- 12 Feb, 2019 33 commits
-
-
Dexuan Cui authored
[ Upstream commit 4fcba780 ] The patch fixes: hv_kvp_daemon.c: In function 'kvp_set_ip_info': hv_kvp_daemon.c:1305:2: note: 'snprintf' output between 41 and 4136 bytes into a destination of size 4096 The "(unsigned int)str_len" is to avoid: hv_kvp_daemon.c:1309:30: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare] Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andreas Puhm authored
[ Upstream commit 68f60538 ] The probe function needs to verify the CvP enable bit in order to properly determine if FPGA Manager functionality can be safely enabled. Fixes: 34d1dc17 ("fpga manager: Add Altera CvP driver") Signed-off-by:
Andreas Puhm <puhm@oregano.at> Signed-off-by:
Anatolij Gustschin <agust@denx.de> Reviewed-by:
Moritz Fischer <mdf@kernel.org> Acked-by:
Alan Tull <atull@kernel.org> Signed-off-by:
-
Matheus Tavares authored
[ Upstream commit b3a3eafe ] Previously, ad2s90_probe ignored the return code from spi_setup, not handling its possible failure. This patch makes ad2s90_probe check if the code is an error code and, if so, do the following: - Call dev_err with an appropriate error message. - Return the spi_setup's error code. Note: The 'return ret' statement could be out of the 'if' block, but this whole block will be moved up in the function in the patch: 'staging:iio:ad2s90: Move device registration to the end of probe'. Signed-off-by:
Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Naftali Goldstein authored
[ Upstream commit 5c2dbebb ] If the association supports HE, HT/VHT rates will never be used for Tx and therefore there's no need to set the sgi-per-channel-width-support bits, so don't set them in this case. Fixes: 110b32f0 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers") Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Ioana Ciornei authored
[ Upstream commit 5500598a ] The fsl_mc_portal_allocate can fail when the requested MC portals are not yet probed by the fsl_mc_allocator. In this situation, the driver should defer the probe. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Paul Burton authored
[ Upstream commit 5ec17af7 ] The Intel EG20T Platform Controller Hub used on the MIPS Boston development board supports prefetching memory to optimize DMA transfers. Unfortunately for unknown reasons this doesn't work well with some MIPS CPUs such as the P6600, particularly when using an I/O Coherence Unit (IOCU) to provide cache-coherent DMA. In these systems it is common for DMA data to be lost, resulting in broken access to EG20T devices such as the MMC or SATA controllers. Support for a DT property to configure the prefetching was added a while back by commit 549ce8f1 ("misc: pch_phub: Read prefetch value from device tree if passed") but we never added the DT snippet to make use of it. Add that now in order to disable the prefetching & fix DMA on the affected systems. Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21068/ Cc: linux-mips@linux-mips.org Signed-off-by:
-
Miroslav Lichvar authored
[ Upstream commit 83d0bdc7 ] If a gettime64 call fails, return the error and avoid copying data back to user. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by:
-
Andy Duan authored
[ Upstream commit 397bd921 ] Current driver only enable parity enable bit and never clear it when user set the termios. The fix clear the parity enable bit when PARENB flag is not set in termios->c_cflag. Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by:
Andy Duan <fugang.duan@nxp.com> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Boris Brezillon authored
[ Upstream commit 0560054d ] For the YUV conversion to work properly, ->x_scaling[1] should never be set to VC4_SCALING_NONE, but vc4_get_scaling_mode() might return VC4_SCALING_NONE if the horizontal scaling ratio exactly matches the horizontal subsampling factor. Add a test to turn VC4_SCALING_NONE into VC4_SCALING_PPF when that happens. The old ->x_scaling[0] adjustment is dropped as I couldn't find any mention to this constraint in the spec and it's proven to be unnecessary (I tested various multi-planar YUV formats with scaling disabled, and all of them worked fine without this adjustment). Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181109102633.32603-1-boris.brezillon@bootlin.comSigned-off-by:
-
Eric Biggers authored
