Replace the DT-specific of_get_mac_address() function with
device_get_mac_address, which works on both DT and ACPI platforms.  This
change makes it easier to add ACPI support.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The platform_device returned by of_find_device_by_node() is not
automatically released when the driver unprobes.  Therefore,
managed calls like devm_ioremap_resource() should not be used.
Instead, we manually allocate the resources and then free them
on driver release.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppose you have a map array value that is something like this

struct foo {
	unsigned iter;
	int array[SOME_CONSTANT];
};

You can easily insert this into an array, but you cannot modify the contents of
foo->array[] after the fact.  This is because we have no way to verify we won't
go off the end of the array at verification time.  This patch provides a start
for this work.  We accomplish this by keeping track of a minimum and maximum
value a register could be while we're checking the code.  Then at the time we
try to do an access into a MAP_VALUE we verify that the maximum offset into that
region is a valid access into that memory region.  So in practice, code such as
this

unsigned index = 0;

if (foo->iter >= SOME_CONSTANT)
	foo->iter = index;
else
	index = foo->iter++;
foo->array[index] = bar;

would be allowed, as we can verify that index will always be between 0 and
SOME_CONSTANT-1.  If you wish to use signed values you'll have to have an extra
check to make sure the index isn't less than 0, or do something like index %=
SOME_CONSTANT.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 900f65d3 ("tcp: move duplicate code from
tcp_v4_init_sock()/tcp_v6_init_sock()") we no longer need
to export sk_stream_write_space()

From: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code changes txhash (flowlables) on every retransmitted
SYN/ACK, but only after the 2nd retransmitted SYN and only after
tcp_retries1 RTO retransmits.

With this patch:
1) txhash is changed with every SYN retransmits
2) txhash is changed with every RTO.

The result is that we can start re-routing around failed (or very
congested paths) as soon as possible. Otherwise application health
checks may fail and the connection may be terminated before we start
to change txhash.

v4: Removed sysctl, txhash is changed for all RTOs
v3: Removed text saying default value of sysctl is 0 (it is 100)
v2: Added sysctl documentation and cleaned code

Tested with packetdrill tests
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the created tc actions list is reversed against the order
set by the user.
Change the actions list order to be the same as was set by the user.

This patch doesn't affect dump actions behavior.
For dumping, action->order parameter is used so the list order doesn't
matter.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for the first two members of the Renesas RZ/G family, RZ/G1M/E
(also known as  R8A7743/5). The Ether core is the same as in the R-Car gen2
SoCs, so will share the code/data with them...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
fib offload: switch to notifier

The goal of this patchset is to allow driver to propagate all prefixes
configured in kernel down HW. This is necessary for routing to work
as expected. If we don't do that HW might forward prefixes known to kernel
incorrectly. Take an example when default route is set in switch HW and there
is an IP address set on a management (non-switch) port.

Currently, only FIB entries related to the switch port netdev are
offloaded using switchdev ops. This model is not extendable so the
first patch introduces a replacement: notifier to propagate FIB entry
additions and removals to whoever is interested.

The second patch introduces couple of helpers to deal with RTNH_F_OFFLOAD
flags. Currently it is set in switchdev core. There the assumption is
that only one offload device exists. But for FIB notifier, we assume
multiple offload devices. So the patch introduces a per FIB entry
reference counter and helpers use it in order to achieve this:
   0 means RTNH_F_OFFLOAD is not set, no device offloads this entry
   n means RTNH_F_OFFLOAD is set and the entry is offloaded by n devices

Patches 3 and 4 convert mlxsw and rocker to adopt this new way, registering
one notifier block for each asic instance. Both of these patches also
implement internal "abort" mechanism.

Using switchdev ops, "abort" is called by switchdev core whenever there is
an error during FIB entry add offload. This leads to removal of all
offloaded entries on system by fib_trie code.

Now the new notifier assumes the driver takes care of the abort action.
Here's why:
1) The fact that one HW cannot offload an entry does not mean that the
   others can't do it. So let only one entity to abort and leave the rest
   to work happily.
2) The driver knows what to in order to properly abort. For example,
   currently abort is broken for mlxsw, as for Spectrum there is a need
   to set 0.0.0.0/0 trap in RALUE register.

The fifth patch removes the old, no longer used FIB offload infrastructure.

