- 07 Nov, 2014 14 commits
-
-
Damien Lespiau authored
The function was removed in: commit 0e32b39c Author: Dave Airlie <airlied@redhat.com> Date: Fri May 2 14:02:48 2014 +1000 drm/i915: add DP 1.2 MST support (v0.7) Signed-off-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Daniel Vetter authored
On pre-ddi platforms we don't shut down the link when changing link training parameters. Except when clock recovery fails too hard and we restart with channel eq training. Which doesn't make a lot of sense really, since just stopping/restarting the DP port at this point violates the modeset sequence documented in the Bspec. So let's tempt fate and try this. This patch is motivated by a WARN_ON triggered by commit bc76e320 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue May 20 22:46:50 2014 +0200 drm/i915: Drop now misleading DDI comment from dp_link_down References: https://bugs.freedesktop.org/show_bug.cgi?id=85670Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Damien Lespiau authored
Chris removed the code using it in: commit be2d599b Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Sep 10 19:52:18 2014 +0100 drm/i915: Remove dead code, i915_gem_verify_gtt Signed-off-by:
-
Damien Lespiau authored
As Paulo said when introducing the enum, having more types is really good to document what should go where (int foo(int, int, bool, bool). Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Daniel Vetter authored
It's really part of the "push all new_* state into current state pointers" done in that function. So let's move it there to make this clear. Also, with the conversion done the num_shared_dpll check the function does in it's loop is enough, so we can drop the check for the dpll compute callback, too. Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: -
Ander Conselvan de Oliveira authored
Now that shared DPLLs configuration is staged, there's no need to track the current ones in the new pipe_config since those are released before making the new pipe_config effective. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
There's no users left after the conversion to calculate clocks before disabling crtcs during mode set. Signed-off-by:
-
Ander Conselvan de Oliveira authored
Use the infrastructure added in a previous patch to choose shared DPLLs and calculate clocks before touching the hardware. v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville) Signed-off-by:
-
Ander Conselvan de Oliveira authored
Use the infrastructure added in a previous patch to choose shared DPLLs and calculate clocks before touching the hardware. v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville) Signed-off-by:
-
Ander Conselvan de Oliveira authored
Use the infrastructure added in a previous patch to choose shared DPLLs and calculate clocks before touching the hardware. v2: Don't set mode_set hooks since dev_priv is kzalloc()'d (Ville) Signed-off-by:
-
Ander Conselvan de Oliveira authored
It is possible for a mode set to fail if there aren't shared DPLLS that match the new configuration requirement or other errors in clock computation. If that step is executed after disabling crtcs, in the failure case the hardware configuration is changed and needs to be restored. Doing those things early will allow the mode set to fail before actually touching the hardware. Follow up patches will convert different platforms to use the new infrastructure. v2: Keep pll->new_config valid only during mode set (Ville) Use kmemdup() in i915_shared_dpll_start_config() (Ville) Restore old pll config if something fails before commit (Ville) Don't set compute_clock hooks since dev_priv is kzalloc()'d (Ville) Signed-off-by: -
Ander Conselvan de Oliveira authored
The new struct will be used in a follow up patch to allow a current and a staged config to exist for the same shared DPLL. v2: Rebase on by mask_to_refcount()->hweight32() change. (Damien) Signed-off-by:
-
Ander Conselvan de Oliveira authored
This will be used in a follow up patch to properly release shared DPLLs without relying on the shared_dpll field in pipe_config. v2: Fix white space error (Ville) Use hweight32() (Ville) Signed-off-by: -
Daniel Vetter authored
More concise. Noticed while reviewing Ander's patch which touched a lot of the pipe_has_type checks. v2: Use new_config in one place Ander spotted. Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by:
-
- 04 Nov, 2014 26 commits
-
-
Ander Conselvan de Oliveira authored
This shouldn't change the behavior of those functions, since they are called after the new_config is made effective and that points to the current config. In a follow up patch, the mode set sequence will be changed so this is called before disabling crtcs, and in that case those functions should work on the staged config. Signed-off-by:
-
Dave Gordon authored
execlists_submit_context() always returns 0, which is redundant. And its name is inaccurate, since it actually submits (up to) TWO contextS. So we rename it, change it to "void", and remove the WARN_ON() testing its return value. Change-Id: Ie225b0eca7754c6093c8b8bd15550b251b6feb82 Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
-
John Harrison authored
If a ring failed to initialise for any reason then the error path would try to clean up all rings including those that had not yet been allocated. The ring clean up code did a check that the ring was valid before starting its work. Unfortunately, that was after it had already dereferenced the ring to obtain a dev_private pointer. Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
-
Mika Kuoppala authored
