Pull core locking updates from Thomas Gleixner:
 "Header cleanup as requested by Linus"

(This is the "don't include support for ww_mutex in a header file that
everybody wants, when almost nobody wants the ww part" change)

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mutex: Move ww_mutex definitions to ww_mutex.h

Pull ARM SoC fixes from Olof Johansson:
 "This is our first set of fixes from arm-soc for 3.11.
   - A handful of build and warning fixes from Arnd
   - A collection of OMAP fixes
   - defconfig updates to make the default configs more useful for real
     use (and testing) out of the box on hardware

  And a couple of other small fixes.  Some of these have been recently
  applied but it's normally how we deal with fixes, with less bake time
  in -next needed"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  arm: multi_v7_defconfig: Tweaks for omap and sunxi
  arm: multi_v7_defconfig: add i.MX options and NFS root
  ARM: omap2: add select of TI_PRIV_EDMA
  ARM: exynos: select PM_GENERIC_DOMAINS only when used
  ARM: ixp4xx: avoid circular header dependency
  ARM: OMAP: omap_common_late_init may be unused
  ARM: sti: move DEBUG_STI_UART into alphabetical order
  ARM: OMAP: build mach-omap code only if needed
  ARM: zynq: use DT_MACHINE_START
  ARM: omap5: omap5 has SCU and TWD
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ...

Pull ARM fixes from Russell King:
 "A few fixes for ARM, mostly just one liners with the exception of the
  missing section specification.  We decided not to rely on .previous to
  fix this but to explicitly state the section we want the code to be
  in."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7778/1: smp_twd: twd_update_frequency need be run on all online CPUs
  ARM: 7782/1: Kconfig: Let ARM_ERRATA_364296 not depend on CONFIG_SMP
  ARM: mm: fix boot on SA1110 Assabet
  ARM: 7781/1: mmu: Add debug_ll_io_init() mappings to early mappings
  ARM: 7780/1: add missing linker section markup to head-common.S

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove <asm/kspd.h>
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...

Pull watchdog updates from Wim Van Sebroeck:
 - lots of devm_ conversions and cleanup
 - platform_set_drvdata cleanups
 - s3c2410: dev_err/dev_info + dev_pm_ops
 - watchdog_core: don't try to stop device if not running fix
 - wdrtas: use print_hex_dump
 - xilinx cleanups
 - orion_wdt fixes
 - softdog cleanup
 - hpwdt: check on UEFI bits
 - deletion of mpcore_wdt driver
 - addition of broadcom BCM2835 watchdog timer driver
 - addition of MEN A21 watcdog devices

* git://www.linux-watchdog.org/linux-watchdog: (38 commits)
  watchdog: hpwdt: Add check for UEFI bits
  watchdog: softdog: remove replaceable ping operation
  watchdog: New watchdog driver for MEN A21 watchdogs
  Watchdog: fix clearing of the watchdog interrupt
  Watchdog: allow orion_wdt to be built for Dove
  watchdog: Add Broadcom BCM2835 watchdog timer driver
  watchdog: delete mpcore_wdt driver
  watchdog: xilinx: Setup the origin compatible string
  watchdog: xilinx: Fix driver header
  watchdog: wdrtas: don't use custom version of print_hex_dump
  watchdog: core: don't try to stop device if not running
  watchdog: jz4740: Pass device to clk_get
  watchdog: twl4030: Remove redundant platform_set_drvdata()
  watchdog: mpcore: Remove redundant platform_set_drvdata()
  watchdog: da9055: use platform_{get,set}_drvdata()
  watchdog: da9052: use platform_{get,set}_drvdata()
  watchdog: cpwd: use platform_{get,set}_drvdata()
  watchdog: s3c2410_wdt: convert s3c2410wdt to dev_pm_ops
  watchdog: s3c2410_wdt: use dev_err()/dev_info() instead of pr_err()/pr_info()
  watchdog: wm831x: use platform_{get,set}_drvdata()
  ...

