USB generic driver
Rename the protocol used by the MOTU FastLane to 'raw' because it might
be useful with other devices, and there are other MOTU interfaces that
do not use this protocol.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

USB generic driver
This patch enables the boot commands to activate high speed mode (and
associated sample formats like 8 channels with 24 bits at 96 kHz) on the
SB Audigy 2 NX.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

EMU10K1/EMU10K2 driver
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>

VIA82xx driver
Reporter: Marko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

USB generic driver
Add a quirk for the Yamaha USB MIDI device with USB ID 0x103d.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

Documentation,ARM,/arm/Makefile,ARM PXA2XX driver
Added ARM PXA2xx AC97 driver by Nicolas Pitre
(moved from alsa-driver tree).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,SPARC,/sparc/Makefile
Add the DBRI driver on Sparcs by Martin Habets <mhabets@users.sourceforge.net>
(moved from alsa-driver tree).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SPARC
Added simple help texts to Kconfig of Sparc sound drivers.
(Better texts are appreciated :)
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Maestro3 driver
- Clean up maestro3 code
- Use msleep()
- Don't enable hw-vol irq when not defined
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Intel8x0 driver,AC97 Codec
Fix resume of intel8x0 driver.  The ac97 codec didn't restore some registers
properly, and the restore of ICH4 SPDIF and SDIN settings was missing.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

CMIPCI driver
Added 'Mic Boost Capture Switch' and 'Phone' switches.
The existing playback switch is renamed as 'Mic Boost Playback Switch'.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Digigram VX Pocket driver
Removed unused files (dropped by the last change).
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,PCMCIA Kconfig,Digigram VX Pocket driver
- Fixed Oops with request_firmware()
- Detect the card type in runtime (vxpoocket v2 or 440)
- snd-vxp440 driver is merged to snd-vxpocket
- Clean up the code
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA Codec driver
Use the new kstrdup() function instead of in-house one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA sequencer
Add the missing snd-seq-midi-emul to SND_GUS_SYNTH list.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA Core
This patch changes, adds and remove some comments, which will
make now more sense and fit on a 80-char line. It also changes
the order of snd_power_wait() to make the file more readable.
It removes the device.c comment in front of _snd_minor,
cause snd_minor has nothing to do with device.c.
The both typos in the kernel-docs were corrected too.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA Core
Both typos were in the kerneldocs.

I splitted the snd_assert() calls in one-expression-per-call for better
debugging.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA Codec driver
Added the model entry for Acer APFV.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Documentation,HDA Codec driver
- Added a new '6stack' model for ALC880.
- Fixed the typo in 6stack-digout model name.
- Added description for missing models in ALSA-Configuration.txt.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ATIIXP-modem driver
I didn't actually test whether the modem works, but at least the driver
loads and initializes fine.  Please consider inclusion.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Trident driver
Shut up compile warnings about uninitialized variables.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds resume support to the SigmaTel HDA patch. Please apply.
Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA Codec driver
Adds 6/8 channel support to the SigmaTel HDA patch. Please apply.
Signed-off-by: Matt <matt@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB generic driver
On the SB Audigy 2 NX, capturing with sample rates that are not a
multiple of 48 kHz does not seem to work, so disable it.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

USB generic driver
Add support for endpoints with bInterval > 1, and decoding of the
wMaxPacketSize field of high-speed endpoints.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

HDA Codec driver
- Fixed oops with ALC880 auto-config mode
- Fixed a wrong config table entry for ALC880
Signed-off-by: Takashi Iwai <tiwai@suse.de>

AK4114 receiver
- wake_up(&runtime->sleep) is already called in snd_pcm_post_stop()
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If we haven't configured the qla24xx driver, then the Makefile shouldn't
do it for us.

This also means that we can avoid the unnecessary selection of FC_ATTRS.

Debugged by James Bottomley

My fairly ordinary x86 test box gets stuck during reboot on the
wait_for_completion() in ide_do_drive_cmd():
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

8xx is not BROKEN anymore.
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On 8xx, in the case where a pagefault happens for a process who's not
the owner of the vma in question (ptrace for instance), the flush
operation is performed via the physical address.

Unfortunately, that results in a strange, unexplainable "icbi"
instruction fault, most likely due to a CPU bug (see oops below).

Avoid that by flushing the page via its kernel virtual address.

Oops: kernel access of bad area, sig: 11 [#2]
NIP: C000543C LR: C000B060 SP: C0F35DF0 REGS: c0f35d40 TRAP: 0300 Not tainted
MSR: 00009022 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 10
DAR: 00000010, DSISR: C2000000
TASK = c0ea8430[761] 'gdbserver' THREAD: c0f34000
Last syscall: 26
GPR00: 00009022 C0F35DF0 C0EA8430 00F59000 00000100 FFFFFFFF 00F58000
00000001
GPR08: C021DAEF C0270000 00009032 C0270000 22044024 10025428 01000800
00000001
GPR16: 007FFF3F 00000001 00000000 7FBC6AC0 00F61022 00000001 C0839300
C01E0000
GPR24: 00CD0889 C082F568 3000AC18 C02A7A00 C0EA15C8 00F588A9 C02ACB00
C02ACB00
NIP [c000543c] __flush_dcache_icache_phys+0x38/0x54
LR [c000b060] flush_dcache_icache_page+0x20/0x30
Call trace:
[c000b154] update_mmu_cache+0x7c/0xa4
[c005ae98] do_wp_page+0x460/0x5ec
[c005c8a0] handle_mm_fault+0x7cc/0x91c
[c005ccec] get_user_pages+0x2fc/0x65c
[c0027104] access_process_vm+0x9c/0x1d4
[c00076e0] sys_ptrace+0x240/0x4a4
[c0002bd0] ret_from_syscall+0x0/0x44
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>