- 12 Feb, 2019 40 commits
-
-
Arnd Bergmann authored
[ Upstream commit 79e89e36 ] Without CONFIG_HDMI, we get a link error for this driver: drivers/media/i2c/tda1997x.o: In function `tda1997x_parse_infoframe': tda1997x.c:(.text+0x2195): undefined reference to `hdmi_infoframe_unpack' tda1997x.c:(.text+0x21b6): undefined reference to `hdmi_infoframe_log' drivers/media/i2c/tda1997x.o: In function `tda1997x_log_infoframe': tda1997x.c:(.text.unlikely+0x13d3): undefined reference to `hdmi_infoframe_unpack' tda1997x.c:(.text.unlikely+0x1426): undefined reference to `hdmi_infoframe_log' All other drivers in this directory that use HDMI select CONFIG_HDMI, so do the same here: Fixes: 9ac0038d ("media: i2c: Add TDA1997x HDMI receiver driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sebastian Andrzej Siewior authored
[ Upstream commit 6637401c ] Every user of user_insn() passes an user memory pointer to this macro. Add might_fault() to user_insn() so we can spot users which are using this macro in sections where page faulting is not allowed. [ bp: Space it out to make it more visible. ] Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181128222035.2996-6-bigeasy@linutronix.deSigned-off-by:
-
Rob Herring authored
[ Upstream commit 8ef86955 ] The base aspeed-g5.dtsi already defines a '/memory@80000000' node, so '/memory' in the board files create a duplicate node. We're probably getting lucky that the bootloader fixes up the memory node that the kernel ends up using. Add the unit-address so it's merged with the base node. Found with DT json-schema checks. Cc: Joel Stanley <joel@jms.id.au> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-aspeed@lists.ozlabs.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 1147e05a ] Marvell keeps their MMP2 datasheet secret, but there are good clues that TWSI2 is not on 0xd4025000 on that platform, not does it use IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor: arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP 58 I'm taking a somewhat educated guess that is probably a copy & paste error from PXA168 or PXA910 and that the real controller in fact hides at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17. I'm also copying some properties from TWSI1 that were missing or incorrect. Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Eric Anholt authored
[ Upstream commit 62d1a752 ] v3d_bo_get_pages() checks this to decide to map the imported buffer instead of the backing shmem file. The caller was about to set this value anyway, and there's no error path in between. Ideally we wouldn't even allocate the shmem file for our imports, but that's a more invasive fix. Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+") Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-3-eric@anholt.netAcked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Dave Emett <david.emett@broadcom.com> Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 6e803e2e ] The core ftrace code requires that when it is handed the PC of an instrumented function, this PC is the address of the instrumented instruction. This is necessary so that the core ftrace code can identify the specific instrumentation site. Since the instrumented function will be a BL, the address of the instrumented function is LR - 4 at entry to the ftrace code. This fixup is applied in the mcount_get_pc and mcount_get_pc0 helpers, which acquire the PC of the instrumented function. The mcount_get_lr helper is used to acquire the LR of the instrumented function, whose value does not require this adjustment, and cannot be adjusted to anything meaningful. No adjustment of this value is made on other architectures, including arm. However, arm64 adjusts this value by 4. This patch brings arm64 in line with other architectures and removes the adjustment of the LR value. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Torsten Duwe <duwe@suse.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 6bf4a8e9 ] Fix IBI_R11 configuration on non-radar channels for mt76x0e driver. This patch improve system stability under heavy load. Moreover use IBI_R11 name and remove magic numbers for 0x212c register Fixes: 0c3b3abc9251 ("mt76x0: pci: add DFS support") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Harald Freudenberger authored
[ Upstream commit be534791 ] There exist very few ap messages which need to have the 'special' flag enabled. This flag tells the firmware layer to do some pre- and maybe postprocessing. However, it may happen that this special flag is enabled but the firmware is unable to deal with this kind of message and thus returns with reply code 0x41. For example older firmware may not know the newest messages triggered by the zcrypt device driver and thus react with reject and the named reply code. Unfortunately this reply code is not known to the zcrypt error routines and thus default behavior is to switch the ap queue offline. This patch now makes the ap error routine aware of the reply code and so userspace is informed about the bad processing result but the queue is not switched to offline state any more. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Arend van Spriel authored