Pull InfiniBand/RDMA changes from Roland Dreier:
 - AF_IB (native IB addressing) for CMA from Sean Hefty
 - new mlx5 driver for Mellanox Connect-IB adapters (including post
   merge request fixes)
 - SRP fixes from Bart Van Assche (including fix to first merge request)
 - qib HW driver updates
 - resurrection of ocrdma HW driver development
 - uverbs conversion to create fds with O_CLOEXEC set
 - other small changes and fixes

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
  mlx5: Return -EFAULT instead of -EPERM
  IB/qib: Log all SDMA errors unconditionally
  IB/qib: Fix module-level leak
  mlx5_core: Adjust hca_cap.uar_page_sz to conform to Connect-IB spec
  IB/srp: Let srp_abort() return FAST_IO_FAIL if TL offline
  IB/uverbs: Use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()
  mlx5_core: Fixes for sparse warnings
  IB/mlx5: Make profile[] static in main.c
  mlx5: Fix parameter type of health_handler_t
  mlx5: Add driver for Mellanox Connect-IB adapters
  IB/core: Add reserved values to enums for low-level driver use
  IB/srp: Bump driver version and release date
  IB/srp: Make HCA completion vector configurable
  IB/srp: Maintain a single connection per I_T nexus
  IB/srp: Fail I/O fast if target offline
  IB/srp: Skip host settle delay
  IB/srp: Avoid skipping srp_reset_host() after a transport error
  IB/srp: Fix remove_one crash due to resource exhaustion
  IB/qib: New transmitter tunning settings for Dell 1.1 backplane
  IB/core: Fix error return code in add_port()
  ...

Pull media updates from Mauro Carvalho Chehab:
 "This series contain:
   - new i2c video drivers: ml86v7667 (video decoder),
                            ths8200 (video encoder)
   - a new video driver for EasyCap cards based on Fushicai USBTV007
   - Improved support for OF and embedded systems, with V4L2 async
     initialization and a better support for clocks
   - API cleanups on the ioctls used by the v4l2 debug tool
   - Lots of cleanups
   - As usual, several driver improvements and new cards additions
   - Revert two changesets that change the minimal symbol rate for
     stv0399, as request by Manu
   - Update MAINTAINERS and other files to point to my new e-mail"

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (378 commits)
  MAINTAINERS & ABI: Update to point to my new email
  [media] stb0899: restore minimal rate to 5Mbauds
  [media] exynos4-is: Correct colorspace handling at FIMC-LITE
  [media] exynos4-is: Set valid initial format on FIMC.n subdevs
  [media] exynos4-is: Set valid initial format on FIMC-IS-ISP subdev pads
  [media] exynos4-is: Fix format propagation on FIMC-IS-ISP subdev
  [media] exynos4-is: Set valid initial format at FIMC-LITE
  [media] exynos4-is: Fix format propagation on FIMC-LITE.n subdevs
  [media] MAINTAINERS: Update S5P/Exynos FIMC driver entry
  [media] Documentation: Update driver's directory in video4linux/fimc.txt
  [media] exynos4-is: Change fimc-is firmware file names
  [media] exynos4-is: Add support for Exynos5250 MIPI-CSIS
  [media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driver
  [media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platforms
  [media] media: i2c: tvp514x: remove manual setting of subdev name
  [media] media: i2c: tvp7002: remove manual setting of subdev name
  [media] mem2mem: set missing v4l2_dev pointer
  [media] wl128x: add missing struct v4l2_device
  [media] tvp514x: Fix init seqeunce
  [media] saa7134: Fix sparse warnings by adding __user annotation
  ...

Pull more xfs updates from Ben Myers:
 "Here are a fix for xfs_fsr, a cleanup in bulkstat, a cleanup in
  xfs_open_by_handle, updated mount options documentation, a cleanup in
  xfs_bmapi_write, a fix for the size of dquot log reservations, a fix
  for sgid inheritance when acls are in use, a fix for cleaning up
  quotainfo structures, and some more of the work which allows group and
  project quotas to be used together.

  We had a few more in this last quota category that we might have liked
  to get in, but it looks there are still a few items that need to be
  addressed.

   - fix for xfs_fsr returning -EINVAL
   - cleanup in xfs_bulkstat
   - cleanup in xfs_open_by_handle
   - update mount options documentation
   - clean up local format handling in xfs_bmapi_write
   - fix dquot log reservations which were too small
   - fix sgid inheritance for subdirectories when default acls are in use
   - add project quota fields to various structures
   - fix teardown of quotainfo structures when quotas are turned off"

* tag 'for-linus-v3.11-rc1-2' of git://oss.sgi.com/xfs/xfs:
  xfs: Fix the logic check for all quotas being turned off
  xfs: Add pquota fields where gquota is used.
  xfs: fix sgid inheritance for subdirectories inheriting default acls [V3]
  xfs: dquot log reservations are too small
  xfs: remove local fork format handling from xfs_bmapi_write()
  xfs: update mount options documentation
  xfs: use get_unused_fd_flags(0) instead of get_unused_fd()
  xfs: clean up unused codes at xfs_bulkstat()
  xfs: use XFS_BMAP_BMDR_SPACE vs. XFS_BROOT_SIZE_ADJ

Pull cifs fixes from Steve French:
 "Fixes for 4 cifs bugs, including a reconnect problem, a problem
  parsing responses to SMB2 open request, and setting nlink incorrectly
  to some servers which don't report it properly on the wire.  Also
  improves data integrity on reconnect with series from Pavel which adds
  durable handle support for SMB2."

