Merge tag 'bitmain-soc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain into arm/dt

Bitmain SoC changes for v5.2:

- Added GPIO support for BM1880 SoC based on Designware APB GPIO
  controller
- Added GPIO line names for Sophon Edge board based on 96Boards CE
  specification for accessing GPIOs using line names from userspace
  tools like MRAA.
- Added pinctrl node for BM1880 SoC as a child node of sctrl syscon
  node.
- Added pinctrl support to UARTs exposed on the Sophon Edge board.

* tag 'bitmain-soc-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain:
  arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
  arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
  arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
  arm64: dts: bitmain: Add GPIO support for BM1880 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt64-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.2:
 - Add initial i.MX8MM SoC and EVK board support.
 - Enable OPP table for cpufreq support on i.MX8MQ, i.MX8QXP and
   i.MX8MM.
 - A series from Andrey Smirnov to enable PCIe support for i.MX8MQ.
 - Add TMU (Thermal Management Unit) device on i.MX8MQ for managing
   thermal of CPU, GPU, and VPU.
 - Add SDMA and SAI2 devices for i.MX8MQ SoC and enable wm8524 audio
   support on EVK board.
 - Add LPUART, OCOTP and GPU devices for i.MX8MQ SoC.
 - Add initial i.MX8MQ based Zii Ultra board support
 - Add SCU general IRQ and watchdog support for i.MX8QXP.
 - Add audio related devices and PMU for LS1028A.
 - Enable SATA and cpuidle support for LX2160A.
 - Other small random updates.

* tag 'imx-dt64-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  arm64: dts: lx2160a: add cpu idle support
  arm64: dts: imx8mq: fix GPU clock frequency
  arm64: dts: fsl: imx8mq-evk: link regulator to GPU domain
  arm64: dts: imx8mm: Add cpufreq properties
  arm64: dts: imx8qxp-mek: Add i2c1 with pca9646
  arm64: dts: imx8qxp: enable scu general irq channel
  arm64: dts: imx8mq: add GPU node
  arm64: dts: imx: add Zii Ultra board support
  arm64: dts: imx8mq: fix higher CPU operating point
  arm64: dts: imx8mq-evk: Enable PCIE0 interface
  arm64: dts: imx8mq: Add nodes for PCIe IP blocks
  arm64: dts: imx8mq: Combine PCIE power domains
  arm64: dts: imx8mq: Add a node for SRC IP block
  arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible
  arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes
  arm64: dts: lx2160a: add sata node support
  arm64: dts: ls1028a: Corrected the SATA ecc address
  arm64: dts: imx8mq: Change ahb clock for imx8mq
  arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
  arm64: dts: imx8qxp: add system controller watchdog support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: lpc32xx: devicetree updates for v5.2

Here are the changes for ARM NXP LPC32xx devicetree files:

* disabled I2S and MAC controllers by default,
* set default #address-cells = <1> / #size-cells = <0> for SPI slaves,
* fix notation of hexadecimal values,
* switched lpc32xx.dtsi to SPDX license identifier.

* tag 'lpc32xx-dt-for-5.2' of https://github.com/vzapolskiy/linux-lpc32xx:
  ARM: dts: lpc32xx: use SPDX license identifier
  ARM: dts: lpc32xx: add address and size cell values to SPI controller nodes
  ARM: dts: lpc32xx: disable MAC controller by default
  ARM: dts: lpc32xx: disable I2S controllers by default
  ARM: dts: lpc32xx: change hexadecimal values to lower case
Signed-off-by: Olof Johansson <olof@lixom.net>

Add pinctrl support for UARTs exposed on the Sophon Edge board.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Add pinctrl support for Bitmain BM1880 SoC. This SoC only supports
pinmuxing and the pinctrl registers are part of the sctrl block.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Add GPIO line names for Sophon Edge board based on BM1880 SoC from
Bitmain. Line names are based on the board schematics as well as the
96Boards Consumer Edition specification v1.0.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Add GPIO support for Bitmain BM1880 SoC based on Designware APB GPIO
controller IP. IP exposes 3 GPIO controllers with a total of 72 pins.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'samsung-dt64-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.2, second round

DTC warning fixes: move fixed-clocks, timer and pmu nodes outside of soc
node.