[ Upstream commit ab2180a1 ] Since commit: ce2e6db5 ("brcmfmac: Add support for getting nvram contents from EFI variables") we have a device driver accessing the efivars API. Several functions in the efivars API assume __efivars is set, i.e., that they will be accessed only after efivars_register() has been called. However, the following NULL pointer access was reported calling efivar_entry_size() from the brcmfmac device driver: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = 60bfa5f1 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM ... Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events request_firmware_work_func PC is at efivar_entry_size+0x28/0x90 LR is at brcmf_fw_complete_request+0x3f8/0x8d4 [brcmfmac] pc : [<c0c40718>] lr : [<bf2a3ef4>] psr: a00d0113 sp : ede7fe28 ip : ee983410 fp : c1787f30 r10: 00000000 r9 : 00000000 r8 : bf2b2258 r7 : ee983000 r6 : c1604c48 r5 : ede7fe88 r4 : edf337c0 r3 : 00000000 r2 : 00000000 r1 : ede7fe88 r0 : c17712c8 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: ad16804a DAC: 00000051 Disassembly showed that the local static variable __efivars is NULL, which is not entirely unexpected given that it is a non-EFI platform. So add a NULL pointer check to efivar_entry_size(), and to related functions while at it. In efivars_register() a couple of sanity checks are added as well. Reported-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: YiFei Zhu <zhuyifei1999@gmail.com> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-9-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Thara Gopinath authored
[ Upstream commit 68000a0d ] Sysfs interface to update cooling device cur_state does not currently holding cooling device lock sometimes leading to stale values in cur_state if getting updated simultanelously from user space and thermal framework. Adding the proper locking code fixes this issue. Signed-off-by:
Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Wei Wang authored
[ Upstream commit 964f4843 ] commit ff140fea ("Thermal: handle thermal zone device properly during system sleep") added PM hook to call thermal zone reset during sleep. However resetting thermal zone will also clear the passive state and thus cancel the polling queue which leads the passive cooling device state not being cleared properly after sleep. thermal_pm_notify => thermal_zone_device_reset set passive to 0 thermal_zone_trip_update will skip update passive as `old_target == instance->target'. monitor_thermal_zone => thermal_zone_device_set_polling will cancel tz->poll_queue, so the cooling device state will not be changed afterwards. Reported-by:
Kame Wang <kamewang@google.com> Signed-off-by:
Wei Wang <wvw@google.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 1b57ec8c ] As of commit 6460d320 ("arm64: io: Ensure calls to delay routines are ordered against prior readX()"), MMIO reads smaller than 64 bits fail to compile under clang because we end up mixing 32-bit and 64-bit register operands for the same data processing instruction: ./include/asm-generic/io.h:695:9: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths] return readb(addr); ^ ./arch/arm64/include/asm/io.h:147:58: note: expanded from macro 'readb' ^ ./include/asm-generic/io.h:695:9: note: use constraint modifier "w" ./arch/arm64/include/asm/io.h:147:50: note: expanded from macro 'readb' ^ ./arch/arm64/include/asm/io.h:118:24: note: expanded from macro '__iormb' asm volatile("eor %0, %1, %1\n" \ ^ Fix the build by casting the macro argument to 'unsigned long' when used as an input to the inline asm. Reported-by:
Nick Desaulniers <nick.desaulniers@gmail.com> Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit 754a58db ] devm_kasprintf() may return NULL on failure of internal allocation thus the assignment to 'name' is not safe if unchecked. If NULL is passed in for name then perf_pmu_register() would not fail but rather silently jump to skip_type which is not the intent here. As perf_pmu_register() may also return -ENOMEM returning -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here as well. Acked-by:
Nicholas Mc Guire <hofrat@osadl.org> [will: reworded error message] Signed-off-by:
-
Sean Paul authored
[ Upstream commit aa394b0d ] drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to the context given in the argument and leaves it in state after it quits. The lifetime of state and context are not guaranteed to be the same, so we shouldn't leave that pointer hanging around. This patch resets the context to NULL to avoid any oopses. Changes in v2: - Added to the set Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-1-sean@poorly.runSigned-off-by:
-
J. Bruce Fields authored
