- 13 Sep, 2012 27 commits
-
-
Emil Goode authored
This patch changes some signed integers to unsigned because they are not intended for negative values and sparse is making noise about it. Sparse gives eight of these errors: drivers/media/usb/gspca/ov519.c:144:29: error: dubious one-bit signed bitfield Signed-off-by:
Emil Goode <emilgoode@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ezequiel Garcia authored
struct vb2_queue is allocated through kzalloc as part of a larger struct, there's no need to clear it. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Ezequiel Garcia authored
This lock was being taken using two different names (pointers) in the same function. Both names refer to the same lock, so this wasn't an error; but it looked very strange. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/radio/shark2.o: In function `_GLOBAL__sub_I_65535_0_usb_shark_suspend': drivers/media/radio/radio-shark2.c:344: multiple definition of `usb_shark_suspend' drivers/media/radio/radio-shark.o:/home/v4l/v4l/patchwork/drivers/media/radio/radio-shark.c:379: first defined here drivers/media/radio/shark2.o: In function `usb_shark_resume': drivers/media/radio/radio-shark2.c:349: multiple definition of `usb_shark_resume' drivers/media/radio/radio-shark.o:/home/v4l/v4l/patchwork/drivers/media/radio/radio-shark.c:384: first defined here Signed-off-by: -
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
This completes my work on the Griffin radioSHARK2 driver, let me use this opportunity to thank Hisaaki Shibata for his generous donation of a Griffin radioSHARK2 to me, which has made this driver possible. Signed-off-by:
-
Hans de Goede authored
freq fits easily into 32 bits until it gets shifted, so make it 32 bits, and cast it to 64 bits before shifting. [mchehab@redhat.com: also remove asm/div64.h header, as this is not needed anymore] Signed-off-by:
-
Hans de Goede authored
Add support for tuning AM (on devices with the necessary additional hardware components), and advertise the available bands using the new VIDIOC_ENUM_FREQ_BANDS ioctl. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Reinhard Nissl authored
Am 14.08.2012 14:05, schrieb Manu Abraham: >> My other device, a STB0899, always reports the set frequency. So it seems >> driver dependent whether it reports the actually locked frequency found by >> the zig-zag-algorithm or just the set frequency to tune to. > > The STV0299 blindly sets the value based on a software zigzag (due to simpler > hardware), but this might not be accurate enough. On the other hand, the > STB0899 internally does zig-zag in hardware for DVB-S2, and partly in > software for DVB-S. > > In any event, the get_frontend callback should return the value that is read > from the demodulator registers, rather than the cached original value that > which was requested to be tuned. > > The stb0899 returns only the cached value IIRC. Maybe I will fix this soon, > or maybe you can send a patch. This is what I get after the patch: Sat. Pol. Band Freq (MHz) Set Freq (MHz) Get Delta (MHz) S19,2E H L 10744 10748,474 4,474 S19,2E H L 10773 10777,944 4,944 S19,2E H L 10832 10836,953 4,953 S19,2E H L 10861 10868,774 7,774 ... Signed-off-by:
Reinhard Nißl <rnissl@gmx.de> Cc: Manu Abraham <abraham.manu@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
changeset 1248c7cb broke html compilation: Documentation/DocBook/v4l2.xml:584: parser error : Entity 'sub-subdev-g-edid' not defined Documentation/DocBook/v4l2.xml:626: parser error : chunk is not well balanced Documentation/DocBook/media_api.xml:74: parser error : Failure to process entity sub-v4l2 Documentation/DocBook/media_api.xml:74: parser error : Entity 'sub-v4l2' not defined I suspect that one file was simply missed at the patch. Yet, keeping it broken is a very bad idea, so we should either remove the broken patch or to remove just the invalid include. Let's take the latter approach. Due to that, a warning is now produced: Error: no ID for constraint linkend: v4l2-subdev-edid. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Laurent Pinchart authored
Compute the horizontal blanking value according to the datasheet. The value written to the hblank and vblank registers must be equal to the number of blank columns and rows minus one. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Sakari Ailus authored
Provide pixel rate control calculated from external clock and horizontal binning factor. Signed-off-by:
-
Laurent Pinchart authored
These helper functions get and set a 64-bit control's value from within a driver. They are similar to v4l2_ctrl_[gs]_ctrl() but operate on 64-bit integer controls instead of 32-bit controls. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
-
Hans Verkuil authored
Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1741 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - No HDCP repeater support (we don't use that either) I'm sure that there are more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by:
-
Hans Verkuil authored
Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1545 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - Only port A of the four HDMI input ports is implemented (our hardware only uses that port) - No HDCP repeater support (we don't use that either) And since there are some 600-odd pages of datasheet for this single device, I'm sure that there are many more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by:
-
Hans Verkuil authored
These two helper functions detect whether the analog video timings detected by the video receiver match the VESA CVT or GTF standards. They basically do the inverse of the CVT and GTF modeline calculations. This patch also adds a helper function that will determine the aspect ratio based on the provided EDID values. This aspect ratio can be given to the GTF helper function. Signed-off-by:
-
Hans Verkuil authored
Add the v4l_match_dv_timings function that can be used to compare two v4l2_dv_timings structs. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
These new controls and two new ioctls make it possible to properly support VGA, DVI-A/D/I, HDMI and DisplayPort connectors. All these controls and the ioctls are all at the sub-device level. They are meant for V4L2 bridge/platform drivers or to be accessed on embedded systems through /dev/v4l-subdev* device nodes. Signed-off-by:
-
Antti Palosaari authored
Those files were left from dvb-usb-v2 development as I have made mistake during rebase operation. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
- 12 Sep, 2012 1 commit
-
-
Mauro Carvalho Chehab authored
This symbol got removed by menu reorganization; just depending on DVB_CORE is enough. Reported-by:
-
- 11 Sep, 2012 1 commit
-
-
Alexey Khoroshilov authored
If pci_register_driver() failed, resources allocated in ddb_class_create() are leaked. The patch fixes it as well as it replaces -1 with correct error code in ddb_class_create(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
- 10 Sep, 2012 5 commits
-
-
Anton Nurkin authored
Fixes problem with CAM, when after re-iinitialization CAM used old pointer to structure. Signed-off-by:
Anton Nurkin <ptqa@netup.ru> Signed-off-by:
-
Antti Palosaari authored
Let the dvb-frontend return -ENOTTY for those unimplemented IOCTLs. Signed-off-by:
-
Antti Palosaari authored
ENOTTY is now returned for unimplemented ioctl by dvb-frontend. Old EOPNOTSUPP & ENOSYS could be still returned by some drivers as well as other "non standard" error codes. EAGAIN is returned in case of device is in state where it cannot perform requested operation. This is for example sleep and statistics are queried. Quick check for few demodulator drivers reveals there is a lot of different error codes used in such case currently, few to mention still: EOPNOTSUPP, ENOSYS, EAGAIN ... Lets try harmonize. Signed-off-by:
-
Antti Palosaari authored
Earlier it was returning -EOPNOTSUPP. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
- 06 Sep, 2012 1 commit
-
-
Mauro Carvalho Chehab authored
Based on a patch from Sylvester Nawrocki This fixes regression introduced with commmit cb7a01ac, "[media] move i2c files into drivers/media/i2c". The linked order affect what drivers will be initialized first, when they're built-in at Kernel. While there are macros that allow changing the init order, like subsys_initcall(), late_initcall() & friends, when all drivers linked belong to the same subsystem, it is easier to change the order at the Makefile. All I2C modules must be linked before any drivers that actually use it, in order to ensure proper module initialization order. Also, the core drivers should be initialized before the drivers that use them. This patch reorders the drivers init, in order to fulfill the above requirements. Reported-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by:
-
- 24 Aug, 2012 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 3.6-rc3 * tag 'v3.6-rc3': (764 commits) Linux 3.6-rc3 task_work: add a scheduling point in task_work_run() fs: fix fs/namei.c kernel-doc warnings eventpoll: use-after-possible-free in epoll_create1() vfio: grab vfio_device reference *before* exposing the sucker via fd_install() vfio: get rid of vfio_device_put()/vfio_group_get_device* races vfio: get rid of open-coding kref_put_mutex introduce kref_put_mutex() vfio: don't dereference after kfree... fbcon: fix race condition between console lock and cursor timer (v1.1) mm: compaction: Abort async compaction if locks are contended or taking too long mm: have order > 0 compaction start near a pageblock with free pages rapidio/tsi721: fix unused variable compiler warning rapidio/tsi721: fix inbound doorbell interrupt handling drivers/rtc/rtc-rs5c348.c: fix hour decoding in 12-hour mode mm: correct page->pfmemalloc to fix deactivate_slab regression drivers/rtc/rtc-pcf2123.c: initialize dynamic sysfs attributes mm/compaction.c: fix deferring compaction mistake drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ resources string: do not export memweight() to userspace ...
