- 03 Sep, 2015 40 commits
-
-
Viresh Kumar authored
Migrate sni driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10612/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Viresh Kumar authored
Migrate sgidriver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Viresh Kumar authored
Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate loongsoon32 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate loongson driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. [ralf@linux-mips.org: Folded in Viresh's followon fix.] Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-txx9 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-rsb1250 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-4k driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-gt641xx driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-ds1287 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-bcm1480 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Read operation on R_SCD_TIMER_CFG and R_SCD_TIMER_INIT registers isn't performed now for many modes as there returned values aren't used. Signed-off-by:
-
Viresh Kumar authored
Migrate jz4740 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate jazz driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Viresh Kumar authored
Migrate alchemy driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
James Hogan authored
The generic field definitions (i.e. present before MIPS32/MIPS64) in mipsregs.h are conventionally not prefixed with MIPS_, so rename the recently added MIPS_ENTRYLO_* definitions for the G, V, D, and C fields to ENTRYLO_*. Also rearrange to put the EntryLo and EntryHi definitions in the right place in the file. Fixes: 8ab6abcb ("MIPS: mipsregs.h: Add EntryLo bit definitions") Reported-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10725/Signed-off-by:
-
James Hogan authored
The FrameMask register is relevant to the TLB so it should be dumped by dump_tlb_regs(), however it is only present in certain cores (r10000, r12000, r14000, r16000). Add dumping of it, conditional upon current_cpu_type(). Suggested-by:
Joshua Kinard <kumba@gentoo.org> Suggested-by:
-
James Hogan authored
The PageGrain register may not exist if certain architectural features aren't present, therefore only print out its value when dumping the TLB registers if it is expected to contain fields relevant to the TLB. Fixes: d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") Reported-by:
-
James Hogan authored
Probe Config3 for small page support. This will be useful to give clues as to whether the PageGrain register exists. Signed-off-by:
-
James Hogan authored
The TLB registers are dumped in a couble of places: - sysrq_tlbdump_single() - when dumping TLB state. - do_mcheck() - in response to a machine check error. The main TLB registers also differ between r3k and r4k, but r4k appears to be assumed. Refactor this code into a dump_tlb_regs() function, implemented for both r3k and r4k, and used by both of the above functions. Fixes: d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") Suggested-by:
-
James Hogan authored
Commit d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") added the 'x' sysrq key for dumping MIPS TLB entries, but didn't document it in Documentation/sysrq.txt. Add mention of the MIPS use of the 'x' SysRq key. Reported-by:
Jonathan Corbet <corbet@lwn.net> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-doc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10720/Signed-off-by:
-
Markos Chandras authored
Commit c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") added support for emulating the new R6 BC1{EQ,NE}Z branches but it missed the case where the instruction that caused the exception was not on a DS. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10738/Signed-off-by:
-
Markos Chandras authored
The mfhc/mthc instructions are supported on MIPS R6 so emulate them if needed. Signed-off-by:
-
Markos Chandras authored
Fix indentation for the final 'else' blocks. Signed-off-by:
-
Markos Chandras authored
The double format (d_fmt) case uses an opening bracket which then closes at the end of the word format (w_fmt). This can be rather confusing so add the closing bracket at the end of the d_fmt case and use another one for the w_fmt one. Signed-off-by:
-
Markos Chandras authored
The MIPS R6 ISA support has been part of mainline since v4.0 and it should be in a good shape nowadays so it is not an experimental feature anymore. Signed-off-by:
-
Ralf Baechle authored
These are bitfields and treating them as signed values doesn't make any sense. Signed-off-by:
Chris Packham <judge.packham@gmail.com>
-
Chris Packham authored
Update __read_32bit_c0_register() and __read_32bit_c0_ctrl_register() to use "unsigned int res;" instead of "int res;". There is little reason to treat these register values as signed. They are either counters (which by definition are unsigned) or are made up of various bit fields to be interpreted as per the CPU datasheet. This has come up via u-boot[1] which sync's asm/mipsregs.h with the kernel. In u-boots case the value read from read_c0_count() is assigned to an unsigned long [2] which triggers a sign extension and causes a bug. U-boot should probably be more explicit about the types used for the timer_read_counter() API but that aside is there any reason to treat these values as signed integers? A quick grep around the arch/mips makes me thing that there may be some bugs lurking when read_c0_count() starts to yield a negative value but I haven't really explored any of them. [1] - http://lists.denx.de/pipermail/u-boot/2015-July/219086.html [2] - http://git.denx.de/?p=u-boot.git;a=blob;f=arch/mips/cpu/time.c#l11Signed-off-by:
