1. 17 Apr, 2012 4 commits
    • Bjørn Mork's avatar
      USB: sierra: avoid QMI/wwan interface on MC77xx · 749541d1
      Bjørn Mork authored
      These devices have a number of non serial interfaces as well.  Use
      the existing "Direct IP" blacklist to prevent binding to interfaces
      which are handled by other drivers.
      
      We also extend the "Direct IP" blacklist with with interfaces only
      seen in "QMI" mode, assuming that these devices use the same
      interface numbers for serial interfaces both in "Direct IP" and in
      "QMI" mode.
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      749541d1
    • Xi Wang's avatar
      usb: usbtest: avoid integer overflow in alloc_sglist() · 8bde9a62
      Xi Wang authored
      A large `nents' from userspace could overflow the allocation size,
      leading to memory corruption.
      
      | alloc_sglist()
      | usbtest_ioctl()
      
      Use kmalloc_array() to avoid the overflow.
      Signed-off-by: default avatarXi Wang <xi.wang@gmail.com>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8bde9a62
    • Xi Wang's avatar
      usb: usbtest: avoid integer overflow in test_ctrl_queue() · e65cdfae
      Xi Wang authored
      Avoid overflowing context.count = param->sglen * param->iterations,
      where both `sglen' and `iterations' are from userspace.
      
      | test_ctrl_queue()
      | usbtest_ioctl()
      
      Keep -EOPNOTSUPP for error code.
      Signed-off-by: default avatarXi Wang <xi.wang@gmail.com>
      Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e65cdfae
    • Alan Stern's avatar
      USB: fix deadlock in bConfigurationValue attribute method · 8963c487
      Alan Stern authored
      This patch (as154) fixes a self-deadlock that occurs when userspace
      writes to the bConfigurationValue sysfs attribute for a hub with
      children.  The task tries to lock the bandwidth_mutex at a time when
      it already owns the lock:
      
      	The attribute's method calls usb_set_configuration(),
      	which calls usb_disable_device() with the bandwidth_mutex
      	held.
      
      	usb_disable_device() unregisters the existing interfaces,
      	which causes the hub driver to be unbound.
      
      	The hub_disconnect() routine calls hub_quiesce(), which
      	calls usb_disconnect() for each of the hub's children.
      
      	usb_disconnect() attempts to acquire the bandwidth_mutex
      	around a call to usb_disable_device().
      
      The solution is to make usb_disable_device() acquire the mutex for
      itself instead of requiring the caller to hold it.  Then the mutex can
      cover only the bandwidth deallocation operation and not the region
      where the interfaces are unregistered.
      
      This has the potential to change system behavior slightly when a
      config change races with another config or altsetting change.  Some of
      the bandwidth released from the old config might get claimed by the
      other config or altsetting, make it impossible to restore the old
      config in case of a failure.  But since we don't try to recover from
      config-change failures anyway, this doesn't matter.
      
      [This should be marked for stable kernels that contain the commit
      fccf4e86 "USB: Free bandwidth when
      usb_disable_device is called."
      That commit was marked for stable kernels as old as 2.6.32.]
      Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
      Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8963c487
  2. 16 Apr, 2012 4 commits
    • Greg Kroah-Hartman's avatar
      Merge tag 'fixes-for-v3.4-rc3' of... · edffaa03
      Greg Kroah-Hartman authored
      Merge tag 'fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
      
      usb: fixes for v3.4-rc cycle
      
      Here are the fixes I have queued for v3.4-rc cycle so far.
      
      It includes fixes on many of the gadget drivers and a few
      of the UDC controller drivers.
      
      For musb we have a fix for a kernel oops when unloading
      omap2430.ko glue layer, proper error checking for pm_runtime_*,
      fix for the ULPI transfer block, and a bug fix in musb_cleanup_urb
      routine.
      
      For s3c-hsotg we have mostly FIFO-related fixes (proper TX FIFO
      allocation, TX FIFO corruption fix in DMA mode) but also a couple
      of minor fixes (fixing maximum packet size for ep0 and fix for
      big transfers with DMA).
      
      For the dwc3 driver we have a memory leak fix, a very important
      fix for USB30CV with SetFeature tests and the hability to handle
      ep0 requests bigger than wMaxPacketSize.
      
      On top of that there's a bunch of gadget driver minor fixes adding
      proper section annotations, and fixing up the sysfs interface for
      doing device-initiated connect/disconnect and so on.
      
      All patches have been pending on the mailing list for quite a while
      and look good for your for-linus branch.
      edffaa03
    • Linus Torvalds's avatar
      Linux 3.4-rc3 · e816b57a
      Linus Torvalds authored
      e816b57a
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm · 9a8e5d41
      Linus Torvalds authored
      Pull ARM fixes from Russell King:
       "Nothing too disasterous, the biggest thing being the removal of the
        regulator support for vcore in the AMBA driver; only one SoC was using
        this and it got broken during the last merge window, which then
        started causing problems for other people.  Mutual agreement was
        reached for it to be removed."
      
      * 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
        ARM: 7386/1: jump_label: fixup for rename to static_key
        ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE
        ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU
        ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus
        ARM: 7383/1: nommu: populate vectors page from paging_init
        ARM: 7381/1: nommu: fix typo in mm/Kconfig
        ARM: 7380/1: DT: do not add a zero-sized memory property
        ARM: 7379/1: DT: fix atags_to_fdt() second call site
        ARM: 7366/3: amba: Remove AMBA level regulator support
        ARM: 7377/1: vic: re-read status register before dispatching each IRQ handler
        ARM: 7368/1: fault.c: correct how the tsk->[maj|min]_flt gets incremented
      9a8e5d41
    • Linus Torvalds's avatar
      x86-32: fix up strncpy_from_user() sign error · 12e993b8
      Linus Torvalds authored
      The 'max' range needs to be unsigned, since the size of the user address
      space is bigger than 2GB.
      
      We know that 'count' is positive in 'long' (that is checked in the
      caller), so we will truncate 'max' down to something that fits in a
      signed long, but before we actually do that, that comparison needs to be
      done in unsigned.
      
      Bug introduced in commit 92ae03f2 ("x86: merge 32/64-bit versions of
      'strncpy_from_user()' and speed it up").  On x86-64 you can't trigger
      this, since the user address space is much smaller than 63 bits, and on
      x86-32 it works in practice, since you would seldom hit the strncpy
      limits anyway.
      
      I had actually tested the corner-cases, I had only tested them on
      x86-64.  Besides, I had only worried about the case of a pointer *close*
      to the end of the address space, rather than really far away from it ;)
      
      This also changes the "we hit the user-specified maximum" to return
      'res', for the trivial reason that gcc seems to generate better code
      that way.  'res' and 'count' are the same in that case, so it really
      doesn't matter which one we return.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      12e993b8
  3. 15 Apr, 2012 12 commits
  4. 14 Apr, 2012 13 commits
  5. 13 Apr, 2012 7 commits