- 17 Nov, 2005 40 commits
-
-
Andrew Morton authored
drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Herbert Xu authored
this patch from Herbert Xu fixes a race by moving termination of the URBs into close() exclusively. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Daniel Drake authored
Peter Favrholdt reported that his Kodak flash device was getting detected as a CDROM, and he helped me track this down to the fact that the device takes a long time (approx 440ms!) to reset. This patch increases the delay to 500ms, which solves the problem. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Oliver Neukum authored
the scsi layer now uses very short sg lists. This breaks the microtek driver. Here is a patch fixes this and some other issues. Signed-off-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Luiz Fernando Capitulino authored
Updates pl2303_update_line_status() to handle X75 and SX1 Siemens mobiles Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Luiz Fernando Capitulino authored
This patch adds two new Siemens mobiles IDs for the pl2303 driver. Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
David Brownell authored
The onetouch support doesn't suspend correctly (leaves an interrupt URB posted, instead of unlinking it) so for now just disable it when PM is in the air. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Josef Balatka authored
Jablotron usb serial interface identification Signed-off-by: Josef Balatka <balatka@email.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Pavel Machek authored
I actually have this device, and kernel reports blacklist entry is no longer neccessary. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
drivers/usb/core/devio.c: In function `proc_ioctl_compat': drivers/usb/core/devio.c:1401: warning: passing arg 1 of `compat_ptr' makes integer from pointer without a cast NFI if this is correct... Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
OGAWA Hirofumi authored
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Marcel Holtmann authored
This patch deletes the bluetooth.txt help file of the bluetty driver and hands over its major device nodes for character devices to the RFCOMM TTY implementation of the Bluetooth subsystem. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dmitry Torokhov authored
USB: fix 'unused variable' warning Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ping Cheng authored
This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. and report Device IDs. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ping Cheng authored
This patch adds support for Graphire4, Cintiq 710, Intuos3 6x11, etc. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Kroah-Hartman authored
People are complaining about a .old file in the tree. So rename drivers/usb/serial/ChangeLog.old to ChangeLog.history. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Greg Kroah-Hartman authored
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Deepak Saxena authored
Platform device conversion missed a couple of spots. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
-
Linus Torvalds authored
The second __const_sigaddset() should have been a sigdelset.. Compile trouble noted by Greg K-H. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Constantine Gavrilov authored
Due to incomplete memory constraints, gcc would miscompile code with sigaddset on i386 if sig arg was const. A quote form Jakub to make the issue clear: "You need either __asm__("btsl %1,%0" : "+m"(*set) : "Ir"(_sig-1) : "cc"); or __asm__("btsl %1,%0" : "=m"(*set) : "Ir"(_sig-1), "m"(*set) : "cc"); because the btsl instruction doesn't just set the memory to some value, but needs to read its previous content as well. If you don't tell that fact to GCC, GCC is of course free to optimize as if the asm was just setting the value and not depended on the previous value." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Zhu Yi authored
This fixes a slab corruption issue in the ipw2200 driver: it essentially multiplied the error log number _twice_ by the size of the error element entry (once explicitly in the code, and once implicitly as part of the regular pointer arithmetic). Cc: Henrik Brix Andersen <brix@gentoo.org> Cc: Bernard Blackham <bernard@blackham.com.au> Cc: Zilvinas Valinskas <zilvinas@gemtek.lt> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> --
-
Pekka Enberg authored
The function ipw_request_direct_scan() should bail out when the device is down. This fixes a lockup caused by wpa_supplicant triggering ipw_request_direct_scan() while the driver was in a middle of a reset due to firmware errors. Thanks to Zilvinas Valinskas for reporting the bug and helping me debug it. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
There is no definition for seadint_init() and the unprotected prototype breaks compilation of assembler files. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
This driver supports the IDE port on the Sibyte Swarm evaluation boards and it's relatives for the BCM1250 family of systems on a chip. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Pantelis Antoniou authored
This is needed to make console output appear with the new driver... Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Arnaud Giersch authored
Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Arnaud Giersch authored
Add const qualifier to parameter addr of writes##bwlq. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Arnaud Giersch authored
Add __iomem qualifier to crime and mace pointers. Signed-off-by: Arnaud Giersch <arnaud.giersch@free.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-