- 28 Mar, 2015 1 commit
-
-
Linus Walleij authored
This adds support for the LIS3LV02 accelerometer found in the ST Microelectronics Nomadik board series. Cc: devicetree@vger.kernel.org Cc: Denis CIOCCA <denis.ciocca@st.com> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
- 24 Mar, 2015 28 commits
-
-
Geert Uytterhoeven authored
Gcc < 4.3 doesn't understand binary constants (0b*): drivers/staging/fbtft/fbtft-sysfs.c:156:19: error: invalid suffix "b111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:3: error: invalid suffix "b1111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:11: error: invalid suffix "b1111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:19: error: invalid suffix "b11111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:28: error: invalid suffix "b1111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:36: error: invalid suffix "b1111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:44: error: invalid suffix "b1111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:159:52: error: invalid suffix "b11111" on integer constant drivers/staging/fbtft/fb_hx8340bn.c:160:3: error: invalid suffix "b111" on integer constant ... Hence use hexadecimal constants (0x*) instead. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.1a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new drivers, cleanups and functionality for IIO in the 4.1 cycle. New drivers * CM3323 color sensor. * MS5611 pressure and temperature sensor. New functionality * mup6050 - create mux clients for devices described via ACPI. The reasoning and approach taken in this patch are complex. Basically there is no otherway of finding out what is there than by some esoteric look ups in the ACPI data. * cm3232 - PM support * itg3200 - suspend/resume support * mcp320x - add more ADCs to the kconfig to reflect what the driver supports (this patch and the bindings got left behind when the support was added a while back). Docs / utils * ti-adc128s052 - DT bindings. * mcp3422 - DT bindings. * mcp320x - DT bindings * ABI docs for event threshold scale attributes, in_magn_offset, proximity scan_element and thresh falling/rising values for accelerometers. All elements long in use that have slipped by being explicitly documented. * Tidy up the tools previously in drivers/staging/iio/Documentation and move them out to /tools/iio. Yet another move that should have happened long ago. This time Roberta Dobrescu did the leg work. Thanks! Core Cleanups * Export userspace IIO headers. We should have done the appropriate header splitting a long time ago. Thanks to Daniel for sorting this out. * Refactor the registring of attributes for buffers to move all non-custom ones to a vector allowing easier additions to the current set in the future. Driver Cleanups * gpiod related cleanups. Make use of the additional parameter to specify initial direciton to avoid extra code. * bmc150 - Various refactorings to reduce code repitition and prepare for hardware buffer support. Some of these cleanups are good even without the new functionality. * kmx61 - direct use of index to an array avoiding a structure element which was always the index to an element in an array of that structure. * vf610 - avoid incorrect type for return from wait_for_completion_timeout. * gp2ap020a00f - use put_unaligned_le32 for slight code simplification. * ade7754 - improve error handling including suppressing some build warnings. * ade7759 - improve error handling including suppressing some build warnings. * hmc5843 - Long line and indentation fixes. Also some constifying of various constant data. * ade7854 - 80+ character line splitting. * ad2s1210 - fix wrong printf format string. * mxs-lradc - fix wrong printf format string. * ade7954-i2c - code alignment fixes and other trivial but worthwhile bits. * periodic rtc trigger - make the frequency type an unsigned int as it is always treated as such. * jsa1212 - constify struct regmap_config as it is constant. * ad7793 - typo in the MODULE_DESCRIPTION * mma9551 - check gpiod_to_irq errors. Note that this doesn't actually cause any trouble but is worth tidying up as obviously incorrect. * mlx90614 - refactor the register symbols to make it clear which reads are to RAM not PROM.
