1. 10 Aug, 2012 7 commits
    • Arnd Bergmann's avatar
      ARM: s3c24xx: enable CONFIG_BUG for tct_hammer · 15b5eb2d
      Arnd Bergmann authored
      Disabling CONFIG_BUG creates an insane amount of build warnings, which
      makes it useless to check for building defconfigs to see if new
      warnings show up.
      
      Without this patch, building tct_hammer_defconfig results in:
      
      net/packet/af_packet.c: In function 'tpacket_rcv':
      net/packet/af_packet.c:1889:30: warning: 'hdrlen' may be used uninitialized in this function [-Wuninitialized]
      net/core/ethtool.c: In function 'ethtool_get_feature_mask':
      net/core/ethtool.c:213:1: warning: control reaches end of non-void function [-Wreturn-type]
      block/cfq-iosched.c: In function 'cfq_async_queue_prio':
      block/cfq-iosched.c:2914:1: warning: control reaches end of non-void function [-Wreturn-type]
      mm/bootmem.c: In function 'mark_bootmem':
      mm/bootmem.c:352:1: warning: control reaches end of non-void function [-Wreturn-type]
      net/core/dev.c: In function 'skb_warn_bad_offload':
      net/core/dev.c:1904:33: warning: unused variable 'null_features' [-Wunused-variable]
      drivers/mtd/chips/cfi_probe.c: In function 'cfi_chip_setup':
      include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
      include/linux/mtd/map.h:394:11: note: 'r.x[0]' was declared here
      include/linux/mtd/cfi.h:489:3: warning: 'r.x[0]' may be used uninitialized in this function [-Wuninitialized]
      (and many more)
      
      The size of vmlinux increases by 1.78% because of this:
      
      size obj-arm/vmlinux.nobug
         text    data     bss     dec     hex filename
         2108474  116916   55352 2280742  22cd26 obj-arm/vmlinux
      size obj-arm/vmlinux.bug
         text    data     bss     dec     hex filename
         2150804  116916   53696 2321416  236c08 obj-arm/vmlinux
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
      Cc: Ben Dooks <ben-linux@fluff.org>
      15b5eb2d
    • Arnd Bergmann's avatar
      Merge branch 'testing/new-warnings' into fixes · b64456a4
      Arnd Bergmann authored
      These patches all fix bugs that were newly introduced in v3.6-rc1
      and found because they cause a gcc warning with one of the ARM
      defconfigs. Most of them are harmless, but since we're trying
      to get rid of all warnings eventually, we can start with the ones
      that were not there before.
      
      * testing/new-warnings:
        omap-rng: fix use of SIMPLE_DEV_PM_OPS
        spi/s3c64xx: improve error handling
        mtd/omap2: fix dmaengine_slave_config error handling
        gpio: em: do not discard em_gio_irq_domain_cleanup
        ARM: exynos: exynos_pm_add_dev_to_genpd may be unused
        usb/ohci-omap: remove unused variable
        mfd/asic3: fix asic3_mfd_probe return value
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      b64456a4
    • Arnd Bergmann's avatar
      omap-rng: fix use of SIMPLE_DEV_PM_OPS · 59596df6
      Arnd Bergmann authored
      omap_rng_suspend and omap_rng_resume are unused if CONFIG_PM is enabled
      but CONFIG_PM_SLEEP is disabled. I found this while building all defconfig
      files on ARM. It's not clear to me if this is the right solution, but
      at least it makes the code consistent again.
      
      Without this patch, building omap1_defconfig results in:
      
      drivers/char/hw_random/omap-rng.c:165:12: warning: 'omap_rng_suspend' defined but not used [-Wunused-function]
      drivers/char/hw_random/omap-rng.c:171:12: warning: 'omap_rng_resume' defined but not used [-Wunused-function]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarKevin Hilman <khilman@ti.com>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      59596df6
    • Arnd Bergmann's avatar
      spi/s3c64xx: improve error handling · 4732cc63
      Arnd Bergmann authored
      When a device tree definition os an s3c64xx SPI master is missing
      a "controller-data" subnode, the newly added s3c64xx_get_slave_ctrldata
      function might use uninitialized memory in place of that node,
      which was correctly reported by gcc.
      