The last patch reflects the changes into switchdev documentation file.

---
v2->v3:
 -patch 3/6
   -fixed offload inc/dec to be done in fib4_entry_init/fini and only
    in case !trap as suggested by Ido
v1->v2:
 -patch 3/6:
   -fixed lpm tree setup and binding for abort and pointed out by Ido
   -do nexthop checks as suggested by Ido
   -fix use after free during abort
 -patch 6/6:
   -fixed texts as suggested by Ido
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This is to reflect the change of FIB offload infrastructure from
switchdev objects to FIB notifier.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since this is now taken care of by FIB notifier, remove the code, with
all unused dependencies.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Until now, in order to offload a FIB entry to HW we use switchdev op.
Use the newly introduced FIB notifier infrasturucture to process
FIB entries to offload the in HW.
Abort mechanism is now handled within the rocker driver.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Until now, in order to offload a FIB entry to HW we use switchdev op.
However that has limits. Mainly in case we need to make the HW aware of
all route prefixes configured in kernel. HW needs to know those in order
to properly trap appropriate packets and pass the to kernel to do
the forwarding. Abort mechanism is now handled within the mlxsw driver.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These helpers are to be used in case someone offloads the FIB entry. The
result is that if the entry is offloaded to at least one device, the
offload flag is set.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows to pass information about added/deleted FIB entries/rules to
whoever is interested. This is done in a very similar way as devinet
notifies address additions/removals.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code use the encapsulation key id value as the mask of that
parameter which is wrong. Fix that by using a full mask.

Fixes: bc3103f1 ('net/sched: cls_flower: Classify packet in ip tunnels')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Acked-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
1GbE Intel Wired LAN Driver Updates 2016-09-27

This series contains updates to igb and igbvf.

Wei Yongjun makes a function static to shut up sparse.

Todd bumps the igb and igbvf version, which is long overdue.

Jake fixes an issue where the PPS SYS_WRAP interrupt was not re-enabled
after a reset, which resulted in disabling of the PPS signaling.

v2: dropped patch 5 of the original series, since the PCI quirk patch
    needs to be reworked by Alex and Sasha to address issues that Bjorn
    Helgaas and Alex Williamson brought up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.

This doesn't change the behavior.

Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

put_cpu_var takes the percpu data, not the data returned from
get_cpu_var.

This doesn't change the behavior.

Cc: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a reset occurs, the PPS SYS_WRAP interrupt was not re-enabled which
resulted in disabling of the PPS signaling. Fix this by recording when
the interrupt is on and ensuring that we re-enable it every time we
reset.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump igb version to match other igb drivers.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Bump version to match other igbvf drivers.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Fixes the following sparse warning:

drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning:
 symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The group list must be freed prior to freeing the command otherwise
we have a use-after-free.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nelson Chang says:

====================
net: ethernet: mediatek: some bug fixes for PDAM and HW LRO

1) Add to stop PDMA while stopping the frame engine
2) Modify the register settings for LRO relinquishments
3) Jump out from the waiting loop while LRO relinquishments are done
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

(1) Modify the register settings for LRO relinquishments
(2) Jump out from the waiting loop while LRO relinquishments are done
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stop PDMA while the frame engine is going to stop.
Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Philippe Reynes says:

====================
net: bcmgenet: only use new api ethtool_{get|set}_link_ksettings

Some times ago, a serie of patches were committed :
- commit 62469c76 ("net: ethernet: bcmgenet: use phydev from struct net_device")
- commit 6b352ebc ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings")
The first patch add a regression on this driver, so it should be reverted.
As the second patch depend on the former, it should be reverted too.

The first patch is buggy because there is a "trick" in this driver.
The structure phydev is kept in the private data when the interface
go down, and used when the interface go up to enable the phy before
the function phy_connect is called.

I don't have this hardware, neither the datasheet. So I won't
update the driver to avoid this trick.

But the real goal of the first serie was to move to the new api
ethtool_{get|set}_link_ksettings. So I provide a new version of
the patch without the "cleaning" of driver to use the phydev
store in the net_device structure.

Changelog:
v3:
- use priv instead of dev (so all the code use the same phydev)
v2:
- use Florian Fainelli patches for the revert instead of Jaedon Shin
- simply use net: bcmgenet: for the prefix of the patch
====================
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 62469c76 ("net: ethernet: bcmgenet: use phydev
from struct net_device") because it causes GENETv1/2/3 adapters to
expose the following behavior after an ifconfig down/up sequence:

PING fainelli-linux (10.112.156.244): 56 data bytes
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!)