[ Upstream commit 62a063b8 ] Anatoly Trosinenko reports that this: 1) Checkout fresh master Linux branch (tested with commit e195ca6c) 2) Copy x84_64-config-4.14 to .config, then enable NFS server v4 and build 3) From `kvm-xfstests shell`: results in NULL dereference in locks_end_grace. Check that nfsd has been started before trying to end the grace period. Reported-by:
Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 1861a7f0 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. soc_is_brcmstb() doesn't do that, so fix it. [treding: slightly rewrite to avoid inline comparison] Fixes: d52fad26 ("soc: add stubs for brcmstb SoC's") Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Young Xiao authored
[ Upstream commit a11f6ca9 ] __vdc_tx_trigger should only loop on EAGAIN a finite number of times. See commit adddc32d ("sunvnet: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN") for detail. Signed-off-by:
Young Xiao <YangX92@hotmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 4e3c7c00 ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c:260:7: warning: variable 'err' set but not used [-Wunused-but-set-variable] 'err' should be returned while set MPI_DEINIT state fails in hw_atl_utils_soft_reset. Fixes: cce96d18 ("net: aquantia: Regression on reset with 1.x firmware") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 6460d320 ] A relatively standard idiom for ensuring that a pair of MMIO writes to a device arrive at that device with a specified minimum delay between them is as follows: writel_relaxed(42, dev_base + CTL1); readl(dev_base + CTL1); udelay(10); writel_relaxed(42, dev_base + CTL2); the intention being that the read-back from the device will push the prior write to CTL1, and the udelay will hold up the write to CTL1 until at least 10us have elapsed. Unfortunately, on arm64 where the underlying delay loop is implemented as a read of the architected counter, the CPU does not guarantee ordering from the readl() to the delay loop and therefore the delay loop could in theory be speculated and not provide the desired interval between the two writes. Fix this in a similar manner to PowerPC by introducing a dummy control dependency on the output of readX() which, combined with the ISB in the read of the architected counter, guarantees that a subsequent delay loop can not be executed until the readX() has returned its result. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Simon Horman authored
[ Upstream commit 5eb316e6 ] Add support for the IIC code for the r8a77990 (R-Car E3). It is not considered compatible with existing fallback bindings due to the documented absence of automatic transmission registers. These registers are currently not used by the driver and thus the provides the same behaviour for "renesas,iic-r8a77990" and "renesas,rcar-gen3-iic". The point of declaring incompatibility is to allow for automatic transmission register support to be added to "renesas,iic-r8a77990" and "renesas,rcar-gen3-iic" in future. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Tiezhu Yang authored
[ Upstream commit f6176473 ] When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create() should return -EIO instead of -ENOMEM, this patch makes it consistent with posix_acl_create() which has been fixed in commit beaf226b ("posix_acl: don't ignore return value of posix_acl_create_masq()"). Fixes: 83dfe53c ("f2fs: fix reference leaks in f2fs_acl_create") Signed-off-by:
Tiezhu Yang <kernelpatch@126.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Sheng Yong authored
[ Upstream commit 2866fb16 ] The following race could lead to inconsistent SIT bitmap: Task A Task B ====== ====== f2fs_write_checkpoint block_operations f2fs_lock_all down_write(node_change) down_write(node_write) ... sync ... up_write(node_change) f2fs_file_write_iter set_inode_flag(FI_NO_PREALLOC) ...... f2fs_write_begin(index=0, has inline data) prepare_write_begin __do_map_lock(AIO) => down_read(node_change) f2fs_convert_inline_page => update SIT __do_map_lock(AIO) => up_read(node_change) f2fs_flush_sit_entries <= inconsistent SIT finish write checkpoint sudden-power-off If SPO occurs after checkpoint is finished, SIT bitmap will be set incorrectly. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Reviewed-by:
-
Yunlei He authored
[ Upstream commit b61ac5b7 ] This patch move dir data flush to write checkpoint process, by doing this, it may reduce some time for dir fsync. pre: -f2fs_do_sync_file enter -file_write_and_wait_range <- flush & wait -write_checkpoint -do_checkpoint <- wait all -f2fs_do_sync_file exit now: -f2fs_do_sync_file enter -write_checkpoint -block_operations <- flush dir & no wait -do_checkpoint <- wait all -f2fs_do_sync_file exit Signed-off-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
-
Michael Straube authored