-
- 22 Aug, 2012 4 commits
-
-
Linus Torvalds authored
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Intel: edid fixes, power consumption fix, s/r fix, haswell fix Radeon: BIOS loading fixes for UEFI and Thunderbolt machines, better MSAA validation, lockup timeout fixes, modesetting fixes One udl dpms fix, one vmwgfx fix, a couple of trivial core changes. There is an export added to ACPI as part of the radeon bios fixes. I've also included the fbcon flashing cursor vs deinit race fix, that seems the simplest place to start" Trivial conflict in drivers/video/console/fbcon.c due to me having already applied the fbcon flashing cursor vs deinit race fix, and Dave had added a comment in there too. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) fbcon: fix race condition between console lock and cursor timer (v1.1) drm: Add missing static storage class specifiers in drm_proc.c file drm/udl: dpms off the crtc when disabled. drm: Remove two unused fields from struct drm_display_mode drm: stop vmgfx driver explosion drm/radeon/ss: use num_crtc rather than hardcoded 6 Revert "drm/radeon: fix bo creation retry path" drm/i915: use hsw rps tuning values everywhere on gen6+ drm/radeon: split ATRM support out from the ATPX handler (v3) drm/radeon: convert radeon vfct code to use acpi_get_table_with_size ACPI: export symbol acpi_get_table_with_size drm/radeon: implement ACPI VFCT vbios fetch (v3) drm/radeon/kms: extend the Fujitsu D3003-S2 board connector quirk to cover later silicon stepping drm/radeon: fix checking of MSAA renderbuffers on r600-r700 drm/radeon: allow CMASK and FMASK in the CS checker on r600-r700 drm/radeon: init lockup timeout on ring init drm/radeon: avoid turning off spread spectrum for used pll drm/i915: fall back to bit-banging if GMBUS fails in CRT EDID reads drm/i915: extract connector update from intel_ddc_get_modes() for reuse drm/i915: fix hsw uncached pte ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "The executive summary includes: - Post-merge review comments for tcm_vhost (MST + nab) - Avoid debugging overhead when not debugging for tcm-fc(FCoE) (MDR) - Fix NULL pointer dereference bug on alloc_page failulre (Yi Zou) - Fix REPORT_LUNs regression bug with pSCSI export (AlexE + nab) - Fix regression bug with handling of zero-length data CDBs (nab) - Fix vhost_scsi_target structure alignment (MST) Thanks again to everyone who contributed a bugfix patch, gave review feedback on tcm_vhost code, and/or reported a bug during their own testing over the last weeks. There is one other outstanding bug reported by Roland recently related to SCSI transfer length overflow handling, for which the current proposed bugfix has been left in queue pending further testing with other non iscsi-target based fabric drivers. As the patch is verified with loopback (local SGL memory from SCSI LLD) + tcm_qla2xxx (TCM allocated SGL memory mapped to PCI HW) fabric ports, it will be included into the next 3.6-rc-fixes PULL request." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Remove unused se_cmd.cmd_spdtl tcm_fc: rcu_deref outside rcu lock/unlock section tcm_vhost: Fix vhost_scsi_target structure alignment target: Fix regression bug with handling of zero-length data CDBs target/pscsi: Fix bug with REPORT_LUNs handling for SCSI passthrough tcm_vhost: Change vhost_scsi_target->vhost_wwpn to char * target: fix NULL pointer dereference bug alloc_page() fails to get memory tcm_fc: Avoid debug overhead when not debugging tcm_vhost: Post-merge review changes requested by MST tcm_vhost: Fix incorrect IS_ERR() usage in vhost_scsi_map_iov_to_sgl
-
git://git.pengutronix.de/git/wsa/linuxLinus Torvalds authored
Pull i2c-embedded fixes from Wolfram Sang: "Some bugfixes for the "embedded" part of the I2C subsystem. The fixes affect mostly drivers which have been largely reworked lately and where regressions appeared." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP i2c: diolan-u2c: Fix master_xfer return code I2C: OMAP: xfer: fix runtime PM get/put balance on error i2c: nomadik: Add default configuration into the Nomadik I2C driver
-
