Simple interface to allow changing network device scheduling weight
with sysfs. Please consider this for 2.6.12, since risk/impact is small.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Gabor Fekete <gfekete@cc.jyu.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Not that there might be many of them on the planet, but at least RMK
apparently has one.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Giorgio Padrin

The patch completes I2S GPIO alternate functions for PXA27x, adding I2S_SYSCLK.
File: pxa-regs.h .

Signed-off-by: Giorgio Padrin
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Kprobes was eating the hardware instruction and data address
breakpoint exceptions.  This patch fixes it; kprobes doesn't use those
exceptions at all and should ignore them.
Signed-off-by: Ananth N Mavinakayanahalli <amavin@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

if num has a value of -1, accessing the digits[] array will fail and the
format string will be printed in funny way, or not at all. This happens if
one prints negative numbers.
Just change the code to match lib/vsprintf.c
asm/div64.h cant be used because u64 maps to u32 for this build.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The ARM copypage changes in 2.6.12-rc4-git1 removed the preempt locking
from the copypage functions which broke the XScale implementation.
This patch fixes the locking on XScale and removes the now unneeded
minicache code.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>
Checked-by: Richard Purdie

We should never apply a lookup intent to anything other than the last
path component in an open(), create() or access() call.

Introduce the helper nfs_lookup_check_intent() which always returns
zero if LOOKUP_CONTINUE or LOOKUP_PARENT are set, and returns the
intent flags if we're on the last component of the lookup.
By doing so, we fix a bug in open(O_EXCL), where we may end up
optimizing away a real lookup of the parent directory.

Problem noticed by Linda Dunaphant <linda.dunaphant@ccur.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

At least some VIA chipsets require the fixup even in IO-APIC mode.

This was found and debugged with the patient assistance of Stian
Jordet <liste@jordet.nu> on an Asus CUV266-DLS motherboard.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch disables the scroll feature on AT keyboards by default, because
it causes the numbers of mouse devices to shift, breaking user setups.
Signed-off-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6
transition.

Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage
for unified caches") triggered this bug and 405EP boards don't boot
anymore.
Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In file included from arch/i386/kernel/smp.c:235:
include/asm-i386/mach-numaq/mach_ipi.h:4: warning: `send_IPI_mask_sequence'
declared inline after its definition
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[AGPGART] Replace check_bridge_mode() with (bridge->mode & AGSTAT_MODE_3_0).

As mentioned earlier, the current check_bridge_mode() code assumes
that AGP bridges are PCI devices.  This isn't always true.  Definitely
not for HP zx1 chipset and the same seems to be the case for SGI's AGP
bridge.

The patch below fixes the problem by picking up the AGP_MODE_3_0 bit
from bridge->mode.  I feel like I may be missing something, since I
can't see any reason why check_bridge_mode() wasn't doing that in the
first place.  According to the AGP 3.0 specs, the AGP_MODE_3_0 bit is
determined during the hardware reset and cannot be changed, so it
seems to me it should be safe to pick it up from bridge->mode.

With the patch applied, I can definitely use AGP acceleration both
with AGP 2.0 and AGP 3.0 (one with an Nvidia card, the other with an
ATI FireGL card).

Unless someone spots a problem, please apply this patch so 3d
acceleration can work on zx1 boxes again.

This makes AGP work again on machines with an AGP bridge that isn't a
PCI device.
Signed-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Signed-off-by: Dave Jones <davej@redhat.com>

When Linux is running on the Xen virtual machine monitor, physical
addresses are virtualised and cannot be directly referenced by the AGP
GART.  This patch fixes the GART driver for Xen by adding a layer of
abstraction between physical addresses and 'GART addresses'.

Architecture-specific functions are also defined for allocating and freeing
the GATT.  Xen requires this to ensure that table really is contiguous from
the point of view of the GART.

These extra interface functions are defined as 'no-ops' for all existing
architectures that use the GART driver.
Signed-off-by: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] sgi-agp: fixes a problem with accessing GART memory in sgi_tioca_insert_memory and sgi_tioca_remove_memory

This patch fixes a problem with accessing GART memory in
sgi_tioca_insert_memory and sgi_tioca_remove_memory.

 sgi-agp.c |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)
Signed-off-by: Mike Werner <werner@sgi.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Attached is a small patch for i945G support against 2.6.11.11.

