- 31 Jul, 2017 40 commits
-
-
Jason Yan authored
[ Upstream commit 3fb632e4 ] The sb->super_offset should be big-endian, but the rdev->sb_start is in host byte order, so fix this by adding cpu_to_le64. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 3ed5ca2e ] We catch this record to provide a visual indication that events are getting lost, then call the default method to allow extra logging shared with the other tools to take place. This extra logging was done twice because we were continuing to the "default" clause where machine__process_event() will end up calling machine__process_lost_event() again, fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-wus2zlhw3qo24ye84ewu4aqw@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Markus Trippelsdorf authored
[ Upstream commit d85ce830 ] One line in perf_pmu__parse_unit() is indented wrongly, leading to a warning (=> error) from gcc 6: util/pmu.c:156:3: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] sret = read(fd, alias->unit, UNIT_MAX_LEN); ^~~~ util/pmu.c:153:2: note: ...this 'if' clause, but it is not if (fd == -1) ^~ Signed-off-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: 410136f5 ("tools/perf/stat: Add event unit and scale support") Link: http://lkml.kernel.org/r/20151214154440.GC1409@x4Signed-off-by:
-
Markus Trippelsdorf authored
[ Upstream commit d4913cbd ] The issue was pointed out by gcc-6's -Wmisleading-indentation. Signed-off-by:
-
Eric Engestrom authored
[ Upstream commit 3b556bce ] Signed-off-by:
Eric Engestrom <eric.engestrom@imgtec.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1461577678-29517-1-git-send-email-eric.engestrom@imgtec.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit a5e8e825 ] The readdir() function is thread safe as long as just one thread uses a DIR, which is the case in 'perf script', so, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-mt3xz7n2hl49ni2vx7kuq74g@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 7093b4c9 ] The readdir() function is thread safe as long as just one thread uses a DIR, which is the case when synthesizing events for pre-existing threads by traversing /proc, so, to avoid breaking the build with glibc-2.23.90 (upcoming 2.24), use it instead of readdir_r(). See: http://man7.org/linux/man-pages/man3/readdir.3.html "However, in modern implementations (including the glibc implementation), concurrent calls to readdir() that specify different directory streams are thread-safe. In cases where multiple threads must read from the same directory stream, using readdir() with external synchronization is still preferable to the use of the deprecated readdir_r(3) function." Noticed while building on a Fedora Rawhide docker container. CC /tmp/build/perf/util/event.o util/event.c: In function '__event__synthesize_thread': util/event.c:466:2: error: 'readdir_r' is deprecated [-Werror=deprecated-declarations] while (!readdir_r(tasks, &dirent, &next) && next) { ^~~~~ In file included from /usr/include/features.h:368:0, from /usr/include/stdint.h:25, from /usr/lib/gcc/x86_64-redhat-linux/6.0.0/include/stdint.h:9, from /git/linux/tools/include/linux/types.h:6, from util/event.c:1: /usr/include/dirent.h:189:12: note: declared here Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-i1vj7nyjp2p750rirxgrfd3c@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 2e2bbc03 ] Addressing a few cases spotted by a new warning in gcc 7: tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1790:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 90 [-Werror=format-truncation=] snprintf(name, MAX_NAME, "cpu/event=%s/u", ent->d_name); ^~ In file included from /usr/include/stdio.h:939:0, from /git/linux/tools/perf/util/map.h:9, from /git/linux/tools/perf/util/symbol.h:7, from /git/linux/tools/perf/util/evsel.h:10, from tests/parse-events.c:3: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 268 bytes into a destination of size 100 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ tests/parse-events.c:1798:29: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 100 [-Werror=format-truncation=] snprintf(name, MAX_NAME, "%s:u,cpu/event=%s/u", ent->d_name, ent->d_name); Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 945aea22 ("perf tests: Move test objects into 'tests' directory") Link: http://lkml.kernel.org/n/tip-ty4q2p8zp1dp3mskvubxskm5@git.kernel.orgSigned-off-by:
-
