- 12 Jul, 2014 1 commit
-
-
Mika Kuoppala authored
The register to read cz count is different from vlv. Also the counts returned from CCK_CTL1 for BSW are (ticks in 30ns - 1). czcount_30ns of value 1 is a special case for 320Mhz. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80703Suggested-by: Deepak S <deepak.s@linux.intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Tested-by: Guo Jinxian <jinxianx.guo@intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 11 Jul, 2014 18 commits
-
-
Sagar Kamble authored
Cc: damien.lespiau@intel.com Cc: daniel.vetter@ffwll.ch Cc: ville.syrjala@linux.intel.com Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Sagar Kamble authored
These property descriptions were kept as placeholder. Removing them for simplicity. Cc: damien.lespiau@intel.com Cc: daniel.vetter@ffwll.ch Cc: ville.syrjala@linux.intel.com Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
drm_rotation_simplify() can be used to eliminate unsupported rotation flags. It will check if any unsupported flags are present, and if so it will modify the rotation to an alternate form by adding 180 degrees to rotation angle, and flipping the reflect x and y bits. The hope is that this identity transform will eliminate the unsupported flags. Of course that might not result in any more supported rotation, so the caller is still responsible for checking the result afterwards. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Add some helper functions to move drm_rects between different rotated coordinate spaces. One function does the forward transform and another does the inverse. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Use the new drm_mode_create_rotation_property() in omapdrm. Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Add a function to create a standards compliant rotation property. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Make drm_property_create_bitmask() a bit more generic by allowing the caller to specify which bits are in fact supported. This allows multiple callers to use the same enum list, but still create different versions of the same property with different list of supported bits. v2: Populate values[] array as non-sparse Make supported_bits 64bit Fix up omapdrm call site (Rob) Cc: dri-devel@lists.freedesktop.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Sagar Kamble <sagar.a.kamble@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
The rotation property stuff should be standardized among all drivers. Move the bits to drm_crtc.h from omap_drv.h. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
This is useful for userspace utilities to verify and micromanaging the increase/decrease frequncy. v2: Use vlv_gpu_freq to get freq (Deepak) Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
Enabled PM interrupt programming for CHV. Re-using gen8 code and extending same for CHV. Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
Adding chv specific fre/encode conversion. v2: Remove generic function and platform check (Daniel) Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
We need mem_freq or cz clock for freq/opcode conversion Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
This is useful for userspace utilities to verify and micromanaging the increase/decrease frequncy. Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
Reading RP1 for valleyview to help us enable "pm_rps" i-g-t testcase execution. Signed-off-by: Deepak S <deepak.s@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> [danvet: Add missing static.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
VLV and CHV disable the DP port only in the .post_disable() hook, so we need to make intel_sanitize_encoder() call that when it's trying to disable encoders without an active pipes. My bsw actaully hits this when an external display is connected. The BIOS still likes to turn on the eDP port, but leaves the pipe disabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rafael Barbalho <rafael.barbalho@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Remove now bogus comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
No need to re-read the hardware rps fuses when we already have all the values tucked away in dev_priv->rps. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
In commit 62942ed7 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Jun 13 09:28:33 2014 -0700 drm/i915/vlv: disable PPGTT on early revs v3 we forgot about CHV. IS_VALLEYVIEW() is true for CHV, so we need to explicitly avoid disabling PPGTT on CHV. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Deepak S <deepak.s@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 10 Jul, 2014 21 commits
-
-
Chris Wilson authored
We can eliminate a lot of special case code by making the computation of the interrupt mask be correct for all callers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Place the RPS counters inside the RPS struct. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Damien Lespiau authored
C is super happy to asign anything pointer to void *. Don't pretend otherwise. Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
