- 07 Jan, 2009 40 commits
-
-
Inaky Perez-Gonzalez authored
Implements the three basic operations provided by the stack's control interface to WiMAX devices: - Messaging channel between user space and driver/device This implements a direct communication channel between user space and the driver/device, by which free form messages can be sent back and forth. This is intended for device-specific features, vendor quirks, etc. - RF-kill framework integration Provide most of the RF-Kill integration for WiMAX drivers so that all device drivers have to do is after wimax_dev_add() is call wimax_report_rfkill_{hw,sw}() to update initial state and then every time it changes. Provides wimax_rfkill() for the kernel to call to set software RF-Kill status and/or query current hardware and software switch status. Exports wimax_rfkill() over generic netlink to user space. - Reset a WiMAX device Provides wimax_reset() for the kernel to reset a wimax device as needed and exports it over generic netlink to user space. This API is clearly limited, as it still provides no way to do the basic scan, connect and disconnect in a hardware independent way. The WiMAX case is more complex than WiFi due to the way networks are discovered and provisioned. The next developments are to add the basic operations so they can be offerent by different drivers. However, we'd like to get more vendors to jump in and provide feedback of how the user/kernel API/abstraction layer should be. The user space code for the i2400m, as of now, uses the messaging channel, but that will change as the API evolves. Signed-off-by:Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Inaky Perez-Gonzalez authored
Add an EXPORT_SYMBOL() to genl_unregister_mc_group(), to allow unregistering groups on the run. EXPORT_SYMBOL_GPL() is not used as the rest of the functions exported by this module (eg: genl_register_mc_group) are also not _GPL(). Cleanup is currently done when unregistering a family, but there is no way to unregister a single multicast group due to that function not being exported. Seems to be a mistake as it is documented as for external consumption. This is needed by the WiMAX stack to be able to cleanup unused mc groups. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Inaky Perez-Gonzalez authored
Implements the basic life cycles of a 'struct wimax_dev', some common generic netlink functionality for marshalling calls to user space, and the device state machine. For looking up net devices based on their generic netlink family IDs, use a low overhead method that optimizes for the case where most systems have a single WiMAX device, or at most, a very low number of WiMAX adaptors. Signed-off-by:
-
Inaky Perez-Gonzalez authored
This file contains a simple debug framework that is used in the stack; it allows the debug level to be controlled at compile-time (so the debug code is optimized out) and at run-time (for what wasn't compiled out). This is eventually going to be moved to use dynamic_printk(). Just need to find time to do it. Signed-off-by:
-
Inaky Perez-Gonzalez authored
This file contains declarations and definitions used by the different submodules of the stack. Signed-off-by:
-
Inaky Perez-Gonzalez authored
Definitions for the user/kernel API protocol through generic netlink. User space can copy it verbatim and use it. Kernel API definition declares the main data types and calls for the drivers to integrate into the WiMAX stack. Provides usage documentation. Signed-off-by:
-
Inaky Perez-Gonzalez authored
wimax documentation Signed-off-by:
-
Inaky Perez-Gonzalez authored
In the same spirit as debugfs_create_*(), introduce helpers for exporting size_t values over debugfs. The only trick done is that the format verifier is kept at %llu instead of %zu; otherwise type warnings would pop up: format ‘%zu’ expects type ‘size_t’, but argument 2 has type ‘long long unsigned int’ There is no real way to fix this one--however, we can consider %llu and %zu to be compatible if we consider that we are using the same for validating in debugfs_create_{x,u}{8,16,32}(). Signed-off-by: -
Greg Kroah-Hartman authored
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. No one in the tree is using the macro, so it can now be removed. Signed-off-by: -
Greg Kroah-Hartman authored
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Now that all in-tree users are gone, remove the macro. Signed-off-by: -
Greg Kroah-Hartman authored
This driver got rescued from a few years ago and was requested to be added. So I cleaned it up, ported it to the latest kernel version and here it is. Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de> Cc: Emmanuele <iemmav@gmail.com> Signed-off-by: -
Greg Kroah-Hartman authored