[ Upstream commit 0a6a40c2 ] In the "aes-fixed-time" AES implementation, disable interrupts while accessing the S-box, in order to make cache-timing attacks more difficult. Previously it was possible for the CPU to be interrupted while the S-box was loaded into L1 cache, potentially evicting the cachelines and causing later table lookups to be time-variant. In tests I did on x86 and ARM, this doesn't affect performance significantly. Responsiveness is potentially a concern, but interrupts are only disabled for a single AES block. Note that even after this change, the implementation still isn't necessarily guaranteed to be constant-time; see https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion of the many difficulties involved in writing truly constant-time AES software. But it's valuable to make such attacks more difficult. Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Frank Rowand authored
[ Upstream commit 5b3f5c40 ] The previous commit, "of: overlay: add missing of_node_get() in __of_attach_node_sysfs" added a missing of_node_get() to __of_attach_node_sysfs(). This results in a refcount imbalance for nodes attached with dlpar_attach_node(). The calling sequence from dlpar_attach_node() to __of_attach_node_sysfs() is: dlpar_attach_node() of_attach_node() __of_attach_node_sysfs() For more detailed description of the node refcount, see commit 68baf692 ("powerpc/pseries: Fix of_node_put() underflow during DLPAR remove"). Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 53bb565f ] In the expression "word1 << 16", word1 starts as u16, but is promoted to a signed int, then sign-extended to resource_size_t, which is probably not what was intended. Cast to resource_size_t to avoid the sign extension. This fixes an identical issue as fixed by commit 0b2d7076 ("x86/PCI: Fix Broadcom CNB20LE unintended sign extension") back in 2014. Detected by CoverityScan, CID#138749, 138750 ("Unintended sign extension") Fixes: 3f6ea84a ("PCI: read memory ranges out of Broadcom CNB20LE host bridge") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Bob Peterson authored
[ Upstream commit 216f0efd ] Before this patch, recovery would cause all callbacks to be delayed, put on a queue, and afterward they were all queued to the callback work queue. This patch does the same thing, but occasionally takes a break after 25 of them so it won't swamp the CPU at the expense of other RT processes like corosync. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Yi Wang authored
[ Upstream commit 46fda5b5 ] Smatch report warnings: drivers/clk/imgtec/clk-boston.c:76 clk_boston_setup() warn: possible memory leak of 'onecell' drivers/clk/imgtec/clk-boston.c:83 clk_boston_setup() warn: possible memory leak of 'onecell' drivers/clk/imgtec/clk-boston.c:90 clk_boston_setup() warn: possible memory leak of 'onecell' 'onecell' is malloced in clk_boston_setup(), but not be freed before leaving from the error handling cases. Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Yufen Wang authored
[ Upstream commit 82c08c3e ] In case panic() and panic() called at the same time on different CPUS. For example: CPU 0: panic() __crash_kexec machine_crash_shutdown crash_smp_send_stop machine_kexec BUG_ON(num_online_cpus() > 1); CPU 1: panic() local_irq_disable panic_smp_self_stop If CPU 1 calls panic_smp_self_stop() before crash_smp_send_stop(), kdump fails. CPU1 can't receive the ipi irq, CPU1 will be always online. To fix this problem, this patch split out the panic_smp_self_stop() and add set_cpu_online(smp_processor_id(), false). Signed-off-by:
Yufen Wang <wangyufen@huawei.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
James Smart authored
[ Upstream commit 30e196ca ] After a LOGO in response to an ABTS timeout, a PLOGI wasn't issued to re-establish the login. An nlp_type check in the LOGO completion handler failed to restart discovery for NVME targets. Revised the nlp_type check for NVME as well as SCSI. While reviewing the LOGO handling a few other issues were seen and were addressed: - Better lock synchronization around ndlp data types - When the ABTS times out, unregister the RPI before sending the LOGO so that all local exchange contexts are cleared and nothing received while awaiting LOGO/PLOGI handling will be accepted. - LOGO handling optimized to: Wait only R_A_TOV for a response. It doesn't need to be retried on timeout. If there wasn't a response, a PLOGI will be sent, thus an implicit logout applies as well when the other port sees it. If there is a response, any kind of response is considered "good" and the XRI quarantined for a exchange qualifier window. - PLOGI is issued as soon a LOGO state is resolved. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Suganath Prabu authored
