- 22 May, 2007 5 commits
-
-
Dave Jones authored
There are several cases where the fusion driver uses the logical || to try to do an arithmetical or ... fix by replacing with |. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
"Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Darrick J. Wong authored
Every so often, the driver will call asd_clear_nexus to clean out a task. It is supposed to be the case that the CLEAR NEXUS does not go on the done list until after the task itself has been put on the done list, but for some reason this doesn't always happen. Thus, the wait_for_completion_timeout call times out, and we return success. This makes libsas free the task even though the task hasn't completed, leading to a BUG_ON message from aic94xx_hwi.c around line 341. We should return failure from asd_clear_nexus so that libsas tries again; at a bare minimum it shouldn't be freeing active tasks. I _think_ this will fix one of the SCB timeout crash problems (though I've not been able to reproduce it lately...) Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Signed-off-by:
-
James Bottomley authored
On Tue, 2007-05-22 at 06:51 -0500, Bob Tracy wrote: > Second try: originally reported this back on April 17th. 2.6.X > kernel builds started failing after I upgraded my compiler from > gcc-3.3.X to gcc-3.4.6: > > make -C drivers/scsi/aic7xxx/aicasm > (...) > gcc -I/usr/include -I. aicasm.c aicasm_symbol.c aicasm_gram.c aicasm_macro_gram.c aicasm_scan.c aicasm_macro_scan.c -o aicasm -ldb > aicasm_gram.y:1948: error: conflicting types for 'yyerror' > aicasm_gram.tab.c:3004: error: previous implicit declaration of 'yyerror' was here > aicasm_macro_gram.y:162: error: conflicting types for 'mmerror' > aicasm_macro_gram.tab.c:1196: error: previous implicit declaration of 'mmerror' was here Fix is to add a prototype for yyerror and mmerror to the relevant files. Signed-off-by: -
Salyzyn, Mark authored
Under some conditions associated with the unclean transition to kdump, the aacraid adapters will view the array as foreign and not export it to prevent access and data manipulation. The solution is to submit a commit configuration to export the devices since this is a expected behavior when transitioning to a kdump kernel. This patch adds the aacraid.reset_devices flag and when either this or the global reset_devices flag is set, ensures that a commit config is issued and extends the startup_timeout if it is set less than 5 minutes. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Alan Stern authored
This patch (as909) fixes a couple of refcounting errors in the sd driver's suspend and resume methods. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 16 May, 2007 25 commits
-
-
James Bottomley authored
Unable to handle kernel paging request at ffff8101c0000000 RIP: [<ffffffff880b22a1>] :aacraid:aac_internal_transfer+0xd6/0xe3 PGD 8063 PUD 0 Oops: 0000 [1] SMP last sysfs file: /block/sdb/removable CPU 2 Modules linked in: autofs4(U) hidp(U) nfs(U) lockd(U) fscache(U) nfs_acl(U) rfcomm(U) l2cap(U) bluetooth(U) sunrpc(U) ipv6(U) cpufreq_ondemand(U) dm_mirror(U) dm_mod(U) video(U) sbs(U) i2c_ec(U) button(U) battery(U) asus_acpi(U) acpi_memhotplug(U) ac(U) parport_pc(U) lp(U) parport(U) joydev(U) ide_cd(U) i2c_i801(U) i2c_core(U) shpchp(U) cdrom(U) bnx2(U) sg(U) pcspkr(U) ata_piix(U) libata(U) aacraid(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) ehci_hcd(U) ohci_hcd(U) uhci_hcd(U) Pid: 2352, comm: syslogd Not tainted 2.6.18-prep #1 RIP: 0010:[<ffffffff880b22a1>] [<ffffffff880b22a1>] :aacraid:aac_internal_transfer+0xd6/0xe3 RSP: 0000:ffff8101bfd1fe68 EFLAGS: 00010083 RAX: 0000000000000063 RBX: 0000000000000008 RCX: 00000000ffd1fea0 RDX: ffffffff802da628 RSI: ffff8101c0000000 RDI: ffff8101b2a08168 RBP: ffff8101b2728010 R08: ffffffff802da628 R09: 0000000000000046 R10: 0000000000000000 R11: 0000000000000080 R12: 0000000000000010 R13: ffff8101bfd1fea8 R14: ffff8101bc74df58 R15: ffff8101bc74df58 FS: 00002aaaab0146f0(0000) GS:ffff8101bfcd2e40(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8101c0000000 CR3: 00000001bdecd000 CR4: 00000000000006e0 Process syslogd (pid: 2352, threadinfo ffff8101bc74c000, task ffff8101bd979040) Stack: 0000000000000012 0000000000000036 0000000000000000 ffff8101bee9a800 ffff8101be9d3a00 ffff8101be9d3a00 ffff8101be8014f8 ffffffff880b26cc 40212227607e3141 2029282a26252423 0000000000000003 ffff810037e3a000 Call Trace: <IRQ [<ffffffff880b26cc>] :aacraid:get_container_name_callback+0x8b/0xb5 [<ffffffff880b6f67>] :aacraid:aac_intr_normal+0x1b3/0x1f9 [<ffffffff880b8007>] :aacraid:aac_rkt_intr+0x37/0x115 [<ffffffff80099749>] __rcu_process_callbacks+0xf8/0x1a8 [<ffffffff80010705>] handle_IRQ_event+0x29/0x58 [<ffffffff800b2fe0>] __do_IRQ+0xa4/0x105 [<ffffffff80011c19>] __do_softirq+0x5e/0xd5 [<ffffffff8006a193>] do_IRQ+0xe7/0xf5 [<ffffffff8005b649>] ret_from_intr+0x0/0xa On digging into it, it turned out that the customer was probing an aacraid device with an INQUIRY of 8 bytes. The way aacraid works, it was blindly trying to use aac_internal_transfer to copy the container name to byte 16 of the inquiry data, resulting in a negative transfer length. It then copies over the whole of kernel memory before dropping off the end. Fix updated and corrected by Mark Salyzyn Signed-off-by: -