* tag 'samsung-dt64-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Move fixed-clocks out of soc
  arm64: dts: exynos: Move pmu and timer nodes out of soc
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.2, second round

1. DTC warning fixes: move timer and pmu nodes outside of soc node,
2. Properly override MDMA0 on Universal C210,
3. Fix camera clock provider (to match bindings and driver) on Goni.

* tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: s5pv210: Fix camera clock provider on Goni board
  ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
  ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
  ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
  ARM: dts: exynos: Move pmu and timer nodes out of soc
Signed-off-by: Olof Johansson <olof@lixom.net>

It is discouraged to have OF partitions as subnodes directly
under the device, create a "partitions" subnode and put the
partitions inside it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm ARM64 Updates for v5.2 - Part 2

* Add ADC temp for temp alarm node on PM8998
* Add ref clks for DSI PHYs on SDM845 and MSM8916
* Add CPU capacity and topology on SDM845
* Add display and gpu related nodes on MSM8996
* Add sound and hdmi display support on DB820C
* Fixup thermal nodes on MSM8998 platform

* tag 'qcom-arm64-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
  arm64: dts: msm8998: thermal: Fix number of supported sensors
  arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
  arm64: dts: db820c: Add sound card support
  arm64: dts: apq8096-db820c: Add HDMI display support
  arm64: dts: Add Adreno GPU definitions
  arm64: qcom: msm8996.dtsi: Add Display nodes
  arm64: dts: msm8996: Add display smmu node
  arm64: dts: msm8996: Add graphics smmu node
  arm64: dts: sdm845: Add CPU capacity values
  arm64: dts: sdm845: Add CPU topology
  arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs
  arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY
  arm64: dts: qcom: pm8998: Use ADC temperature to temp-alarm node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm Device Tree Changes for v5.2 - Part 2

* Add cxo_board as ref clk for DSI phy

* tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Bulk conversion of remaining gpios to the helper constants, new peripherals
for the rk3328-roc-cc and some minor fixes for rk3399 and rockpro64.

* tag 'v5.2-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
  arm64: dts: rockchip: fix cts, rts pin assign of UART3 for rk3399
  arm64: dts: rockchip: bulk convert gpios to their constant counterparts
  arm64: dts: rockchip: enable display nodes on rk3328-roc-cc
  arm64: dts: rockchip: eMMC additions for rk3328-roc-cc
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Much love for rk3288 in general (power coefficients for the scheduler)
and veyron chromeos devices in particular (regulators, suspend, cleanups)
and bulk conversion of the remaining gpios to the helper constants denoting
the iomux.

* tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: vdd_gpu off in suspend for rk3288-veyron
  ARM: dts: rockchip: vcc33_ccd off in suspend for rk3288-veyron-chromebook
  ARM: dts: rockchip: Add DDR retention/poweroff to rk3288-veyron hogs
  ARM: dts: rockchip: Add dynamic-power-coefficient for rk3288
  ARM: dts: rockchip: bulk convert gpios to their constant counterparts
  ARM: dts: rockchip: Add BT_EN to the power sequence for veyron
  ARM: dts: rockchip: Remove unnecessary setting of UART0 SCLK rate on veyron
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v5.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- use assinged-clocks and assigned-clock-parents
- fix compatible for SoC to a72
- add pmu nodes

mt8183:
- add sysirq binding
- add pinctrl dt header file

mt7629:
- update bindings description fo sysirq, uart and scpsys

mt8516:
- add binding description for watchdog, timer, uart and sysirq

* tag 'v5.1-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8173: add pmu nodes for mt8173
  arm64: dts: mt8173: correct cpu type of cpu2 and cpu3 to cortex-a72
  dt-bindings: irq: mtk,sysirq: add support for MT8516
  dt-bindings: serial: mtk-uart: add support for MT8516
  dt-bindings: timer: mtk-timer: add support for MT8516
  dt-bindings: wdog: mtk-wdt: add support for MT851
  dt-bindings: soc: fix a typo for MT7623A
  dt-bindings: mediatek: update bindings for MT7629 SoC
  arm64: dts: mt8183: add pinctrl file
  dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
  arm64: dts: Using standard CCF interface to set vcodec clk
Signed-off-by: Olof Johansson <olof@lixom.net>

The old "cooling-{min,max}-state" properties for thermal bindings were
ratified to "cooling-{min,max}-level" by commit eb168b70 ("of:
thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
which were later removed entirely by commit e04907db ("dt-bindings:
thermal: Remove "cooling-{min|max}-level" properties").