This is for the serial mode of the Opticon barcode scanner. Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: -
Marcin Slusarz authored
Fix oops introduced by commit ae93a55b (emi26: use request_firmware()): usb 1-1: new full speed USB device using uhci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice emi26 - firmware loader 1-1:1.0: emi26_probe start usb 1-1: firmware: requesting emi26/loader.fw usb 1-1: firmware: requesting emi26/bitstream.fw usb 1-1: firmware: requesting emi26/firmware.fw usb 1-1: emi26_set_reset - 1 usb 1-1: emi26_set_reset - 0 BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] *pde = 00000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/firmware/1-1/loading Modules linked in: emi26(+) ipv6 cpufreq_ondemand coretemp arc4 ecb iwl3945 irtty_sir sir_dev nsc_ircc ehci_hcd uhci_hcd mac80211 irda usbcore snd_hda_intel thinkpad_acpi rfkill hwmon led_class e1000e snd_pcm cfg80211 snd_timer crc_ccitt snd snd_page_alloc aes_generic Pid: 5082, comm: modprobe Not tainted (2.6.28 #2) 17023QG EIP: 0060:[<f80dc487>] EFLAGS: 00010206 CPU: 0 EIP is at emi26_probe+0x2f7/0x620 [emi26] EAX: 0000015c EBX: 00000000 ECX: c1ffd9c0 EDX: 00000000 ESI: 0000015c EDI: f6bb215c EBP: f6bb0400 ESP: f00ebcfc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process modprobe (pid: 5082, ti=f00ea000 task=f5c7c700 task.ti=f00ea000) Stack: 0000015c 000000a5 f6a67cb8 f80dc7e0 c01c6262 fbef2986 f6bb2000 00008fe0 0000015c f715f748 f715f740 f715f738 f715f748 f6a67c00 f80dd040 f80dcfc0 f6bb0400 fbacb290 f6a67c94 fbae0160 c01c70bf 00000000 f6a67c1c 00000000 Call Trace: [<c01c6262>] sysfs_add_one+0x12/0x50 [<fbacb290>] usb_probe_interface+0xa0/0x140 [usbcore] [<c01c70bf>] sysfs_create_link+0xf/0x20 [<c02dead2>] driver_probe_device+0x82/0x180 [<fbac9eeb>] usb_match_id+0x3b/0x50 [usbcore] [<c02dec4e>] __driver_attach+0x7e/0x80 [<c02de27a>] bus_for_each_dev+0x3a/0x60 [<c02de956>] driver_attach+0x16/0x20 [<c02debd0>] __driver_attach+0x0/0x80 [<c02de7b1>] bus_add_driver+0x1a1/0x220 [<c02dee4d>] driver_register+0x4d/0x120 [<c024e622>] idr_get_empty_slot+0xf2/0x290 [<fbacab71>] usb_register_driver+0x81/0x100 [usbcore] [<f806c000>] emi26_init+0x0/0x14 [emi26] [<c0101126>] do_one_initcall+0x36/0x1b0 [<c01c5e70>] sysfs_ilookup_test+0x0/0x10 [<c0197a61>] ifind+0x31/0x90 [<c01c6229>] __sysfs_add_one+0x59/0x80 [<c01c64e4>] sysfs_addrm_finish+0x14/0x1c0 [<c0175ca3>] __vunmap+0xa3/0xd0 [<c014b854>] load_module+0x1544/0x1640 [<c014b9d7>] sys_init_module+0x87/0x1b0 [<c0187f41>] sys_read+0x41/0x70 [<c01032a5>] sysenter_do_call+0x12/0x21 [<c03d0000>] wait_for_common+0x40/0x110 Code: 66 c1 e8 08 66 09 d0 75 a5 31 d2 89 e8 e8 72 fc ff ff 85 c0 0f 88 9a 02 00 00 b8 fa 00 00 00 e8 30 46 05 c8 8b 74 24 28 8b 5e 04 <8b> 03 89 44 24 1c 0f c8 89 44 24 1c 0f b7 4b 04 c7 44 24 20 00 EIP: [<f80dc487>] emi26_probe+0x2f7/0x620 [emi26] SS:ESP 0068:f00ebcfc ---[ end trace 2eefa13825431230 ]--- After the last "package" of firmware data is sent to the device, we dereference NULL pointer (on access to rec->addr). Fix it. Reported--by:
David Flatz <david@upcs.at> Tested-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: stable <stable@kernel.org> [2.6.27, 2.6.28] Signed-off-by:
-
SangSu Park authored
The usb gadget framework revealed weakness in the godu_udc gadget driver register function. Instead of checking if speed asked for was USB_LOW_SPEED upon usb_gadget_register() to deny service, it checked only for USB_FULL_SPEED, thus denying service to usb high speed capable gadgets. Signed-off-by:
SangSu Park <sangsu@gmail.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Mark Lord authored
One minor nit did show up, though. The patch below seems to make more sense than the code does without it. Signed-off-by:
Mark Lord <mlord@pobox.com> Signed-off-by:
-
Alan Stern authored
This patch (as1197) fixes an error introduced recently. Since a significant number of devices can't handle Set-Interface requests, we no longer call usb_set_interface() when a driver unbinds from an interface, provided the interface is already in altsetting 0. However the interface still does get disabled, and the call to usb_set_interface() was the only thing re-enabling it. Since the interface doesn't get re-enabled, further attempts to use it fail. So the patch adds a call to usb_enable_interface() when a driver unbinds and the interface is in altsetting 0. For this to work right, the interface's endpoints have to be re-enabled but their toggles have to be left alone. Therefore an additional argument is added to usb_enable_endpoint() and usb_enable_interface(), a flag indicating whether or not the endpoint toggles should be reset. This is a forward-ported version of a patch which fixes Bugzilla #12301. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
David Roka <roka@dawid.hu> Reported-by:
Erik Ekman <erik@kryo.se> Tested-by:
Alon Bar-Lev <alon.barlev@gmail.com> Signed-off-by:
-
Alan Stern authored
This patch (as1195) eliminates a potential problem identified by Oliver Neukum. When a driver queues an asynchronous Set-Config request using usb_driver_set_configuration(), the request should be cancelled if userspace changes the configuration first. The patch introduces a linked list of pending async Set-Config requests, and uses it to invalidate the requests for a particular device whenever that device's configuration is set. Signed-off-by:
-
Alan Stern authored
This patch (as1193b) enables wakeup during initialization for all PCI host controllers, and it removes some code (and comments!) that are no longer needed now that the PCI core automatically initializes wakeup settings for all new devices. The idea is that the bus should initialize wakeup, and the bus glue or controller driver should enable it. Signed-off-by:
-
Alan Stern authored
This patch (as1192) rearranges the USB PCI host controller suspend and resume and resume routines: Use pci_wake_from_d3() for enabling and disabling wakeup, instead of pci_enable_wake(). Carry out the actual state change while interrupts are disabled. Change the order of the preparations to agree with the general recommendation for PCI devices, instead of messing around with the wakeup settings while the device is in D3. In .suspend: Call the underlying driver to disable IRQ generation; pci_wake_from_d3(device_may_wakeup()); pci_disable_device(); In .suspend_late: pci_save_state(); pci_set_power_state(D3hot); (for PPC_PMAC) Disable ASIC clocks In .resume_early: (for PPC_PMAC) Enable ASIC clocks pci_set_power_state(D0); pci_restore_state(); In .resume: pci_enable_device(); pci_set_master(); pci_wake_from_d3(0); Call the underlying driver to reenable IRQ generation Add the necessary .suspend_late and .resume_early method pointers to the PCI host controller drivers. Signed-off-by:
-
Alan Stern authored
This patch (as1194) makes usb-storage set the CAPACITY_HEURISTICS flag for all devices made by Nokia, Nikon, or Motorola. These companies seem to include the READ CAPACITY bug in all of their devices. Since cell phones and digital cameras rely on flash storage, which always has an even number of sectors, setting CAPACITY_HEURISTICS shouldn't cause any problems. Not even if the companies wise up and start making devices without the bug. A large number of unusual_devs entries are now unnecessary, so the patch removes them. Signed-off-by:
-
Alan Stern authored
This patch (as1190) makes usb-storage's "quirks=" module parameter writable, so that users can add entries for their devices at runtime with no need to reboot or reload usb-storage. New codes are added for the SANE_SENSE, CAPACITY_HEURISTICS, and CAPACITY_OK flags. Signed-off-by:
-
Alan Stern authored
This patch (as1189b) adds some hacks to usb-storage for dealing with the growing problems involving bad capacity values and last-sector accesses: A new flag, US_FL_CAPACITY_OK, is created to indicate that the device is known to report its capacity correctly. An unusual_devs entry for Linux's own File-backed Storage Gadget is added with this flag set, since g_file_storage always reports the correct capacity and since the capacity need not be even (it is determined by the size of the backing file). An entry in unusual_devs.h which has only the CAPACITY_OK flag set shouldn't prejudice libusual, since the device will work perfectly well with either usb-storage or ub. So a new macro, COMPLIANT_DEV, is added to let libusual know about these entries. When a last-sector access succeeds and the total number of sectors is odd (the unexpected case, in which guessing that the number is even might cause trouble), a WARN is triggered. The kerneloops.org project will collect these warnings, allowing us to add CAPACITY_OK flags for the devices in question before implementing the default-to-even heuristic. If users want to prevent the stack dump produced by the WARN, they can disable the hack by adding an unusual_devs entry for their device with the CAPACITY_OK flag. When a last-sector access fails three times in a row and neither the FIX_CAPACITY nor the CAPACITY_OK flag is set, we assume the last-sector bug is present. We replace the existing status and sense data with values that will cause the SCSI core to fail the access immediately rather than retry indefinitely. This should fix the difficulties people have been having with Nokia phones. Signed-off-by:
-
David Brownell authored
Add driver for the high speed USB-OTG transceiver in TI's TWL4030 family of chips. Given this and various other pending patches, OMAP3 hardware like that from beagleboard.org, gumstix.com (Overo), and openpandora.org should now have basic USB host and peripheral connectivity with mainline kernels. Ditto for less widely-available boards. Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Darius Augulis authored
