove that stub and simplify the nfp_net_bpf_offload_prepare() function enough to unconfuse the compiler. Fixes: 7533fdc0 ("nfp: bpf: add hardware bpf offload") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes] In fact, this function is implemented in drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called by no one, thus can be removed. So this patch removes the unused functions. Signed-off-by:
Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by:
-
Baoyou Xie authored
We get 10 warnings when building kernel with W=1: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes] drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes] In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by:
-
Baoyou Xie authored
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/marvell/mvneta.c:639:27: warning: no previous prototype for 'mvneta_get_stats64' [-Wmissing-prototypes] drivers/net/ethernet/marvell/mvneta.c:3529:5: warning: no previous prototype for 'mvneta_ethtool_set_link_ksettings' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by:
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/net/ethernet/hisilicon/hip04_eth.c:603:22: warning: no previous prototype for 'tx_done' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by:
-
Baoyou Xie authored
We get 2 warnings when building kernel with W=1: drivers/net/ethernet/hisilicon/hisi_femac.c:943:5: warning: no previous prototype for 'hisi_femac_drv_suspend' [-Wmissing-prototypes] drivers/net/ethernet/hisilicon/hisi_femac.c:960:5: warning: no previous prototype for 'hisi_femac_drv_resume' [-Wmissing-prototypes] In fact, these two functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-09-25 Here are a few more Bluetooth & 802.15.4 patches for the 4.9 kernel that have popped up during the past week: - New USB ID for QCA_ROME Bluetooth device - NULL pointer dereference fix for Bluetooth mgmt sockets - Fixes for BCSP driver - Fix for updating LE scan response Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/dsa/mv88e6xxx/chip.c:219:5: warning: symbol 'mv88e6xxx_port_read' was not declared. Should it be static? drivers/net/dsa/mv88e6xxx/chip.c:227:5: warning: symbol 'mv88e6xxx_port_write' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/ethernet/emulex/benet/be_main.c:47:25: warning: symbol 'be_err_recovery_workq' was not declared. Should it be static? drivers/net/ethernet/emulex/benet/be_main.c:63:25: warning: symbol 'be_wq' was not declared. Should it be static? Signed-off-by:
-
Robert Jarzmik authored
This aligns smc91x with its cousin, namely smc911x.c. This also allows the driver to run also in a device-tree based lubbock board build, on which it was tested. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Colin Ian King authored
iq is unsigned, so the error check for iq < 0 has no effect so errors can slip past this check. Fix this by making iq signed and also get_filter_steerq return a signed int so a -ve error can be returned. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, they are: 1) Consolidate GRE protocol tracker using new GRE protocol definitions, patches from Gao Feng. 2) Properly parse continuation lines in SIP helper, update allowed characters in Call-ID header and allow tabs in SIP headers as specified by RFC3261, from Marco Angaroni. 3) Remove useless code in FTP conntrack helper, also from Gao Feng. 4) Add number generation expression for nf_tables, with random and incremental generators. This also includes specific offset to add to the result, patches from Laura Garcia Liebana. Liping Zhang follows with a fix to avoid a race in this new expression. 5) Fix new quota expression inversion logic, added in the previous pull request. 6) Missing validation of queue configuration in nft_queue, patch from Liping Zhang. 7) Remove unused ctl_table_path, as part of the deprecation of the ip_conntrack sysctl interface coming in the previous batch. Again from Liping Zhang. 8) Add offset attribute to nft_hash expression, so we can generate any output from a specific base offset. Moreover, check for possible overflow, patches from Laura Garcia. 9) Allow to invert dynamic set insertion from packet path, to check for overflows in case the set is full. 10) Revisit nft_set_pktinfo*() logic from nf_tables to ensure proper initialization of layer 4 protocol. Consolidate pktinfo structure initialization for bridge and netdev families. 11) Do not inconditionally drop IPv6 packets that we cannot parse transport protocol for ip6 and inet families, let the user decide on this via ruleset policy. 12) Get rid of gotos in __nf_ct_try_assign_helper(). 13) Check for return value in register_netdevice_notifier() and nft_register_chain_type(), patches from Gao Feng. 14) Get rid of CONFIG_IP6_NF_IPTABLES dependency in nf_queue infrastructure that is common to nf_tables, from Liping Zhang. 15) Disable 'found' and 'searched' stats that are updates from the packet hotpath, not very useful these days. 16) Validate maximum value of u32 netlink attributes in nf_tables, this introduces nft_parse_u32_check(). From Laura Garcia. 