The pwm-fan binding, however, was apparently in-flight in parallel with
that ratification, and so managed to introduce an example of the old
properties which escaped the scope of the later cleanup and has thus
continued to be dutifully copied for new boards despite being useless.
Clean up these remaining undocumented anachronisms to minimise any
further confusion.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 5.2 (part 1)

Add wlan_disable signal hog for rfkill signal on clearfog-gt-8k
(Armada 8040 based board)

* tag 'mvebu-dt64-5.2-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: clearfog-gt-8k: add wlan_disable signal hog
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 5.2 (part 1)

 - Add interrupt support for wathdog on Armada 38x

* tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada-38x: add interrupts for watchdog
Signed-off-by: Olof Johansson <olof@lixom.net>

* 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91-vinco: use SPDX-License-Identifier
  ARM: dts: atmel boards: use SPDX-License-Identifier
  ARM: dts: at91sam9xe: use SPDX-License-Identifier
  ARM: dts: sama5d{2,4}: use SPDX-License-Identifier
  ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem
  ARM: dts: at91: sama5d2: add labels to soc dtsi for derivative boards
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dts-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm Device Tree Changes for v5.2

* Add gpio ranges for Qualcomm platforms
* Correct the IPQ4019 PCIe BAR range

* tag 'qcom-dts-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: ipq4019: enlarge PCIe BAR range
  ARM: dts: qcom: pma8084: add gpio-ranges
  ARM: dts: qcom: msm8660: add gpio-ranges
  ARM: dts: qcom: mdm9615: add gpio-ranges
  ARM: dts: qcom: apq8064: add gpio-ranges
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt

Qualcomm ARM64 Updates for v5.2

* Add gpio ranges for Qualcomm platforms
* Fix MSM8998 BLSP2 I2C5 address
* Add MSM8998 UFS nodes and associated information
* Add SDM845 interconnect header and usage
* Add ADSP and CDSP PAS, RMTFS memory, and UFS phy reset on SDM845
* Update reserved memory map on SDM845
* Add QCS404 spmi regulators, ethernet, bluetooth, and uart3
* Remove remotely-controlled property as default for BAM on QCS404
* Add spmi regulators on PMS405
* Fixup QCS404 l3 voltages and regulator supply names
* Fixup thermal trip names on Qualcomm platforms
* Add thermal sensors on Qualcomm platforms
* Remove invalid efficiency property on MSM8998
* Change QCS404-evb compatible to help distinguish platforms
* Add rpmhd header file and convert to use definitions on SDM845
* Add interconnect header file on SDM845
* Add PMS405 ADC binding

* tag 'qcom-arm64-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
  arm64: dts: sdm845: Introduce ADSP and CDSP PAS nodes
  arm64: dts: qcom: sdm845: Define rmtfs memory
  arm64: dts: qcom: sdm845: Update reserved memory map
  arm64: dts: sdm845: Add UFS PHY reset
  arm64: dts: qcom: msm8998: Fix blsp2_i2c5 address
  arm64: dts: qcom: qcs404-evb: Change the compatible to distinguish platforms
  arm64: dts: qcom: pmi8998: add gpio-ranges
  arm64: dts: qcom: pmi8994: add gpio-ranges
  arm64: dts: qcom: pm8998: add gpio-ranges
  arm64: dts: qcom: pm8005: add gpio-ranges
  arm64: dts: msm8998: Add UFS phy reset
  arm64: dts: msm8916: thermal: Convert camera trip type to hot
  arm64: dts: msm8996: thermal: Make trip names consistent
  arm64: dts: msm8916: thermal: Make trip names consistent
  arm64: dts: msm8998: thermal: Make trip names consistent
  arm64: dts: sdm845: thermal: Add temperature sensors near major peripherals
  arm64: dts: msm8998: thermal: Add temperature sensors near major peripherals
  arm64: dts: msm8998: thermal: GPU has two sensors, add the second
  arm64: dts: msm8998: thermal: Fix the gpu sensor number
  arm64: dts: msm8998: thermal: Fix the cpu sensor numbers
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX arm device tree update for 5.2:
 - New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann,
   imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4.
 - Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL.
 - Use new 'reset-gpios' property describing CODEC reset pin for board
   mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart.
 - Specify viewport count for PCIE block on SoC imx7d and imx6qdl.
 - Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs.
 - Rename MMDC memory controller device to be generic and add MMDC
   device for imx7ulp SoC.
 - Add OCOTP device support for imx7ulp SoC.
 - Improve ZII board DTS by switching to SPDX identifier and using generic
   device node name.
 - A series from Rui Miguel Silva to add various media related devices
   for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board.
 - Random small updates on various board support.

* tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (59 commits)
  ARM: dts: imx7s: Specify #io-channel-cells in ADC nodes
  ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0
  ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN
  ARM: dts: Add support for ZII i.MX7 RPU2 board
  ARM: dts: bugfix tqma7 soft reset issue
  ARM: dts: imx53: Add Menlosystems M53 board
  ARM: dts: imx53: Rename M53 SoM touchscreen node
  ARM: dts: imx6dl-sabreauto: update opp table for auto part
  ARM: dts: imx: Use generic node names for Zii dts
  ARM: dts: imx: Switch Zii dts to SPDX identifier
  ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend
  ARM: dts: imx6q-logicpd: Enable Analog audio capture
  ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device
  ARM: dts: imx50: Add Kobo Aura DTS
  ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name
  ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name
  ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name
  ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
  ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
  ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-bindings-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.2:
 - Add vendor prefix for TQ Systems GmbH, Rakuten Kobo and Menlo Systems
   GmbH.
 - Add DT schema for SoC i.MX8MM and i.MX50, and board ZII VF610, VF610
   SPB4, i.MX7 RPU2, i.MX7S TQ MBa7, M53 Menlo and Eckelmann ci4x10.
 - Update imx-scu bindings on resource table and general interrupt
   support.
 - Add bindings for i.MX MMDC memory controller.
 - Update i.MX7D ADC bindings to add missing '#io-channel-cells'
   property.

* tag 'imx-bindings-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: iio: imx7d-adc: Add #io-channel-cells to required
  dt-bindings: arm: fsl: Add support for ZII i.MX7 RPU2 board
  dt-bindings: arm: fsl: Add devicetree binding for M53 Menlo board.
  dt-bindings: fsl: scu: add general interrupt support
  dt-bindings: arm: fsl: Add i.MX50 based boards
  dt-bindings: Add vendor prefix for Rakuten Kobo, Inc.
  dt-bindings: arm: add TQ boards
  dt-bindings: add vendor prefix for TQ Systems GmbH
  dt-bindings: arm: fsl: Add support for ZII VF610 SPB4
  dt-bindings: arm: fsl: Add supported ZII VF610 boards to DT schema
  dt-bindings: arm: imx: Add the soc binding for imx8mm
  dt-bindings: arm: fsl: Add devicetree binding for Eckelmann ci4x10
  dt-bindings: memory-controllers: freescale: add MMDC binding doc
  of: Add vendor prefix for Menlo Systems GmbH
  bindings: fsl-imx-sdma: Document fsl,imx8mq-sdma compatbile string
  dt-bindings: firmware: imx-scu: add new resources to scu resource table
  dt-bindings: firmware: imx-scu: remove unused resources from scu resource table
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.2, round 2
- add display/gfx support for G12a boards
- enable USB for g12a boards

* tag 'amlogic-dt64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits)
  arm64: dts: meson-g12a-u200: Add support for Video Display
  arm64: dts: meson-g12a-sei510: Add support for Video Display
  arm64: dts: meson-g12a-x96-max: Add support for Video Display
  arm64: dts: meson-g12a: Add AO-CEC nodes
  arm64: dts: meson-g12a: Add VPU and HDMI related nodes
  arm64: dts: meson-g12a-x96-max: Enable USB
  arm64: dts: meson-g12a-u200: Enable USB
  arm64: dts: meson-g12a-sei510: Enable USB
  arm64: dts: meson-g12a-sei510: Add ADC Key and BT support
  arm64: dts: meson-g12a-u200: add regulators
  arm64: dts: meson: g12a: Add mali-g31 gpu node
  arm64: dts: meson: g12a: Add G12A USB nodes
  arm64: dts: meson: g12a: Add SAR ADC node
  dt-bindings: power: amlogic, meson-gx-pwrc: Add G12A compatible
  arm64: dts: meson-gxm: Add Mali-T820 node
  dt-bindings: gpu: mali-midgard: Add resets property
  dt-bindings: clock: meson8b: export the video decoder clocks
  dt-bindings: clock: meson8b: export the VPU clock
  dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN
  dt-bindings: clock: meson8b: drop the "ABP" clock definition
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.2, round 2
- enable RTC on odroid-c1, ec100
- meson8: add internal clock measurer

* tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroid-c1: prepare support for the RTC
  ARM: dts: meson8b: ec100: enable the RTC
  ARM: dts: meson: add support for the RTC
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Bindings Updates for v5.2

* R-Car M3-N (r8a77965) SoC
  - Remove non-existent A3IR power domain

* Add vendor prefix for Silicon Linux

* tag 'renesas-dt-bindings-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: power: r8a77965: Remove non-existent A3IR power domain
  dt-bindings: Add vendor prefix for Silicon Linux.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.2

* R-Car E2 (r8a7794) based Alt board
  - Enable USB and DA9063 PMIC

* R-Car V2H (R8A77920) based Blanche board
  - Enable IIC3 and DA9063 PMIC

* RZ/G1C (r8a77470) based iWave SBC
  - Enable HDMI, USB Phy[01], USB2.0 Host and HS-USB

* RZ/G1C (r8a77470) SoC
  - Describe DU, VIN, PWM and HSCIF, USB PHY, USB2.0 Host and HSUSB in DT

* RZ/A1H (R7S7210) based rskrza1 board
  - Enable remaining LEDs and I2C

* R-Mobile A1 (r8a7740) based ape6evm,
  R-Car H1 (r8a7779) based marzen,
  R-Car M1A (R8A7778) based bockw and
  Emma Mobile EV2 based kzm9d boads
  - Tidy up bootargs

* R-Mobile A1 (r8a7740) based ape6evm
  - Enable NOR FLASH

* tag 'renesas-arm-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits)
  ARM: dts: ape6evm: Reorder bootargs
  ARM: dts: marzen: Add rw to bootargs and use ip=dhcp
  ARM: dts: bockw: Reorder bootargs
  ARM: dts: kzm9d: Add rw parameter to bootargs
  ARM: dts: iwg23s-sbc: Enable HS-USB
  ARM: dts: r8a77470: Add HSUSB device nodes
  ARM: dts: iwg23s-sbc: Enable USB USB2.0 Host
  ARM: dts: r8a77470: Add USB2.0 Host (EHCI/OHCI) device
  ARM: dts: iwg23s-sbc: Enable USB Phy[01]
  ARM: dts: r8a77470: Add USB PHY DT support
  ARM: dts: r8a77470: Add VIN support
  ARM: dts: r8a77470: Add PWM support
  ARM: dts: r8a77470: Add HSCIF support
  ARM: dts: alt: Enable USB support
  ARM: dts: rskrza1: Add remaining LEDs
  ARM: dts: rskrza1: Add I2C support
  ARM: dts: iwg23s-sbc: Add HDMI support
  ARM: dts: r8a77470: Add DU support
  ARM: dts: ape6evm: Add NOR FLASH
  ARM: dts: alt: Add DA9063 PMIC node
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt2-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v5.2

* R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) SoCs
  - Describe CMT devices in DT

* R-Car M3-N (r8a77965) SoC
  - Remove unecessary reg-names of display node

* R-Car V3H (r8a77980) SoC
  - Add missing "renesas,id" property to VIN of device tree

* RZ/G2E (r8a774c0) based CAT874 board
  - Add USB-HOST support

* tag 'renesas-arm64-dt2-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77980: Add "renesas,id" to VIN
  arm64: dts: renesas: r8a77965: Remove reg-names of display node
  arm64: dts: renesas: r8a77990: Add CMT device nodes
  arm64: dts: renesas: r8a77965: Add CMT device nodes
  arm64: dts: renesas: r8a7795: Add CMT device nodes
  arm64: dts: renesas: cat874: Add USB-HOST support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner H3/H5 changes for 5.2

Our usual bunch of changes shared between arm and arm64, the most notable
one being:
  - Fix of improper usage of DT bindings, thanks to the DT validation
  - Add the SID for the H3 and H5
  - New board: RerVision H3-DVK