Wang YanQing authored
[ Upstream commit d7dd112e ] Fix below compile error: CC util/scripting-engines/trace-event-perl.o In file included from /usr/lib/perl5/5.22.2/i686-linux/CORE/perl.h:5673:0, from util/scripting-engines/trace-event-perl.c:31: /usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h: In function 'S__is_utf8_char_slow': /usr/lib/perl5/5.22.2/i686-linux/CORE/inline.h:270:5: error: nested extern declaration of 'Perl___notused' [-Werror=nested-externs] dTHX; /* The function called below requires thread context */ ^ cc1: all warnings being treated as errors After digging perl5 repository, I find out that we will meet this compile error with perl from v5.21.1 to v5.25.4 Signed-off-by:
Wang YanQing <udknight@gmail.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170212024655.GA15997@udknightSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit bdf23a9a ] The size of dirent->dt_name is NAME_MAX + 1, but the size for the 'path' buffer is hard coded at 256, which may truncate it because we also prepend "/proc/", so that all that into account and thank gcc 7 for this warning: /git/linux/tools/perf/util/thread_map.c: In function 'thread_map__new_by_uid': /git/linux/tools/perf/util/thread_map.c:119:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 250 [-Werror=format-truncation=] snprintf(path, sizeof(path), "/proc/%s", dirent->d_name); ^~ In file included from /usr/include/stdio.h:939:0, from /git/linux/tools/perf/util/thread_map.c:5: /usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 7 and 262 bytes into a destination of size 256 return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ __bos (__s), __fmt, __va_arg_pack ()); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-csy0r8zrvz5efccgd4k12c82@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 7b0214b7 ] The implicit fall through case label here is intended, so let us inform that to gcc >= 7: CC /tmp/build/perf/builtin-top.o builtin-top.c: In function 'display_thread': builtin-top.c:644:7: error: this statement may fall through [-Werror=implicit-fallthrough=] if (errno == EINTR) ^ builtin-top.c:647:3: note: here default: ^~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lmcfnnyx9ic0m6j0aud98p4e@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 94bdd5ed ] The implicit fall through case label here is intended, so let us inform that to gcc >= 7: CC /tmp/build/perf/util/string.o util/string.c: In function 'perf_atoll': util/string.c:22:7: error: this statement may fall through [-Werror=implicit-fallthrough=] if (*p) ^ util/string.c:24:3: note: here case '\0': ^~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0ophb30v9apkk6o95el0rqlq@git.kernel.orgSigned-off-by:
-
Cong Wang authored
[ Upstream commit f991af3d ] The retry logic for netlink_attachskb() inside sys_mq_notify() is nasty and vulnerable: 1) The sock refcnt is already released when retry is needed 2) The fd is controllable by user-space because we already release the file refcnt so we when retry but the fd has been just closed by user-space during this small window, we end up calling netlink_detachskb() on the error path which releases the sock again, later when the user-space closes this socket a use-after-free could be triggered. Setting 'sock' to NULL here should be sufficient to fix it. Reported-by:
GeneBlue <geneblue.mail@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 57cb17e7 ] This function has two callers and neither are able to handle a NULL return. Really, -EINVAL is the correct thing return here anyway. This fixes some static checker warnings like: security/keys/encrypted-keys/encrypted.c:709 encrypted_key_decrypt() error: uninitialized symbol 'master_key'. Fixes: 7e70cb49 ("keys: add new key-type encrypted") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 236222d3 ] According to the Intel datasheet, the REP MOVSB instruction exposes a pretty heavy setup cost (50 ticks), which hurts short string copy operations. This change tries to avoid this cost by calling the explicit loop available in the unrolled code for strings shorter than 64 bytes. The 64 bytes cutoff value is arbitrary from the code logic point of view - it has been selected based on measurements, as the largest value that still ensures a measurable gain. Micro benchmarks of the __copy_from_user() function with lengths in the [0-63] range show this performance gain (shorter the string, larger the gain): - in the [55%-4%] range on Intel Xeon(R) CPU E5-2690 v4 - in the [72%-9%] range on Intel Core i7-4810MQ Other tested CPUs - namely Intel Atom S1260 and AMD Opteron 8216 - show no difference, because they do not expose the ERMS feature bit. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