From: Alan Hourihane <alanh@fairlite.demon.co.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

I'm not sure why this issue is suddenly showing, but without this
patchlet, the zx1 config won't compile anymore (e.g., to see the
compilation-error, look for "***" in [1]).

[1] http://www.gelato.unsw.edu.au/kerncomp/results//2005-06-06-17-00/zx1_defconfig-log.htmlSigned-off-by: David Mosberger-Tang <davidm@hpl.hp.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On ppc32, <asm/sigcontext.h> uses __user, but doesn't directly include
<linux/compiler.h>.  This adds that in.  Without this, glibc will not
compile.
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David S. Miller <davem@davemloft.net>

On some 5701 devices with older bootcode, the LED configuration bits in
SRAM may be invalid with value zero. The fix is to check for invalid
bits (0) and default to PHY 1 mode. Incorrect LED mode will lead to
error in programming the PHY.

Thanks to Grant Grundler for debugging the problem.

>From Grant:
| In May, 2004,  tg3 v3.4 changed how MAC_LED_CTRL (0x40c) was getting
| programmed and how to determine what to program into LED_CTRL. The new
| code trusted NIC_SRAM_DATA_CFG (0x00000b58) to indicate what to write
| to LED_CTRL and MII EXT_CTRL registers. On "IOX Core Lan", SRAM was
| saying MODE_MAC (0x0) and that doesn't work.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It was checking the "GET" function pointer instead of
the "SET" one.  Looks like a cut&paste error :-)
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure that binfmt_flat passes the correct flags into do_mmap().  nommu's
validate_mmap_request() will simple return -EINVAL if we try and pass it a
flags value of zero.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

__do_follow_link() passes potentially worng vfsmount to touch_atime().  It
matters only in (currently impossible) case of symlink mounted on something,
but it's trivial to fix and that actually makes more sense.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Cosmetical cleanups - __follow_mount() calls in __link_path_walk() absorbed
into do_lookup().

Obviously equivalent transformation.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

follow_mount() made void, reordered dput()/mntput() in it.

follow_dotdot() switched from struct vfmount ** + struct dentry ** to
struct nameidata *; callers updated.

Equivalent transformation + fix for too-early-mntput() race.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Conditional mntput() moved into __do_follow_link().  There it collapses with
unconditional mntget() on the same sucker, closing another too-early-mntput()
race.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Getting rid of sloppy logics:

a) in do_follow_link() we have the wrong vfsmount dropped if our symlink
had been mounted on something.  Currently it worls only because we never
get such situation (modulo filesystem playing dirty tricks on us).  And
it obfuscates already convoluted logics...

b) same goes for open_namei().

c) in __link_path_walk() we have another "it should never happen" sloppiness -
out_dput: there does double-free on underlying vfsmount and leaks the covering
one if we hit it just after crossing a mountpoint.  Again, wrong vfsmount
getting dropped.

d) another too-early-mntput() race - in do_follow_mount() we need to postpone
conditional mntput(path->mnt) until after dput(path->dentry).  Again, this one
happens only in it-currently-never-happens-unless-some-fs-plays-dirty
scenario...
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

shifted conditional mntput() into do_follow_link() - all callers were doing
the same thing.

Obviously equivalent transformation.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In open_namei() exit_dput: we have mntput() done in the wrong order -
if nd->mnt != path.mnt we end up doing
	mntput(nd->mnt);
	nd->mnt = path.mnt;
	dput(nd->dentry);
	mntput(nd->mnt);
which drops nd->dentry too late.  Fixed by having path.mnt go first.
That allows to switch O_NOFOLLOW under if (__follow_mount(...)) back
to exit_dput, while we are at it.

Fix for early-mntput() race + equivalent transformation.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In open_namei() we take mntput(nd->mnt);nd->mnt=path.mnt; out of the if
(__follow_mount(...)), making it conditional on nd->mnt != path.mnt instead.

Then we shift the result downstream.

Equivalent transformations.
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>