* tag 'sunxi-h3-h5-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i: mapleboard: Remove cd-inverted
  ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI
  ARM: dts: sun8i: h3: bluetooth for Banana Pi M2 Zero board
  ARM: dts: sun8i: h3: Add default dr_mode
  ARM: dts: sun8i: h3: Refactor the pinctrl node names
  ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry
  ARM: dts: sunxi: h3/h5: Add device node for SID
  ARM: dts: sun8i-h3: Add support for the RerVision H3-DVK board
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner arm64 DT changes for 5.2

Our usual bunch of patches, the most notable one being:
  - Fixing the DTC warnings
  - Fix DT bindings not being properly respected, thanks to the DT
    validation
  - New Board: Oceanic 5205, Beelink GS1, Orange Pi3

* tag 'sunxi-dt64-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (22 commits)
  arm64: dts: allwinner: a64-amarula-relic: Add OV5640 camera node
  arm64: dts: allwinner: a64: Add pinmux setting for CSI MCLK on PE1
  arm64: dts: allwinner: Fix DE2 bus node name
  arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI
  arm64: dts: allwinner: h6: Add MMC1 pins
  arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
  arm64: dts: allwinner: h6: Introduce Beelink GS1 board
  dt-bindings: vendor-prefixes: add AZW
  arm64: dts: allwinner: h6: move MMC pinctrl to dtsi
  arm64: dts: allwinner: h6: Add device node for SID
  arm64: dts: allwinner: a64: Fix the Codec I2S binding
  arm64: dts: allwinner: a64: Add default dr_mode
  arm64: dts: allwinner: Fix pinctrl node names
  arm64: dts: allwinner: a64: Add missing PIO clocks
  arm64: dts: allwinner: a64: Fix display pipeline endpoints
  arm64: dts: allwinner: a64: Fix the TCON output clock
  arm64: dts: allwinner: h6: Add Video Engine node
  arm64: dts: allwinner: a64: Add cross links for the mixers
  arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support
  dt-bindings: Add vendor prefix for oceanic
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT changes for 5.2

This PR is pretty significant, but it been mostly about:
  - Fixing the DTC warnings in most of our DT. We're now down to 2
    warnings, from several thousands.
  - Fixing a good number of minor issues, typos, and so on thanks to the DT
    validation tools
  - Describe the MBUS controller and the special DMA RAM mapping on the A13
  - Add support for the LRADC on the A83t
  - Add support for the I2C bus used for the PMIC on the A33
  - Start using the DT annotation /omit-if-no-ref/ on our pinctrl nodes

* tag 'sunxi-dt-for-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (65 commits)
  ARM: dts: sun8i: a83t: Enable USB OTG controller on some boards
  ARM: dtsi: axp81x: add USB power supply node
  ARM: dts: sun5i: Reorder pinctrl nodes
  ARM: dts: sun6i: i7: Remove useless property
  ARM: dts: sun4i: lime: Fix the USB PHY ID detect GPIO properties
  ARM: dts: sun4i: protab2: Remove stale pinctrl-names entry
  ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI
  ARM: dts: sun8i: v40: bananapi-m2-berry: Sort device node dereferences.
  ARM: dts: sun5i: Add the MBUS controller
  dt-bindings: sunxi: Add compatible for OrangePi 3 board
  ARM: dts: sun8i: a83t: Add I2C2 pinmux setting for PE pins
  dt-bindings: arm: sunxi: Add Beelink GS1 board
  ARM: dts: sun8i: tbs-a711: Add support for volume keys input
  ARM: dts: sunxi: Add R_LRADC support for A83T
  ARM: dts: sunxi: Improve A33 NAND transfers by using DMA
  ARM: dts: sun8i: tbs-a711: Enable UART2 (for NEO-6M GPS module)
  ARM: dts: sunxi: Remove useless pinctrl nodes
  ARM: dts: sunxi: Remove pinctrl groups setting bias
  ARM: dts: sunxi: Remove useless address and size cells
  ARM: dts: sunxi: Conform to DT spec for NAND controller
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.2-rc1

This contains a bunch of changes all across the board. Perhaps the most
notable introduction here is support for the Jetson Nano Developer Kit.

