Patch from Tony Lindgren

This patch changes OMAP serial ports to use the standard 8250
autodetection.

Signed-off-by: Tony Lindgren 
Signed-off-by: Russell King

Patch from Ben Dooks

Ensure that TI OMAP systems are only offered if
the system is configured for TI OMAP.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Ben Dooks

Fix IDCODE for S3C2410A to add missing zero in hex number

Thanks to Russell King for pointing this out

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Ben Dooks

Added missing exports of the functions in gpio.c

Thanks to Dimitry Andric for pointing this out

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

These are no longer necessary since MMC support is now merged.

Patch from Catalin Marinas

Versatile/AB code after splitting core.c
Versatile/PB code after splitting core.c

Patch from Catalin Marinas

Common changes for Versatile PB and AB

Patch from Catalin Marinas

Add ICS307 clock support

Accessing register index -1 causes vfp_get_double() to enter an
infinite loop.  Use VFP_REG_ZERO (value 16) and provide code to
emulate a sixteenth register which always returns 0.0

Patch from Nicolas Pitre

Fold two tests in one.

Signed-off-by: Nicolas Pitre 
Signed-off-by: Russell King

Patch from Ben Dooks

This fixes the following with s3c24xx power management:

- debugging needs UARTs enabled, to re-enabled UART clocks,
  save their state over suspend, and add this to the current
  documentation

- update the documentation on pm initialisation

- fix bug reported by Dimitry Andric where __raw_writel()
  has arguments the wrong way around

- fix typo (lower-case letter in S3C2410_GATSTUs2_OFFRESET)
  from Dimitry Andric

- apply Arnaud Patard's patch for pm call types

- move bits of resume code to use printk(KERN_DEBUG) as they
  are potentially before the UART resume, and are not critical
  if the system fails to re-start.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from John Lenz

Similar to sa1111.c, convert the locomo_probe function to use
the platform_get_resource\platform_get_irq instead of accessing
the pdev->resources array directly.

Patch from Peter Chubb

Fix a simple typo.

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre 
Signed-off-by: Russell King

Patch from Ben Dooks

Make addr_reg an `void __iomem *` instead of an unsigned long.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Ben Dooks

Fix incorrect bit masking of the wake maskes for 
IRQs EINT0 through EINT3 and IRQ_RTC

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

Patch from Matthias Burghardt

In ssp_init dev->port is not yet initialized. Thus it cannot be used as an argument for request_mem_region. This patch fixes that.

Patch from Matthias Burghardt

Adds bit definitions for PXA Power Manager Wake-Up Enable Register (PWER) to pxa-regs.h

Signed-off-by: Matthias Burghardt
Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King

Add CONFIG_CPU_CACHE_VIVT and CONFIG_CPU_CACHE_VIPT and use
these to conditionalise cache_is_xxx().  This allows unnecessary
cache handling code to be removed by the compiler.

Experimented a bit more with mounting a bad ext2 filesystem.

An immediate crash was caused by zero EXT2_BLOCKS_PER_GROUP(sb).
The patch below (relative to 2.6.9) adds a few checks to make sure
that things we divide by are not zero.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

On Thu, Nov 04, 2004 at 12:52:38PM -0800, Greg KH wrote:
> Hi,
>
> I get the following BUG in the sysfs code when I do:
> 	- plug in a usb-serial device.
> 	- open the port with 'cat /dev/ttyUSB0'
> 	- unplug the device.
> 	- stop the 'cat' process with control-C
>
> This used to work just fine before your big sysfs changes.

There is a similar problem reported by s390 people where we see parent
kobject (directory) going away before child kobject (sub-directory). It
seems kobject code is able to handle this, but not the sysfs. What could
be happening that in sysfs_remove_dir() of parent directory, we try to
remove its contents. It works well with the regular files as it is the
final removal for sysfs_dirent corresponding to the files. But in case
of sub-directory we are doing an extra sysfs_put().  Once while removing
parent and the other one being the one from when sysfs_remove_dir() is
called for the child.

The following patch worked for the s390 people, I hope same will work in
this case also.


o Do not remove sysfs_dirents corresponding to the sub-directory in
  sysfs_remove_dir(). They will be removed in the sysfs_remove_dir() call
  for the specific sub-directory.
Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The spin_unlock() in rotate_reclaimable_page() is not a sufficient memory
barrier.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

"clear_buffer_locked()" is just a nicer name for a clear-bit, and
on x86 (and others) we don't need any expensive memory barriers
after that.

into kroah.com:/home/greg/linux/BK/driver-2.6

into kroah.com:/home/greg/linux/BK/usb-2.6

kfifo_alloc tries to round up the buffer size to the next power of two.