17) Add missing code to integrate nft_queue with maps, patch from Liping Zhang. This also includes missing support ranges in nft_queue bridge family. 18) Fix check in nft_payload_fast_eval() that ensure that we don't go over the skbuff data boundary, from Liping Zhang. 19) Check if transport protocol is set from nf_tables tracing and payload expression. Again from Liping Zhang. 20) Use net_get_random_once() whenever possible, from Gao Feng. 21) Replace hardcoded value by sizeof() in xt_helper, from Gao Feng. 22) Remove superfluous check for found element in nft_lookup. 23) Simplify TCPMSS logic to check for minimum MTU, from Gao Feng. 24) Replace double linked list by single linked list in Netfilter core hook infrastructure, patchset from Aaron Conole. This includes several patches to prepare this update. 25) Fix wrong sequence adjustment of TCP RST with no ACK, from Gao Feng. 26) Relax check for direction attribute in nft_ct for layer 3 and 4 protocol fields, from Liping Zhang. 27) Add new revision for hashlimit to support higher pps of upto 1 million, from Vishwanath Pai. 28) Evict stale entries in nf_conntrack when reading entries from /proc/net/nf_conntrack, from Florian Westphal. 29) Fix transparent match for IPv6 request sockets, from Krisztian Kovacs. 30) Add new range expression for nf_tables. 31) Add missing code to support for flags in nft_log. Expose NF_LOG_* flags via uapi and use it from the generic logging infrastructure, instead of using xt specific definitions, from Liping Zhang. ==================== Signed-off-by:
-
- 25 Sep, 2016 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextPablo Neira Ayuso authored
Conflicts: net/netfilter/core.c net/netfilter/nf_tables_netdev.c Resolve two conflicts before pull request for David's net-next tree: 1) Between c73c2484 ("netfilter: nf_tables_netdev: remove redundant ip_hdr assignment") from the net tree and commit ddc8b602 ("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()"). 2) Between e8bffe0c ("net: Add _nf_(un)register_hooks symbols") and Aaron Conole's patches to replace list_head with single linked list. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Liping Zhang authored
nf_log is used by both nftables and iptables, so use XT_LOG_XXX macros here is not appropriate. Replace them with NF_LOG_XXX. Signed-off-by:
Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by:
-
Liping Zhang authored
NFTA_LOG_FLAGS attribute is already supported, but the related NF_LOG_XXX flags are not exposed to the userspace. So we cannot explicitly enable log flags to log uid, tcp sequence, ip options and so on, i.e. such rule "nft add rule filter output log uid" is not supported yet. So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In order to keep consistent with other modules, change NF_LOG_MASK to refer to all supported log flags. On the other hand, add a new NF_LOG_DEFAULT_MASK to refer to the original default log flags. Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the userspace. Signed-off-by:
-
Pablo Neira Ayuso authored
Inverse ranges != [a,b] are not currently possible because rules are composites of && operations, and we need to express this: data < a || data > b This patch adds a new range expression. Positive ranges can be already through two cmp expressions: cmp(sreg, data, >=) cmp(sreg, data, <=) This new range expression provides an alternative way to express this. Signed-off-by: -
KOVACS Krisztian authored
The introduction of TCP_NEW_SYN_RECV state, and the addition of request sockets to the ehash table seems to have broken the --transparent option of the socket match for IPv6 (around commit a9407000). Now that the socket lookup finds the TCP_NEW_SYN_RECV socket instead of the listener, the --transparent option tries to match on the no_srccheck flag of the request socket. Unfortunately, that flag was only set for IPv4 sockets in tcp_v4_init_req() by copying the transparent flag of the listener socket. This effectively causes '-m socket --transparent' not match on the ACK packet sent by the client in a TCP handshake. Based on the suggestion from Eric Dumazet, this change moves the code initializing no_srccheck to tcp_conn_request(), rendering the above scenario working again. Fixes: a9407000 ("netfilter: xt_socket: prepare for TCP_NEW_SYN_RECV support") Signed-off-by:
Alex Badics <alex.badics@balabit.com> Signed-off-by:
KOVACS Krisztian <hidden@balabit.com> Signed-off-by:
-
Florian Westphal authored
Fabian reports a possible conntrack memory leak (could not reproduce so far), however, one minor issue can be easily resolved: > cat /proc/net/nf_conntrack | wc -l = 5 > 4 minutes required to clean up the table. We should not report those timed-out entries to the user in first place. And instead of just skipping those timed-out entries while iterating over the table we can also zap them (we already do this during ctnetlink walks, but I forgot about the /proc interface). Fixes: f330a7fd ("netfilter: conntrack: get rid of conntrack timer") Reported-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Vishwanath Pai authored