      Without this patch, building s3c6400_defconfig results in:
      
      drivers/spi/spi-s3c64xx.c: In function 's3c64xx_get_slave_ctrldata.isra.25':
      drivers/spi/spi-s3c64xx.c:841:5: warning: 'data_np' may be used uninitialized in this function [-Wuninitialized]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarThomas Abraham <thomas.abraham@linaro.org>
      Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
      Cc: Jaswinder Singh <jaswinder.singh@linaro.org>
      Cc: Grant Likely <grant.likely@secretlab.ca>
      4732cc63
    • Arnd Bergmann's avatar
      mtd/omap2: fix dmaengine_slave_config error handling · d680e2c1
      Arnd Bergmann authored
      The newly added dmaengine support in the omap2 nand driver
      potentially causes an undefined return value from the
      omap_nand_probe function when dmaengine_slave_config
      reports an error. Let's handle this by returning the
      same error back to the caller.
      
      Without this patch, building omap2plus_defconfig results in:
      
      drivers/mtd/nand/omap2.c: In function 'omap_nand_probe':
      drivers/mtd/nand/omap2.c:1154:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: Russell King <rmk+kernel@arm.linux.org.uk>
      Cc: Grazvydas Ignotas <notasas@gmail.com>
      d680e2c1
    • Arnd Bergmann's avatar
      gpio: em: do not discard em_gio_irq_domain_cleanup · 38eaed32
      Arnd Bergmann authored
      The newly added gpio-em driver marks its em_gio_irq_domain_cleanup
      function as __devexit, which would lead to that function being
      discarded in case CONFIG_HOTPLUG is disabled. However, the function
      is also called by the error handling logic em_gio_probe, which
      would cause a jump into a NULL pointer if it was removed from the
      kernel or module.
      
      Without this patch, building kzm9d_defconfig results in:
      
      WARNING: drivers/gpio/built-in.o(.devinit.text+0x330): Section mismatch in reference from the function em_gio_probe() to the function .devexit.text:em_gio_irq_domain_cleanup()
      The function __devinit em_gio_probe() references
      a function __devexit em_gio_irq_domain_cleanup().
      This is often seen when error handling in the init function
      uses functionality in the exit path.
      The fix is often to remove the __devexit annotation of
      em_gio_irq_domain_cleanup() so it may be used outside an exit section.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: Magnus Damm <damm@opensource.se>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      38eaed32
    • Arnd Bergmann's avatar
      ARM: exynos: exynos_pm_add_dev_to_genpd may be unused · 8ab08c0c
      Arnd Bergmann authored
      exynos_pm_add_dev_to_genpd is used if one or more out of a large
      number of Kconfig symbols are enabled. However the new
      exynos_defconfig selects none of those, so the function becomes
      unused. Marking it so lets the compiler automatically discard
      it.
      
      Without this patch, building exynos_defconfig results in:
      
      arch/arm/mach-exynos/pm_domains.c:118:123: warning: 'exynos_pm_add_dev_to_genpd' defined but not used [-Wunused-function]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarThomas Abraham <thomas.abraham@linaro.org>
      Acked-by: default avatarKukjin Kim <kgene.kim@samsung.com>
      Cc: Rafael J. Wysocki <rjw@sisk.pl>
      8ab08c0c
  2. 09 Aug, 2012 7 commits
    • Arnd Bergmann's avatar
      ARM: imx: gpmi-nand depends on mxs-dma · a3349377
      Arnd Bergmann authored
      It is not currently possible to build the gpmi-nand driver without
      also building the mxs-dma driver. Clarify this Kconfig and enable
      both in the defconfig file so we can build it again with both enabled.
      
      drivers/built-in.o: In function `gpmi_dma_filter':
      clk-fixed-factor.c:(.text+0xafc18): undefined reference to `mxs_dma_is_apbh'
      make[1]: *** [vmlinux] Error 1
      make: *** [sub-make] Error 2
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarDirk Behme <dirk.behme@de.bosch.com>
      Cc: Shawn Guo <shawn.guo@linaro.org>
      Cc: Sascha Hauer <kernel@pengutronix.de>
      a3349377
    • Arnd Bergmann's avatar
      ARM: integrator: include <linux/export.h> · b434f5c9
      Arnd Bergmann authored
      Without this patch, building integrator_defconfig results in:
      
      arch/arm/mach-integrator/core.c:150:1: warning: data definition has no type or storage class [enabled by default]
      arch/arm/mach-integrator/core.c:150:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int]
      arch/arm/mach-integrator/core.c:150:1: warning: parameter names (without types) in function declaration [enabled by default]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Cc: Russell King <linux@arm.linux.org.uk>
      b434f5c9
    • Arnd Bergmann's avatar
      ARM: s3c24xx: use new PWM driver · 35e79061
      Arnd Bergmann authored
      The samsung PWM driver has moved to the new PWM subsystem, which
      changed the Kconfig symbol for that driver, but the rx1950 and
      gta02 boards still uses the old one.
      