-
Giedrius Statkevičius authored
Remove redundant blank lines, move absolute include after relative include. Signed-off-by:
Giedrius Statkevičius <giedrius.statkevicius@gmail.com> Signed-off-by:
-
Giedrius Statkevičius authored
Remove unused defines from dgnc_cls.h Signed-off-by:
-
Giedrius Statkevičius authored
dgnc_kcompat.h contains some old legacy defines in case the kernel doesn't have __user defined but for current kernel versions these defines don't make sense and are useless so remove them. Move the TTY_FLIPBUF_SIZE define to digi.h because it's used in the code. Signed-off-by:
-
Giedrius Statkevičius authored
Dgnc_types.h unnecesarily defines TRUE as 1 and FALSE as 0 because we already have a widely used linux/types.h so convert all TRUE to true, FALSE to false and edit the dgnc_board struct to make sure it uses "bool". Signed-off-by:
-
Giedrius Statkevičius authored
Dpacompat.h contained a lot of unused #defines and only few things are used from it so since we've trimmed down digi.h, now we can delete dpacompat.h and move remaining stuff into digi.h. Signed-off-by:
-
Giedrius Statkevičius authored
Remove a lot of unused structs and defines from digi.h. We still have to be careful with TIOCM_LE and TIOCMSET/TIOCMBIC because termios.h and ioctls.h respectfully redefine them. Signed-off-by:
-
Giedrius Statkevičius authored
dgnc_ioctl_name() is never used anywhere so remove it Signed-off-by:
-
Dan Carpenter authored
"dgnc_NumBoards" is the number of filled out elements in the dgnc_Board[] array. "->nasync" and "->maxports" are the same value. They are the number of channels in the ->channels[] array so these tests should be ">=" instead of ">" so we avoid reading past the end of the arrays. I cleaned up the conditions in dgnc_mgmt_ioctl() a bit. There was a work around for the off by one bug in the case where there were no boards which is no longer needed. "channel" is unsigned so it can't be negative. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Aaro Koskinen authored
Eliminate extra indentation by putting all the code into the same block. Also delete a bogus comment. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Aaro Koskinen authored
On some hardware the USB fails to initialize to sane state after cold boot. We can detect this based on some unexpected interrupt bits, and recover by re-initializing. Signed-off-by:
-
Aaro Koskinen authored
Fail and WARN if DMA counters are wrong. Signed-off-by:
-
Aaro Koskinen authored
Move cvmx_usb_shutdown() to allow its use from some other functions. Signed-off-by:
-
Aaro Koskinen authored
Don't disable port before resetting. Also perform reset unconditionally when requested. Signed-off-by:
-
Aaro Koskinen authored
Move FIFO setup to controller reset from port reset. Signed-off-by:
-
Aaro Koskinen authored
Move FIFO setup into a separate routine. Signed-off-by:
-
Aaro Koskinen authored
Use USB stack to turn on the power bit. It will also do the necessary delays. Signed-off-by:
-
Aaro Koskinen authored
Don't poll interrupts before we have registered the HCD. Signed-off-by:
-
Aaro Koskinen authored
Move one-time state data structure initialization out of cvmx_usb_initialize(). This enables to re-initialize USBN HW block without messing up data structures. Signed-off-by:
-
Aaro Koskinen authored
Never retry after xacterr. The DMA engine cannot handle that properly and may result in wrong transfer count and hang. Signed-off-by:
-
Aaro Koskinen authored
Program DMA engine based on transfer direction. We are only transferring to one direction at a time. Signed-off-by:
-
Aaro Koskinen authored
Use __BITFIELD_FIELD to define bitfields. OCTEON can at least in theory run also in little-endian mode, so the bitfield definitions should not assume big-endian byte order. Signed-off-by:
-
Aaro Koskinen authored
Since we are not moving/realigning the original pointer returned by kmalloc, we don't need to store the value in a separate field. Signed-off-by:
-
Aaro Koskinen authored
Remove useless prefix from pipe flags and adjust comments. Signed-off-by:
-
Aaro Koskinen authored
Original CVMX code used "__" to distinguis internal USB functions from public ones. But in Linux all cvmx_usb routines are internal to this driver, so such separation is useless. Signed-off-by:
-
Aaro Koskinen authored
Eliminate 64-bit register access wrappers. Since we don't implement register-level debugging outputs, these are useless. Signed-off-by:
-
Aaro Koskinen authored
Remove some function parameter sanity checks from internal functions where we can rely them being called with sane parameters. Signed-off-by:
-
- 23 Mar, 2015 11 commits
-
-
Cristina Opriceana authored
Remove function prototype from r8192U_core.c since it is declared in the r8192U.h header and this is included in r8192U_core.c Signed-off-by:
Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by:
-
Cristina Opriceana authored
Make functions static since they are used locally and no other files refer them. Signed-off-by:
-
Haneen Mohammed authored
Context is used in dev_info after it has been freed. This patch fix that issue by removing the dev_info itself, for msg doesn't look much necessary. Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
-
Somya Anand authored
This patch fixes the following sparse warning: warning: symbol 'rtw_atimdone_event_callback23a' was not declared. Should it be static? rtw_atimdone_event_callback23a is local to the file rtw_mlme.c but it isn't exposed in a header file anywhere. Moreover it is never called from anywhere as well. So, this patch removes this function completely. Signed-off-by:
Somya Anand <somyaanand214@gmail.com> Signed-off-by:
-
Vatika Harlalka authored
Remove typedef prism2sta_accesslist_t and replace its uses in the code. Signed-off-by:
Vatika Harlalka <vatikaharlalka@gmail.com> Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
Signed-off-by:
-
Jes Sorensen authored
In 7c3a8f2a I made a mistake and moved a break below a bracket, causing a situation where the for loop would always exit when it shouldn't. This patch corrects that mistake. Signed-off-by:
-
Vatika Harlalka authored
Remove typdef prism2sta_authlist_t and replace its uses in the code. Signed-off-by:
-
Hatice ERTÜRK authored
Deleted spaces before ','.Because it is prohibited by the kernel coding style. Error found with checkpatch.pl Signed-off-by:
Hatice ERTURK <haticeerturk27@gmail.com> Signed-off-by:
-