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix a deadlock when a file is reopened
  CIFS: Reopen the file if reconnect durable handle failed
  [CIFS] Fix minor endian error in durable handle patch series
  CIFS: Reconnect durable handles for SMB2
  CIFS: Make SMB2_open use cifs_open_parms struct
  CIFS: Introduce cifs_open_parms struct
  CIFS: Request durable open for SMB2 opens
  CIFS: Simplify SMB2 create context handling
  CIFS: Simplify SMB2_open code path
  CIFS: Respect create_options in smb2_open_file
  CIFS: Fix lease context buffer parsing
  [CIFS] use sensible file nlink values if unprovided
  Limit allocation of crypto mechanisms to dialect which requires

OMAP recently changed how the platforms are configured, so OMAP2/3/4 SoC
support is no longer enabled by default. Add them back.

Enable new ethernet driver for sunxi.

The i.MX console options moved due to resorting, no functional change.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes

From Linus Walleij:
Ux500 defconfig changes:
- Update base due to different Kconfig changes
- Select watchdog, MUSB, Ux500 ALSA SoC, various MMC/SD
  features and enable highmem

* tag 'ux500-defconfig-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: Enable HIGHMEM in the u8500 defconfig
  ARM: ux500: Update MMC configs for u8500 defconfig
  ARM: ux500: select SND_SOC_UX500 for ux500
  ARM: ux500: update defconfig base
  ARM: ux500: select WATCHDOG and MUSB for ux500
Signed-off-by: Olof Johansson <olof@lixom.net>

- Add i.MX serial console support. This gives us the boot messages on
  UART on e.g. the i.MX6Q sabre sd platform.
- Add the necessary config options, to allow booting with NFS root on
  an i.MX6 sabre sd.
- Add Freescale LPUART serial console support. This gives us the boot
  messages on UART on e.g. the Vybrid VF610 Tower board.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Russell King <linux@arm.linux.org.uk>
[olof: squashed three commits down to one]
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Omap fixes and minor defconfig updates that would be good to
get in before -rc1.

* tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
  ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
  ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
  ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
  ARM: OMAP2+: devices: remove duplicated include from devices.c
  ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
  ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
  ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
  ARM: OMAP2+: Remove obsolete Makefile line
  ARM: OMAP5: Enable Cortex A15 errata 798181
  ARM: scu: provide inline dummy functions when SCU is not present
  ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4
  ARM: OMAP2+: timer: initialize before using oh_name
Signed-off-by: Olof Johansson <olof@lixom.net>

Add/move/change conflicts in arch/arm/mach-omap2/Kconfig resolved.

This that should have been fixed but weren't, way to much, intrusive
and late.

Move the definitions for wound/wait mutexes out to a separate
header, ww_mutex.h. This reduces clutter in mutex.h, and
increases readability.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Dave Airlie <airlied@gmail.com>
Link: http://lkml.kernel.org/r/51D675DC.3000907@canonical.com
[ Tidied up the code a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

For copy_to/from_user() failure, the correct error code is -EFAULT not
-EPERM.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

This patch adds code to log SDMA errors for supportability purposes.
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

The vzalloc()'ed field physshadow is leaked on module unload.

This patch adds vfree after the sibling page shadow is freed.
Reported-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Sparse reported an endianness bug in the assignment to hca_cap.uar_page_sz.

Fix the declaration of this field to be __be16 (which is what is in
the firmware spec), renaming the field to log_uar_pg_size to conform
to the spec, which fixes the endianness bug reported by sparse.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Moshe Lazer <moshel@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

If the transport layer is offline it is more appropriate to let
srp_abort() return FAST_IO_FAIL instead of SUCCESS.
Reported-by: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>

If we request reading or writing on a file that needs to be
reopened, it causes the deadlock: we are already holding rw
semaphore for reading and then we try to acquire it for writing
in cifs_relock_file. Fix this by acquiring the semaphore for
reading in cifs_relock_file due to we don't make any changes in
locks and don't need a write access.

