- 25 Sep, 2014 2 commits
-
-
Carlo Caione authored
Add vendor prefixes and basic documentation for MesonX SoCs bindings Signed-off-by:
Carlo Caione <carlo@caione.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Carlo Caione authored
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex A9 and an ARM Mali-400 GPU. This patch adds two basic DTSI for the preliminary support of Meson and Meson6 SoCs. Another DTS is also added for supporting the atv1200 board, produced by Geniatech inc. Signed-off-by:
-
- 24 Sep, 2014 11 commits
-
-
Olof Johansson authored
Merge tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo: The i.MX device tree changes for 3.18: - Device tree support for i.MX ADS and Armadeus APF9328 boards - Enable thermal sensor support for i.MX6SL - Add LCD support for i.MX6SL EVK board - Fix display duplicate name for a bunch of board dts files - Configure imx6qdl-sabresd board pins locally to remove the dependency on bootloader - A set of imx28-tx28 board dts updates from Lothar - Add pci config space as platform resource - Enable devices RTC, I2C and HDMI for nitrogen6x board - Split HummingBoard DT to support s/dl and d/q - mSATA and IR input support for HummingBoard - Add SSI baud clock for i.MX6 device trees - Add USB support for vf610-colibri and vf610-twr boards - A set of cleanup and updates on Gateworks boards * tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits) ARM: dts: imx6: make gpt per clock can be from OSC ARM: dts: imx: ventana: add canbus support for GW52xx ARM: dts: imx: ventana: cleanup pinctrl groups ARM: dts: imx: ventana: configure padconf for all pins ARM: dts: imx: ventana: use gpio constants ARM: dts: imx: ventana: remove unused aliases ARM: dts: imx: ventana: remove unsupported dt nodes ARM: dts: imx28-tx28: add alias for CAN XCVR regulator ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs ARM: dts: imx28-tx28: use GPIO flags ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev ARM: dts: imx6sl: add baud clock and clock-names for ssi ARM: dts: imx6qdl: add baud clock and clock-names for ssi ARM: dts: imx6qdl-sabresd: Configure the pins locally ARM: dts: imx28-m28evk: Fix display duplicate name warning ARM: dts: imx28-tx28: Fix display duplicate name warning ARM: dts: imx28-m28cu: Fix display duplicate name warning ARM: dts: imx28-cfa100: Fix display duplicate name warning ARM: dts: imx28-apf28dev: Fix display duplicate name warning ARM: dts: imx28-apx4devkit: Fix display duplicate name warning ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Matthias Brugger authored
This patch changes the compatible string of the GIC to the new "arm,cortex-a7-gic" which does reflect the actual hardware. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Matthias Brugger authored
Add the missing 'compatible' property to device tree root node of - mt6589-aquaris5.dts and document the new values. Signed-off-by:
-
Matthias Brugger authored
Add boot argument for earlyprintk to the aquaris5 device tree file. Signed-off-by:
-
Matthias Brugger authored
This changes the unit address of the gic node to it's first register area. Signed-off-by:
-
Matthias Brugger authored
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek SoC. Signed-off-by:
-
git://git.infradead.org/linux-mvebuOlof Johansson authored
Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper: mvebu DT changes for v3.18 - Armada 375 - Add RTC support - Armada 370 - Add proper pinmuxing - Add SSCG - Add gpio-fan - Add LED support - change Intersil vendor prefix to isil - use improved Armada SPI compatible string * tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add user LED support of Armada 370 RD ARM: mvebu: add gpio fan support to Armada 370 RD ARM: mvebu: Change vendor prefix for Intersil Corporation to isil ARM: mvebu: use improved armada spi device tree compatible name ARM: mvebu: add SSCG to Armada 370 Device Tree ARM: mvebu: Add proper pin muxing on Armada 370 RD board ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104 ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102 ARM: mvebu: Add proper pin muxing on the Armada 370 DB board ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC ARM: mvebu: Add RTC support for Armada 375 Signed-off-by: -
Olof Johansson authored