Create a new revision for the hashlimit iptables extension module. Rev 2 will support higher pps of upto 1 million, Version 1 supports only 10k. To support this we have to increase the size of the variables avg and burst in hashlimit_cfg to 64-bit. Create two new structs hashlimit_cfg2 and xt_hashlimit_mtinfo2 and also create newer versions of all the functions for match, checkentry and destroy. Some of the functions like hashlimit_mt, hashlimit_mt_check etc are very similar in both rev1 and rev2 with only minor changes, so I have split those functions and moved all the common code to a *_common function. Signed-off-by:
Vishwanath Pai <vpai@akamai.com> Signed-off-by:
Joshua Hunt <johunt@akamai.com> Signed-off-by:
-
Vishwanath Pai authored
I am planning to add a revision 2 for the hashlimit xtables module to support higher packets per second rates. This patch renames all the functions and variables related to revision 1 by adding _v1 at the end of the names. Signed-off-by:
-
Liping Zhang authored
NFT_CT_MARK is unrelated to direction, so if NFTA_CT_DIRECTION attr is specified, report EINVAL to the userspace. This validation check was already done at nft_ct_get_init, but we missed it in nft_ct_set_init. Signed-off-by:
-
Liping Zhang authored
Currently, if the user want to match ct l3proto, we must specify the direction, for example: # nft add rule filter input ct original l3proto ipv4 ^^^^^^^^ Otherwise, error message will be reported: # nft add rule filter input ct l3proto ipv4 nft add rule filter input ct l3proto ipv4 <cmdline>:1:1-38: Error: Could not process rule: Invalid argument add rule filter input ct l3proto ipv4 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Actually, there's no need to require NFTA_CT_DIRECTION attr, because ct l3proto and protocol are unrelated to direction. And for compatibility, even if the user specify the NFTA_CT_DIRECTION attr, do not report error, just skip it. Signed-off-by: -
Gao Feng authored
It is valid that the TCP RST packet which does not set ack flag, and bytes of ack number are zero. But current seqadj codes would adjust the "0" ack to invalid ack number. Actually seqadj need to check the ack flag before adjust it for these RST packets. The following is my test case client is 10.26.98.245, and add one iptable rule: iptables -I INPUT -p tcp --sport 12345 -m connbytes --connbytes 2: --connbytes-dir reply --connbytes-mode packets -j REJECT --reject-with tcp-reset This iptables rule could generate on TCP RST without ack flag. server:10.172.135.55 Enable the synproxy with seqadjust by the following iptables rules iptables -t raw -A PREROUTING -i eth0 -p tcp -d 10.172.135.55 --dport 12345 -m tcp --syn -j CT --notrack iptables -A INPUT -i eth0 -p tcp -d 10.172.135.55 --dport 12345 -m conntrack --ctstate INVALID,UNTRACKED -j SYNPROXY --sack-perm --timestamp --wscale 7 --mss 1460 iptables -A OUTPUT -o eth0 -p tcp -s 10.172.135.55 --sport 12345 -m conntrack --ctstate INVALID,UNTRACKED -m tcp --tcp-flags SYN,RST,ACK SYN,ACK -j ACCEPT The following is my test result. 1. packet trace on client root@routers:/tmp# tcpdump -i eth0 tcp port 12345 -n tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [S], seq 3695959829, win 29200, options [mss 1460,sackOK,TS val 452367884 ecr 0,nop,wscale 7], length 0 IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [S.], seq 546723266, ack 3695959830, win 0, options [mss 1460,sackOK,TS val 15643479 ecr 452367884, nop,wscale 7], length 0 IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [.], ack 1, win 229, options [nop,nop,TS val 452367885 ecr 15643479], length 0 IP 10.172.135.55.12345 > 10.26.98.245.45154: Flags [.], ack 1, win 226, options [nop,nop,TS val 15643479 ecr 452367885], length 0 IP 10.26.98.245.45154 > 10.172.135.55.12345: Flags [R], seq 3695959830, win 0, length 0 2. seqadj log on server [62873.867319] Adjusting sequence number from 602341895->546723267, ack from 3695959830->3695959830 [62873.867644] Adjusting sequence number from 602341895->546723267, ack from 3695959830->3695959830 [62873.869040] Adjusting sequence number from 3695959830->3695959830, ack from 0->55618628 To summarize, it is clear that the seqadj codes adjust the 0 ack when receive one TCP RST packet without ack. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Aaron Conole authored