CC: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

This is a follow-on patch for 8/8 patch from the durable handles
series. It fixes the problem when durable file handle timeout
expired on the server and reopen returns -ENOENT for such files.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>

During the review of seperate pquota inode patches, David noticed
that the test to detect all quotas being turned off was
incorrect, and hence the block was not freeing all the quota
information.

The check made sense in Irix, but in Linux, quota is turned off
one at a time, which makes the test invalid for Linux.

This problem existed since XFS was ported to Linux.

David suggested to fix the problem by detecting when all quotas are
turned off by checking m_qflags.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>

This patch is being created to use the UEFI bits in the type 219 SMBIOS
record in order to decide whether or not to execute BIOS code. This is a
better solution than to depend on the iCRU bit since not all future servers
will use iCRU.
Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
----
drivers/watchdog/hpwdt.c |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)

In watchdog_ping(), 'start' is called automatically when 'ping' function call
is not configured.
Softdog driver has same handling in both cases - start and ping, so 'ping' OPS
can be removed.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patch adds the driver for the watchdog devices found on MEN Mikro
Elektronik A21 VMEbus CPU Carrier Boards. It has DT-support and uses the
watchdog framework.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The bits in BRIDGE_CAUSE are documented as RW0C - read, write 0 to
clear.  If we read the register, mask off the watchdog bit, and
write it back, we're actually clearing every interrupt which wasn't
pending at the time we read the register - and that is racy.

Fix this to only write ~WATCHDOG_BIT to the register, which means
we write as zero only the watchdog bit.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The watchdog infrastructure in Dove is no different from that in
Orion5x or Kirkwood, so let's enable it for Dove.  The only things
missing are a few register settings in Dove's bridge-regs.h.

Rather than duplicating the same register bit masks for the RSTOUTn_MASK
and BRIDGE_CAUSE registers, move the definitions into the watchdog
driver itself.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This adds a driver for watchdog timer hardware present on Broadcom BCM2835 SoC,
used in Raspberry Pi and Roku 2 devices.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-watchdog@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org

Pull device-mapper changes from Alasdair G Kergon:
 "Add a device-mapper target called dm-switch to provide a multipath
  framework for storage arrays that dynamically reconfigure their
  preferred paths for different device regions.

  Fix a bug in the verity target that prevented its use with some
  specific sizes of devices.

  Improve some locking mechanisms in the device-mapper core and bufio.

  Add Mike Snitzer as a device-mapper maintainer.

  A few more clean-ups and fixes"

* tag 'dm-3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: add switch target
  dm: update maintainers
  dm: optimize reorder structure
  dm: optimize use SRCU and RCU
  dm bufio: submit writes outside lock
  dm cache: fix arm link errors with inline
  dm verity: use __ffs and __fls
  dm flakey: correct ctr alloc failure mesg
  dm verity: remove pointless comparison
  dm: use __GFP_HIGHMEM in __vmalloc
  dm verity: fix inability to use a few specific devices sizes
  dm ioctl: set noio flag to avoid __vmalloc deadlock
  dm mpath: fix ioctl deadlock when no paths

Pull core block IO updates from Jens Axboe:
 "Here are the core IO block bits for 3.11. It contains:

   - A tweak to the reserved tag logic from Jan, for weirdo devices with
     just 3 free tags.  But for those it improves things substantially
     for random writes.

   - Periodic writeback fix from Jan.  Marked for stable as well.

   - Fix for a race condition in IO scheduler switching from Jianpeng.

   - The hierarchical blk-cgroup support from Tejun.  This is the grunt
     of the series.

   - blk-throttle fix from Vivek.

  Just a note that I'm in the middle of a relocation, whole family is
  flying out tomorrow.  Hence I will be awal the remainder of this week,
  but back at work again on Monday the 15th.  CC'ing Tejun, since any
  potential "surprises" will most likely be from the blk-cgroup work.
  But it's been brewing for a while and sitting in my tree and
  linux-next for a long time, so should be solid."