Merge tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Merge "second bunch of dts changes for 3.18" from Heiko Stubner: More peripheral support for Rockchip SoCs - dwc2 usb controllers - spi controllers - emmc controller * tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock ARM: dts: rockchip: fix rk3188 emmc pull references ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references ARM: dts: rockchip: clean up rk3xxx mmc nodes ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188 ARM: dts: rockchip: add Cortex-A9 SPI controller nodes ARM: dts: rockchip: enable usb ports on Radxa Rock ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188 ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0 ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808 ARM: dts: Add rk808 PMIC to rk3288-evb-rk808 ARM: dts: Add mshc aliases for rk3288 ARM: dts: Add SPI nodes to rk3288 ARM: dts: Enable USB host1(dwc) on rk3288-evb ARM: dts: add rk3288 dwc2 controller support ARM: dts: Add sdio0 and sdio1 to the rk3288 Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt Merge "qcom DT changes for v3.18-2" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18-2 * Added SDCC nodes on MSM8960/CDP and MSM8660/SURF * Added I2C and SDCC4/WLAN on APQ8064/IFC6410 * Added I2C on MSM8984/DB8074 * tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: DT: msm8960: Add sdcc nodes ARM: DT: msm8660: Add sdcc nodes ARM: DT: apq8064: Add i2c device nodes ARM: DT: apq8064: add support to sdcc4 for wlan. ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board Signed-off-by:
-
Olof Johansson authored
Merge tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt Merge "qcom DT changes for v3.18" from Kumar Gala: Qualcomm ARM Based Device Tree Updates for v3.18 * Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board * Added IPQ8064 dt support for basic SoC and AP148 board * Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks * Added PMIC 8058 dt support on MSM8660, enables PMIC based power key, keypad, rtc, and vibrator * Added PMIC 8921 dt support on MSM8960, enables PMIC based power key, keypad, and rtc * tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: ARM: DT: QCOM: apq8064: Add dma support for sdcc node ARM: DT: apq8064: Add sdcc support via mcci driver. ARM: dts: qcom: Add 8064 multimedia clock controller node ARM: DT: APQ8064: Add node for ps_hold function in pinctrl ARM: DT: APQ8064: Add pinctrl support ARM: dts: qcom: Add TLMM DT node for APQ8084 ARM: dts: qcom: Add initial IFC6540 board device tree ARM: dts: msm: Add 8058 PMIC to ssbi bus ARM: dts: msm: Add 8921 PMIC to ssbi bus ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees ARM: dts: qcom: Add APQ8084 serial port DT node ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node Signed-off-by:
-
Olof Johansson authored
Merge tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.18 merge window" from Tony Lindgren: Changes for .dts files for omaps for v3.18 merge window: - Updates for gta04 to add gta04a3 model - Add support for Tehnexion TAO3530 boards - Regulator names for beaglebone - Pinctrl related updates for omap5, dra7 and am437 - Model name fix for sbc-t54 - Enable mailbox for various omaps * tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits) ARM: dts: OMAP2+: Add sub mailboxes device node information ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART ARM: dts: AM437x: switch to compatible pinctrl ARM: dts: DRA7: switch to compatible pinctrl ARM: dts: OMAP5: switch to compatible pinctrl ARM: dts: am335x-boneblack: Add names for remaining regulators ARM: dts: sbc-t54: fix model property ARM: dts: omap5.dtsi: add DSS RFBI node ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based) ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based) ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock ARM: OMAP2+: board-generic: add support for AM57xx family ARM: dts: dra72-evm: Add tps65917 PMIC node ARM: dts: dra72-evm: Enable I2C1 node Linux 3.17-rc3 unicore32: Fix build error vexpress/spc: fix a build warning on array bounds spi: sh-msiof: Fix transmit-only DMA transfers ... Signed-off-by:
-
- 22 Sep, 2014 3 commits
-
-
Stephen Boyd authored
Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Kumar Gala <galak@codeaurora.org>
-
Stephen Boyd authored
Add the sdcc nodes to support the SD card controller using pl180 mmci driver. We also add a temporary fixed regulator until the regulator driver is mainlined. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Romain Perier authored
On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver enables this regulator when the device driver is loaded. The phy no longer needs to be always on. Signed-off-by:
Romain Perier <romain.perier@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de>
-
- 17 Sep, 2014 3 commits
-
-
kiran.padwal@smartplayin.com authored
This patch adds i2c pinctrl DT node for IFC6410 board. It also adds necessary DT support for i2c eeprom which is present on IFC6410. Signed-off-by:
Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by:
-
Srinivas Kandagatla authored
This patch adds sdcc4 node to enable wlan support on IFC6410 Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
kiran.padwal@smartplayin.com authored
Add support for i2c controller on the DB8074 board. It also adds necessary DT support for i2c eeprom which is present on DB8074 board. Signed-off-by:
-
- 16 Sep, 2014 21 commits
-
-
Heiko Stuebner authored
Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference the pcfg_pull_default setting that is not available on rk3188. Reported-by:
Naoki FUKAUMI <naobsd@gmail.com> Signed-off-by:
-
Heiko Stuebner authored
The host and otg regulator pinctrl settings got swapped, making the host reference the otg pinctrl and the other way round. The actual pins are correct (gpio0-3 for host and gpio2-31 for otg). Reported-by:
-
Anson Huang authored
Original gpt per clk parent is from ipg_per clk which may be scaled when system enter low bus mode, as ipg clk will be lower in low bus mode, to keep system clk NOT drift, select gpt per clk parent from OSC which is at fixed freq always. On i.mx6qdl, add a osc_per clk source for i.mx6q TO > 1.0 and all i.MX6dl SoC. On i.mx6sx, just make gpt per clk from OSC. Signed-off-by:
Anson Huang <b20788@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@freescale.com>
-
Tim Harvey authored
The GW52xx baseboard supports CANbus so we enable it, configure its pinmux and CAN_STBY gpio. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Signed-off-by:
-
Tim Harvey authored
Follow the conventions for pinctrl: - grouping pinctrl in logical alphabatized groups - remove any pinctrl not being used by a driver or needed by user - move iomuxc to bottom of file for readability Signed-off-by:
-
Tim Harvey authored
Follow the convention of configuring padconf for all pins and not leaving any 0x80000000 to leave them un-configured. Signed-off-by:
-
Tim Harvey authored
Use the gpio contants defined in bindings for active high/low Signed-off-by:
-
Tim Harvey authored
Remove aliases that are either not used by bootloader or are provided via included dtsi files. Signed-off-by:
-
Tim Harvey authored
The general device-tree rule is to not include nodes that do not have a driver or bindings in a dts/dtsi. Remove the place-holder nodes from the Gateworks Ventana boards until a time that a driver with proper bindings exists. Signed-off-by:
-
Lothar Waßmann authored
This alias is used by U-Boot to enable/disable the regulator depending on baseboard type. Signed-off-by:
Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by:
-
Lothar Waßmann authored
The spi-mxs driver does not allow full duplex SPI transfers. The spi-gpio driver may be used as an alternative if this is required. Make the choice between those drivers easier for the end user by providing settings for both drivers. Signed-off-by:
-
Lothar Waßmann authored
Signed-off-by:
-
Lothar Waßmann authored
The labels on the spidev nodes are not used and not required, so remove them. The TX28 supports 3 chipselects on the SPI interface. Make all those chipselects available to the user. Signed-off-by:
-
Shengjiu Wang authored
Baud clock is used for bit clock generation in master mode. Ipg clock is peripheral clock and peripheral access clock. Signed-off-by:
Shengjiu Wang <shengjiu.wang@freescale.com> Signed-off-by:
-
Shengjiu Wang authored
Baud clock is used for bit clock generation in master mode. Ipg clock is peripheral clock and peripheral access clock. Signed-off-by:
-
Fabio Estevam authored
Passing '0x80000000' to the pin configuration means that kernel will skip the IOMUXC_SW_PAD_CTL configuration and will use whathever values come from the bootloader. Instead of relying on the bootloader setup, let's configure it in the kernel to have predictable settings. '0x1b0b0' is the default POR value for all these pins and has also been verified that the pins are using this value by manually inspecting the IOMUXC_SW_PAD_CTL registers, so no functional change has been made. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Fabio Estevam authored
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by:
-
Fabio Estevam authored
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by:
-
Fabio Estevam authored
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by:
-
Fabio Estevam authored
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the warning. Signed-off-by:
-
Fabio Estevam authored
The lcdif node has a property named "display" and also a child node called "display", which causes the following warning: device-tree: Duplicate name in lcdif@80030000, renamed to "display#1" Rename the child node name in order to avoid the wa Signed-off-by:
-