-
Markus Trippelsdorf authored
[ Upstream commit 7ebb9167 ] gcc-7 warns: In file included from arch/x86/tools/relocs_64.c:17:0: arch/x86/tools/relocs.c: In function ‘process_64’: arch/x86/tools/relocs.c:953:2: warning: argument 1 null where non-null expected [-Wnonnull] qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/tools/relocs.h:6:0, from arch/x86/tools/relocs_64.c:1: /usr/include/stdlib.h:741:13: note: in a call to function ‘qsort’ declared here extern void qsort This happens because relocs16 is not used for ELF_BITS == 64, so there is no point in trying to sort it. Make the sort_relocs(&relocs16) call 32bit only. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 996fab55 ] A new Sierra Wireless EM7305 device ID used in a Toshiba laptop. Reported-by:
Petr Kloc <petr_kloc@yahoo.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 8fb060da ] Add two Longcheer device-id entries which specifically enables a Telewell TW-3G HSPA+ branded modem (0x9801). Reported-by:
Teemu Likonen <tlikonen@iki.fi> Reported-by:
Lars Melin <larsm17@gmail.com> Tested-by:
-
Geert Uytterhoeven authored
[ Upstream commit 3091ae77 ] Update the sh_pfc_soc_info pointer after calling the SoC-specific initialization function, as it may have been updated to e.g. handle different SoC revisions. This makes sure the correct subdriver name is printed later. Fixes: 0c151062 ("sh-pfc: Add support for SoC-specific initialization") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit da6c2add ] To set the mux mode of a pin two bits must be set. Up to now this is implemented using the following idiom: writel(mask, reg + CLR); writel(value, reg + SET); . This however results in the mux mode being 0 between the two writes. On my machine there is an IC's reset pin connected to LCD_D20. The bootloader configures this pin as GPIO output-high (i.e. not holding the IC in reset). When Linux reconfigures the pin to GPIO the short time LCD_D20 is muxed as LCD_D20 instead of GPIO_1_20 is enough to confuse the connected IC. The same problem is present for the pin's drive strength setting which is reset to low drive strength before using the right value. So instead of relying on the hardware to modify the register setting using two writes implement the bit toggling using read-modify-write. Fixes: 17723111 ("pinctrl: add pinctrl-mxs support") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 97ba26b8 ] The nand_groups table uses different names for the NAND DQS pins than the GROUP() definition in meson8b_cbus_groups (nand_dqs_0 vs nand_dqs0). This prevents using the NAND DQS pins in the devicetree. Fix this by ensuring that the GROUP() definition and the meson8b_cbus_groups use the same name for these pins. Fixes: 0fefcb68 ("pinctrl: Add support for Meson8b") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 915f3e3f ] mac80211_hwsim initializes a hrtimer with clockid CLOCK_MONOTONIC_RAW. That's not supported. Use CLOCK_MONOTNIC instead. Signed-off-by:
-
Benjamin Herrenschmidt authored
[ Upstream commit 7cf916bd ] The current definition is wrong. This breaks my upcoming Aspeed virtual hub driver. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Michael Grzeschik authored
[ Upstream commit b3b51417 ] The usbip stack dynamically allocates the transfer_buffer and setup_packet of each urb that got generated by the tcp to usb stub code. As these pointers are always used only once we will set them to NULL after use. This is done likewise to the free_urb code in vudc_dev.c. This patch fixes double kfree situations where the usbip remote side added the URB_FREE_BUFFER. Cc: stable@vger.kernel.org Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Devin Heitmueller authored
[ Upstream commit 6836796d ] The USB core and sysfs will attempt to enumerate certain parameters which are unsupported by the au0828 - causing inconsistent behavior and sometimes causing the chip to reset. Avoid making these calls. This problem manifested as intermittent cases where the au8522 would be reset on analog video startup, in particular when starting up ALSA audio streaming in parallel - the sysfs entries created by snd-usb-audio on streaming startup would result in unsupported control messages being sent during tuning which would put the chip into an unknown state. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jeremie Rapin authored
