- 28 Jan, 2008 40 commits
-
-
Francois Romieu authored
- whitespaces vs tabs - use 80 cols - use if_mii - use netdev_priv - remove useless cast to void * - PCI device id does not need to be globally available Signed-off-by:Francois Romieu <romieu@fr.zoreil.com>
-
Francois Romieu authored
Signed-off-by: -
Francois Romieu authored
Signed-off-by: -
Francois Romieu authored
drivers/net/r6040.c: In function 'rx_buf_alloc': drivers/net/r6040.c:262: warning: passing argument 2 of 'pci_map_single' makes pointer from integer without a cast Signed-off-by: -
Komuro authored
Signed-off-by:
Komuro <komurojun-mbn@nifty.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Signed-off-by:Jeff Garzik <jgarzik@redhat.com>
-
Divy Le Ray authored
Synchronize memory access before ringing the Tx door bell. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Divy Le Ray authored
Disable PEX errors. The HW generates false positives. Update RSS hash function to a symmetric algorithm. Update T3C HW support Signed-off-by:
-
Divy Le Ray authored
Remove unused argument in sysfs methods Signed-off-by:
-
Divy Le Ray authored
Do not use skb->cb to stash unmap info, save the info to the descriptor state. Signed-off-by:
-
Divy Le Ray authored
Bump up FW version to 5.0. Do not downgrade FW within the same major version range. Signed-off-by:
-
Divy Le Ray authored
Add PCI recovery support Signed-off-by:
-
Divy Le Ray authored
Remove sysfs entries before unregistering the net devices. Signed-off-by:
-
Divy Le Ray authored
Subdevice ID is not necessarily set to 1. Use wild card for PCI device matching Signed-off-by:
-
Divy Le Ray authored
Return error code when msi-x settings fail. Signed-off-by:
-
Jeff Garzik authored
Signed-off-by: -
Jeff Garzik authored
Signed-off-by: -
Jeff Garzik authored
- checkpatch fixes - fix bogus and uninitialized return codes in r6040_start_xmit() - netdev_get_settings() fix obvious locking bug flagged by compiler warning - set DMA consistent mask - remove unnecessary setting of dev->base_addr Signed-off-by: -
Jeff Garzik authored
Signed-off-by: -
Peter Korsgaard authored
dm_write_async and dm_write_reg_async are almost identical. Move common functionality to dm_write_async_helper (saves ~256b). Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
3c501 leads the way... 8) Signed-off-by:
-
Adrian Bunk authored
This patch #if 0's the following unused functions: - espi.c:t1_espi_set_misc_ctrl() - sge.c:t1_sched_set_max_avail_bytes() - sge.c:t1_sched_set_drain_bits_per_us() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Eliezer Tamir authored
Signed-off-by:
Eliezer Tamir <eliezert@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sreenivasa Honnur authored
- Support to add/delete/store/restore 64 and 128 Ethernet addresses for Xframe I and Xframe II respectively. Signed-off-by:
Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by:
-
Patrick McHardy authored
Add support for configuring secondary unicast addresses. Unicast addresses take precendece over multicast addresses when filling the exact address filters to avoid going to promiscous mode. When more unicast addresses are present than filter slots, unicast filtering is disabled and all slots can be used for multicast addresses. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
Joe Perches authored
Add functions for reg_pattern_test and reg_set_and check Changed macros to use these functions Compiled x86, untested Size decreased ~2K old: $ size drivers/net/e1000e/ethtool.o text data bss dec hex filename 14461 0 0 14461 387d drivers/net/e1000e/ethtool.o new: $ size drivers/net/e1000e/ethtool.o text data bss dec hex filename 12498 0 0 12498 30d2 drivers/net/e1000e/ethtool.o Signed-off-by:
-
Joe Perches authored
Minimal macro to function conversion in e1000_ethtool.c Adds functions reg_pattern_test and reg_set_and_check Changes REG_PATTERN_TEST and REG_SET_AND_CHECK macros to call these functions. Saves ~2.5KB Compiled x86, untested (no hardware) old: $ size drivers/net/e1000/e1000_ethtool.o text data bss dec hex filename 16778 0 0 16778 418a drivers/net/e1000/e1000_ethtool.o new: $ size drivers/net/e1000/e1000_ethtool.o text data bss dec hex filename 14128 0 0 14128 3730 drivers/net/e1000/e1000_ethtool.o Signed-off-by:
-
Auke Kok authored
formerly e1000/e1000e only updated traffic counters once every 2 seconds with the register values of bytes/packets. With newer code however in the interrupt and polling code we can real-time fill in these values in the netstats struct for users to see. Signed-off-by:
-
Auke Kok authored
formerly e1000/e1000e only updated traffic counters once every 2 seconds with the register values of bytes/packets. With newer code however in the interrupt and polling code we can real-time fill in these values in the netstats struct for users to see. Signed-off-by:
-
Jay Vosburgh authored
Update the bonding documentation: more discussion on initialization and configuration, changes to discussion of packet reordering in balance-rr, update some out of date information. Based in part on input from Rick Jones <rick.jones2@hp.com> and Andy Gospodarek <andy@greyhouse.net>. Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Acked-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Sten Wang authored
This patch adds support for the RDC R6040 MAC we can find in the RDC R-321x System-on-chips. Signed-off-by:
Sten Wang <sten.wang@rdc.com.tw> Signed-off-by:
Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu>
-
David Acker authored
On the systems that have cache incoherent DMA, including ARM, there is a race condition between software allocating a new receive buffer and hardware writing into a buffer. The two race on touching the last Receive Frame Descriptor (RFD). It has its el-bit set and its next link equal to 0. When hardware encounters this buffer it attempts to write data to it and then update Status Word bits and Actual Count in the RFD. At the same time software may try to clear the el-bit and set the link address to a new buffer. Since the entire RFD is once cache-line, the two write operations can collide. This can lead to the receive unit stalling or interpreting random memory as its receive area. The fix is to set the el-bit on and the size to 0 on the next to last buffer in the chain. When the hardware encounters this buffer it stops and does not write to it at all. The hardware issues an RNR interrupt with the receive unit in the No Resources state. Software can write to the tail of the list because it knows hardware will stop on the previous descriptor that was marked as the end of list. Once it has a new next to last buffer prepared, it can clear the el-bit and set the size on the previous one. The race on this buffer is safe since the link already points to a valid next buffer and the software can handle the race setting the size (assuming aligned 16 bit writes are atomic with respect to the DMA read). If the hardware sees the el-bit cleared without the size set, it will move on to the next buffer and skip this one. If it sees the size set but the el-bit still set, it will complete that buffer and then RNR interrupt and wait. Signed-off-by:
David Acker <dacker@roinet.com> Signed-off-by:
-
