- 14 Feb, 2019 1 commit
-
-
Aditya Swarup authored
Organize combo PHY DDI macro definitions semantically based on dword, lane and port (in this order). Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Aditya Swarup <aditya.swarup@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128220012.13122-2-aditya.swarup@intel.com
-
- 13 Feb, 2019 8 commits
-
-
Ville Syrjälä authored
As there are no upstream drivers for VED or ISP let's just assert that they are power gated. Otherwise they would prevent s0ix entry. For ISP this is only relevant when it is not exposed as a PCI device and instead is a subordinate of the gunit. When exposed as a PCI device it will be handled by the atomisp2_pm driver. On my VLV FFRD8 board the firmware power gates both of these by default. Let's assume that is always the case and just WARN if we ever encounter something different. Cc: Hans de Goede <hdegoede@redhat.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181129175504.3630-2-ville.syrjala@linux.intel.comReviewed-by:
Imre Deak <imre.deak@intel.com>
-
Ville Syrjälä authored
Rename the punit display power register to match the spec. Signed-off-by:
-
Chris Wilson authored
As time goes by, usage of generic ioctls such as drm_syncobj and sync_file are on the increase bypassing i915-specific ioctls like GEM_WAIT. Currently, we only apply waitboosting to our driver ioctls as we track the file/client and account the waitboosting to them. However, since commit 7b92c1bd ("drm/i915: Avoid keeping waitboost active for signaling threads"), we no longer have been applying the client ratelimiting on waitboosts and so that information has only been used for debug tracking. Push the application of waitboosting down to the common i915_request_wait, and apply it to all foreign fence waits as well. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190213092504.25709-1-chris@chris-wilson.co.uk
-
Uma Shankar authored
Add the degamma and gamma lut sizes to gen11 capability structure. Note: Currently this doesn't account for the extended range gamma entries and this will be addressed with new segmented gamma ABI in a future patch. v2: Reorder the patch as per Maarten's suggestion. v3: Rebase v4: Updated commit message with a note as per Matt's suggestion. v5: No Change. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Uma Shankar authored
GEN11+ onwards an output csc hardware block has been added. This is after the pipe gamma block and is in addition to the legacy pipe CSC block. Primary use case for this block is to convert RGB to YUV in case sink supports YUV. This patch adds supports for the same. v2: This is added after splitting the existing ICL pipe CSC handling. As per Matt's suggestion, made this to co-exist with existing pipe CSC, wherein both can be enabled if a certain usecase arises. v3: Fixed an issue with co-existence of output csc and normal pipe csc, spotted by Matt. Put the csc mode flag enabling to color_check to align with atomic. v4: Fixed macro alignment and checkpatch complaints wrt line over 100 characters limit. Signed-off-by:
-
Uma Shankar authored
Enable ICL pipe csc hardware. CSC block is enabled in CSC_MODE register instead of PLANE_COLOR_CTL. ToDO: Extend the ABI to accept 32 bit coefficient values instead of 16bit for future platforms. v2: Addressed Maarten's review comments. v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt. v4: Addressed Matt's review comments. v5: Addressed Ville's review comments. v6: Separated pipe output csc programming from regular csc. v7: Rebase Signed-off-by:
-
Uma Shankar authored
Add support for icl pipe degamma and gamma. v2: Removed a POSTING_READ and corrected the Bit Definition as per Maarten's comments. v3: Addressed Matt's review comments. Removed rmw patterns as suggested by Matt. v4: Fixed Matt's review comments. v5: Corrected macro alignment as per Jani Nikula's comments. Addressed Ville and Matt's review comments. v6: Merged ICL degamma handling with GLK and dropped ICL degamma function as per Ville and Matt's comments. v7: updated gamma_mode state with pre csc gammma and post gamma enabling in intel_color_check to align with atomic. v8: Addressed Maarten's review comments. Signed-off-by:
-
Uma Shankar authored