* tag 'tegra-for-5.2-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Remove regulator hacks on Jetson TX2
  arm64: tegra: Enable XUSB on P2771
  arm64: tegra: Add XUSB and pad controller on Tegra186
  arm64: tegra: Add NVIDIA Jetson Nano Developer Kit support
  arm64: tegra: smaug: Move PLL power supplies to XUSB pad controller
  arm64: tegra: jetson-tx1: Move PLL power supplies to XUSB pad controller
  arm64: tegra: Enable command queue for Tegra186 SDMMC4
  arm64: tegra: Fix default tap and trim values
  arm64: tegra: Add supply for temperature sensor on P2888
  arm64: tegra: Enable aconnect, ADMA and AGIC on Jetson TX1
  arm64: tegra: Add L2 cache topology to Tegra210
  arm64: tegra: Enable CPU idle support for Shield
  arm64: tegra: Enable CPU idle support for Smaug
  arm64: tegra: Enable CPU idle support for Jetson TX1
  arm64: tegra: Add CPU idle states properties for Tegra210
  arm64: tegra: Fix timer node for Tegra210
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.2-rc1

This contains a set of changes to move PLL power supplies to the XUSB
pad controller, which is necessary to ensure the proper sequencing
during boot. Other patches in this set clean up usage of SPDX license
identifiers in device tree files as well as add support for the ACTMON
hardware on Tegra30.

* tag 'tegra-for-5.2-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add ACTMON support on Tegra30
  ARM: tegra: venice2: Move PLL power supplies to XUSB pad controller
  ARM: tegra: nyan: Move PLL power supplies to XUSB pad controller
  ARM: tegra: jetson-tk1: Move PLL power supplies to XUSB pad controller
  ARM: tegra: apalis: Move PLL power supplies to XUSB pad controller
  ARM: tegra: Remove gratuitous parentheses in SPDX license identifier
  ARM: tegra: Convert to SPDX license tags for Tegra124 Apalis
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Add am335x pinmux defines and start using them

This series of changes adds a new pinmux instance defines for am335x,
and a new AM33XX_PADCONF macro. And then the rest of the series updates
the dts files to use it.

The reasons for doing this is the pinmux configuration has been hard to
use and read. And we need to do this for eventually for moving to use
values.

This change is done one machine at a time, and can be easily reverted
as needed in case of unexpected trouble. The old macro is still working,
and we're planning to keep it around until we eventually change to use

* tag 'omap-for-v5.2/dt-am3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (38 commits)
  ARM: dts: am335x: wega: Replaced register offsets with defines
  ARM: dts: am335x: sl50: Replaced register offsets with defines
  ARM: dts: am335x: shc: Replaced register offsets with defines
  ARM: dts: am335x: sbc-t335: Replaced register offsets with defines
  ARM: dts: am335x: sancloud-bbe: Replaced register offsets with defines
  ARM: dts: am335x: phycore-som: Replaced register offsets with defines
  ARM: dts: am335x: pepper: Replaced register offsets with defines
  ARM: dts: am335x: pdu001: Replaced register offsets with defines
  ARM: dts: am335x: pcm-953: Replaced register offsets with defines
  ARM: dts: am335x: osd335x-common: Replaced register offsets with defines
  ARM: dts: am335x: osd3358-sm-red: Replaced register offsets with defines
  ARM: dts: am335x: nano: Replaced register offsets with defines
  ARM: dts: am335x: moxa-uc-8100-me-t: Replaced register offsets with defines
  ARM: dts: am335x: moxa-uc-2101: Replaced register offsets with defines
  ARM: dts: am335x: moxa-uc-2100-common: Replaced register offsets with defines
  ARM: dts: am335x: lxm: Replaced register offsets with defines
  ARM: dts: am335x: igep0033: Replaced register offsets with defines
  ARM: dts: am335x: icev2: Replaced register offsets with defines
  ARM: dts: am335x: evmsk: Replaced register offsets with defines
  ARM: dts: am335x: evm: Replaced register offsets with defines
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.2
- Add base support for Agilex platform
- Add 'cap-mmc-highspeed' Stratix10 and 32-bit SoCFPGA platform
- Increase Stratix10 QSPI support to 100 MHz

* tag 'socfpga_dts_updates_for_v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: agilex: Add initial support for Intel's Agilex SoCFPGA
  arm64: dts: stratix10: increase QSPI max frequency to 100MHz
  arm64: dts: stratix10: enable MMC highspeed support
  ARM: dts: socfpga: enable MMC highspeed support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

Ux500 DTS changes for the v5.2 kernel cycle.
- This adds the MCDE display controller and some displays.
- The Lima MALI-400 driver is added to the kernel, so
  let's add this block to the Ux500 DTS file.