* 'for-3.11/core' of git://git.kernel.dk/linux-block: (36 commits)
  elevator: Fix a race in elevator switching
  block: Reserve only one queue tag for sync IO if only 3 tags are available
  writeback: Fix periodic writeback after fs mount
  blk-throttle: implement proper hierarchy support
  blk-throttle: implement throtl_grp->has_rules[]
  blk-throttle: Account for child group's start time in parent while bio climbs up
  blk-throttle: add throtl_qnode for dispatch fairness
  blk-throttle: make throtl_pending_timer_fn() ready for hierarchy
  blk-throttle: make tg_dispatch_one_bio() ready for hierarchy
  blk-throttle: make blk_throtl_bio() ready for hierarchy
  blk-throttle: make blk_throtl_drain() ready for hierarchy
  blk-throttle: dispatch from throtl_pending_timer_fn()
  blk-throttle: implement dispatch looping
  blk-throttle: separate out throtl_service_queue->pending_timer from throtl_data->dispatch_work
  blk-throttle: set REQ_THROTTLED from throtl_charge_bio() and gate stats update with it
  blk-throttle: implement sq_to_tg(), sq_to_td() and throtl_log()
  blk-throttle: add throtl_service_queue->parent_sq
  blk-throttle: generalize update_disptime optimization in blk_throtl_bio()
  blk-throttle: dispatch to throtl_data->service_queue.bio_lists[]
  blk-throttle: move bio_lists[] and friends to throtl_service_queue
  ...

Pull SCSI target updates from Nicholas Bellinger:
 "Lots of activity this round on performance improvements in target-core
  while benchmarking the prototype scsi-mq initiator code with
  vhost-scsi fabric ports, along with a number of iscsi/iser-target
  improvements and hardening fixes for exception path cases post v3.10
  merge.

  The highlights include:

   - Make persistent reservations APTPL buffer allocated on-demand, and
     drop per t10_reservation buffer.  (grover)
   - Make virtual LUN=0 a NULLIO device, and skip allocation of NULLIO
     device pages (grover)
   - Add transport_cmd_check_stop write_pending bit to avoid extra
     access of ->t_state_lock is WRITE I/O submission fast-path.  (nab)
   - Drop unnecessary CMD_T_DEV_ACTIVE check from
     transport_lun_remove_cmd to avoid extra access of ->t_state_lock in
     release fast-path.  (nab)
   - Avoid extra t_state_lock access in __target_execute_cmd fast-path
     (nab)
   - Drop unnecessary vhost-scsi wait_for_tasks=true usage +
     ->t_state_lock access in release fast-path.  (nab)
   - Convert vhost-scsi to use modern se_cmd->cmd_kref
     TARGET_SCF_ACK_KREF usage (nab)
   - Add tracepoints for SCSI commands being processed (roland)
   - Refactoring of iscsi-target handling of ISCSI_OP_NOOP +
     ISCSI_OP_TEXT to be transport independent (nab)
   - Add iscsi-target SendTargets=$IQN support for in-band discovery
     (nab)
   - Add iser-target support for in-band discovery (nab + Or)
   - Add iscsi-target demo-mode TPG authentication context support (nab)
   - Fix isert_put_reject payload buffer post (nab)
   - Fix iscsit_add_reject* usage for iser (nab)
   - Fix iscsit_sequence_cmd reject handling for iser (nab)
   - Fix ISCSI_OP_SCSI_TMFUNC handling for iser (nab)
   - Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED (nab)

  The last five iscsi/iser-target items are CC'ed to stable, as they do
  address issues present in v3.10 code.  They are certainly larger than
  I'd like for stable patch set, but are important to ensure proper
  REJECT exception handling in iser-target for 3.10.y"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  iser-target: Ignore non TEXT + LOGOUT opcodes for discovery
  target: make queue_tm_rsp() return void
  target: remove unused codes from enum tcm_tmrsp_table
  iscsi-target: kstrtou* configfs attribute parameter cleanups
  iscsi-target: Fix tfc_tpg_auth_cit configfs length overflow
  iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow
  iser-target: Add support for ISCSI_OP_TEXT opcode + payload handling
  iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len]
  iser-target: Add vendor_err debug output
  target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10)
  target: Return correct sense data for IO past the end of a device
  target: Add tracepoints for SCSI commands being processed
  iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED
  iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser
  iscsi-target: Fix iscsit_sequence_cmd reject handling for iser
  iscsi-target: Fix iscsit_add_reject* usage for iser
  iser-target: Fix isert_put_reject payload buffer post
  iscsi-target: missing kfree() on error path
  iscsi-target: Drop left-over iscsi_conn->bad_hdr
  target: Make core_scsi3_update_and_write_aptpl return sense_reason_t
  ...

Interrupt request doesn't use the right API: The TWD watchdog uses a per-cpu
interrupt (usually interrupt #30), and the GIC configuration should flag it as
such. With this setup, request_irq() should fail, and the right API is
request_percpu_irq(), together with enable_percpu_irq()/disable_percpu_irq().