This was previously fixed by commit 5dbebbb4 ("net: bcmgenet:
Software reset EPHY after power on") but the commit we are reverting was
essentially making this previous commit void, here is why.

Without commit 62469c76 we would have the following scenario after
an ifconfig down then up sequence:

- bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is
  initialized *before* we get to initialize the UniMAC, this is
  critical to ensure the PHY is in a correct state, priv->phydev is
  valid, this code executes fine

- second time from bcmgenet_mii_probe(), through the normal
  phy_init_hw() call (which arguably could be optimized out)

Everything is fine in that case. With commit 62469c76, we would have
the following scenario to happen after an ifconfig down then up
sequence:

- bcmgenet_close() calls phy_disonnect() which makes dev->phydev become
  NULL

- when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from
  bcmgenet_power_up() to initialize the internal PHY, the NULL check
  becomes true, so we do not reset the PHY, yet we keep going on and
  initialize the UniMAC, causing MAC activity to occur

- we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is
  too late, the PHY is botched, and causes the above bogus pings/packets
  transmission/reception to occur
Reported-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 6b352ebc ("net: ethernet: broadcom: bcmgenet:
use new api ethtool_{get|set}_link_ksettings").

We needs to revert the commit 62469c76 ("net: ethernet: bcmgenet:
use phydev from struct net_device"), because this commit add a
regression. As the commit 6b352ebc ("net: ethernet: broadcom:
bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend
on the first one, we also need to revert it first.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This prevent future potential pointer leaks when an unprivileged eBPF
program will read a pointer value from its context. Even if
is_valid_access() returns a pointer type, the eBPF verifier replace it
with UNKNOWN_VALUE. The register value that contains a kernel address is
then allowed to leak. Moreover, this fix allows unprivileged eBPF
programs to use functions with (legitimate) pointer arguments.

Not an issue currently since reg_type is only set for PTR_TO_PACKET or
PTR_TO_PACKET_END in XDP and TC programs that can only be loaded as
privileged. For now, the only unprivileged eBPF program allowed is for
socket filtering and all the types from its context are UNKNOWN_VALUE.
However, this fix is important for future unprivileged eBPF programs
which could use pointers in their context.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

seccomp_phase1() does not exist anymore. Instead, update sample to use
__seccomp_filter(). While at it, set max locked memory to unlimited.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

These samples fail to compile as 'struct flow_keys' conflicts with
definition in net/flow_dissector.h. Fix the same by renaming the
structure used in the sample.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason Baron says:

====================
bnx2x: page allocation failure

While configuring ~500 multicast addrs, we ran into high order
page allocation failures. They don't need to be high order, and
thus I'm proposing to split them into at most PAGE_SIZE allocations.

Below is a sample failure.