* tag 'ux500-dts-v5.2-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: Ux500: Add MCDE and Samsung display
  ARM: dts: ux500: Add Mali-400
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omap4 and 5 l4 abe interconnect

This series of devicetree changes adds the l4 abe interconnect devices
and moves the devices to their right places in the hierarchy similar
to what we've already done for most l4 devices earlier. We first add
a shared omap4-mcpdm.dtsi to make adding omap4-l4-abe.dtsi easier for
the mcpdm changes. And as earlier, in case of unexpected trouble,
devices can be probed the old way by moving one device at a time to the
old place.

This series of changes depends on the ti-sysc driver changes for handling
the external optional clocks that the mcpdm relies on, and is based on
the related ti-sysc driver changes. Note that this series does not depend
on dropping of the leagcy platform data, but I already had those committed
along with the ti-sysc driver changes and noticed too late.

* tag 'omap-for-v5.2/dt-ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits)
  ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap5
  ARM: dts: Add l4 abe interconnect hierarchy and ti-sysc data for omap4
  ARM: dts: Add common mcpdm dts file for omap4
  bus: ti-sysc: Add generic enable/disable functions
  ARM: OMAP2+: Drop mcspi platform data for omap4
  ARM: OMAP2+: Drop uart platform data for dra7
  ARM: OMAP2+: Drop gpio platform data for dra7
  ARM: OMAP2+: Drop i2c platform data for dra7
  ARM: OMAP2+: Drop mmc platform data for dra7
  ARM: OMAP2+: Drop uart platform data for omap5
  ARM: OMAP2+: Drop gpio platform data for omap5
  ARM: OMAP2+: Drop i2c platform data for omap5
  ARM: OMAP2+: Drop mmc platform data for omap5
  ARM: OMAP2+: Drop uart platform data for am33xx and am43xx
  ARM: OMAP2+: Drop gpio platform data for am33xx and am43xx
  ARM: OMAP2+: Drop i2c platform data for am33xx and am43xx
  ARM: OMAP2+: Drop mmc platform data for am330x and am43xx
  ARM: OMAP2+: Drop uart platform data for omap4
  ARM: OMAP2+: Drop gpio platform data for omap4
  ARM: OMAP2+: Drop i2c platform data for omap4
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omap variants

This series of changes configures dra7 pcie x2 lane mode, configures
am43xx-epos-evm regulators and keypad wakeup source, and uses standard
reset-gpios instead of gpio-reset for n810.

We also need to split dra7 dtsi files for properly supporting dra76x
and am576 as some of the devices are different such as usb and pruss.

* tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra7: Separate AM57 dtsi files
  dt-binding: arm: omap: Add information for AM5748
  ARM: dts: omap2420-n810: Use new CODEC reset pin name
  ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
  ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory
  ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on
  ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoCs DT updates for 5.2

* Hi3660 SoC and related boards:
  - Added DMA support for the uart nodes
  - Added the asp DMA controller node
  - Replaced dma-min-chan with dma-channel-mask to follow the binding

* Hi3670 SoC and related boards:
  - Reused Hi3660 reset to support Hi3670, updated the binding
    document and added dts node
  - Reused Hi3660 MMC controller to support Hi3670, updated the
    binding document and added related nodes to support SD and WiFi
    for the SoC and hikey970 board
  - Added UFS controller node

* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: hi3670: Add UFS controller support
  arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
  arm64: dts: hi3660: Add hisi asp dma device
  arm64: dts: hi3660: Add dma to uart nodes
  arm64: dts: hisilicon: hikey970: Add SD and WiFi support
  arm64: dts: hisilicon: hi3670: Add MMC controller support
  dt-bindings: mmc: Add HI3670 MMC controller binding
  arm64: dts: hisilicon: hi3670: Add reset controller support
  dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>

arm64: dts: zynqmp: DT changes for v5.2

- Align xlnx-zynqmp-clk.h file name and separate
  binding for clock driver
- Add TI quirks to zynqmp boards

* tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: dt: Add TI PHY quirk
  dt-bindings: xilinx: Separate clock binding from firmware doc
  include: dt-binding: clock: Rename zynqmp header file
Signed-off-by: Olof Johansson <olof@lixom.net>