- 14 Oct, 2011 32 commits
-
-
Bartlomiej Zolnierkiewicz authored
Always use ata_sff_data_xfer32() in ata_sff_data_xfer_noirq() so the latter can be also used for host controllers supporting 32-bit PIO operations. It is a completely safe thing to do because if 32-bit PIO is not supported or enabled ata_sff_data_xfer32() will fallback to a standard method. Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Bartlomiej Zolnierkiewicz authored
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (aec62xx) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (sl82c105) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (pdc202xx_new) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Add controller type field to struct legacy_data and then use it to merge together all ->set_piomode methods for QDI controllers. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
QDI65x0 controllers are fully supported by pata_legacy driver so remove no longer needed pata_qdi driver. Leave PATA_QDI config option for compatibility reasons and teach pata_legacy to preserve the old behavior of pata_qdi driver. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Rename 'idetm_port' and 'idetm_data' variables to 'master_port' and 'master_data' respectively to match register naming used in it8213_set_dmamode() and in ata_piix.c. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Fixes IDE -> libata regression. IDE's it8213 host driver has been supporting those modes (per official documentation) since the initial driver's merge on Feb 7 2007 (commit 9c6712c0 "ide: add it8213 IDE driver"). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
This is similar change as commit 60c3be38 ("ata_piix: parallel scanning on PATA needs an extra locking") for ata_piix host driver. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
* Fix via_init_one() to enable clock on 66 MHz devices (bug introduced in commit 460f5318 "pata_via: store UDMA masks in via_isa_bridges table"). * Factor out common code from via_[re]init_one() to via_fixup(). Acked-by:
-
Bartlomiej Zolnierkiewicz authored
XFER_SW_DMA_0 mode should be excluded from the extended cycle timing computations. Acked-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Use standard ata_cable_80wire() method for the cable detection, as a bonus this allows us to use the default ->prereset method. Acked-by:
Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by:
Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by:
-
Sergei Shtylyov authored
The suspend()/resume() methods already get the right 'struct device' to get the driver data from -- there's no need to get to the 'struct platform_device' that contains that 'struct device' just to call dev_get_drvdata()... Acked-by:
Viresh Kumar <viresh.kumar@st.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Fixes PCI access before PCI resources are allocated. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Factor out common code from serverworks_[re]init_one() to serverworks_fixup(). Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Merge identical cable routines for Dell and Sun systems into common oem_cable() one. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Cosmetic fix but thanks to it pata_ali's DMI table now matches alim15x3's one. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Core libata code takes care of it nowadays. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Factor out common code from cmd64x_[re]init_one() to cmd64x_fixup(). Remove stale comment and fix a minor CodingStyle issue while at it. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Factor out code for finding the register programming information from hpt366_set_mode() to hpt36x_find_mode(). This makes pata_hpt366 driver more similar to pata_{37x,3x2n} ones. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets. * Fix ->prereset documentation while at it. Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
-
Sergei Shtylyov authored
pata_at91_probe() forgets to call clk_put() iff ata_host_activate() fails... Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
Turn both helpers (which are used only during LLDs initialization time and thus are not performance sensitive) into wrappers around the new ata_pci_init_one() function, this cuts 20 LOC and saves ~1.1k of the output code size (x86-64): text data bss dec hex filename 21392 0 19 21411 53a3 drivers/ata/libata-sff.o.before 20256 0 19 20275 4f33 drivers/ata/libata-sff.o.after Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
.. and also a module description while at it. Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Constify tables in sil680_set_[pio,dma]mode(). Acked-by:
-
Bartlomiej Zolnierkiewicz authored
Fix documentation for sil680_sel[reg,dev]() and sil680_set_[pio,dma]mode(). Acked-by:
-
- 08 Oct, 2011 8 commits
-
-
Yong Zhang authored
Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by:
Yong Zhang <yong.zhang0@gmail.com> Signed-off-by:
-
Pawel Moll authored
This patch adds missing #includes, makes the driver selectable on non-PPC OF-enabled platforms and fixes property value accesses to be correct in Little Endian system. Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
-
Dan McGee authored
Remove a lot of ' ' (double spaces) as well as ensuring use of tabs vs. spaces is appropriate and consistent. Signed-off-by:
Dan McGee <dpmcgee@gmail.com> Signed-off-by:
-
Dan McGee authored
This pushes timing and other values into preinitialized read-only data sections rather than being inlined into the code. None of these functions are called more than a handful of times, so reducing code size makes sense. Signed-off-by:
-
Dan McGee authored
This ports the timing values over from the old IDE driver into the new PATA-based one. The comment was lying when it stated the old driver was not MWDMA capable. Boot tested on actual hardware using 'libata.force=mwdma2'. Signed-off-by:
-
Dan McGee authored
This mirrors a very old commit (3160d541, "sis5513: add ->udma_filter method for chipset_family >= ATA_133") to the old sis5513 IDE driver that prevents certain setups from working. UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure this mode is not chosen even if a connected drive supports it. Port this old patch forward to the new PATA driver to ensure UDMA5 is the highest mode used if that is what is supported. Kernel bugzilla #41582. Reviewed-by:
-
Dan McGee authored
This is similar to the existing sis_old_port_base() method. We do this same calculation and logic in multiple places (with one more to come in a future patch), so extracting it into a method makes sense. Reviewed-by:
-
Richard Zhu authored
On imx53 AHCI, soft reset fails with IPMS set when PMP is enabled but SATA HDD/ODD is connected to SATA port, do soft reset again to port 0. So the 'ahci_pmp_retry_srst_ops' is required when imx53 ahci is present. Signed-off-by:
Richard Zhu <richard.zhu@linaro.org> Acked-by:
Eric Miao <eric.miao@linaro.org> Signed-off-by:
-
