When the transport is busy and we're sending an EH command drivers
occasionally return 'BUSY'. As this in most cases is the TUR
command sent as part of the error recovery this is a sure way
to make the error recovery escalate. Returning 'NEEDS_RETRY'
here will just retry the TUR command and eventually abort the
original command, thus making error handling far smoother.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Bump driver version.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

The ibmvfc driver was incorrectly obtaining a scsi_target pointer
from an fc_rport. The way it is coded ensures that ibmvfc's
terminate_rport_io handler does absolutely nothing. Fix this up
to iterate through affected devices differently, sending cancel
and abort task set as appropriate. Without this patch,
fast_io_fail_tmo is broken for ibmvfc.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Commit 43c8da90 introduced a race
condition which can occur when adding/deleting rports. There are
two possible threads now that can be deleting rports in the ibmvfc
driver, which can result in list_del being called twice, resulting
in an oops. This patch adds a new state to the ibmvfc_target struct
to indicate the target has been removed from the list and is in
the process of being deleted.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

- Add support for re-reg'ing changed VPI w/o unregister VPI
- Copy WWN and state from old nodelist when target DID change.
- Clean up old nodelist rport and put the nodelist when target DID change.
- Clear the VFI_REGISTERED flag when UNREG_VFI completes.
- Made both checks of port_state against LPFC_FLOGI and LPFC_FDISC
  non-inclusive for ignoring CVL events.
- Added logic to stop retrying of the ongoing PLOGI and FDISC if
  transitioned back to the FCF rediscovery state in reaction to CVL.
- Removed the dependency of scanning of all the available FCF table
  entries for bulding round-robin bitmap.
- Use the lpfc_sli4_fcf_rr_read_fcf_rec() in responding to
  individual New FCF found event.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

- Remove unneeded Endian swap for Block Guard IOCB response
- Add a check for mailbox active before issuing the heartbeat command
- Correct heartbeat last_completion updates to avoid unneeded heartbeats
- Add Security crypto support to CONFIG_PORT mailbox command
- Add fips level and fips spec revision sysfs parameters
- Remove duplicate setting of ext_byte_len fields in lpfc_bsg_issue_mbox
- Switch call to memcpy_toio to __write32_copy to prevent unaligned 64 bit copy
- Change log message 0318 from an error to a warning as it is not an error
- Patch an incorrect call to lpfc_drain_txq on SLI-3 functions
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier f,f1;
position p1,p2;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
<... when != x
     when != if (...) { <+...x...+> }
     when != (x) == NULL
     when != (x) != NULL
     when != (x) == 0
     when != (x) != 0
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return <+...x...+>;
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: jack wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Added support for PCI error handling
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Outstanding mailbox commands, have no way to recover on f/w hung, and we
timeout on waiting for mbx response. This in turn affects the recovery process
as follows:
 - We might already be in dpc while waiting for mbx to complete, so recovery for
   that pci function will never get invoked. Reset Timeout (10 sec) is far less
   than mbx timeout (30 sec).
 - Other mbx cmds will get stuck due to serial mbx access.

Solution is to identify fw-hung scenario and handle outstanding mbx commands to
have an early-exit instead of waiting for response.
Other mbx commands waiting for access will also do an early-exit if fw-hung is
still applicable.
Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Also, changed boundary checking from size of total
structure to verification that we received the amount of
data needed to cache inernally. This change will provide
compatibility with mbx_sys_info structure sizes in both
older and newer firmware versions.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

If BIOS is enabled then drivers init firmware fails since
BIOS has done the init once.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

The rport port state and flags are set under the host lock,
so this patch calls fc_remote_port_chkready with the host lock
held like is also done in the other fc drivers.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Fake "address-of" expressions that evaluate to NULL generally confuse
readers and can provoke compiler warnings.  This patch (as1411)
removes one such fake expression introduced by:

commit db5bd1e0
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Thu Jun 17 10:36:49 2010 -0400

    [SCSI] convert to the new PM framework
 
using an "#ifdef" in its place.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

iscsi_boot_sysfs does not depend on firmware. Any iscsi driver
can use it. This patch moves iscsi_boot_sysfs to the scsi
dir, so that it can be used on any arch with any driver.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

be2iscsi uses iscsi_boot_*() interfaces, so it should ensure that
ISCSI_BOOT_SYSFS is enabled.