      Without this patch, building s3c2410_defconfig results in:
      
      arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_lcd_power':
      arch/arm/mach-s3c24xx/mach-rx1950.c:430: undefined reference to `pwm_config'
      arch/arm/mach-s3c24xx/mach-rx1950.c:431: undefined reference to `pwm_disable'
      arch/arm/mach-s3c24xx/mach-rx1950.c:437: undefined reference to `pwm_config'
      arch/arm/mach-s3c24xx/mach-rx1950.c:438: undefined reference to `pwm_enable'
      arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_exit':
      arch/arm/mach-s3c24xx/mach-rx1950.c:504: undefined reference to `pwm_free'
      arch/arm/mach-s3c24xx/built-in.o: In function `rx1950_backlight_init':
      arch/arm/mach-s3c24xx/mach-rx1950.c:487: undefined reference to `pwm_request'
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Reported-by: default avatarTushar Behera <tushar.behera@linaro.org>
      Cc: Kukjin Kim <kgene.kim@samsung.com>
      35e79061
    • Arnd Bergmann's avatar
      ARM: sa1100: include linux/io.h in hackkit leds code · 9c97738c
      Arnd Bergmann authored
      The sa1100 definition of the io_p2v macro has changed in v3.6, and this one
      file stopped working because of that.
      
      Without this patch, building hackkit_defconfig results in:
      
      arch/arm/mach-sa1100/leds-hackkit.c: In function 'hackkit_leds_event':
      arch/arm/mach-sa1100/leds-hackkit.c:39:4: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: Russell King <linux@arm.linux.org.uk>
      9c97738c
    • Arnd Bergmann's avatar
      Input: eeti_ts: pass gpio value instead of IRQ · 4eef6cbf
      Arnd Bergmann authored
      The EETI touchscreen asserts its IRQ line as soon as it has data in its
      internal buffers. The line is automatically deasserted once all data has
      been read via I2C. Hence, the driver has to monitor the GPIO line and
      cannot simply rely on the interrupt handler reception.
      
      In the current implementation of the driver, irq_to_gpio() is used to
      determine the GPIO number from the i2c_client's IRQ value.
      
      As irq_to_gpio() is not available on all platforms, this patch changes
      this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
      added to the platform_data struct and gpio_to_irq is used to derive the
      IRQ from that GPIO. If this fails, bail out. The driver is only able to
      work in environments where the touchscreen GPIO can be mapped to an
      IRQ.
      
      Without this patch, building raumfeld_defconfig results in:
      
      drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
      drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
      Signed-off-by: default avatarDaniel Mack <zonque@gmail.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: stable@vger.kernel.org (v3.2+)
      Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
      Cc: Sven Neumann <s.neumann@raumfeld.com>
      Cc: linux-input@vger.kernel.org
      Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
      4eef6cbf
    • Arnd Bergmann's avatar
      ARM: pxa: remove irq_to_gpio from ezx-pcap driver · 59ee93a5
      Arnd Bergmann authored
      The irq_to_gpio function was removed from the pxa platform
      in linux-3.2, and this driver has been broken since.
      
      There is actually no in-tree user of this driver that adds
      this platform device, but the driver can and does get enabled
      on some platforms.
      
      Without this patch, building ezx_defconfig results in:
      
      drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work':
      drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarHaojian Zhuang <haojian.zhuang@gmail.com>
      Cc: stable@vger.kernel.org (v3.2+)
      Cc: Samuel Ortiz <sameo@linux.intel.com>
      Cc: Daniel Ribeiro <drwyrm@gmail.com>
      59ee93a5
    • Stephen Warren's avatar
      ARM: tegra: more regulator fixes for Harmony · 798bd59c
      Stephen Warren authored
      Commit 3d55c29f "ARM: tegra: harmony: add regulator supply name and its
      input supply" was supposed to fix all the problems with regulators on
      Harmony. However, it appears that I only tested it when booting using
      board files, not when booting using device tree. This change fixes two
      problems with regulators when booting using device tree:
      
      1) That patch only created the vdd_sys regulator when booting using a
         board file. Since this is the root of the whole regulator tree, this
         caused no regulators to successfully initialize when booting using
         device tree. The registration of vdd_sys is moved to fix this.
      