When looking at the bug report logs with triggered WARN_ON, the person doing bug triaging will have to find exact kernel source and match file/line. Attach the condition that triggered the WARN_ON to kernel log. In most cases the context is self evident and this way we can save developer time. The drawback is ~16kbytes bigger i915.ko Signed-off-by:
Mika Kuoppala <miku@iki.fi> Signed-off-by:
-
Ville Syrjälä authored
When we suspend we turn everything off so the pps should be idle, and we also (or at least should) disable all power wells which will reset the power sequencer port assignment. So when we resume all power sequencers should be in their reset state. However it's at least theoretically possible that the BIOS would touch the power seuqencer(s), so to be safe we ought to read out the current port assignment like we do at driver init time. To do that we can simply call vlv_initial_power_sequencer_setup() from the encoder ->reset() hook before calling intel_edp_panel_vdd_sanitize(). There's no danger or clobbering the pps delays since we now have those stored within intel_dp and we don't change them once initialized. This will make sure that the vdd state gets correctly tracked post-resume in case the BIOS enabled it. We need to shuffle things around a bit to get the locking right, and while at it, make intel_edp_panel_vdd_sanitize() static and move it around a bit to avoid a forward declaration. Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
The pps timestamp initialization was accidentally lost on vlv/chv in commit a4a5d2f8 Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Thu Sep 4 14:54:20 2014 +0300 drm/i915: Track which port is using which pipe's power sequencer Restore it so that we avoid introducing random delays into the pps operations during/after driver init time. Cc: Imre Deak <imre.deak@intel.com> Reported-by:
-
Jani Nikula authored
We'll never end up in the hooks with eld[0] unset, as that's checked by drm_select_eld(). Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Jani Nikula authored
Introduce functions to enable/disable the audio codec, incorporating the ELD setup within enable. The disable is initially limited to HSW, covering exactly what was done previously. The only functional difference is that ELD valid is no longer set if there is no connector with ELD, which should be the right thing to do anyway. Otherwise the sequence remains the same, with warts and all, in preparation for applying more sanity. v2: add kernel doc. Signed-off-by:
-
Jani Nikula authored
The audio programming sequence states that the ELD must be written and enabled after the pipe is ready. Indeed, this should clarify the situation with commit c7905792 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Apr 16 16:56:09 2014 +0200 drm/i915: Remove vblank wait from haswell_write_eld and Ville's review of it [1]. Moreover, we should not touch the relevant registers before we get the audio power domain. [1] http://mid.gmane.org/20140416155309.GK18465@intel.comSigned-off-by:
-
Jani Nikula authored
Keep the driver modifications to ELD together. This also sets the Conn_Type for G4X DP which wasn't done before. Clean up the debugs while at it; this is all obvious from the connector name. v3: add missing ~ (Rodrigo) Signed-off-by:
-
Ville Syrjälä authored
It seems that the pipe-a power well has replaced the disp2d power well on chv. At least that's the case with the current punit firmware. So enable the pipe-a power and expand its domains to cover everything the disp2d well ought to cover. The other power wells (apart from the cmnlane wells) still seem awol in the current punit firmware. So leave them disabled in the code. This fixes a hilarious oops during resume on bsw where intel_hdmi_get_config() would read the port register and get back 0xffffffff and thus think the port is enabled on pipe D. It would then go and index the pipe_to_crtc_mapping[] array with PIPE_D and blow up when intel_hdmi_get_config() tries to write to crtc->config. Someone really ought to replace all naked pipe_to_crtc_mapping[] uses with the appropriate function call so we could add a warning there if the pipe doesn't actually exist... We must also call the power seqeuencer state reset function from the pipe-a well disable just like we do from disp2d on vlv. Otherwise the eDP panel won't recover at resume time since the PPS has lost its hold on the port. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=84903Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ville Syrjälä authored
CHV has a programmable CSC unit on the pipe B sprites. Program the unit appropriately for BT.601 limited range YCbCr to full range RGB color conversion. This matches the programming we currently do for sprites on the other pipes and on other platforms. It seems the CSC only works when the input data is YCbCr. For RGB pixel formats it doesn't matter what we program into the CSC registers. Doesn't make much sense to me especially since the register names give the impression that RGB input data would also work. But that's how it behaves here. In the review discussions there's been some nice math to explain the values obtained here. First about the YCbCr->RGB matrix: "I had the RGB->YCbCr matrix, inverted it and the values came out. But they should match the wikipedia article. Also keep in mind that the coefficients are in .12 in fixed point format, hence we need a 1<<12 factor. So let's try it: Kb=.114 Kr=.299 (1<<12) * 255/219 ~= 4769 -(1<<12) * 255/112*(1-Kb)*Kb/(1-Kb-Kr) ~= -1605 -(1<<12) * 255/112*(1-Kr)*Kr/(1-Kb-Kr) ~= -3330 (1<<12) * 255/112*(1-Kr) ~= 6537 (1<<12) * 255/112*(1-Kb) ~= 8263 "Looks like the same values to me." And then about the limits used for clamping: "> where did you get these min/max? "The hardware apparently deals in 10bit values, so we need to multiply everything by 4 when we start with the 8bit min/max values. Y = [16:235] * 4 = [64:940] CbCr = ([16:240] - 128) * 4 = [-112:112] * 4 = [-448:448] "The -128 being the -0.5 bias that the hardware already applied before the data entered the CSC unit." Raw data is also supplied in 10bpc in the registers. Signed-off-by:
-
Paulo Zanoni authored
We want to run intel_uncore_early_sanitize() before we touch any registers, because on BDW, when we resume, the FPGA_DBG_RM_NOCLAIM bit is set, so we need to clear it - through intel_uncore_early_sanitize() - before we do anything else. With the current code, we don't clear the bit before our first register access, so we print a WARN complaining about an unclaimed register error. v1: Was called "drm/i915: run intel_uncore_early_sanitize earlier on resume" v2: Was called "drm/i915: run intel_uncore_early_sanitize earlier on resume on non-VLV" v3: This one, on top of the intel_resume_prepare() rework. v4: Rebase. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Paulo Zanoni authored
Because, really, the abstraction is not working for us. It is nice for VLV, but doesn't add anything useful on SNB/HSW/BDW. We want to change this code due to a recently-discovered bug, but we can't seem to find a nice solution that repects the current abstraction. So let's kill intel_resume_prepare() and its friends, and add an equivalent implementation to both its callers. Also, look at the diffstat! v2: - Rebase. Signed-off-by:
-
Ville Syrjälä authored
CHV adds a bunch of new registers for primary plane size/position and pipe blender setup. Initialize all those registers to avoid nasty surprises. PRIMSIZE is especially important as without programming it the outout will be garbled whenever the primary plane size would not match what the BIOS set up. Also program the sprite constant alpha register to disable the constant alpha blending factor. This applies to vlv as well as chv. Signed-off-by:
-
Ville Syrjälä authored
In case the cmnlane power well is down but cmnreset isn't asserted we would currently skip the off+on toggle for the power well. That could leave cmnreset deasserted while cmnlane is powered down which might lead to problems with the PHY. To avoid such issues skip the cmnlane toggle only if both cmnlane and disp2d wells are up and cmnreset is already deasserted. In all other cases power down the cmnlane well which will also make sure cmnreset gets asserted correctly while cmnlane is powered down. Signed-off-by:
-
Gustavo Padovan authored
Use the macros makes the code cleaner and it also checks for a NULL fb. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
-
Gustavo Padovan authored
take out pin_fb code so the commit phase can't fail anymore. Signed-off-by:
-
Gustavo Padovan authored
Take out the pin_fb code so commit phase can't fail anymore. Signed-off-by:
-
Ville Syrjälä authored
The power seqeuencer kick procedure requires the DPLL to be running in order to complete successfully. In case the DPLL isn't currently running when we need to kick the power seqeuncer enable it temporarily. This can happen eg. during ->detect() when the pipe is not already active. To avoid needlessly duplicating the DPLL programming re-use the already existing functions by passing a temporary pipe config to them instead of having them consult the current pipe config at crtc->config. v2: Introduce vlv_force_pll_{on,off}() (Daniel) v3: Rebase due to drm_crtc vs. intel_crtc changes Fix a typo in commit msg (checkpatch) Signed-off-by: -
Ville Syrjälä authored
eDP ports need the power seqeuncer whenever the port is active. Warn if we accidentally steal the power sequener from an active eDP port. This should not happen unless there's a bug somewhere else, but it's best to scream loudly if it happens to help with debugging. Note that this only checks for active pipes and not for enabled pipes which are turned off with dpms. Which means we might run the risk that the pps might get stolen and we can't reacquire one when enabling the pipe again with dpms on. But on current platforms that's impossible since we only support two edp ports with just two panel power sequencers. So a more elaborate scheme which reserves the pps even when the pipe is inactive isn't required. Signed-off-by:
-
Ville Syrjälä authored
We should never enable the panel power twice. That would indicate a bug somewhere else as we would need to enable the port twice without disabling it in between. Also print the port name. Signed-off-by:
-
Ville Syrjälä authored
Print the port name in the VDD/PPS debugs messages. Signed-off-by:
-
Ville Syrjälä authored
In case we fumble something and end up picking an already used power seqeuencer in vlv_power_sequencer_pipe() at least try to steal it gracefully. In theory this should never happen though. Signed-off-by:
-
Ville Syrjälä authored
There's no power sequencer on pipe C on VLV/CHV so scream a bit if we try to steal one from pipes other than A and B. Signed-off-by:
-
Ville Syrjälä authored
VLV gets confused if two power sequencers have the same port selected. It would seem the port doesn't start up properly in the is case and vlv_wait_port_ready() will fail as will the link training. Clearing the port select in the PP_ON_DELAYS register fixes this problem. CHV doesn't seem to need this, but it doesn't seem to hurt either so let's just do it for both to keep the code between the platforms as uniform as possible. Signed-off-by:
-
