- 03 Aug, 2019 16 commits
-
-
Wen He authored
This patch use the optional property node "arm,malidp-arqos-value" to can be dynamic configure QoS signaling. Signed-off-by: Wen He <wen.he_1@nxp.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Manivannan Sadhasivam authored
Add support for i.MX8QXP AI_ML board from Einfochips. This board is one of the Consumer Edition boards of the 96Boards family based on i.MX8QXP SoC from NXP/Freescale. The initial support includes following peripherals which are tested and known to be working: 1. Debug serial via UART2 2. uSD 3. WiFi 4. Ethernet More information about this board can be found in Arrow website: https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-toolsSigned-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
All these at803x properties are not documented anywhere, so just remove them. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Pramod Kumar authored
ls1046afrwy board is based on nxp ls1046a SoC. Board support's 4GB ddr memory, i2c, microSD card, serial console,qspi nor flash,ifc nand flash,qsgmii network interface, usb 3.0 and serdes interface to support two x1gen3 pcie interface. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lucas Stach authored
Add the charge controller node. With the controller driver loaded the VBUS of the user USB socket is controlled exclusively via i2c with the GPIO controls ignored, so vbus-supply for the user USB port must be linked to the charge controller. Hog the previously used GPIO control to unconditionally enable VBUS until the driver is loaded. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Li Jun authored
The correct clock for "bus_early", "ref", "suspend" should be: IMX8MQ_CLK_USB1_CTRL_ROOT, IMX8MQ_CLK_USB_CORE_REF, IMX8MQ_CLK_32K, especially we may need the right suspend clock rate to set register in controller driver. Signed-off-by: Li Jun <jun.li@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
i.MX8MQ has clock gate for TMU module, add clock info to TMU node for clock management. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
According to latest datasheet (Rev.1, 10/2018) from below links, in the consumer datasheet, 1.5GHz is mentioned as highest opp but depends on speed grading fuse, and in the industrial datasheet, 1.3GHz is mentioned as highest opp but depends on speed grading fuse. 1.5GHz and 1.3GHz opp use same voltage, so no need for consumer part to support 1.3GHz opp, with same voltage, CPU should run at highest frequency in order to go into idle as quick as possible, this can save power. That means for consumer part, 1GHz/1.5GHz are supported, for industrial part, 800MHz/1.3GHz are supported, and then check the speed grading fuse to limit the highest CPU frequency further. Correct the market segment bits in opp table to make them work according to datasheets. https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQIEC.pdf https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQCEC.pdf Fixes: 12629c5c ("arm64: dts: imx8mq: Add cpu speed grading and all OPPs") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
According to latest datasheet (Rev.0.2, 04/2019) from below links, 1.8GHz is ONLY available for consumer part, so the market segment bits for 1.8GHz opp should ONLY available for consumer part accordingly. https://www.nxp.com/docs/en/data-sheet/IMX8MMIEC.pdf https://www.nxp.com/docs/en/data-sheet/IMX8MMCEC.pdf Fixes: f403a26c (arm64: dts: imx8mm: Add cpu speed grading and all OPPs) Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
i.MX8MM can reuse i.MX8MQ's src driver, add "fsl,imx8mq-src" as src's fallback compatible to enable it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Leonard Crestez authored
The same ddr perfomance counter IP from 8qxp is also available on imx8m series so add it to dts. Tested with `perf stat` and `memtester` on imx8mm-evk and obtained plausible results. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Frank Li <frank.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Li Jun authored
USB1 port has typec connector with power delivery support: - Dual data role: host and device. - Dual power role: source and sink, prefer power sink. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Li Jun authored
Since IMX8MM_CLK_USB_CORE_REF is not used at all, so remove the setting for it. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Add "gpio-ranges" property to establish connections between GPIOs and PINs on i.MX8MM pinctrl driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Add "gpio-ranges" property to establish connections between GPIOs and PINs on i.MX8MQ pinctrl driver. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Abel Vesa authored
Add the initial configuration for clocks that need default parent and rate setting. This is based on the vendor tree clock provider parents and rates configuration except this is doing the setup in dts rather than using clock consumer API in a clock provider driver. Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 22 Jul, 2019 2 commits
-
-
Guido Günther authored
This enables the Mixel MIPI D-PHY on the Librem 5 devkit Signed-off-by: Guido Günther <agx@sigxcpu.org> Acked-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Guido Günther authored