We may reach this point while the machine is still runtime suspended, so we'll hit a WARN. The other encoders also don't touch registers at this point, so instead of waking the machine up, write some code to keep the register always at the same state, including after we runtime suspend/resume. Testcase: igt/pm_rpm Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Just like we do for the other encoders. This should fix some WARNs when running pm_rpm on SNB. Testcase: igt/pm_rpm Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Just like we already do in haswell_get_pipe_config(). This should prevent some WARNs when we run pm_rpm on SNB. Testcase: igt/pm_rpm Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Since we now have support for shared DPLLS. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
To be able to do this we need to separately keep track of how many crtcs need a given WRPLL and how many actually actively use it. The common shared dpll framework already has all this, including massive state readout and cross checking. Which allows us to do this switch in a fairly small patch. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Mostly this patch is one big excersize in deleting code and asserts which are no longer needed. Note that we still abuse the shared dpll framework a bit since we call the enable/disable functions from the crtc mode_set and off hooks. But changing the actual hardware sequence will be done in the next step. Note that besides the massive amount of changes in this patch the places and order in which the low-level WRPLL code is called is absolutely unchanged. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This time around another cute hack to pre-fill the pll->hw_state with the right values. And also remove a bunch of checks which will be replaced by lots more checks in the common framework. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Currently still with a redudant WARN_ON in there, the common shared dpll code will take care of this in the future. Also we need to flip the switch for the transitional hack now to make sure that we disable the right pll. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Still tacked onto the side, but slowly getting there. v2: Don't forget the debugfs file. v3 (from Paulo): Don't forget to check the power domains. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
And get/put it when needed. The special thing about this commit is that it will now return false in ibx_pch_dpll_get_hw_state() in case the power domain is not enabled. This will fix some WARNs we have when we run pm_rpm on SNB. Testcase: igt/pm_rpm Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
The WRPLLs won't use them. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Just filing in names and ids, but not yet officially registering them so that the hw state cross checker doesn't completely freak out about them. Still since we do already read out and cross check config->shared_dpll the basics are now there to flesh out the wrpll shared dpll implementation. The idea is now to roll out all the callbacks step-by-step and then at the end switch to the shared dpll framework. This way hw and sw changes are clearly separated. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [imre: added const to hsw_ddi_pll_names (Damien)] Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
This way only the dynamic WRPLL selection for hdmi ddi mode is done in intel_ddi_pll_select. v2: Don't clobber the precomputed values when selecting clocks fro hdmi encoders. v3 (from Paulo): Rebase on top of the s/IS_HASWELL/HAS_DDI/ patch. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Paulo Zanoni authored
Don't let it fall in the HAS_PCH_SPLIT() case. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
To make things a bit more manageable extract a new function for reading out common ddi port state. This means a bit of duplication between encoders and the core since both look at the same registers, but doesn't seem worth to make a fuzz about. We can also remove the state readout code in intel_ddi_setup_hw_pll_state. That code is only called from the hardware take over and not the cross check code, and only after the crtc state is reconstructed. So we can rely on an accurate value of crtc->config.ddi_pll_sel already. Compared to the old code also trust the hw state more and don't special-case port A - we want to cross-check the actual-state, not bake in our own assumptions about how this is supposed to all be linked up. v2: Make use of the read-out ddi_pll_sel in intel_ddi_clock_get. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Just boring sed job for preparation. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
Similar to how the ->crtc_mode_set hook should touch the hardware to enable anything the ->crtc_off hook should disable anything in the hardware. Otherwise runtime pm for dpms will not work. Currently the only things left int the haswell_crtc_off hook is disabling the ddi plls. We can't move the WRPLL enabling out yet because the current ddi pll sharing code used by the haswell code doesn't separately track active users and overall users. This must be fixed by porting it to the generic shared display pll framework, which is powerful enough. But the SPLL source is only used by the crt encoder and so can be moved already. We only need to make sure that the ddi port E is already off, which hsw_fdi_disable does by calling intel_ddi_post_disable. With this the code reorg to shuffle hsw fdi/lpt specific code into a new hsw-specific crt encoder type is now finally complete. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-