- 27 Mar, 2013 11 commits
-
-
Jani Nikula authored
The backlight device .get_brightness callback is supposed to return the actual brightness by querying the hardware, not the cached value. See Documentation/ABI/stable/sysfs-class-backlight. The callback is there to support the actual_brightness sysfs file. With the backlight_level and backlight device brightness now in sync, one can reliably get the cached value through the brightness sysfs file. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
A single point of truth would be better than two, but achieving that would require more abstractions for CONFIG_BACKLIGHT_CLASS_DEVICE=n with not a whole lot of real benefits. Take the short route and just keep the backlight levels in sync. In particular, update backlight device brightness on opregion brightness changes. Signed-off-by:
-
Daniel Vetter authored
Now with Egbert Eich's hpd infrastructure rework merged this is dead simple. And we need this to make output detection work on SDVO - with the cleaned-up drm polling helpers outputs which claim to have hpd support are no longer polled. Now SDVO claims to do that, but it's not actually wired up. So just do it. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
When disabling a sprite, wait for the sprite to stop fetching data from memory before unpinning the fb. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Daniel Vetter authored
Noticed while reviewing the hotplug irq setup code. Just looks better. Reviewed-by:
-
Imre Deak authored
Since for_each_sg_page supports already memory w/o backing pages we can revert the corresponding workaround. This reverts commit 5bd4687e. Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Imre Deak authored
The i915 driver uses sg lists for memory without backing 'struct page' pages, similarly to other IO memory regions, setting only the DMA address for these. It does this, so that it can program the HW MMU tables in a uniform way both for sg lists with and without backing pages. Without a valid page pointer we can't call nth_page to get the current page in __sg_page_iter_next, so add a helper that relevant users can call separately. Also add a helper to get the DMA address of the current page (idea from Daniel). Convert all places in i915, to use the new API. Signed-off-by:
-
Chris Wilson authored
From the w/a database: 'To prevent false VT-d type 6 error: The primary display plane must be 256KiB aligned, and require an extra 128 PTEs of padding afterward; The sprites planes must be 128KiB aligned, and require an extra 64 PTEs of padding afterward; The cursors must be 64KiB aligned, and require an extra 2 PTEs of padding afterward.' As we use the same function to pin the primary and sprite planes, we can simply use the more strict requirements for scanouts for both. Instead of using explicit padding PTEs following the scanout objects, we should be able to use the scratch page that is always mapped into the unused PTEs to avoid the VT-d error. References: https://bugs.freedesktop.org/show_bug.cgi?id=59626 References: https://bugs.freedesktop.org/show_bug.cgi?id=59627 References: https://bugs.freedesktop.org/show_bug.cgi?id=59631Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Egbert Eich authored
Now since we have replaced the bits to show interest in hotplug IRQs we can go and nuke the 'hotplug_supported_mask'. Signed-off-by:
Egbert Eich <eich@suse.de> Acked-by:
-
Egbert Eich authored
After "Convert HPD interrupts to make use of HPD pin assignment in encoders." This function is now basically the same as i915_hpd_irq_setup(). Consolidating both functions in one requires one more check for I915_HAS_HOTPLUG(dev) in the i965 code path and one more check for IS_G4X(dev) in the i915 code path. These are considered harmless. Signed-off-by:
-
Daniel Vetter authored
This fixes a regression introduced in commit e5868a31 Author: Egbert Eich <eich@suse.de> Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda2 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich <eich@suse.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798Reviewed-by:
-
- 26 Mar, 2013 11 commits
-
-
Egbert Eich authored
This allows to enable HPD interrupts for individual pins to only receive hotplug events from lines which are connected and working. v2: Restructured initailization of const arrays following a suggstion by Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: -
Egbert Eich authored
To clean up hotplug support we add a new enum to intel_encoder: enum hpd_pin. It allows the encoder to request a hpd line but leave the details which IRQ is responsible on which chipset generation to i915_irq.c. This way requesting hotplug support will become really simple on the encoder/connector level. Signed-off-by:
-
Egbert Eich authored
It's basically identical to i915_hpd_irq_setup(). Signed-off-by:
-
Jesse Barnes authored
This will poke userspace into probing for configuration changes that may have occurred across suspend/resume. Signed-off-by:
-
Jesse Barnes authored
With the other bits in place, we can do this safely. v2: disable backlight on suspend to prevent premature enablement on resume v3: disable CRTCs on suspend to allow RTD3 (Kristen) Signed-off-by:
-
Jesse Barnes authored
Needed for VT switchless resume. v2: cursor state is now handled correctly in crtc_enable (Daniel) Signed-off-by:
-
Jesse Barnes authored
To be used to restore sprite state on resume. v2: move sprite tracking bits up so we don't track modified sprite state v3: use src_x/y in sprite suspend/resume code (Ville) Signed-off-by:
-
Jesse Barnes authored
Rather than building a config which may or may not work, let the driver build an initial fb config. This allows the driver to use the BIOS boot configuration for example, displaying kernel messages and the initial fb console on the same outputs the BIOS lit up at boot time. If that fails, the driver can still fall back the same way as the core. Signed-off-by:
Dave Airlie <airlied@gmail.com> Reviewed-by:
-
Chris Wilson authored
Wrap a preallocated region of stolen memory within an ordinary GEM object, for example the BIOS framebuffer. Signed-off-by:
-
Chris Wilson authored
There is a minute window for a race between put-fence removing the fence and for a new transaction by an external party on the GTT mmap. That is we must zap the mmap prior to removing the fence and not afterwards. Fixes regression from commit 61050808 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Apr 17 15:31:31 2012 +0100 drm/i915: Refactor put_fence() to use the common fence writing routine v2: Remember the fence to remove with a local variable (gcc) Signed-off-by:
-
Rodrigo Vivi authored
According to HSW PM programming guide, frequency bits starts at 24 instead of 25. v2: Paulo Zanoni noticed that only frequency bits can be set at GEN6_RPNSWREQ. All others are read only. CC: Ben Widawsky <ben@bwidawsk.net> CC: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Signed-off-by:
-
- 25 Mar, 2013 2 commits
-
-
Damien Lespiau authored
If TRANS_DDI_FUNC_CTL has been wrongly programmed with an incorrect port, we are currently trying to read PORT_CLK_SEL(port) with an uninitialized value. Handle that case by returning PORT_CLK_SEL_NONE and warning about it. v2: Move the warning inside intel_ddi_get_crtc_pll (Paulo Zanoni) Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Ben Widawsky authored
HSW doesn't overclock the same way as IVB or SNB. I do not know about VLV, so I've kept that off as well. I'm still working on getting the doc updates to explain how we overclock on Haswell. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
- 23 Mar, 2013 16 commits
-
-
Paulo Zanoni authored
So don't read it when capturing the error state. This solves "unclaimed register" messages on Haswell when we have a GPU hang. V2: Check for HAS_PCH_SPLIT instead of Gen5+ because VLV still has this register. Signed-off-by:
-
Paulo Zanoni authored
So don't read it when capturing the error state. This solves some "unclaimed register" messages on Haswell when we hang the GPU. Signed-off-by:
-
Paulo Zanoni authored
The first version of commit "drm/i915: there's no DSPADDR register on Haswell" added 2 "!IS_HASWELL" checks. When reviewing the patch, Ben suggested to make these checks more future-proof, so when Daniel applied the patch he fixed the first check but not the second. This commit makes the second check also "future-proof". Signed-off-by:
-
Damien Lespiau authored
The port number should always be correctly set. Do the same thing as the switch above and use BUG() to signal that branch is not supposed to be taken. Signed-off-by:
-
Damien Lespiau authored
We are really talking about the transcoder function here and the disable version uses trancoder in its name already, so let's try to be consistent. Signed-off-by:
-
Damien Lespiau authored
In the case where the hardware has been wrongly programmed and the EDP TRANS_DDI_FUNC_CTL register has a bogus value in its EDP Input field, we were using the pipe variable uninitialized. In this case, shutdown the transcoder. It will be programmed correctly the next time we try to enabled eDP. Note from Paulo's review: Wrong modeset sequence can easily lead to frozen machines hence the disable_ddi call might be risky. But since things are awry already, doesn't matter too much. Signed-off-by:
-
Damien Lespiau authored
Our static analysis tool noticed that 'reg' could be used uninitialized if we are trying to get a PLL to drive VGA and SPLL is already in use (plls->spll_refcoung != 0). In the (error) case above, let's return false to the caller and emit an error. Signed-off-by:
-
Ben Widawsky authored
Bspec mentions this for HSW+. I can't quite tell what the effects are, and I don't easily have a way to test this. Signed-off-by:
-
Ville Syrjälä authored
We do this for HDMI already, so I don't know why we wouldn't do it for SDVO as well. This is completely untested due to lack of hardware. Signed-off-by:
-
Ville Syrjälä authored
This comment looks like some historical leftover. Get rid of it. Signed-off-by:
-
Ben Widawsky authored
Change the gen6+ max delay if the pcode read was successful (not the inverse). The previous code was all sorts of wrong and has existed since I broke it: commit 42c0526c Author: Ben Widawsky <ben@bwidawsk.net> Date: Wed Sep 26 10:34:00 2012 -0700 drm/i915: Extract PCU communication I added some parentheses for clarity, and I also corrected the debug message message to use the mask (wrong before I came along) and added a print to show the value we're changing from. Looking over the code, I'm not actually sure what we're trying to do. I introduced the bug simply by extracting the function not implementing anything new. We already set max_delay based on the capabilities register (which is what we use elsewhere to determine min and max). This would potentially increase it, I suppose? Jesse, I can't find the document which explains the definitions of the pcode commands, maybe you have it around. Based on Jesse's response, this could potentially be for -fixes, or stable, or maybe lead to us dropping it entirely. As the current code is is, things won't completely break because of the aforementioned capabilities register, and in my experimentation, enabling this has no effect, it goes from 1100->1100. I found this while reviewing Jesse's VLV patches. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ben Widawsky authored
Recommended by Chris. v2: Make it GEN7_FEATURES, and use it for vlv and hsw also (Ben) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ben Widawsky authored
Requested by Daniel. v2: Fix incorrect num_pipe settings. (Chris) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
The index variable points at a page table, not a page directory or a pde. Ben Widawsky fix this up correctly in his ppgtt cleanup, but I've botched the job and copy&pasted the old confusion from the original gen6 ppgtt code in commit def886c3 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 24 14:44:56 2013 -0800 drm/i915: vfuncs for ppgtt Reviewed-by:
-
Daniel Vetter authored
-
Jesse Barnes authored
Port C is for eDP. Port B is shared between HDMI and DP. Signed-off-by:
-