Implementation of USB device driver integrated in Freescale's i.MXL processor. Adds USB device driver for i.MXL. Signed-off-by:
Darius Augulis <augulis.darius@gmail.com> Signed-off-by:
-
Oliver Neukum authored
This extension allows unpoisoning an anchor allowing drivers that resubmit URBs to reuse an anchor for methods like resume() Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Thomas Hommel authored
There is no need to disable port 1 on ISP1761. That port could be used as an OTG port which would require a different init sequence. However we don't have OTG support (yet) so we can use it as a normal USB port. This patch allows port 1 to be used a normal Port on the ISP1761. Signed-off-by:
Thomas Hommel <Thomas.Hommel@gefanuc.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Dan Williams authored
Many newer Option mobile broadband devices initially provide a usb-storage "driver CD" device that's pretty useless on Linux since any software on it most likely wouldn't be compatible with your kernel or distro anyway. Thus, by default just kill the driver CD device by sending the SCSI 'rezero' command, but allow override of the default behavior via usb-storage module parameter so users can keep the ZeroCD device if they really want to. Inspired by the Sierra TruInstall patch. Signed-off-by:
Dan Williams <dcbw@redhat.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Cc: Peter Henn <p.henn@option.com Cc: Denis Joseph Barrow <D.Barow@option.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ming Lei authored
It is enough to protect accesses to reject field of urb by marking it as atomic_t,also it is the only reason of existence of usb_reject_lock,so remove the lock to make code more clean. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-off-by:
-
Alan Stern authored
This patch (as1185) makes usbcore take advantage of the bus notifications sent out by the driver core. Now we can create all our device and interface attribute files before the device or interface uevent is broadcast. A side effect is that we no longer create the endpoint "pseudo" devices at the same time as a device or interface is registered -- it seems like a bad idea to try registering an endpoint before the registration of its parent is complete. So the routines for creating and removing endpoint devices have been split out and renamed, and they are called explicitly when needed. A new bitflag is used for keeping track of whether or not the interface's endpoint devices have been created, since (just as with the interface attributes) they vary with the altsetting and hence can be changed at random times. Signed-off-by:
-
Wu Fengguang authored
USB: make printk messages more searchable Make USB printk messages long and straightforward. One of these decorated USB error messages cost me non-trivial efforts to locate. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Bryan Wu authored
Don't redefine the functions in musb driver Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Bryan Wu authored
Some config registers are not avaiable in Blackfin, we have to comment them out. v1-v2: - remove Blackfin specific header file - add Blackfin register version to musb_regs.h header file Signed-off-by:
-
Bryan Wu authored
- DMA registers in Blackfin have different layout - DMA interrupt flags need to be cleared by software Signed-off-by:
-
Bryan Wu authored
add Blackfin version low level register accessing helper functions Signed-off-by:
-
Robin Getz authored
Make sure we program the correct values in only when necessary. Signed-off-by:
Robin Getz <rgetz@blackfin.uclinux.org> Signed-off-by:
-
Bryan Wu authored
- replace MUSB_FIFOSIZE register to MUSB_TXCOUNT, cause no MUSB_FIFOSIZE register on Blackfin - use #ifdef to replace #if defined() Signed-off-by:
-
Bryan Wu authored
Signed-off-by:
-
Alan Stern authored
The DPCM subdriver is a little peculiar, in that it's meant to support devices where LUN 0 is Compact Flash and uses the CB transport whereas LUN 1 is SmartMedia and uses the SDDR09 transport. Thus DPCM isn't really a transport in itself; it's more like a demultiplexer. Much of the DPCM code is part of the SDDR09 subdriver already, and the remaining part is fairly small. This patch (as1182) moves that extra piece into sddr09.c, thereby eliminating dpcm.c. Also eliminated is the Kconfig entry for DPCM support; it is now listed as part of the SDDR09 entry. In order to make sure that the semantics are the same as before, each unusual_devs entry for DPCM is now present twice: once with DPCM support if SDDR09 is configured (as before), and once with the SINGLE_LUN flag and CB support otherwise. Signed-off-by:
-