ERROR: "iscsi_boot_create_target" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_ethernet" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_host_kset" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_initiator" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_destroy_kset" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

This patch increases the max_sectors to 2048
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

This patch contains changes for adding support for iscsi_boot.
Have modified to make read of mac address from chip as a function.

  The mac_address is being cached after teh first call as it is
not expected to change
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

This driver is the only user of dma_is_consistent(). We plan to remove
this API.

The driver uses the API in the following way:

BUG_ON(!dma_is_consistent(hostdata->dev, pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());

The above code tries to see if L1_CACHE_BYTES is greater than
dma_get_cache_alignment() on sysmtes that can not allocate coherent
memory (some old systems can't).

James Bottomley exmplained that this is necesary because the driver
packs the set of mailboxes into a single coherent area and separates
the different usages by a L1 cache stride. So it's fatal if the dma
coherence stride is greater than the L1 cache size.

He also pointed out that we can kill this checking because we don't
hit this BUG_ON on all architectures that actually use the driver.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (204 commits)
  agp: intel-agp: do not use PCI resources before pci_enable_device()
  agp: efficeon-agp: do not use PCI resources before pci_enable_device()
  drm: kill BKL from common code
  drm/kms: Simplify setup of the initial I2C encoder config.
  drm,io-mapping: Specify slot to use for atomic mappings
  drm/radeon/kms: only expose underscan on avivo chips
  drm/radeon: add new pci ids
  drm: Cleanup after failing to create master->unique and dev->name
  drm/radeon: tone down overchatty acpi debug messages.
  drm/radeon/kms: enable underscan option for digital connectors
  drm/radeon/kms: fix calculation of h/v scaling factors
  drm/radeon/kms/igp: sideport is AMD only
  drm/radeon/kms: handle the case of no active displays properly in the bandwidth code
  drm: move ttm global code to core drm
  drm/i915: Clear the Ironlake dithering flags when the pipe doesn't want it.
  drm/radeon/kms: make sure HPD is set to NONE on analog-only connectors
  drm/radeon/kms: make sure rio_mem is valid before unmapping it
  drm/agp/i915: trim stolen space to 32M
  drm/i915: Unset cursor if out-of-bounds upon mode change (v4)
  drm/i915: Unreference object not handle on creation
  ...

* 'kms-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,docs: Update the kgdb docs to include kms
  drm_fb_helper: Preserve capability to use atomic kms
  i915: when kgdb is active display compression should be off
  drm/i915: use new fb debug hooks
  drm: add KGDB/KDB support
  fb: add hooks to handle KDB enter/exit
  kgdboc: Add call backs to allow kernel mode switching
  vt,console,kdb: automatically set kdb LINES variable
  vt,console,kdb: implement atomic console enter/leave functions

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  debug_core,kdb: fix crash when arch does not have single step
  kgdb,x86: use macro HBP_NUM to replace magic number 4
  kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  mm,kdb,kgdb: Add a debug reference for the kdb kmap usage
  KGDB: Remove set but unused newPC
  ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump
  ftrace,kdb: Extend kdb to be able to dump the ftrace buffer
  kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE
  arm,kgdb: Add ability to trap into debugger on notify_die
  gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
  gdbstub: Implement gdbserial 'p' and 'P' packets
  kgdb,arm: Individual register get/set for arm
  kgdb,mips: Individual register get/set for mips
  kgdb,x86: Individual register get/set for x86
  kgdb,kdb: individual register set and and get API
  gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
  kgdb: remove custom hex_to_bin()implementation

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  apparmor: depends on NET

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  scripts/dtc: Fix a resource leak
  Documentation: fix ubuntu distro name
  MAINTAINERS: Update kbuild git URLs
  Add support for the C variable in the coccicheck script
  Add scripts/coccinelle/deref_null.cocci
  Add scripts/coccinelle/err_cast.cocci
  Add scripts/coccinelle/resource_size.cocci
  Add scripts/coccinelle/alloc/kzalloc-simple.cocci
  Add scripts/coccinelle/alloc/drop_kmalloc_cast.cocci
  Add Documentation/coccinelle.txt
  Add a target to use the Coccinelle checker
  scripts: decodecode: remove bashisms
  Makefile: clarify a comment
  checkkconfigsymbols.sh: Kconfig symbols sometimes have lowercase letters
  scripts: add nconf into gitignore file

* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  kbuild: Change section of generated debian packages to kernel
  kbuild: Mark that the packages generated conform to Standards-Version 3.8.4
  kbuild: Add homepage field to debian/control file

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (26 commits)
  kconfig: add savedefconfig
  kconfig: code refactoring in confdata.c
  kconfig: refactor code in symbol.c
  kconfig: add alldefconfig
  kconfig: print more info when we see a recursive dependency
  kconfig: save location of config symbols
  kconfig: change nonint_oldconfig to listnewconfig
  kconfig: rename loose_nonint_oldconfig => oldnoconfig
  kconfig: use long options in conf
  kconfig: fix MODULES-related bug in case of no .config
  kconfig: make randconfig fair for booleans
  kconfig: Don't write invisible choice values
  kbuild: Warn on selecting symbols with unmet direct dependencies
  scripts:conf.c Fix warning: variable 'type' set but not used
  menuconfig: truncate list items
  menuconfig: fix to center checklist correctly in a corner case
  xconfig: add support to show hidden options which have prompts
  xconfig: remove unused function
  xconfig: clean up
  gconfig: fix null pointer warning
  ...

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  modpost: support objects with more than 64k sections
  trivial: fix a typo in a filename
  frv: clean up arch/frv/Makefile
  kbuild: allow assignment to {A,C}FLAGS_KERNEL on the command line
  kbuild: allow assignment to {A,C,LD}FLAGS_MODULE on the command line
  Kbuild: Add option to set -femit-struct-debug-baseonly
  Makefile: "make kernelrelease" should show the correct full kernel version
  Makefile.build: make KBUILD_SYMTYPES work again

* 'modules' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: cleanup comments, remove noinline
  module: group post-relocation functions into post_relocation()
  module: move module args strndup_user to just before use
  module: pass load_info into other functions
  module: fix sysfs cleanup for !CONFIG_SYSFS
  module: sysfs cleanup
  module: layout_and_allocate
  module: fix crash in get_ksymbol() when oopsing in module init
  module: kallsyms functions take struct load_info
  module: refactor out section header rewriting: FIX modversions
  module: refactor out section header rewriting
  module: add load_info
  module: reduce stack usage for each_symbol()
  module: refactor load_module part 5
  module: refactor load_module part 4
  module: refactor load_module part 3
  module: refactor load_module part 2
  module: refactor load_module
  module: module_unload_init() cleanup

* 'virtio' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio_blk: Remove VBID ioctl
  virtio_blk: Add 'serial' attribute to virtio-blk devices (v2)
  virtio_blk: support barriers without FLUSH feature

* 'upstream/xen' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/panic: use xen_reboot and fix smp_send_stop
  Xen: register panic notifier to take crashes of xen guests on panic
  xen: support large numbers of CPUs with vcpu info placement
  xen: drop xen_sched_clock in favour of using plain wallclock time
  pvops: do not notify callers from register_xenstore_notifier
  Introduce CONFIG_XEN_PVHVM compile option
  blkfront: do not create a PV cdrom device if xen_hvm_guest
  support multiple .discard.* sections to avoid section type conflicts
  xen/pvhvm: fix build problem when !CONFIG_XEN
  xenfs: enable for HVM domains too
  x86: Call HVMOP_pagetable_dying on exit_mmap.
  x86: Unplug emulated disks and nics.
  x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
  implement O_NONBLOCK for /proc/xen/xenbus
  xen: Fix find_unbound_irq in presence of ioapic irqs.
  xen: Add suspend/resume support for PV on HVM guests.
  xen: Xen PCI platform device driver.
  x86/xen: event channels delivery on HVM.
  x86: early PV on HVM features initialization.
  xen: Add support for HVM hypercalls.
  ...

I'm trying to generate a <set> of <book>s in docbook for wireless to
link together all the cfg80211 and mac80211 documentation.

However, docbook will generate "re01.html" anew for each book for the
first <refentry>, presumably due to a bug in the stylesheets.

An effective workaround is to use IDs for the filenames, which makes
them more descriptive as well, e.g.  API-enum-ieee80211-band.html.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixed some typos and wording.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update section 3.7 examples to reflect the current state of the
Makefiles used. Fix spelling and grammar errors along with flow of text.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update section 3.2 and 3.5 example, along with text in section 3.5
to reflect change.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>