Fixed the glk degamma lut programming which currently was hard coding a linear lut all the time, making degamma block of glk basically a pass through. Currently degamma lut for glk is assigned as 0 in platform configuration. Updated the same to 33 as per the hardware capability. IGT tests for degamma were getting skipped due to this, spotted by Swati. ToDo: The current gamma/degamm lut ABI has just 16bit for each color component. This is not enough for GLK+, since input precision is increased to 3.16 which will need 19bit entries. v2: Added Matt's RB. v3: Changed uint32_t to u32. v4: Fixed Maarten's review comment Credits-to: Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
-
- 12 Feb, 2019 3 commits
-
-
Chris Wilson authored
Use lockdep to warn before we wait indefinitely in case we may be waiting indefinitely. Suggested-by:
Mika Kuoppala <mika.kuoppala@intel.com> References: 2caffbf1 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190212130831.14425-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
We cannot nest i915_reset_trylock() as the inner may wait for the I915_RESET_BACKOFF which in turn is waiting upon sync_srcu who is waiting for our outermost lock. As we take the reset srcu around the fence update, we have to defer taking it in i915_gem_fault() until after we acquire the pin on the fence to avoid nesting. This is a little ugly, but still works. If a reset occurs between i915_vma_pin_fence() and the second reset lock, the reset will restore the fence register back to the pinned value before the reset lock allows us to proceed (our mmap won't be revoked as we haven't yet marked it as being a userfault as that requires us to hold the reset lock), so the pagefault is still serialised with the revocation in reset. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109605 Fixes: 2caffbf1 ("drm/i915: Revoke mmaps and prevent access to fence registers across reset") Signed-off-by:
-
Ville Syrjälä authored
Currently we're only dumping out the ddb allocation changes, let's do the same for the watermarks. This should help with debugging underruns and whatnot. First I tried one line per plane per wm level, but that resulted in an obnoxious amount of lines printed. So as a compromise I settled on a four line format, each line containing a single watermark related value (enable,lines,blocks,min_ddb_alloc) for all 8 levels (+trans wm). It still produces quite a lot of output but I can't really see a way around that because we simply have a lot of data to dump. Let's also pimp the ddb debug to print the size of the allocations too, not just their bounds. Makes it a bit easier to compare against the watermarks. Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com>
-
- 11 Feb, 2019 7 commits
-
-
Chris Wilson authored
If we drop the engine lock, we may run execlists_dequeue which may free the priolist. Therefore if we ever drop the execution lock on the engine, we have to discard our cache and refetch the priolist to ensure we do not use a stale pointer. [ 506.418935] [IGT] gem_exec_whisper: starting subtest contexts-priority [ 593.240825] general protection fault: 0000 [#1] SMP [ 593.240863] CPU: 1 PID: 494 Comm: gem_exec_whispe Tainted: G U 5.0.0-rc6+ #100 [ 593.240879] Hardware name: /NUC6CAYB, BIOS AYAPLCEL.86A.0029.2016.1124.1625 11/24/2016 [ 593.240965] RIP: 0010:__i915_schedule+0x1fe/0x320 [i915] [ 593.240981] Code: 48 8b 0c 24 48 89 c3 49 8b 45 28 49 8b 75 20 4c 89 3c 24 48 89 46 08 48 89 30 48 8b 43 08 48 89 4b 08 49 89 5d 20 49 89 45 28 <48> 89 08 45 39 a7 b8 03 00 00 7d 44 45 89 a7 b8 03 00 00 49 8b 85 [ 593.240999] RSP: 0018:ffffc90000057a60 EFLAGS: 00010046 [ 593.241013] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8882582d7870 RCX: ffff88826baba6f0 [ 593.241026] RDX: 0000000000000000 RSI: ffff8882582d6e70 RDI: ffff888273482194 [ 593.241049] RBP: ffffc90000057a68 R08: ffff8882582d7680 R09: ffff8882582d7840 [ 593.241068] R10: 0000000000000000 R11: ffffea00095ebe08 R12: 0000000000000728 [ 593.241105] R13: ffff88826baba6d0 R14: ffffc90000057a40 R15: ffff888273482158 [ 593.241120] FS: 00007f4613fb3900(0000) GS:ffff888277a80000(0000) knlGS:0000000000000000 [ 593.241133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 593.241146] CR2: 00007f57d3c66a84 CR3: 000000026e2b6000 CR4: 00000000001406e0 [ 593.241158] Call Trace: [ 593.241233] i915_schedule+0x1f/0x30 [i915] [ 593.241326] i915_request_add+0x1a9/0x290 [i915] [ 593.241393] i915_gem_do_execbuffer+0x45f/0x1150 [i915] [ 593.241411] ? init_object+0x49/0x80 [ 593.241425] ? ___slab_alloc.constprop.91+0x4b8/0x4e0 [ 593.241491] ? i915_gem_execbuffer2_ioctl+0x99/0x380 [i915] [ 593.241563] ? i915_gem_execbuffer_ioctl+0x270/0x270 [i915] [ 593.241629] i915_gem_execbuffer2_ioctl+0x1bb/0x380 [i915] [ 593.241705] ? i915_gem_execbuffer_ioctl+0x270/0x270 [i915] [ 593.241724] drm_ioctl_kernel+0x81/0xd0 [ 593.241738] drm_ioctl+0x1a7/0x310 [ 593.241803] ? i915_gem_execbuffer_ioctl+0x270/0x270 [i915] [ 593.241819] ? __update_load_avg_se+0x1c9/0x240 [ 593.241834] ? pick_next_entity+0x7e/0x120 [ 593.241851] do_vfs_ioctl+0x88/0x5d0 [ 593.241880] ksys_ioctl+0x35/0x70 [ 593.241894] __x64_sys_ioctl+0x11/0x20 [ 593.241907] do_syscall_64+0x44/0xf0 [ 593.241924] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 593.241940] RIP: 0033:0x7f4615ffe757 [ 593.241952] Code: 00 00 90 48 8b 05 39 a7 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 a7 0c 00 f7 d8 64 89 01 48 [ 593.241970] RSP: 002b:00007ffc1030ddf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 593.241984] RAX: ffffffffffffffda RBX: 00007ffc10324420 RCX: 00007f4615ffe757 [ 593.241997] RDX: 00007ffc1030e220 RSI: 0000000040406469 RDI: 0000000000000003 [ 593.242010] RBP: 00007ffc1030e220 R08: 00007f46160c9208 R09: 00007f46160c9240 [ 593.242022] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000040406469 [ 593.242038] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000 [ 593.242058] Modules linked in: i915 intel_gtt drm_kms_helper prime_numbers v2: Track the local engine cache and explicitly clear it when switching engine locks. Fixes: a02eb975 ("drm/i915/execlists: Cache the priolist when rescheduling") Testcase: igt/gem_exec_whisper/contexts-priority # rare! Signed-off-by:
-
Chris Wilson authored
While this is mainly only useful for ELSP[0], it is definitely useful to know the current timeline seqno wrt to the queued set of requests for that port, as this carries additional information above and beyond the near-defunct global_seqno and global HWSP. Signed-off-by:
-
Chris Wilson authored
We impose upon ourselves a strict timeout for resets (to ensure forward progress by use of a failsafe). Prefer to use the expedited synchronisation function in this case to reduce the likelihood of a spurious delay being treated as a deadlock. Signed-off-by:
-
Chris Wilson authored
We need to flush our srcu protecting resources about to be clobbered by the reset, inside of our timer failsafe but outside of the error->wedge_mutex, so that the failsafe can run in case the synchronize_srcu() takes too long (hits a shrinker deadlock?). Fixes: 72eb16df ("drm/i915: Serialise resets with wedging") References: https://bugs.freedesktop.org/show_bug.cgi?id=109605Signed-off-by:
-
Jani Nikula authored
Starting from opregion version 2.1 (roughly corresponding to ICL+) the RVDA field is relative from the beginning of opregion, not absolute address. Fix the error path while at it. v2: Make relative vs. absolute conditional on the opregion version, bumped for the purpose. Turned out there are machines relying on absolute RVDA in the wild. v3: Fix the version checks Fixes: 04ebaadb ("drm/i915/opregion: handle VBT sizes bigger than 6 KB") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: -
Jani Nikula authored
The u32 version field encodes major, minor, revision and reserved. We've basically been checking for any non-zero version. Add opregion version logging while at it. v2: Fix the fix of the version check Fixes: 04ebaadb ("drm/i915/opregion: handle VBT sizes bigger than 6 KB") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Chris Wilson authored
If we allocate while iterating the rbtree of active nodes, we may hit the shrinker and so retire the i915_active, reaping the rbtree. Modifying the rbtree as we iterate is not good behaviour, so acquire the i915_active first to keep the tree intact whenever we allocate. Fixes: a42375af ("drm/i915: Release the active tracker tree upon idling") Signed-off-by:
-
- 09 Feb, 2019 1 commit
-
-
Chris Wilson authored
In the next patch, we add another user that wants to check whether requests can be merge into a single HW execution, and in the future we want to add more conditions under which requests from the same context cannot be merge. In preparation, extract out can_merge_rq(). v2: Reorder tests to decide if we can continue filling ELSP and bonus comments. Signed-off-by:
-
- 08 Feb, 2019 14 commits
-
-
Chris Wilson authored
If we haven't even begun executing the payload of the stalled request, then we should not claim that its userspace context was guilty of submitting a hanging batch. v2: Check for context corruption before trying to restart. v3: Preserve semaphores on skipping requests (need to keep the timelines intact). Signed-off-by:
-
Chris Wilson authored
Prevent concurrent set-wedge with ongoing resets (and vice versa) by taking the same wedge_mutex around both operations. Signed-off-by:
-
Chris Wilson authored
Since we use the debugfs to recover the device after modifying the i915.reset parameter, we need to be sure that we apply the reset and not piggy-back onto a concurrent one in order for the parameter to take effect. Signed-off-by:
-
Chris Wilson authored
On wedging, we mark all executing requests as complete and all pending requests completed as soon as they are ready. Before unwedging though we wish to flush those pending requests prior to restoring default execution, and so we must wait. Do so uninterruptibly as we do not provide the EINTR gracefully back to userspace in this case but persists in keeping the permanently wedged state without restarting the syscall. Signed-off-by:
-
Chris Wilson authored
When declaring the GPU wedged, we do need to hit the GPU with the reset hammer so that its state matches our presumed state during cleanup. If the reset fails, it fails, and we may be unhappy but wedged. However, if we are testing our wedge/unwedged handling, the desync carries over into the next test and promptly explodes. References: https://bugs.freedesktop.org/show_bug.cgi?id=106702Signed-off-by:
-
Chris Wilson authored
Previously, we were able to rely on the recursive properties of struct_mutex to allow us to serialise revoking mmaps and reacquiring the FENCE registers with them being clobbered over a global device reset. I then proceeded to throw out the baby with the bath water in order to pursue a struct_mutex-less reset. Perusing LWN for alternative strategies, the dilemma on how to serialise access to a global resource on one side was answered by https://lwn.net/Articles/202847/ -- Sleepable RCU: 1 int readside(void) { 2 int idx; 3 rcu_read_lock(); 4 if (nomoresrcu) { 5 rcu_read_unlock(); 6 return -EINVAL; 7 } 8 idx = srcu_read_lock(&ss); 9 rcu_read_unlock(); 10 /* SRCU read-side critical section. */ 11 srcu_read_unlock(&ss, idx); 12 return 0; 13 } 14 15 void cleanup(void) 16 { 17 nomoresrcu = 1; 18 synchronize_rcu(); 19 synchronize_srcu(&ss); 20 cleanup_srcu_struct(&ss); 21 } No more worrying about stop_machine, just an uber-complex mutex, optimised for reads, with the overhead pushed to the rare reset path. However, we do run the risk of a deadlock as we allocate underneath the SRCU read lock, and the allocation may require a GPU reset, causing a dependency cycle via the in-flight requests. We resolve that by declaring the driver wedged and cancelling all in-flight rendering. v2: Use expedited rcu barriers to match our earlier timing characteristics. v3: Try to annotate locking contexts for sparse v4: Reduce selftest lock duration to avoid a reset deadlock with fences v5: s/srcu/reset_backoff_srcu/ v6: Remove more stale comments Testcase: igt/gem_mmap_gtt/hang Fixes: eb8d0f5a ("drm/i915: Remove GPU reset dependence on struct_mutex") Signed-off-by:
-
Chris Wilson authored
Currently, we may simultaneously release the fence register from both fence_update() and i915_gem_restore_fences(). This is dangerous, so defer the bookkeeping entirely to i915_gem_restore_fences() when the device is asleep. Reported-by:
-
Ville Syrjälä authored
On g4x+ we depend on the primary plane DSPCNTR gamma/csc enable bits for the pipe bottom color. To guarantee that those are correct already when enabling the crtc let's do an explicit ->disable_plane() call before enabling the pipe. On skl+ this will be handled by the explicit PIPE_BOTTOM_COLOR register which is already part of the normal color commit we do durign crtc enable. Signed-off-by:
-
Ville Syrjälä authored
Planes scanning out C8 will want to use the legacy lut as their palette. That means the LUT content are unlikely to be useful for gamma correction on other planes. Thus we should disable pipe gamma for all the other planes. And we should reject any non legacy LUT configurations when C8 planes are present. Fixes the appearance of the hw cursor when running X -depth 8. Note that CHV with it's independent CGM degamma/gamma LUTs could probably use the CGM for gamma correction even when the legacy LUT is used for C8. But that would require a new uapi for configuring the legacy LUT and CGM LUTs at the same time. Totally not worth it. v2: Fix typo (Uma) Rebase Signed-off-by: -
Ville Syrjälä authored
As with pipe gamma we can avoid the potential precision loss from the pipe csc unit when there is no need to use it. And again we need the same logic for updating the planes. v2: Rebase Signed-off-by:
-
Ville Syrjälä authored