Add a node for the Mixel MIPI D-PHY, "disabled" by default. Signed-off-by: Guido Günther <agx@sigxcpu.org> Acked-by: Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 21 Jul, 2019 15 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
Rob Herring authored
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e6 ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3f ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937 ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
Rob Herring authored
Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
-
- 20 Jul, 2019 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates from Thomas Gleixner: "A set of perf improvements and fixes: perf db-export: - Improvements in how COMM details are exported to databases for post processing and use in the sql-viewer.py UI. - Export switch events to the database. BPF: - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just like selftests/bpf/bpf_rlimit.h do, which makes errors due to exhaustion of this limit, which are kinda cryptic (EPERM sometimes) less frequent. perf version: - Fix segfault due to missing OPT_END(), noticed on PowerPC. perf vendor events: - Add JSON files for IBM s/390 machine type 8561. perf cs-etm (ARM): - Fix two cases of error returns not bing done properly: Invalid ERR_PTR() use and loss of propagation error codes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) perf version: Fix segfault due to missing OPT_END() perf vendor events s390: Add JSON files for machine type 8561 perf cs-etm: Return errcode in cs_etm__process_auxtrace_info() perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info perf scripts python: export-to-postgresql.py: Export switch events perf scripts python: export-to-sqlite.py: Export switch events perf db-export: Export switch events perf db-export: Factor out db_export__threads() perf script: Add scripting operation process_switch() perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons perf scripts python: export-to-postgresql.py: Add has_calls column to comms table perf scripts python: export-to-sqlite.py: Add has_calls column to comms table perf db-export: Also export thread's current comm perf db-export: Factor out db_export__comm() perf scripts python: export-to-postgresql.py: Export comm details perf scripts python: export-to-sqlite.py: Export comm details perf db-export: Export comm details perf db-export: Fix a white space issue in db_export__sample() perf db-export: Move export__comm_thread into db_export__sample() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp fix from Thomas Gleixner: "Add warnings to the smp function calls so callers from wrong contexts get detected" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Warn on function calls from softirq context
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner: "The real-time preemption patch set exists for almost 15 years now and while the vast majority of infrastructure and enhancements have found their way into the mainline kernel, the final integration of RT is still missing. Over the course of the last few years, we have worked on reducing the intrusivenness of the RT patches by refactoring kernel infrastructure to be more real-time friendly. Almost all of these changes were benefitial to the mainline kernel on their own, so there was no objection to integrate them. Though except for the still ongoing printk refactoring, the remaining changes which are required to make RT a first class mainline citizen are not longer arguable as immediately beneficial for the mainline kernel. Most of them are either reordering code flows or adding RT specific functionality. But this now has hit a wall and turned into a classic hen and egg problem: Maintainers are rightfully wary vs. these changes as they make only sense if the final integration of RT into the mainline kernel takes place. Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT will be fully integrated into the mainline kernel. The final integration of the missing bits and pieces will be of course done with the same careful approach as we have used in the past. While I'm aware that you are not entirely enthusiastic about that, I think that RT should receive the same treatment as any other widely used out of tree functionality, which we have accepted into mainline over the years. RT has become the de-facto standard real-time enhancement and is shipped by enterprise, embedded and community distros. It's in use throughout a wide range of industries: telecommunications, industrial automation, professional audio, medical devices, data acquisition, automotive - just to name a few major use cases. RT development is backed by a Linuxfoundation project which is supported by major stakeholders of this technology. The funding will continue over the actual inclusion into mainline to make sure that the functionality is neither introducing regressions, regressing itself, nor becomes subject to bitrot. There is also a lifely user community around RT as well, so contrary to the grim situation 5 years ago, it's a healthy project. As RT is still a good vehicle to exercise rarely used code paths and to detect hard to trigger issues, you could at least view it as a QA tool if nothing else" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT
-