[ Upstream commit dc730212 ] Call sas_remove_host() before removing the target devices in the driver's .remove() callback function(i.e. during driver unload time). So that driver can provide a way to allow SYNC CACHE, START STOP unit commands etc. (which are issued from SML) to the target drives during driver unload time. Once sas_remove_host() is called before removing the target drives then driver can just clean up the resources allocated for target devices and no need to call sas_port_delete_phy(), sas_port_delete() API's as these API's internally called from sas_remove_host(). Signed-off-by:
Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
James Smart authored
[ Upstream commit b114d900 ] When LCB's are rejected, if beaconing was already in progress, the Reason Code Explanation was not being set. Should have been set to command in progress. Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 3831a2a0 ] In order to properly support dynack in ad-hoc mode running wpa_supplicant, take into account authentication frames for 'late ack' detection. This patch has been tested on devices mounted on offshore high-voltage stations connected through ~24Km link Reported-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Brian Norris authored
[ Upstream commit 2bd345cd ] Commit 2ea9f12c ("ath10k: add new cipher suite support") added a new n_cipher_suites HW param with a fallback value and a warning log. Commit 03a72288 ("ath10k: wmi: add hw params entry for wcn3990") later added WCN3990 HW entries, but it missed the n_cipher_suites. Rather than seeing this warning every boot ath10k_snoc 18800000.wifi: invalid hw_params.n_cipher_suites 0 let's provide the appropriate value. Cc: Rakesh Pillai <pillair@qti.qualcomm.com> Cc: Govind Singh <govinds@qti.qualcomm.com> Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Lior David authored
[ Upstream commit 66449740 ] A successful call to wil_tx_ring takes skb reference so it will only be freed in wil_tx_complete. Consume the skb in wil_find_tx_bcast_2 to prevent memory leak. Signed-off-by:
Lior David <liord@codeaurora.org> Signed-off-by:
Maya Erez <merez@codeaurora.org> Signed-off-by:
-
Alexei Avshalom Lazar authored
[ Upstream commit d083b2e2 ] With current reset flow, Talyn sometimes get stuck causing PCIe enumeration to fail. Fix this by removing some reset flow operations that are not relevant for Talyn. Setting bit 15 in RGF_HP_CTRL is WBE specific and is not in use for all wil6210 devices. For Sparrow, BIT_HPAL_PERST_FROM_PAD and BIT_CAR_PERST_RST were set as a WA an HW issue. Signed-off-by:
Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by:
-
Nickhu authored
[ Upstream commit 4c3d6174 ] When the kernel configs of ftrace and frame pointer options are choosed, the compiler option of kernel will incompatible. Error message: nds32le-linux-gcc: error: -pg and -fomit-frame-pointer are incompatible Signed-off-by:
Nickhu <nickhu@andestech.com> Signed-off-by:
Zong Li <zong@andestech.com> Acked-by:
Greentime Hu <greentime@andestech.com> Signed-off-by:
-
Steve Longerbeam authored
[ Upstream commit 819bec35 ] Prevent possible race by parallel threads between ipu_image_convert_run() and ipu_image_convert_unprepare(). This involves setting ctx->aborting to true unconditionally so that no new job runs can be queued during unprepare, and holding the ctx->aborting flag until the context is freed. Note that the "normal" ipu_image_convert_abort() case (e.g. not during context unprepare) should clear the ctx->aborting flag after aborting any active run and clearing the context's pending queue. This is because it should be possible to continue to use the conversion context and queue more runs after an abort. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Tested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Long Li authored
[ Upstream commit b8259219 ] If the number of NUMA nodes exceeds the number of MSI/MSI-X interrupts which are allocated for a device, the interrupt affinity spreading code fails to spread them across all nodes. The reason is, that the spreading code starts from node 0 and continues up to the number of interrupts requested for allocation. This leaves the nodes past the last interrupt unused. This results in interrupt concentration on the first nodes which violates the assumption of the block layer that all nodes are covered evenly. As a consequence the NUMA nodes above the number of interrupts are all assigned to hardware queue 0 and therefore NUMA node 0, which results in bad performance and has CPU hotplug implications, because queue 0 gets shut down when the last CPU of node 0 is offlined. Go over all NUMA nodes and assign them round-robin to all requested interrupts to solve this. [ tglx: Massaged changelog ] Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Cc: Michael Kelley <mikelley@microsoft.com> Link: https://lkml.kernel.org/r/20181102180248.13583-1-longli@linuxonhyperv.comSigned-off-by:
-
Jernej Skrabec authored
[ Upstream commit c96d6221 ] It turns out that TCON TOP registers in H6 SoC have non-zero reset value. This may cause issues if bits are not changed during configuration. To prevent that, initialize registers to 0. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-24-jernej.skrabec@siol.netSigned-off-by:
-
Muchun Song authored
[ Upstream commit 18534df4 ] gpiod_request_commit() copies the pointer to the label passed as an argument only to be used later. But there's a chance the caller could immediately free the passed string(e.g., local variable). This could trigger a use after free when we use gpio label(e.g., gpiochip_unlock_as_irq(), gpiochip_is_requested()). To be on the safe side: duplicate the string with kstrdup_const() so that if an unaware user passes an address to a stack-allocated buffer, we won't get the arbitrary label. Also fix gpiod_set_consumer_name(). Signed-off-by:
Muchun Song <smuchun@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 1539c7f2 ] Randconfig testing revealed a very old bug, with gcc-8: sound/soc/intel/atom/sst/sst_loader.c: In function 'sst_load_fw': sound/soc/intel/atom/sst/sst_loader.c:357:5: error: 'fw' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (fw == NULL) { ^ sound/soc/intel/atom/sst/sst_loader.c:354:25: note: 'fw' was declared here const struct firmware *fw; We must check the return code of request_firmware() before we look at the pointer result that may be uninitialized when the function fails. Fixes: 9012c954 ("ASoC: Intel: mrfld - Add DSP load and management") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 3c7b30f7 ] The BCM2835 pinctrl driver acquires a spinlock in its ->irq_enable, ->irq_disable and ->irq_set_type callbacks. Spinlocks become sleeping locks with CONFIG_PREEMPT_RT_FULL=y, therefore invocation of one of the callbacks in atomic context may cause a hard lockup if at least two GPIO pins in the same bank are used as interrupts. The issue doesn't occur with just a single interrupt pin per bank because the lock is never contended. I'm experiencing such lockups with GPIO 8 and 28 used as level-triggered interrupts, i.e. with ->irq_disable being invoked on reception of every IRQ. The critical section protected by the spinlock is very small (one bitop and one RMW of an MMIO register), hence converting to a raw spinlock seems a better trade-off than converting the driver to threaded IRQ handling (which would increase latency to handle an interrupt). Cc: Mathias Duckeck <m.duckeck@kunbus.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
-
Deepak Sharma authored
[ Upstream commit d5c04dff ] Modify vgem_init to take platform dev as parent in drm_dev_init. This will make drm device available at "/sys/devices/platform/vgem" in x86 chromebook. v2: rebase, address checkpatch typo and line over 80 characters Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Deepak Sharma <deepak.sharma@amd.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-1-emil.l.velikov@gmail.comSigned-off-by:
-
Slawomir Stepien authored
[ Upstream commit 0559ef7f ] Inside __ad7280_read32(), the spi_sync_transfer() can fail with negative error code. This change will ensure that this error is being passed up in the call stack, so it can be handled. Signed-off-by:
Slawomir Stepien <sst@poczta.fm> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit a3780509 ] idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/gpu/drm/drm_bufs.c:1420 drm_legacy_freebufs() warn: potential spectre issue 'dma->buflist' [r] (local cap) Fix this by sanitizing idx before using it to index dma->buflist Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Alexey Brodkin authored
commit a66d9724 upstream. Initially we bumped into problem with 32-bit aligned atomic64_t on ARC, see [1]. And then during quite lengthly discussion Peter Z. mentioned ARCH_KMALLOC_MINALIGN which IMHO makes perfect sense. If allocation is done by plain kmalloc() obtained buffer will be ARCH_KMALLOC_MINALIGN aligned and then why buffer obtained via devm_kmalloc() should have any other alignment? This way we at least get the same behavior for both types of allocation. [1] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004009.html [2] http://lists.infradead.org/pipermail/linux-snps-arc/2018-July/004036.htmlSigned-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by:
-
- 06 Feb, 2019 7 commits
-
-
Greg Kroah-Hartman authored
-
Paulo Alcantara authored
commit 28eb24ff upstream. In case a hostname resolves to a different IP address (e.g. long running mounts), make sure to resolve it every time prior to calling generic_ip_connect() in reconnect. Suggested-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
Paulo Alcantara <palcantara@suse.de> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Alexei Naberezhnov authored
commit 483cbbed upstream. This fixes the case when md array assembly fails because of raid cache recovery unable to allocate a stripe, despite attempts to replay stripes and increase cache size. This happens because stripes released by r5c_recovery_replay_stripes and raid5_set_cache_size don't become available for allocation immediately. Released stripes first are placed on conf->released_stripes list and require md thread to merge them on conf->inactive_list before they can be allocated. Patch allows final allocation attempt during cache recovery to wait for new stripes to become availabe for allocation. Cc: linux-raid@vger.kernel.org Cc: Shaohua Li <shli@kernel.org> Cc: linux-stable <stable@vger.kernel.org> # 4.10+ Fixes: b4c625c6 ("md/r5cache: r5cache recovery: part 1") Signed-off-by:
Alexei Naberezhnov <anaberezhnov@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Frank Rowand authored
commit 8814dc46 upstream. When allocating a new node, add_changeset_node() was duplicating the properties from the respective node in the overlay instead of allocating a node with no properties. When this patch is applied the errors reported by the devictree unittest from patch "of: overlay: add tests to validate kfrees from overlay removal" will no longer occur. These error messages are of the form: "OF: ERROR: ..." and the unittest results will change from: ### dt-test ### end of unittest - 203 passed, 7 failed to ### dt-test ### end of unittest - 210 passed, 0 failed Tested-by:
-
Frank Rowand authored
commit 6b4955ba upstream. The changeset entry 'update property' was used for new properties in an overlay instead of 'add property'. The decision of whether to use 'update property' was based on whether the property already exists in the subtree where the node is being spliced into. At the top level of creating a changeset describing the overlay, the target node is in the live devicetree, so checking whether the property exists in the target node returns the correct result. As soon as the changeset creation algorithm recurses into a new node, the target is no longer in the live devicetree, but is instead in the detached overlay tree, thus all properties are incorrectly found to already exist in the target. This fix will expose another devicetree bug that will be fixed in the following patch in the series. When this patch is applied the errors reported by the devictree unittest will change, and the unittest results will change from: ### dt-test ### end of unittest - 210 passed, 0 failed to ### dt-test ### end of unittest - 203 passed, 7 failed Tested-by:
-
Frank Rowand authored
commit 5b2c2f5a upstream. There is a matching of_node_put() in __of_detach_node_sysfs() Remove misleading comment from function header comment for of_detach_node(). This patch may result in memory leaks from code that directly calls the dynamic node add and delete functions directly instead of using changesets. This commit should result in powerpc systems that dynamically allocate a node, then later deallocate the node to have a memory leak when the node is deallocated. The next commit will fix the leak. Tested-by:
-
Frank Rowand authored
commit 144552c7 upstream. Add checks: - attempted kfree due to refcount reaching zero before overlay is removed - properties linked to an overlay node when the node is removed - node refcount > one during node removal in a changeset destroy, if the node was created by the changeset After applying this patch, several validation warnings will be reported from the devicetree unittest during boot due to pre-existing devicetree bugs. The warnings will be similar to: OF: ERROR: of_node_release(), unexpected properties in /testcase-data/overlay-node/test-bus/test-unittest11 OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /testcase-data-2/substation@100/ hvac-medium-2 Tested-by:
-