[ Upstream commit 64c4c4ca ] Add a test for successful call to cdev_alloc() to avoid potential null dereference. Issue reported by smatch. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Fixes: 874bcba6 ("staging: pi433: New driver") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit b413b1ab ] Since SPCR 1.04 [1] the baud rate of 0 means a preconfigured state of UART. Assume firmware or bootloader configures console correctly. [1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-port-console-redirection-tableSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 2912289a ] The v4l2_dv_timings_cap struct is used to do sanity checks when setting and enumerating DV timings, ensuring that only valid timings as per the HW capabilities are allowed. However, many drivers just filled in 0 for the minimum width, height or pixelclock frequency. This can cause timings with e.g. 0 as width and height to be accepted, which will in turn lead to a potential division by zero. Fill in proper values are minimum boundaries. 640x350 was chosen since it is the smallest resolution in v4l2-dv-timings.h. Same for 13 MHz as the lowest pixelclock frequency (it's slightly below the minimum of 13.5 MHz in the v4l2-dv-timings.h header). Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 7f6232e6 ] Various 2-in-1's use KIOX010A and KIOX020A as HIDs for 2 KXCJ91008 accelerometers. The KIOX010A HID is for the one in the base and the KIOX020A for the accelerometer in the keyboard. Since userspace does not have a way yet to deal with (or ignore) the accelerometer in the keyboard, this commit just adds the KIOX010A HID for now so that display rotation will work. Related: https://github.com/hadess/iio-sensor-proxy/issues/166Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 50314f98 ] Before this patch we are registering the internal clocks (for example on Meson8b, where the SAR ADC IP block implements the divider and gate clocks) with the following names: - /soc/cbus@c1100000/adc@8680#adc_div - /soc/cbus@c1100000/adc@8680#adc_en This is bad because the common clock framework uses the clock to create a directory in <debugfs>/clk. With such name, the directory creation (silently) fails and the debugfs entry ends up being created at the debugfs root. With this change, the new clock names are: - c1108680.adc#adc_div - c1108680.adc#adc_en This matches the clock naming scheme used in the PWM, Ethernet and MMC drivers. It also fixes the problem with debugfs. The idea is shamelessly taken from commit b96e9eb6 ("pwm: meson: Fix mux clock names"). Fixes: 3921db46 ("iio: Convert to using %pOF instead of full_name") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit aad172b0 ] devm_kasprintf() may return NULL on failure of internal allocation thus the assignments to init.name are not safe if not checked. On error meson_sar_adc_clk_init() returns negative values so -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here. Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit beba24ac ] When both `CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y` and `CONFIG_UBSAN=y` are set, link step typically produce numberous warnings about orphan section: + powerpc-linux-gnu-ld -EB -m elf32ppc -Bstatic --orphan-handling=warn --build-id --gc-sections -X -o .tmp_vmlinux1 -T ./arch/powerpc/kernel/vmlinux.lds --who le-archive built-in.a --no-whole-archive --start-group lib/lib.a --end-group powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_data393' from `init/main.o' being placed in section `.data..Lubsan_data393'. powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_data394' from `init/main.o' being placed in section `.data..Lubsan_data394'. ... powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_type11' from `init/main.o' being placed in section `.data..Lubsan_type11'. powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_type12' from `init/main.o' being placed in section `.data..Lubsan_type12'. ... This commit remove those warnings produced at W=1. Link: https://www.mail-archive.com/linuxppc-dev@lists.ozlabs.org/msg135407.htmlSuggested-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit aeaebcc1 ] Clang warns: drivers/dma/xilinx/zynqmp_dma.c:166:4: warning: attribute 'aligned' is ignored, place it after "struct" to apply attribute to type declaration [-Wignored-attributes] }; __aligned(64) ^ ./include/linux/compiler_types.h:200:38: note: expanded from macro '__aligned' ^ 1 warning generated. As Nick pointed out in the previous version of this patch, the author likely intended for this struct to be 8-byte (64-bit) aligned, not 64-byte, which is the default. Remove the hanging __aligned attribute. Fixes: b0cc417c ("dmaengine: Add Xilinx zynqmp dma engine driver support") Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit aea0a897 ] Fix smatch warning: drivers/ptp/ptp_clock.c:298 ptp_clock_register() warn: passing zero to 'ERR_PTR' 'err' should be set while device_create_with_groups and pps_register_source fails Fixes: 85a66e55 ("ptp: create "pins" together with the rest of