[ Upstream commit fd90f73a ] Added the USB serial device ID for the CEL ZigBee EM3588 radio stick. Signed-off-by:
Jeremie Rapin <rapinj@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by:
-
Felipe Balbi authored
[ Upstream commit 04fb365c ] %p will leak kernel pointers, so let's not expose the information on dmesg and instead use %pK. %pK will only show the actual addresses if explicitly enabled under /proc/sys/kernel/kptr_restrict. Cc: <stable@vger.kernel.org> Acked-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit 9e52b325 ] Always try to parse an address, since kstrtoul() will safely fail when given a symbol as input. If that fails (which will be the case for a symbol), try to parse a symbol instead. This allows creating a probe such as: p:probe/vlan_gro_receive 8021q:vlan_gro_receive+0 Which is necessary for this command to work: perf probe -m 8021q -a vlan_gro_receive Link: http://lkml.kernel.org/r/fd72d666f45b114e2c5b9cf7e27b91de1ec966f1.1498122881.git.sd@queasysnail.net Cc: stable@vger.kernel.org Fixes: 413d37d1 ("tracing: Add kprobe-based event tracer") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Rafał Miłecki authored
[ Upstream commit b4dfd8e9 ] This fixes Ethernet on D-Link DIR-885L with BCM47094 SoC. Felix reported similar fix was needed for his BCM4709 device (Buffalo WXR-1900DHP?). I tested this for regressions on BCM4706, BCM4708A0 and BCM47081A0. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrian Salido authored
[ Upstream commit 62655397 ] The driver_override implementation is susceptible to race condition when different threads are reading vs storing a different driver override. Add locking to avoid race condition. Fixes: 3d713e0e ("driver core: platform: add device binding path 'driver_override'") Cc: stable@vger.kernel.org Signed-off-by:
Adrian Salido <salidoa@google.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 629e014b ] Currently we just stash anything we got into file->f_flags, and the report it in fcntl(F_GETFD). This patch just clears out all unknown flags so that we don't pass them to the fs or report them. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 80f18379 ] Add a central define for all valid open flags, and use it in the uniqueness check. Signed-off-by:
-
Wanpeng Li authored
[ Upstream commit d4912215 ] WARNING: CPU: 3 PID: 2840 at arch/x86/kvm/vmx.c:10966 nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] CPU: 3 PID: 2840 Comm: qemu-system-x86 Tainted: G OE 4.12.0-rc3+ #23 RIP: 0010:nested_vmx_vmexit+0xdcd/0xde0 [kvm_intel] Call Trace: ? kvm_check_async_pf_completion+0xef/0x120 [kvm] ? rcu_read_lock_sched_held+0x79/0x80 vmx_queue_exception+0x104/0x160 [kvm_intel] ? vmx_queue_exception+0x104/0x160 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x1171/0x1ce0 [kvm] ? kvm_arch_vcpu_load+0x47/0x240 [kvm] ? kvm_arch_vcpu_load+0x62/0x240 [kvm] kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? kvm_vcpu_ioctl+0x384/0x7b0 [kvm] ? __fget+0xf3/0x210 do_vfs_ioctl+0xa4/0x700 ? __fget+0x114/0x210 SyS_ioctl+0x79/0x90 do_syscall_64+0x81/0x220 entry_SYSCALL64_slow_path+0x25/0x25 This is triggered occasionally by running both win7 and win2016 in L2, in addition, EPT is disabled on both L1 and L2. It can't be reproduced easily. Commit 0b6ac343 (KVM: nVMX: Correct handling of exception injection) mentioned that "KVM wants to inject page-faults which it got to the guest. This function assumes it is called with the exit reason in vmcs02 being a #PF exception". Commit e011c663 (KVM: nVMX: Check all exceptions for intercept during delivery to L2) allows to check all exceptions for intercept during delivery to L2. However, there is no guarantee the exit reason is exception currently, when there is an external interrupt occurred on host, maybe a time interrupt for host which should not be injected to guest, and somewhere queues an exception, then the function nested_vmx_check_exception() will be called and the vmexit emulation codes will try to emulate the "Acknowledge interrupt on exit" behavior, the warning is triggered. Reusing the exit reason from the L2->L0 vmexit is wrong in this case, the reason must always be EXCEPTION_NMI when injecting an exception into L1 as a nested vmexit. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Fixes: e011c663 ("KVM: nVMX: Check all exceptions for intercept during delivery to L2") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Radim Krčmář authored
