* 'drm-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: DRM: fix memset size error
  drm: remove remnants of DRM_COPY_FROM/TO_USER_IOCTL
  drm: remove second forward decleration of drm device struct.

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: handle broken cable reporting
  pata_hpt37x: Fix outstanding bug reports on the HPT374 and 37x cable detect
  ata_piix: Add additional PCI identifier for 40 wire short cable
  pata_serverworks: Fix problem with some drive combinations
  libata: Don't disable dipm with SET FEATURES
  libata and bogus LBA48 drives

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  phylib: Silence driver registration
  phylib: Add ID for Marvell 88E1240
  82596: free nonexistent resource fix
  SUNHME: Fix missing NETIF_F_VLAN_CHALLENGED on PCI happy meals

The size passing to memset is wrong.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is a bug in the savage driver since I introduced these changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@linux.ie>

Keeping the list in sync with the old IDE driver
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix system call defines for system call 180 and 181 to match the underlying
system call table function entries.  System call 180 calls sys_pread64, and
181 calls sys_pwrite64, so make the definitions match.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Release the crypt_stat hash mutex on allocation error. Check for error
conditions when doing crypto hash calls.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reported-by: Kazuki Ohta <kazuki.ohta@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The extent_offset is getting incremented twice per loop iteration through any
given page.  It should only be getting incremented once.  This bug should only
impact hosts with >4K page sizes.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove panic from phonedev.  See

	http://bugzilla.kernel.org/show_bug.cgi?id=9266

for details (phonedev panics if unregistering device not registered).
Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 4ae3f847 ("md: raid5: fix
clearing of biofill operations") did not get applied correctly,
presumably due to substantial similarities between handle_stripe5 and
handle_stripe6.

This patch moves the chunk of new code from handle_stripe6 (where it isn't
needed (yet)) to handle_stripe5.
Signed-off-by: Neil Brown <neilb@suse.de>
Cc: "Dan Williams" <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make virtcons_probe() __devinit.
Fixes this section warning:

WARNING: vmlinux.o(.text+0x14c10b): Section mismatch: reference to .init.text:hvc_alloc (between 'virtcons_probe' and 'ac_register_board')
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change the name of this data to use a name (suffix) that is whitelisted
by MODPOST so that the section warning is fixed (not generated).

WARNING: vmlinux.o(.data+0x1b140): Section mismatch: reference to .init.text:m48t59_rtc_probe (between 'm48t59_rtc_platdrv' and 'm48t59_nvram_attr')
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KERNEL_DEFINES needs whitespace trimmed, otherwise the whitespace crunching
done by make fools the patsubst which is used to remove KERNEL_DEFINES from
USER_CFLAGS.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix an incompatible-pointer warning.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix 'and' typo (PT_WRITE_OK is defined 2)
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes an off-by-one error spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A tiny vestige of arm26 has appeared: remove it again.

(akpm: someone (tm) needs to remove include/asm-arm26/ too)
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a bitmap is empty bitmap_scnlistprintf() would leave the buffer
uninitialized.  Set it to an empty string in this case.

I didn't see any in normal kernel callers hitting this, but some custom
debug code of mine did.
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The Build with randconfig fails with following error with the
2.6.24-rc4-git9

include/linux/kallsyms.h:56: error: `NULL' undeclared (first use in this
function)
include/linux/kallsyms.h:56: error: (Each undeclared identifier is
reported only once
include/linux/kallsyms.h:56: error: for each function it appears in.)
make[2]: *** [arch/powerpc/platforms/cell/spu_callbacks.o] Error 1
make[1]: *** [arch/powerpc/platforms/cell] Error 2
make: *** [arch/powerpc/platforms] Error 2
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Grant Grundler was asking for more detail about correct usage of local
atomic operations and suggested adding the resulting summary to
local_ops.txt.

"Please add a bit more detail. If DaveM is correct (he normally is), then
there must be limits on how the local_t can be used in the kernel process
and interrupt contexts. I'd like those rules spelled out very clearly
since it's easy to get wrong and tracking down such a bug is quite painful."
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/serial/8250_early.c:80: warning: conflicting types for built-in function `putc'
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

max_phys_segments and max_sectors were swapped
Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Let's make immediately obvious from where sysctl comes from and messages
itself more noticeable.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

One or two ancient drives predated the cable spec and didn't sent the
valid bits for the field. I had hoped to leave this out of libata as a
piece of historical annoyance but a recent CD drive shows the same bug so
we have to import support for it.