Salyzyn, Mark authored
[SCSI] aacraid: Correct sa platform support. (Was: [Bug 8469] Bad EIP value on pentium3 SMP kernel-2.6.21.1) http://bugzilla.kernel.org/show_bug.cgi?id=8469 As discussed in the bugzilla outlined below, we have an sa based (Mustang) RAID adapter on the system, a Dell PERC2/QC. Affected controllers are HP NetRAID, Adaptec AAC-364, Dell PERC2/QC or Adaptec 5400S. This problem coincides with the introduction of the adapter_comm and adapter_deliver platform functions (Message [PATCH 1/4] aacraid: rework communication support code, January 23 2007, which initially migrated to 2.6.21) The panic occurs with an uninitialized adapter_deliver platform function pointer. The enclosed patch, unmodified as tested by Rainer, solves the problem. Signed-off-by:
-
Christoph Hellwig authored
On Mon, Apr 30, 2007 at 03:16:39PM +0200, Geert Uytterhoeven wrote: > > +What: old NCR53C9x driver > > +When: October 2007 > > +Why: Replaced by the much better esp_scsi driver. Actual low-level > > + driver can ported over almost trivially. > ^ > be current linus' tree still has my spelling mistake. Here's a patch to update it Signed-off-by: -
FUJITA Tomonori authored
This sets sg_dma_len to a proper value. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
Sumant Patro authored
Update Maintainer email-id for MegaRAID SCSI drivers. Signed-off-by:
Sumant Patro <sumant.patro@lsi.com> Signed-off-by:
-
Ed Lin authored
Add debug information into abort and host_reset routine. Change ioremap to ioremap_nocache. Version updated to 3.6.0000.1. Signed-off-by:
Ed Lin <ed.lin@promise.com> Signed-off-by:
-
Ed Lin authored
After reset completed, the scsi error handler sends out TEST_UNIT_READY to the device. For 'normal' devices the command will be handled by firmware. However, because the RAID console only interfaces to scsi mid layer, the firmware will not process the command for it. This will make the console to be offlined right after reset. Add the handling in driver to fix this problem. Signed-off-by:
-
Ed Lin authored
During hard bus reset of st_shasta controllers, 1 ms is not enough for 16-port controllers, although it's good for 8-port controllers. Extend the wait time to 100 ms to allow bus resets finish successfully. Signed-off-by:
-
Ed Lin authored
The correct internal mapping of stex controllers should be: id:0~15, lun:0~7 (st_shasta) id:0, lun:0~127 (st_yosemite) id:0~127, lun:0 (st_vsc and st_vsc1) This patch reports the internal mapping to scsi mid layer, eliminating the translation between scsi mid layer and firmware. To achieve this goal, we also need to: -- fail the REPORT_LUNS command for st_shasta because the firmware is known to not report all actual luns -- add an entry in scsi_devindo.c to force sequential lun scan (for st_shasta controllers) -- fail the REPORT_LUNS command for console device -- remove special handling of REPORT_LUNS command for st_yosemite, as there is no translation mapping now Signed-off-by:
-
Brian King authored
Currently ipr always returns success from eh_dev_reset when called for a SATA device. If ata_do_eh is unable to recover for some reason, this can result in commands that are still outstanding when ata_do_eh returns. Change ipr to verify no commands are outstanding before returning success. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Michael Loehr authored
IO stall after deleting and path checker changes after reenabling zfcp device Setting one zfcp device offline using chccwdev in a multipath environment and waiting will lead to IO stall on all paths. After setting the zfcp device back online using chccwdev, the devices with io stall will have a different path checker. Devices corresponding to the deleted units are never freed. This has the effect that 'slave_destroy' is never called and zfcp still thinks that this unit is registered (ZFCP_STATUS_UNIT_REGISTERED is still set). Hence the erp routine is not called correctly and the unit is not enabled properly. Do not delete rport and the sdev. Just set the host to block on 'offline'. Setting host online again will then remove the blocked status and everything is fine again. Signed-off-by:
Michael Loehr <mloehr2@linux.vnet.ibm.com> Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Martin Peschke authored
avoid clutter in erp_dbf cleanup zfcp_fsf_req_dismiss functions: - avoid clutter in erp_dbf (reqs_active is always 0) - fold called three-line function into calling function - add meaningful comment - coding style Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Signed-off-by:
-
Al Viro authored
oprofile depends on having it Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
__NR_syscall_max is done in x86_64 asm-offsets; do an equivalent in uml kern_constants.h Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
it depends on elimination of unreachable branches in switch (by object size), so we must declare it always_inline Signed-off-by:
Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
.. because video-buf.c requires PCI, and VIDEO_EM28XX selects it. Signed-off-by:
-
Al Viro authored
Signed-off-by:
Jeff Garzik <jeff@garzik.org> Acked-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Al Viro authored
stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by:
-
Al Viro authored
need it for page_private(), not all targets have it pulled indirectly Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6: sh64: Add .gitignore entry for syscalltab. sh64: generic quicklist support. sh64: Update cayman defconfig. sh64: Fixup sh-sci build. sh64: ppoll/pselect6() and restartable syscalls. sh64: dma-mapping updates. sh64: Fixups for the irq_regs changes. sh64: Wire up many new syscalls. spelling fixes: arch/sh64/ sh64: ROUND_UP macro cleanup in arch/sh64/kernel/pci_sh5.c
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: Use menuconfig objects: IDE sl82c105: Switch to ref counting API ide: remove ide_use_dma() ide: add missing validity checks for identify words 62 and 63 ide: remove ide_dma_enable() sl82c105: add speedproc() method and MWDMA0/1 support cs5530/sc1200: add ->speedproc support cs5530/sc1200: DMA support cleanup ide: use ide_tune_dma() part #2 cs5530/sc1200: add ->udma_filter methods ide: always disable DMA before tuning it pdc202xx_new: use ide_tune_dma() alim15x3: use ide_tune_dma() sis5513: PIO mode setup fixes serverworks: PIO mode setup fixes pdc202xx_old: rewrite mode programming code (v2)
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: ucc_geth: eliminate max-speed, change interface-type to phy-connection-type smc911x: fix compilation breakage pasemi_mac: Fix local-mac-address parsing pasemi_mac: Terminate PCI ID list pasemi_mac: Interrupt ack fixes pasemi_mac: Fix register defines
-
Linus Torvalds authored
It's not necessarily a very sane configuration, but people running "make randconfig" noticed it wouldn't compile. This fixes some obvious problems in discontig.c to allow a clean compile. Acked-by:
andrew hendry <andrew.hendry@gmail.com> Signed-off-by:
-
- 15 May, 2007 10 commits
-
-
Jan Engelhardt authored
Use menuconfigs instead of menus, so the whole menu can be disabled at once instead of going through all options. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Alan Cox authored
Not sure how this one got missed in the great purge some time ago but it did. Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
ide_use_dma() duplicates a lot of ide_max_dma_mode() functionality and as all users of ide_use_dma() were converted to use ide_tune_dma() now it is possible to add missing checks to ide_tune_dma() and remove ide_use_dma() completely, so do it. There should be no functionality changes caused by this patch. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Check validity of identify words 62 and 63 before using them in ide_get_mode_mask(). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* check ->speedproc return value in ide_tune_dma() * use ide_tune_dma() in cmd64x/cs5530/sc1200/siimage/sl82c105/scc_pata drivers * remove no longer needed ide_dma_enable() Signed-off-by: -
Sergei Shtylyov authored
Add the speedproc() method for setting transfer modes, modify config_for_dma() to call it and use ide_max_dma_mode() to select the best DMA mode. Add support for the multiword DMA modes 0 and 1, using the upper half of the 'drive_data' field to store the DMA timings to program into the drive control register when DMA is turned on for real. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
* add {cs5530,sc1200}_tunepio() for programming PIO timings * add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting transfer mode and convert {cs5530,sc1200}_config_dma() to use it * bump driver version Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
sc1200.c: * remove open-coded variant of ide_dma_host_off() (== ->dma_host_off), it is not needed because ->dma_off_quietly calls ->dma_host_off * use ->dma_host_on (== ide_dma_host_on() for this driver) instead of open-coded variant, call it from the users of sc1200_config_dma2() [ there is no need to call ->dma_host_on in sc1200_config_dma() because core code takes care of calling ->ide_dma_on on successful execution of ->ide_dma_check ] * add comment about ->tuneproc interface abuse cs5530.c/sc1200.c: * core code takes care of calling ->dma_off_quietly before calling ->ide_dma_check so there is no need to call it in ->ide_dma_check methods * bump driver version Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Use ide_tune_dma() in ide-cris/it821x/pdc202xx_old/serverworks drivers. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
CS5530/SC1200 specifies that two drives on the same cable cannot mix UDMA/MDMA. Add {cs5530,sc1200}_udma_filter() to handle this. This also makes it possible to remove open-coded best DMA mode selection and use standard ide_use_dma()/ide_max_dma_mode() helpers. While at it bump version numbers. There should be no functionality changes caused by this patch. Signed-off-by:
-