attributes") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 0dad1ec6 ] We don't want the common clock framework to disable the "cpu_clk" if it's not used by any device. The cpufreq-dt driver does not enable the CPU clocks. However, even if it would we would still want the CPU clock to be enabled at all times because the CPU clock is also required even if we disable CPU frequency scaling on a specific board. The reason why we want the CPU clock to be enabled is a clock further up in the tree: Since commit 6f888e7bc7bd58 ("clk: meson: clk-pll: add enable bit") the sys_pll can be disabled. However, since the CPU clock is derived from sys_pll we don't want sys_pll to get disabled. The common clock framework takes care of that for us by enabling all parent clocks of our CPU clock when we mark the CPU clock with CLK_IS_CRITICAL. Until now this is not a problem yet because all clocks in the CPU clock's tree (including sys_pll) are read-only. However, once we allow modifications to the clocks in that tree we will need this. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181115224048.13511-4-martin.blumenstingl@googlemail.comSigned-off-by:
-
Martin Blumenstingl authored
[ Upstream commit a8662ead ] According to the public S805 datasheet HHI_SYS_CPU_CLK_CNTL1[29:20] is the register for the CPU scale_div clock. This matches the code in Amlogic's 3.10 GPL kernel sources: N = (aml_read_reg32(P_HHI_SYS_CPU_CLK_CNTL1) >> 20) & 0x3FF; This means that the divider register is 10 bit wide instead of 9 bits. So far this is not a problem since all u-boot versions I have seen are not using the cpu_scale_div clock at all (instead they are configuring the CPU clock to run off cpu_in_sel directly). The fixes tag points to the latest rework of the CPU clocks. However, even before the rework it was wrong. Commit 7a29a869 ("clk: meson: Add support for Meson clock controller") defines MESON_N_WIDTH as 9 (in drivers/clk/meson/clk-cpu.c). But since the old clk-cpu implementation this only carries the fixes tag for the CPU clock rewordk. Fixes: 251b6fd3 ("clk: meson: rework meson8b cpu clock") Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit a5ac1ead ] The cpu_div3 clock (cpu_in divided by 3) generates a signal with a duty cycle of 33%. The CPU clock however requires a clock signal with a duty cycle of 50% to run stable. cpu_div3 was observed to be problematic when cycling through all available CPU frequencies (with additional patches on top of this one) while running "stress --cpu 4" in the background. This caused sporadic hangs where the whole system would fully lock up. Amlogic's 3.10 kernel code also does not use the cpu_div3 clock either when changing the CPU clock. Signed-off-by:
-
Gao Xiang authored
[ Upstream commit eef16878 ] It's better not to positively BUG_ON the kernel, however developers need a way to locate issues as soon as possible. DBG_BUGON is introduced and it could only crash when EROFS_FS_DEBUG (EROFS developping feature) is on. It is helpful for developers to find and solve bugs quickly by eng builds. Previously, DBG_BUGON is defined as ((void)0) if EROFS_FS_DEBUG is off, but some unused variable warnings as follows could occur: drivers/staging/erofs/unzip_vle.c: In function `init_alway:': drivers/staging/erofs/unzip_vle.c:61:33: warning: unused variable `work' [-Wunused-variable] struct z_erofs_vle_work *const work = ^~~~ Fix it to #define DBG_BUGON(x) ((void)(x)). Reviewed-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 8ea0f2ba ] of_parse_phandle() returns the device node with refcount incremented. There are two nodes that are used temporary in mtk_vcodec_init_enc_pm(), but their refcounts are not decremented. The patch adds one of_node_put() and fixes returning error codes. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Akinobu Mita authored
[ Upstream commit c764da98 ] The video device release() callback for video-i2c driver frees the whole struct video_i2c_data. If there is no user left for the video device when video_unregister_device() is called, the release callback is executed. However, in video_i2c_remove() some fields (v4l2_dev, lock, and queue_lock) in struct video_i2c_data are still accessed after video_unregister_device() is called. This fixes the use after free by moving the code from video_i2c_remove() to the release() callback. Fixes: 5cebaac6 ("media: video-i2c: add video-i2c driver") Reviewed-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sean Young authored
[ Upstream commit 8e782fcf ] If userspace has an open file descriptor on the rc input device or lirc device when rc_unregister_device() is called, then the rc close() is never called. This ensures that the receiver is turned off on the nuvoton-cir driver during shutdown. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 9eb40fa2 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. soc_is_tegra() doesn't do that, so fix it. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