Nothing ensures the userspace ioctl() will end-up kicking the watchdog on the
right CPU.

There are no users of this driver since a long time and it makes more sense to
get rid of it as nobody is looking to fix it.

In case somebody wakes up after this has been removed and needs it, please
revert this driver and pick these updates (These were never pushed to mainline):

http://comments.gmane.org/gmane.linux.ports.arm.kernel/245998Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Watchdog 1.01.a is also compatible with 1.00.a.
Add the origin version to compatible list.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull sound fixes from Takashi Iwai:
 "A few small fixes (and cleanups) for HD-audio, USB-audio and ASoC"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: fix regression for fixed stream quirk
  ALSA: hda - Keep halting ALC5505 DSP
  ASoC: wm8962: fix NULL pdata pointer
  ASoC: imx-sgtl5000: return E_PROBE_DEFER if ssi/codec not found
  ASoC: Samsung: Remove redundant comment
  ALSA: hda - Fix EAPD vmaster hook for AD1884 & co
  ASoC: samsung: Remove obsolete GPIO based DT pinmuxing
  ASoC: mxs: register saif mclk to clock framework

Pull remoteproc fixes from Ohad Ben-Cohen:
 "Trivial remoteproc fixes by Suman Anna, Wei Yongjun and Thomas Meyer"

* tag 'remoteproc-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: Cocci spatch "memdup.spatch"
  remoteproc: free carveout memories only after unmapping them
  remoteproc/omap: fix a sparse warning
  remoteproc: fix checkpatch errors in remoteproc code
  remoteproc: fix error return code in rproc_fw_boot()

Pull Xtensa updates from Chris Zankel.

* tag 'xtensa-next-20130710' of git://github.com/czankel/xtensa-linux: (22 commits)
  xtensa: remove the second argument of __bio_kmap_atomic()
  xtensa: add static function tracer support
  xtensa: Flat DeviceTree copy not future-safe
  xtensa: check TLB sanity on return to userspace
  xtensa: adjust boot parameters address when INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is selected
  xtensa: bootparams: fix typo
  xtensa: tell git to ignore generated .dtb files
  xtensa: ccount based sched_clock
  xtensa: ccount based clockevent implementation
  xtensa: consolidate ccount access routines
  xtensa: cleanup ccount frequency tracking
  xtensa: timex.h: remove unused symbols
  xtensa: tell git to ignore copied zlib source files
  xtensa: fix section mismatch in pcibios_fixup_bus
  xtensa: ISS: fix section mismatch in iss_net_setup
  arch: xtensa: include: asm: compiling issue, need cmpxchg64() defined.
  xtensa: xtfpga: fix section mismatch
  xtensa: remove unused platform_init_irq()
  xtensa: tell git to ignore generated files
  xtensa: flush TLB entries for pages of non-current mm correctly
  ...

Pull more power management and ACPI updates from Rafael Wysocki:

 - Fix for a recent cpufreq regression that caused WARN() to trigger
   overzealously in a couple of places and spam the kernel log with
   useless garbage as a result.  From Viresh Kumar.

 - ACPI dock fix removing a discrepancy between the definition of
   acpi_dock_init(), which says that the function returns int, and its
   header in the header file, which says that it is a void function.
   The function is now defined as void too.

 - ACPI PM fix for failures to update device power states as needed, for
   example, during resume from system suspend, because the old state was
   deeper than the new one, but the new one is not D0.

 - Fix for two debug messages in the ACPI power resources code that
   don't have a newline at the end and make the kernel log difficult to
   read.  From Mika Westerberg.

 - Two ACPI cleanups from Naresh Bhat and Haicheng Li.

 - cpupower updates from Thomas Renninger, including Intel Haswell
   support improvements and a new idle-set subcommand among other
   things.

* tag 'pm+acpi-3.11-rc1-more' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / power: add missing newline to debug messages
  cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states
  cpupower: Haswell also supports the C-states introduced with SandyBridge
  cpupower: Introduce idle-set subcommand and C-state enabling/disabling
  cpupower: Implement disabling of cstate interface
  cpupower: Make idlestate usage unsigned
  ACPI / fan: Initialize acpi_state variable
  ACPI / scan: remove unused LIST_HEAD(acpi_device_list)
  ACPI / dock: Actually define acpi_dock_init() as void
  ACPI / PM: Fix corner case in acpi_bus_update_power()
  cpufreq: Fix serialization of frequency transitions

- Remove reference for IP version
- Fix header coding style
- Remove notes which are visible from the code
- Fix driver license according to header
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>