-
Paul Burton authored
The default implementation of platform_maar_init is sufficient for Malta boards where we want to allow speculation in the regions of memory corresponding to DDR & disallow it elsewhere. Drop the custom implementation such that the default is used, reducing the duplication of information provided by the Malta platform code. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/10677/Signed-off-by:
-
Paul Burton authored
Introduce a default weak implementation of platform_maar_init which makes use of the data that platforms already provide to the bootmem allocator. This should hopefully cover the most common configurations, reduce the duplication of information provided by platforms & leaves platforms with the option of providing a custom implementation if required. Signed-off-by:
-
Leonid Yegoshin authored
The MSA architecture specification allows for hardware to not implement unaligned vector memory accesses in some or all cases. A typical example of this is the I6400 core which does not implement unaligned vector memory access when the memory crosses a page boundary. The architecture also requires that such memory accesses complete successfully as far as userland is concerned, so the kernel is required to emulate them. This patch implements support for emulating unaligned MSA ld & st instructions by copying between the user memory & the tasks FP context in struct thread_struct, updating hardware registers from there as appropriate in order to avoid saving & restoring the entire vector context for each unaligned memory access. Tested both using an I6400 CPU and with a QEMU build hacked to produce AdEL exceptions for unaligned vector memory accesses. [paul.burton@imgtec.com: - Remove #ifdef's - Move msa_op into enum major_op rather than #define - Replace msa_{to,from}_wd with {read,write}_msa_wr_{b,h,w,l} and the format-agnostic wrappers, removing the custom endian mangling for big endian systems. - Restructure the msa_op case in emulate_load_store_insn to share more code between the load & store cases. - Avoid the need for a temporary union fpureg on the stack by simply reusing the already suitably aligned context in struct thread_struct. - Use sizeof(*fpr) rather than hardcoding 16 as the size for user memory checks & copies. - Stop recalculating the address of the unaligned vector memory access and rely upon the value read from BadVAddr as we do for other unaligned memory access instructions. - Drop the now unused val8 & val16 fields in union fpureg. - Rewrite commit message. - General formatting cleanups.] Signed-off-by: -
Paul Burton authored
Introduce accessor functions allowing the kernel to access arbitrary vector registers using an arbitrary data format. The accessors are implemented in assembly, using macros to avoid massive duplication, in order to make use of the existing support for MSA with & without toolchain support. The accessors will be used in a later patch. Signed-off-by:
-
Leonid Yegoshin authored
Declare a struct describing the MSA MI10 instruction format used for ld & st instructions, for use by subsequent patches. Signed-off-by:
-
Bjorn Helgaas authored
"__weak" is defined in include/linux/compiler-gcc.h. We shouldn't need an arch-specific definition. Remove the "__weak" definition from arch/mips/include/asm/linkage.h. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
-
Bjorn Helgaas authored
Weak header file declarations are error-prone because they make every definition weak, and the linker chooses one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). mips_cdmm_phys_base() is defined only in arch/mips/mti-malta/malta-memory.c so there's no problem with multiple definitions. But it works better to have a weak default implementation and allow a strong function to override it. Then we don't have to test whether a definition is present, and if there are ever multiple strong definitions, we get a link error instead of calling a random definition. Add a weak mips_cdmm_phys_base() definition and remove the weak annotation from the declaration in arch/mips/include/asm/cdmm.h. Signed-off-by:
-
Bjorn Helgaas authored
Weak header file declarations are error-prone because they make every definition weak, and the linker chooses one based on link order (see 10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). The most elegant solution is to have a weak default implementation and allow a strong function to override it. Then we don't have to test whether a definition is present, and if there are ever multiple strong definitions, we get a link error instead of calling a random definition. Add a weak get_c0_fdc_int() definition with the default code and remove the weak annotation from the declaration. Signed-off-by:
-
