This patch makes some needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

According to the Bluetooth specification there is no need to fill in
the SCID on a failing response. Without a SCID the L2CAP core can't
find the corresponding request for it. In the case of the zero SCID
the signal identifier should be used to match the response to its
request.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch adds the hci_conn_change_link_key() function that allows
to trigger a link key change for an existing connection.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The usb_unlink_urb() for synchronous unlink is deprecated and should
be replaced by usb_kill_urb().
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When calling hci_conn_hash_del() the acl_num value is incremented,
but it must be decremented.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

To give higher layers like RFCOMM the possibility to use the Bluetooth
security mechanisms, they need a way to get feedback from the HCI core 
layer when they succeeded or failed. This patch introduces a callback
structure that can be used for this kind of notification.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The new Microsoft Wireless Transceiver for Bluetooth 2.0 is based on
a Broadcom chip with the HID proxy support. To initialize these kind
of devices correctly it is necessary to send HCI_Reset as the first
command.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The MODULE_PARM is deprecated now and for the Bluetooth PCCARD drivers
it should be replaced by module_param() and module_param_array().
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The vendor packet type 0xff is not handled at the moment. This patch
corrects this behaviour and also adapts the security filter for this
packet type.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When the selecting of the alternate setting for the SCO audio support
fails, the hci_usb_disconnect() will dereference a NULL pointer. To
avoid this, the isoc_iface variable must be set before releasing the
interface and unset afterwards.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The BPA 100/105 devices from Digianswer identify themself with the USB
class code for H:2 devices, but they are using quite a different host
transport protocol and so ignore them.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

into bkbits.net:/repos/l/linux-mh/bluetooth-2.6

into bkbits.net:/repos/l/linux-mh/bluetooth-2.6

New and Improved! "Woozy Numbat!"

Pick up the phone in the next two minutes and phone in your
order, and we'll throw in a second copy of Woozy Numbat,
ABSOLUTELY FREE! You too could start a Numbat farm!

Signed-off-by: cw@f00f.org
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

arch/sh/tools/machgen.sh is no longer used as it has been replaced by
arch/sh/tools/gen-mach-types
Signed-off-by: Tom Rini <trini@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Uses msleep() instead of schedule_timeout() to guarantee the task delays
as expected.  Two of the changes are reworks of previous msleep() calls
which unnecessarily added a jiffy to the parameter.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

.. broken by the rename.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This didn't show up in my "allmodconfig" tests, because the
console requires things to be built-in, not modules.

Posix timers preallocate siqueue structures during timer creation
and keep them for reuse.  This allocation happens in user context
with no locks held, however it's designated as an atomic allocation.
Loosen this restriction, and while we're at it let's do a bit of code
consolidation so signal sending uses same __sigqueue_alloc() helper.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

missing #include (and placement cleanup)
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Lindent security/security.c.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Registering a security module can be a noisy operation, esp. when it
retries registration with the primary module.  Eliminate some noise, and
distinguish the return values for register_security so a module can tell
the difference between failure modes.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename security_scaffolding_startup() to security_init().  It always
bothered me.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

trivial sound/parisc updates:

 - substream->dma_device was removed (Stuart Brady)
 - Fix module unloading (Stuart Brady)
 - Fixed the off-by-one in snd_card_harmony_rate_bits (Stuart Brady)
 - Harmony is a GSC device, not available on pure PCI machines (Matthew Wilcox)
 - Fixed module parameter descriptions for ALSA Harmony (Stuart Brady)

Currently they are in the generic setup, pretty confusing. This patch
moves the io scheduler selection into a seperate menu under block
devices.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

annotated, ioremap() use simplified (it can deal with addresses that are
not page-aligned just fine).
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When the generic IRQ stuff went in, it seems that HARDIRQ_BITS got bumped
from 9 (for ppc64) up to 12.  Consequently, the PREEMPT_ACTIVE bit is now
within HARDIRQ_MASK, and I get in_interrupt() falsely returning true when
PREEMPT_ACTIVE is set, and thus a BUG_ON tripping in arch/ppc64/mm/tlb.c.

The patch below fixes this by changing PREEMPT_ACTIVE to 0x10000000.  I
have changed the PREEMPT_ACTIVE definitions for each of the architectures
that define CONFIG_GENERIC_HARDIRQS (i386, ppc, ppc64, x86_64) and fixed
the comment in include/linux/hardirq.h.  We could perhaps move the
PREEMPT_ACTIVE definition to include/linux/hardirq.h - I don't know why it
is still per-arch.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes build of arch/ppc/kernel/irc.c when CONFIG_TAU_INT
is set.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The current "generic" implementation of IRQ probing isn't well suited
for ppc in it's current form, and causes issues with yenta_socket
(and possibly others) on pmac laptops. We didn't have a probe implementation
in the past, we probably don't need one anyway, so for now, the fix is to
make this optional and enable it on x86 and x86_64 but not ppc and ppc64
(the 4 archs to use the generic IRQ code).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch updates the G5 thermal control driver, the main change
is support for the new "PowerMac7,3" type desktops including the
dual 2.5Ghz with liquid cooling.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a typo in the zImage boot wrapper (incorrect printf).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Matthew Dharm <mdharm@momenco.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a problem when allocating the TCE tables (iommu) during
early boot on some non-LPAR machines with a lot of memory.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch, from John Rose, is the counterpart of one recently
forwarded by Greg KH.  It has the same description, but isn't the same
patch - this is the arch/ppc64 part of the change.

As an unfortunate side effect of runtime addition/removal of PCI Host Bridges,
the RPA DLPAR driver can no longer depend on the success of ioremap_explicit()
(and therefore remap_page_range()) for the case of DLPAR adding an I/O Slot.  

Without addressing this, an attempt to add the first child slot of a newly
added PHB will fail when __ioremap_explicit() determines the mappings for that
range to already exist.

For a little context, __ioremap_explicit() creates mappings for the range of a
newly added slot.  Here's why these calls will be expected to fail in some
cases.  Keep in mind that at boot-time, the PPC64 kernel calls ioremap() for
the entire range spanned by each PHB.  Consider the following scenarios of
DLPAR-adding an I/O slot.

1) Just after boot, one removes an I/O slot.  At this point the range
   associated with the parent PHB is fragmented, and the child range for the
   slot in question is iounmap()'ed.  One then re-adds the slot, at which point
   remap_page_range()/ioremap_explicit() restores the mappings that were
   previously removed.

2) One adds a new PHB, at which point the ppc64-specific addition ioremaps the
   entire PHB range.  One then performs a DLPAR-add of a child slot of that
   PHB.  At this point, mappings already exist for the range of the slot to
   be added.  So remap_page_range()/ioremap_explicit() will fail at this point.

The problem is, there's not a good way to distinguish between cases 1 and 2
from the perspective of the DLPAR driver.  Because of that, I believe the
correct solution to be:

- Removal of relevant error prints from iounmap_explicit(), which is only used
  for DLPAR.
- Removal of error code checks from the RPA driver

Here's the first of these.
Signed-off-by: John Rose <johnrose@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>