- 28 Jan, 2008 40 commits
-
-
Zhu Yi authored
Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
mabbas authored
This patch do the following 2 things: 1. Make sure we don't add rate 60M part of supported rate in proble request, some AP does not like that. 2. It is wrong to set priv->active_rate in this function, this will set it to all avialable rates which might overwrite the mode supported rate. priv->active_rate should be set by only from iwl_set_rate. Signed-off-by:
Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
This patche shortens the name of struct fw_image_desc to be struct fw_desc. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This patch adds SCD registers for 5965 Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
This patch moves 3945 SCD registers to iwl-prph.h. These registers are assigned from the periphery bus Signed-off-by:
-
Emmanuel Grumbach authored
This patch moves 4965 SCD registers to iwl-prph.h. These registers are assigned from the periphery bus Signed-off-by:
-
Tomas Winkler authored
This patch replaces wording 'restricted' with more appropriate 'nic access' NIC access is grabbed to prevent NIC entering power save mode General cleanup of iwl-io.h Signed-off-by:
-
Tomas Winkler authored
This patch renames restricted_mem suffix with more proper name targ_mem for function accessing memory on the nic in target mode Signed-off-by:
-
Tomas Winkler authored
This patch renames restricted_reg suffix with more proper name prhp for function accessing registers on the periphery bus. Signed-off-by:
-
mabbas authored
The driver drops any Rx frame larger than 2332 bytes, but with A-MSDU frame, it could be up to 4K. This patch makes sure we can process larger A-MSDU frame. Signed-off-by:
-
Tomas Winkler authored
PCI_DEVICE macro is more concise when using defualt values in device definitions Signed-off-by:
-
Tomas Winkler authored
cck_power_index_compensation variable was never used Signed-off-by:
-
Ian Schram authored
These pieces of code appear to be useless. The BUG_ON is also performed in iwl_send_cmd_async. Serious karma would be needed to enter iwl_ativate_qos with a null priv. I had a deja vu when patching this, but for the life of me I couldn't track down a similar patch. Signed-off-by:
Ian Schram <ischram@telenet.be> Signed-off-by:
-
Ian Schram authored
Moving code around, lindent, and whatnot created several places where there appeared to be an 75 column "rule" instead of 80. This patch removes those that I can spot, hopefully increasing readability. Signed-off-by:
-
Ian Schram authored
This patch shorten two comments lines in iwl-3945.c Signed-off-by:
-
Tomas Winkler authored
This patch remove cck_flag from iwl_driver_hw_info, this flag is unused after spliting the iwl-base.c Signed-off-by:
-
Tomas Winkler authored
This patch adds TGN flag to QoS parameters. This flag governs enablement of NAV shortening with CF-End and filters in 4 or 8K RX AMSDU packets Signed-off-by:
-
Tomas Winkler authored
This patch cleans up style of 'return' of rate scale 4965 functions. It renames return name variables rc to ret, change functions to void if no meaningful value was returned it add return of -EINVAL for checks of wrong arguments. Signed-off-by:
-
Tomas Winkler authored
This patch renames queue pointers to write_ptr and read_ptr instead of first_empty and last_used. This is closer to technical terminology we everyday use Signed-off-by:
-
Ian Schram authored
Correct the spelling of aqcuire. Signed-off-by:
-
Ian Schram authored
Fixing various spelling errors and typos. Mostly in comments. In total 27 words were corrected, some of which occurred more than ones. Signed-Of-By:
-
Tomas Winkler authored
This patch adds erp_ie_changed handler to iwl4956 Signed-off-by:
-
Ivo van Doorn authored
Version bump. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mattias Nissler authored
Add a flag to struct txdata_entry_desc that specifies whether an ack for the frame is to be expected. Use this flag to set the ACK bit in the tx descriptor. Previously, the ACK bit could be set incorrectly on CTS-to-self frames, so they caused retries and were reported to be failed in the txdone handlers. Signed-off-by:
Mattias Nissler <mattias.nissler@gmx.de> Signed-off-by:
-
Adam Baker authored
There is a buffer, csr_cache which is used to hold copies of data being passed to the USB stack which can get corrupted if multiple threads attempt to access CSR registers simultaneously. There is also the possibility if multiple threads try to access BBP or RF registers for the multiple USB operations needed to get interleaved leading to incorrect results. This patch introduces a mutex to prevent such simultaneous access. The interleaved access problem may also affect the PCI devices but if so that will be handled in a follow-up patch. Signed-off-by:
Adam Baker <linux@baker-net.org.uk> Signed-off-by:
-
Ivo van Doorn authored
Coverty indicated that data_desc with a single element array is bad coding style. This removes the structure and forces everybody to use __le32. Signed-off-by:
-
Mattias Nissler authored
This patch changes rt73 antenna selection to what I believe is the correct way. It also fixes a small selection bug that switched the antennas by accident. Signed-off-by:
-
Ivo van Doorn authored
With the updated antenna setup the following variables are no longer used. Signed-off-by:
-
Mattias Nissler authored
This patch changes rt61 antenna selection again. It helps at least with the rt61 pci card in my box, I hope I haven't broken behaviour on other RF chips. RF 2529 antenna setup is incomplete, we need to at code for diversity when we figure out how it is done properly. Signed-off-by:
-
Adam Baker authored
Some register accesses need rt2x00dev to be non-const they all need modifying so the prototype is consistent. Signed-off-by:
-
Ivo van Doorn authored
When registering rfkill, make sure a initial poll event is directly executed to detect the initial rfkill state and send the event to the rfkill layer. Signed-off-by:
-
Ivo van Doorn authored
input-polldev requires a correctly allocated and initialized input device to be set for the input_polled_dev->input field. Failure to do that will prevent correct polling of the device. Signed-off-by:
-
Ivo van Doorn authored
Based on investigation of the legacy drivers, I have made the following assumptions of the antenna setup: - R77 is the TX antenna configuration - RF2529 fetches default antenna selection from NIC eeprom word With these assumptions we can change the antenna configuration to correctly read both antenna setup values and correctly configure the antenna. And we can now also configure the antenna for RF2529 without a double antenna. Signed-off-by:
-
Ivo van Doorn authored
Antenna switching will be ignored when RX is enabled during the switch. Make sure we disable the RX during the switch and don't forget to reenable it later. Signed-off-by:
-
Ivo van Doorn authored
Version bump. Signed-off-by:
-
Mattias Nissler authored
In the config() handler, make sure that we do configure an antenna if the current active antenna is uninitialized. Furthermore, don't overwrite the active antenna with bogus values if we didn't touch the antenna setup. Signed-off-by:
-
Ivo van Doorn authored
Cleanup if-statements for simple 1/0 register field values. This also fixes a endian bug in rt2500usb when working with the PHY_CSR2 initialization. As well as a bug in the enabling of the LED in rt73usb. Signed-off-by:
-
Ivo van Doorn authored
When mac80211 indicates that the default antenna setup should be used _and_ that this default setup is SW_DIVERSITY. This requires sampling and storing the RSSI per antenna and check once every 2 seconds to determine if the RSSI has changed significantly. Once this is the case we should sample the other antenna for a short period and evaluate if we need to swap antenna or not. Signed-off-by:
-
Ivo van Doorn authored
rt2x00_clear_link() was becoming too large for statically inline, also it was used on a single location and shouldn't really be used anywhere else. So move the entire code into the function rt2x00lib_start_link_tuner() Signed-off-by:
-
Ivo van Doorn authored
Although ANTENNA_SW_DIVERSITY should never be send to the driver, we should still handle it to prevent bugs. But instead of defaulting to ANTENNA_HW_DIVERSITY we should default to ANTENNA_B instead. Signed-off-by:
-