But it accidently uses the original size when calling kfifo_init,
which will BUG.
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a relatively small changeset, to address small nagging problems.
Andrew pointed me at the double registration specifically, so I had to do
something about it. At least now Fabio's box won't collapse if he configures
UB by mistake. Also, a few people complained that the help text was
misleading.

I have not done anything about the oops on disconnect which happens to
Martin Schlemmer. It's next. After that I can get to Peter Jones' CD
burning patch and doing resets.

- Fix double kobject registration and eventual oops on unplug if a device
  is not cooperating.
- Add a reference to usb-storage into the configuration help.
- Just upping timeouts fixes my ZIP drive.
- Max out the diag (trace) file size.
- Set capacity to zero in case the media is absent. It works in 2.4.10-rc1.
  Either Al fixed the block layer, or the whole thing was a bug in ub.c
  (and sd.c) and a big misunderstanding.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Attached patch adds a MAINTAINER entry for the kernel event layer.
Signed-Off-By: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Looks like kobject_uevent_init is executed before netlink_proto_init and
consequently always fails.  Not cool.

Attached patch switches the initialization over from core_initcall (init
level 1) to postcore_initcall (init level 2).  Netlink's initialization
is done in core_initcall, so this should fix the problem.  We should be
fine waiting until postcore_initcall.

Also a couple white space changes mixed in, because I am anal.
Signed-Off-By: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Thanks to Serge Hallyn <serue@us.ibm.com> for pointing this out.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This clarifies more of the x86 caller/callee stack ownership
issues by making the exception and interrupt handler assembler
interfaces use register calling conventions.

System calls still use the stack.

Tested with "crashme" on UP/SMP.

 df_05_device_add_ref_fix.patch

 In device_add(), @dev wan't put'd properly when it has zero length
bus_id (error path).  Fixed.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_04_kobject_add_ref_fix.patch

In kobject_add(), @kobj wasn't put'd properly on error path.  This
patch fixes it.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_03_sysfs_release_fix.patch

Some attributes are allocated dynamically (e.g. module and device
parameters) and are usually deallocated when the assoicated kobject is
released.  So, it's not safe to access attr after putting the kobject.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_02_bus_rescan_devcies_fix.patch

 bus_rescan_devices() eventually calls device_attach() and thus
requires write locking the corresponding bus.  The original code just
called bus_for_each_dev() which only read locks the bus.  This patch
separates __bus_for_each_dev() and __bus_for_each_drv(), which don't
do locking themselves, out from the original functions and call them
with read lock in the original functions and with write lock in
bus_rescan_devices().
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

 df_01_driver_attach_comment_fix.patch

bus_match() was renamed to driver_probe_device() but the comment for
device_attach() wasn't updated.  This patch updates it.
Signed-off-by: Tejun Heo <tj@home-tj.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add the sysfs path of the physical device to the hotplug event of class
and block devices. This should solve the userspace issue not to know if
the device is a virtual one and the "device" symlink will never be created,
but we sit there and wait for it to show up not knowing when we should
give up.

Also the bus name is added to the hotplug event, so we don't need to
reverse lookup in the /sys/bus/* directory which bus our physical
device belongs to. This is e.g. the value matched against the BUS= key,
that may be used in an udev rule.

This is a PCI network card:
  ACTION=add
  SUBSYSTEM=net
  DEVPATH=/class/net/eth0
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1e.0/0000:02:01.0
  PHYSDEVBUS=pci
  INTERFACE=eth0
  SEQNUM=827
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/

This is a IDE CDROM:
  ACTION=add
  SUBSYSTEM=block
  DEVPATH=/block/hdc
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1f.1/ide1/1.0
  PHYSDEVBUS=ide
  SEQNUM=1017
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/

This is an USB-stick partition:
  ACTION=add
  SUBSYSTEM=block
  DEVPATH=/block/sda/sda1
  PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/host1/target1:0:0/1:0:0:0
  PHYSDEVBUS=scsi
  SEQNUM=1032
  PATH=/sbin:/bin:/usr/sbin:/usr/bin
  HOME=/
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>