Same concept as Bartlomiej's changes old IDE except that as we have
centralised blacklists we can avoid keeping another private table of stuff
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

- Read frequency correctly
- Correct cable detect handling
- Fix wrong filter test
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Keeping the list in sync with the old IDE driver
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The driver used the channel not the device number for deciding where to
load some timing parameters. Also change so that we clear the UDMA field
as the old driver did. Not believed neccessary but does no harm.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

It gets quite verbose to see every single PHY driver being registered
by default.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add PHY IDs for Marvell 88E1240. It seems to have close enough programming
models to 1111/1112 for basic support at least.

Also clean up whitespace in the ID list a bit.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

During booting of last vanilla kernel I got:
Trying to free nonexistent resource...

This because of if "ENABLE_APRICOT" is on we do:
request_region(ioaddr,...)
if (checksum test failed)
  goto out1;
dev->base_addr = ioaddr;//<-here mistake

out1:
release_region(dev->base_addr,...)

This change fixes this bug for me.
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

No HME parts can do VLANs correctly.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: bugfixes for leds-gpio

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Add Kconfig option to disable deprecated pci_find_* API
  PCI: pciserial_resume_one ignored return value of pci_enable_device
  PCI Hotplug: cpqhp_pushbutton_thread(): remove a pointless if() check
  PCI: make pci_match_device() static
  PCI: Remove 3 incorrect MSI quirks.
  PCI: Add MSI INTX_DISABLE quirks for ATI SB700/800 SATA and IXP SB400 USB
  PCI: Add quirk for devices which disable MSI when INTX_DISABLE is set.
  PCI: Add MSI quirk for ServerWorks HT1000 PCIX bridge.
  PCI: Revert "PCI: disable MSI by default on systems with Serverworks HT1000 chips"

Three bugfixes to the leds-gpio driver, plus minor whitespace tweaks:

 - Do the INIT_WORK() before registering each LED, so if its trigger
   becomes immediately active it can schedule work without oopsing..

 - Use normal registration, not platform_driver_probe(), so that
   devices appearing "late" (hotplug type) can still be bound.

 - Mark the driver remove code as "__devexit", preventing oopses
   when the underlying device is removed.

These issues came up when using this driver with some GPIO expanders
living on serial busses, which act unlike "normal" platform devices:
they can appear and vanish along with the serial bus driver.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: fix IDE_HFLAG_NO_ATAPI_DMA handling in config_drive_for_dma()
  ide: move ide_fixstring() documentation to ide-iops.c from ide.h
  ide: add missing #ifdef/#endif CONFIG_IDE_TASK_IOCTL
  ide: fix ide_find_dma_mode() to print human-readable info
  ide: add missing rq.ref_count initialization to ide_diag_taskfile()
  ide: clear HOB bit for REQ_TYPE_ATA_TASK requests in ide_end_drive_cmd()
  ide: check rq->cmd_type in drive_cmd_intr()
  ide/Kconfig: fix BLK_DEV_OFFBOARD dependencies
  ide: unexport ide_fix_driveid
  ide/Kconfig: add IDEDISK_MULTI_MODE text adapted from hdparm manual page
  ide: do_identify() string termination fix
  piix: add support for ICH7 on Acer 5602aWLMi

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (26 commits)
  V4L/DVB (6548): pvrusb2: Fix oops on module removal
  V4L/DVB (6547): V4L: remove PCI from VIDEO_VIVI depends
  V4L/DVB (6532): Add the remaining addresses for tda9887
  V4L/DVB (6531): Fix a regression caused by commit 15396236
  V4L/DVB (6518): Fix tvp5150 default values
  V4L/DVB (6514): em28xx: Include linux/mm.h
  V4L/DVB (6506): saa7134-alsa: Fix mmap support
  V4L/DVB (6504): pvrusb2: Remove dead sysfs code
  V4L/DVB (6503): pvrusb2: Fix associativity logic error
  V4L/DVB (6501): stv0297: Signal strength fixes
  V4L/DVB (6500): tda10021: Fix reported signal strength
  V4L/DVB (6499): tda10021: Bit error counting fixed
  V4L/DVB (6498): ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppm
  V4L/DVB (6495): saa7146: saa7146_wait_for_debi_done fixes
  V4L/DVB (6479): use input functions, should depend on INPUT
  V4L/DVB (6478): ir-functions use input functions, should depend on INPUT
  V4L/DVB (6432): tuner: fix CONFIG_TUNER_TEA5761=m
  V4L/DVB (6407): planb: fix obvious interrupt handling bugs
  V4L/DVB (6406): saa7134: fix analog audio in on medion md8800 quadro
  V4L/DVB (6403): mt2131: replace comma with semicolon fix
  ...