The netfilter hook list never uses the prev pointer, and so can be trimmed to be a simple singly-linked list. In addition to having a more light weight structure for hook traversal, struct net becomes 5568 bytes (down from 6400) and struct net_device becomes 2176 bytes (down from 2240). Signed-off-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-09-24 This series contains updates to i40e and i40evf only. Harshitha removes the ability to set or advertise X722 to 100 Mbps, since it is not supported, so we should not be able to advertise or set the NIC to 100 Mbps. Alan fixes an issue where deleting a MAC filter did not really delete the filter in question. The reason being that the wrong cmd_flag is passed to the firmware. Preethi adds the encapsulation checksum offload negotiation flag, so that we can control it. Jake cleans up the ATR auto_disable_flags use, since some locations disable ATR accidentally using the "full" disable by disabling the flag in the standard flags field. This permanently forces ATR off instead of temporarily disabling it. Then updated checks to include when there are TCP/IP4 sideband rules in effect, where ATR should be disabled. Lastly, adds support to the i40evf driver for setting interrupt moderation values per queue, like in i40e. Henry cleans up unreachable code, since i40e_shutdown_adminq() is always true. Mitch enables support for adaptive interrupt throttling, since all the code for it is already in the interrupt handler. The fixes a rare case where we might get a VSI with no queues and we try to configure RSS, which would result in a divide by zero. Alex fixes an issue where transmit cleanup flow was incorrectly assuming it could check for the flow director bits after it had unmapped the buffer. Then adds a txring_txq() to allow us to convert a i40e_ring/ i40evf_ring to a netdev_tx_queue structure, like ixgbe and fm10k. This avoids having to make a multi-line function call for all the areas that need access to it. Re-factors the Flow Director filter configuration out into a separate function, like we did for the standard xmit path. Cleans up the debugfs hook for Flow Director since it was meant for debug only. ==================== Signed-off-by: -
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160924' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Implement slow-start and other bits This set of patches implements the RxRPC slow-start feature for AF_RXRPC to improve performance and handling of occasional packet loss. This is more or less the same as TCP slow start [RFC 5681]. Firstly, there are some ACK generation improvements: (1) Send ACKs regularly to apprise the peer of our state so that they can do congestion management of their own. (2) Send an ACK when we fill in a hole in the buffer so that the peer can find out that we did this thus forestalling retransmission. (3) Note the final DATA packet's serial number in the final ACK for correlation purposes. and a couple of bug fixes: (4) Reinitialise the ACK state and clear the ACK and resend timers upon entering the client reply reception phase to kill off any pending probe ACKs. (5) Delay the resend timer to allow for nsec->jiffies conversion errors. and then there's the slow-start pieces: (6) Summarise an ACK. (7) Schedule a PING or IDLE ACK if the reply to a client call is overdue to try and find out what happened to it. (8) Implement the slow start feature. ==================== Signed-off-by:
-
Jacob Keller authored
In commit a75e8005 ("i40e: queue-specific settings for interrupt moderation") the i40e driver gained support for setting interrupt moderation values per queue. This patch adds support for this feature to the i40evf driver as well. In addition, a few changes are made to the i40e implementation to add function header documentation comments, as well. This behaves in a similar fashion to the implementation in i40e. Thus, requesting the moderation value when no queue is provided will report queue 0 value, while setting the value without a queue will set all queues at once. Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
In some rare cases, we might get a VSI with no queues. In this case, we cannot configure RSS on this VSI as it will try to divide by zero when configuring the lookup table. Change-ID: I6ae173a7dd3481a081e079eb10eb80275de2adb0 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Alexander Duyck authored
This interface was only ever meant for debug only. Since it is not supposed to be here we are removing it. Change-ID: Id771a1e5e7d3e2b4b7f56591b61fb48c921e1d04 Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
-
Alexander Duyck authored
In an effort to improve code readability I am splitting the Flow Director filter configuration out into a separate function like we have done for the standard xmit path. The general idea is to provide a single block of code that translates the flow specification into a proper Flow Director descriptor. Change-ID: Id355ad8030c4e6c72c57504fa09de60c976a8ffe Signed-off-by:
-
Alexander Duyck authored
This patch adds a txring_txq function which allows us to convert a i40e_ring/i40evf_ring to a netdev_tx_queue structure. This way we can avoid having to make a multi-line function call for all the spots that need access to this. Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b Signed-off-by:
-