[ Upstream commit f0367ee1 ] Static checker noticed that base3 could be used uninitialized if the segment was not present (useable). Random stack values probably would not pass VMCS entry checks. Reported-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit a69261e4 ] The "goto err_armclk;" error path already does a clk_put(s3c_freq->hclk); so this is a double free. Fixes: 34ee5507 ([CPUFREQ] Add S3C2416/S3C2450 cpufreq driver) Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Pan Bian authored
[ Upstream commit 73dbd4a4 ] In function amd_iommu_bind_pasid(), the control flow jumps to label out_free when pasid_state->mm and mm is NULL. And mmput(mm) is called. In function mmput(mm), mm is referenced without validation. This will result in a NULL dereference bug. This patch fixes the bug. Signed-off-by:
Pan Bian <bianpan2016@163.com> Fixes: f0aac63b ('iommu/amd: Don't hold a reference to mm_struct') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
David Dillow authored
[ Upstream commit f7116e11 ] dma_pte_free_level() recurses down the IOMMU page tables and frees directory pages that are entirely contained in the given PFN range. Unfortunately, it incorrectly calculates the starting address covered by the PTE under consideration, which can lead to it clearing an entry that is still in use. This occurs if we have a scatterlist with an entry that has a length greater than 1026 MB and is aligned to 2 MB for both the IOMMU and physical addresses. For example, if __domain_mapping() is asked to map a two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000, it will ask if dma_pte_free_pagetable() is asked to PFNs from 0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from 0xffff80000 to 0xffff801ff because of this issue. The current code will set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside the range being cleared. Properly setting the level_pfn for the current level under consideration catches that this PTE is outside of the range being cleared. This patch also changes the value passed into dma_pte_free_level() when it recurses. This only affects the first PTE of the range being cleared, and is handled by the existing code that ensures we start our cursor no lower than start_pfn. This was found when using dma_map_sg() to map large chunks of contiguous memory, which immediatedly led to faults on the first access of the erroneously-deleted mappings. Fixes: 3269ee0b ("intel-iommu: Fix leaks in pagetable freeing") Reviewed-by:
Benjamin Serebrin <serebrin@google.com> Signed-off-by:
David Dillow <dillow@google.com> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 9e25ebfe ] The pmd containing memblock_limit is cleared by prepare_page_table() which creates the opportunity for early_alloc() to allocate unmapped memory if memblock_limit is not pmd aligned causing a boot-time hang. Commit 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") attempted to resolve this problem, but there is a path through the adjust_lowmem_bounds() routine where if all memory regions start and end on pmd-aligned addresses the memblock_limit will be set to arm_lowmem_limit. Since arm_lowmem_limit can be affected by the vmalloc early parameter, the value of arm_lowmem_limit may not be pmd-aligned. This commit corrects this oversight such that memblock_limit is always rounded down to pmd-alignment. Fixes: 965278dc ("ARM: 8356/1: mm: handle non-pmd-aligned end of RAM") Signed-off-by:
Doug Berger <opendmb@gmail.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Eric Anholt authored
[ Upstream commit fedf266f ] The bcm_kona_wdt_set_resolution_reg() call takes the spinlock, so initialize it earlier. Fixes a warning at boot with lock debugging enabled. Fixes: 6adb730d ("watchdog: bcm281xx: Watchdog Driver") Signed-off-by:
Eric Anholt <eric@anholt.net> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 1e3d0c2c ] There are some missing error codes here so we accidentally return NULL instead of an error pointer. It results in a NULL pointer dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