      2) When booting use DT, the regulator core sets has_full_constraints,
         which in turn causes the core to turn off any regulators not marked
         as always on. Some of the affected regulators are required for basic
         system operation. To solve this, add always on constraints to all
         relevant regulators. This doesn't affect booting using a board file
         since nothing sets has_full_constraints in that case.
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      798bd59c
  3. 08 Aug, 2012 2 commits
    • Arnd Bergmann's avatar
      usb/ohci-omap: remove unused variable · bb1a5805
      Arnd Bergmann authored
      Commit c2e935a7 "USB: move transceiver from ehci_hcd and ohci_hcd to
      hcd and rename it as phy" removed the last use of the "ohci" variable
      in the usb_hcd_omap_remove function, but left the variable in place
      unused.
      
      Without this patch, building omap1_defconfig results in:
      
      In file included from drivers/usb/host/ohci-hcd.c:1013:0:
      drivers/usb/host/ohci-omap.c: In function 'usb_hcd_omap_remove':
      drivers/usb/host/ohci-omap.c:406:19: warning: unused variable 'ohci' [-Wunused-variable]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Acked-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Richard Zhao <richard.zhao@freescale.com>
      bb1a5805
    • Arnd Bergmann's avatar
      mfd/asic3: fix asic3_mfd_probe return value · b2f0fa82
      Arnd Bergmann authored
      In commit 4f304245 "mfd: Set asic3 DS1WM clock_rate", a possible
      path through asic3_mfd_probe was introduced that would lead to
      an unpredictable return value, if everything succeeds but there
      are pdata->leds is NULL. This was reported correctly by gcc.
      
      Without this patch, building magician_defconfig results in:
      
      drivers/mfd/asic3.c: In function 'asic3_mfd_probe':
      drivers/mfd/asic3.c:940:2: warning: 'ret' may be used uninitialized in this function [-Wuninitialized]
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Cc: Paul Parsons <lost.distance@yahoo.com>
      Cc: Philipp Zabel <philipp.zabel@gmail.com>
      Cc: Samuel Ortiz <sameo@linux.intel.com>
      b2f0fa82
  4. 07 Aug, 2012 3 commits
  5. 06 Aug, 2012 4 commits
  6. 04 Aug, 2012 2 commits
  7. 03 Aug, 2012 7 commits
  8. 02 Aug, 2012 8 commits
    • Linus Torvalds's avatar
      Linux 3.6-rc1 · 0d7614f0
      Linus Torvalds authored
      0d7614f0
    • Linus Torvalds's avatar
      Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc · fc6bdb59
      Linus Torvalds authored
      Pull OLPC platform updates from Andres Salomon:
       "These move the OLPC Embedded Controller driver out of
        arch/x86/platform and into drivers/platform/olpc.
      
        OLPC machines are now ARM-based (which means lots of x86 and ARM
        changes), but are typically pretty self-contained..  so it makes more
        sense to go through a separate OLPC tree after getting the appropriate
        review/ACKs."
      
      * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc:
        x86: OLPC: move s/r-related EC cmds to EC driver
        Platform: OLPC: move global variables into priv struct
        Platform: OLPC: move debugfs support from x86 EC driver
        x86: OLPC: switch over to using new EC driver on x86
        Platform: OLPC: add a suspended flag to the EC driver
        Platform: OLPC: turn EC driver into a platform_driver
        Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it
        drivers: OLPC: update various drivers to include olpc-ec.h
        Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
      fc6bdb59
    • Linus Torvalds's avatar
      Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 44d82e29
      Linus Torvalds authored
      Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
       "This contains a set of device-tree conversions for Marvell Orion
        platforms that were staged early but took a few tries to get the
        branch into a format where it was suitable for us to pick up.
      
        Given that most people working on these platforms are hobbyists with
        limited time, we were a bit more flexible with merging it even though
        it came in late."
      
      * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
        ARM: Kirkwood: Replace mrvl with marvell
        ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
        ARM: Kirkwood: Describe Dreamplug LEDs in DT.
        ARM: Kirkwood: Describe iConnects LEDs in DT.
        ARM: Kirkwood: Describe iConnects temperature sensor in DT.
        ARM: Kirkwood: Describe IB62x0 LEDs in DT.
        ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
        ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
        ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
        ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
        ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
        ARM: Kirkwood: Use DT to configure SATA device.
        ARM: kirkwood: use devicetree for SPI on dreamplug
        ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
        ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
        ARM: Kirkwood: Add basic device tree support for QNAP TS219.
        ATA: sata_mv: Add device tree support
        ARM: Orion: DTify the watchdog timer.
        ARM: Orion: Add arch support needed for I2C via DT.
        ARM: kirkwood: use devicetree for orion-spi
        ...
      
      Conflicts:
      	drivers/watchdog/orion_wdt.c
      44d82e29
    • Linus Torvalds's avatar
      Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · bfdf85df
      Linus Torvalds authored
      Pull arm-soc cpuidle enablement for OMAP from Olof Johansson:
       "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree,
        but didn't go in because the pull request ended up rejected.  So it
        just got merged, and we got this staged branch that enables the
        coupled cpuidle code on OMAP.
      
        With a stable git workflow from the other maintainer we could have
        staged this earlier, but that wasn't the case so we have had to merge
        it late.
      
        The alternative is to hold it off until 3.7 but given that the code is
        well-isolated to OMAP and they are eager to see it go in, I didn't
        push back hard in that direction."
      
      * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: OMAP4: CPUidle: Open broadcast clock-event device.
        ARM: OMAP4: CPUidle: add synchronization for coupled idle states
        ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.
        ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
      bfdf85df
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · d1494ba8
      Linus Torvalds authored
      Pull ARM SoC fixes from Olof Johansson:
       "A few fixes for merge window fallout, and a bugfix for timer resume on
        PRIMA2."
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        ARM: mmp: add missing irqs.h
        arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
        ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
        ARM: mxc: Include missing irqs.h header
      d1494ba8
    • Linus Torvalds's avatar
      Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh · 0a276d16
      Linus Torvalds authored
      Pull SuperH fixes from Paul Mundt.
      
      * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits)
        sh: explicitly include sh_dma.h in setup-sh7722.c
        sh: ecovec: care CN5 VBUS if USB host mode
        sh: sh7724: fixup renesas_usbhs clock settings
        sh: intc: initial irqdomain support.
        sh: pfc: Fix up init ordering mess.
        serial: sh-sci: fix compilation breakage, when DMA is enabled
        dmaengine: shdma: restore partial transfer calculation
        sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
        sh: Fix up recursive fault in oops with unset TTB.
        sh: pfc: Build fix for pinctrl_remove_gpio_range() changes.
        sh: select the fixed regulator driver on several boards
        sh: ecovec: switch MMC power control to regulators
        sh: add fixed voltage regulators to se7724
        sh: add fixed voltage regulators to sdk7786
        sh: add fixed voltage regulators to rsk
        sh: add fixed voltage regulators to migor
        sh: add fixed voltage regulators to kfr2r09
        sh: add fixed voltage regulators to ap325rxa
        sh: add fixed voltage regulators to sh7757lcr
        sh: add fixed voltage regulators to sh2007
        ...
      0a276d16
    • Linus Torvalds's avatar
      Merge tag 'md-3.6' of git://neil.brown.name/md · 25aa6a7a
      Linus Torvalds authored
      Pull additional md update from NeilBrown:
       "This contains a few patches that depend on plugging changes in the
        block layer so needed to wait for those.
      
        It also contains a Kconfig fix for the new RAID10 support in dm-raid."
      
      * tag 'md-3.6' of git://neil.brown.name/md:
        md/dm-raid: DM_RAID should select MD_RAID10
        md/raid1: submit IO from originating thread instead of md thread.
        raid5: raid5d handle stripe in batch way
        raid5: make_request use batch stripe release
      25aa6a7a
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · c8924234
      Linus Torvalds authored
      Pull two ceph fixes from Sage Weil:
       "The first patch fixes up the old crufty open intent code to use the
        atomic_open stuff properly, and the second fixes a possible null deref
        and memory leak with the crypto keys."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        libceph: fix crypto key null deref, memory leak
        ceph: simplify+fix atomic_open
      c8924234