[1201902.617882] bnx2x: [bnx2x_set_mc_list:12374(eth0)]Failed to create multicast MACs list: -12
[1207325.695021] kworker/1:0: page allocation failure: order:2, mode:0xc020
[1207325.702059] CPU: 1 PID: 15805 Comm: kworker/1:0 Tainted: G        W
[1207325.712940] Hardware name: SYNNEX CORPORATION 1x8-X4i SSD 10GE/S5512LE, BIOS V8.810 05/16/2013
[1207325.722284] Workqueue: events bnx2x_sp_rtnl_task [bnx2x]
[1207325.728206]  0000000000000000 ffff88012d873a78 ffffffff8267f7c7 000000000000c020
[1207325.736754]  0000000000000000 ffff88012d873b08 ffffffff8212f8e0 fffffffc00000003
[1207325.745301]  ffff88041ffecd80 ffff880400000030 0000000000000002 0000c0206800da13
[1207325.753846] Call Trace:
[1207325.756789]  [<ffffffff8267f7c7>] dump_stack+0x4d/0x63
[1207325.762426]  [<ffffffff8212f8e0>] warn_alloc_failed+0xe0/0x130
[1207325.768756]  [<ffffffff8213c898>] ? wakeup_kswapd+0x48/0x140
[1207325.774914]  [<ffffffff82132afc>] __alloc_pages_nodemask+0x2bc/0x970
[1207325.781761]  [<ffffffff82173691>] alloc_pages_current+0x91/0x100
[1207325.788260]  [<ffffffff8212fa1e>] alloc_kmem_pages+0xe/0x10
[1207325.794329]  [<ffffffff8214c9c8>] kmalloc_order+0x18/0x50
[1207325.800227]  [<ffffffff8214ca26>] kmalloc_order_trace+0x26/0xb0
[1207325.806642]  [<ffffffff82451c68>] ? _xfer_secondary_pool+0xa8/0x1a0
[1207325.813404]  [<ffffffff8217cfda>] __kmalloc+0x19a/0x1b0
[1207325.819142]  [<ffffffffa02fe975>] bnx2x_set_rx_mode_inner+0x3d5/0x590 [bnx2x]
[1207325.827000]  [<ffffffffa02ff52d>] bnx2x_sp_rtnl_task+0x28d/0x760 [bnx2x]
[1207325.834197]  [<ffffffff820695d4>] process_one_work+0x134/0x3c0
[1207325.840522]  [<ffffffff82069981>] worker_thread+0x121/0x460
[1207325.846585]  [<ffffffff82069860>] ? process_one_work+0x3c0/0x3c0
[1207325.853089]  [<ffffffff8206f039>] kthread+0xc9/0xe0
[1207325.858459]  [<ffffffff82070000>] ? notify_die+0x10/0x40
[1207325.864263]  [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180
[1207325.871288]  [<ffffffff826852d2>] ret_from_fork+0x42/0x70
[1207325.877183]  [<ffffffff8206ef70>] ? kthread_create_on_node+0x180/0x180

v2:
 -make use of list_next_entry()
 -only use PAGE_SIZE allocations
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we can have high order page allocations that specify
GFP_ATOMIC when configuring multicast MAC address filters.

For example, we have seen order 2 page allocation failures with
~500 multicast addresses configured.

Convert the allocation for the pending list to be done in PAGE_SIZE
increments.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Acked-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, we can have high order page allocations that specify
GFP_ATOMIC when configuring multicast MAC address filters.

For example, we have seen order 2 page allocation failures with
~500 multicast addresses configured.

Convert the allocation for 'mcast_list' to be done in PAGE_SIZE
increments.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Yuval Mintz <Yuval.Mintz@qlogic.com>
Cc: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I stumbled over a new warning during randconfig testing,
with CONFIG_BPF_SYSCALL disabled:

drivers/net/ethernet/netronome/nfp/nfp_net_offload.c: In function 'nfp_net_bpf_offload':
drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: '*((void *)&res+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/net/ethernet/netronome/nfp/nfp_net_offload.c:263:3: error: 'res.n_instr' may be used uninitialized in this function [-Werror=maybe-uninitialized]

As far as I can tell, this is a false positive caused by the compiler
getting confused about a function that is partially inlined, but it's
easy to avoid while improving the code:

The nfp_bpf_jit() stub helper for that configuration is unusual as it
is defined in a header file but not marked 'static inline'. By moving
the compile-time check into the caller using the IS_ENABLED() macro,
we can remove that stub and simplify the nfp_net_bpf_offload_prepare()
function enough to unconfuse the compiler.

Fixes: 7533fdc0 ("nfp: bpf: add hardware bpf offload")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 1 warning when building kernel with W=1:
drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes]

In fact, this function is implemented in
drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called
by no one, thus can be removed.

So this patch removes the unused functions.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We get 10 warnings when building kernel with W=1:
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:304:5: warning: no previous prototype for 'cxgb4_dcb_enabled' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:194:5: warning: no previous prototype for 'setup_sge_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:241:6: warning: no previous prototype for 'free_sge_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:268:5: warning: no previous prototype for 'cfg_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:344:6: warning: no previous prototype for 'free_queues_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:353:5: warning: no previous prototype for 'request_msix_queue_irqs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:379:6: warning: no previous prototype for 'free_msix_queue_irqs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:393:6: warning: no previous prototype for 'name_msix_vecs_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:433:6: warning: no previous prototype for 'enable_rx_uld' [-Wmissing-prototypes]
drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.c:442:6: warning: no previous prototype for 'quiesce_rx_uld' [-Wmissing-prototypes]

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>