The pipe internal precision is higher than what we currently program to the degamma/gamma LUTs. We can get a higher quality image by bypassing the LUTs when they're not needed. Let's do that. Each plane has its own control bit for this, so we have to update all active planes. The way we've done this we don't actually have to run through the whole .check_plane() thing. And we actually do the .color_check() after .check_plane() so we couldn't even do that without shuffling the code around. Additionally on pre-skl we have to update the primary plane regardless of whether it's active or not on account of the primary plane gamma enable bit also affecting the pipe bottom color. v2: Drop the '.' from patch title (Uma) Fix 'primayr' typo (Uma,Matt) Rebase Signed-off-by: -
Ville Syrjälä authored
Just like we did for pipe gamma, let's also track the pipe csc state. The hardware only exists on ILK+, and currently we always enable it on hsw+ and never on any other platforms. Just like with pipe gamma, the primary plane control register is used for the readout on pre-SKL, and the pipe bottom color register on SKL+. v2: Rebase v3: Allow fastboot with csc_enable changes (Maarten) Deal with HAS_GMCH Signed-off-by: -
Ville Syrjälä authored
Track whether pipe gamma is enabled or disabled. For now we stick to the current behaviour of always enabling gamma. But we do get working state readout for this now. On SKL+ we use the pipe bottom color as our hardware state. On pre-SKL we read the state back from the primary plane control register. That only really correct for g4x+, as older platforms never gamma correct pipe bottom color. But doing the readout the same way on all platforms is fine, and there is no other way to do it really. v2: Initialize val at declaration (Uma) Drop the bogus skl scaler comment change (Uma) Rebase v3: Allow fastboot with gamma_enable changes (Maarten) v4: Drop the PIPE_BOTTOM_COLOR write from intel_update_pipe_config() again. It snuck back in during the rebase Signed-off-by: -
Ville Syrjälä authored
On pre-HSW gamma mode is configured via PIPECONF. The bits are the same except shifted up, so we can reuse just store them in crtc_state->gamma_mode in the HSW+ way, allowing us to share some code later. v2: Allow fastboot with gamma_mode changes (Maarten) Add space around the '<<' in the reg macro Deal with HAS_GMCH Signed-off-by:
-
- 07 Feb, 2019 6 commits
-
-
José Roberto de Souza authored
Changing the i915_edp_psr_debug was enabling, disabling or switching PSR version by directly calling intel_psr_disable_locked() and intel_psr_enable_locked(), what is not the default PSR path that will be executed by real users. So lets force a fastset in the PSR CRTC to trigger a pipe update and stress the default code path. Recently a bug was found when switching from PSR2 to PSR1 while enable_psr kernel parameter was set to the default parameter, this changes fix it and also fixes the bug linked bellow were DRRS was left enabled together with PSR when enabling PSR from debugfs. v2: Handling missing case: disabled to PSR1 v3: Not duplicating the whole atomic state(Maarten) v4: Adding back the missing call to intel_psr_irq_control(Dhinakaran) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108341 Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190206211845.5322-1-jose.souza@intel.com
-
Ramalingam C authored
The downgrade of the fullmodeset into fastset intel_encoder->update_pipe, in possible scenario, skips the En/Dis-able DDI. Hence breaks the HDCP state change handling. We also don't have any hdcp tests in CI, because the shard runs don't have hdcp capable outputs :-/ So this change fixs it by handling the HDCP state change request at intel_encoder->update_pipe too along with enable and disable of the DDI. Fixes: d19f958d ("drm/i915: Enable fastset for non-boot modesets.") v2: Added commit id that broke the HDCP [Daniel] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> cc: Hans de Goede <hdegoede@redhat.com> cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1549295080-18353-1-git-send-email-ramalingam.c@intel.com
-
Rodrigo Vivi authored
Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Ville Syrjälä authored
The LUTs are single buffered so we should program them after the double buffered pipe updates have been latched by the hardware. We'll also fix up the IPS vs. split gamma w/a to do the IPS disable like everyone else. Note that this is currently dead code as we don't use the split gamma mode on HSW, but that will be fixed up shortly. Signed-off-by:
-
Ville Syrjälä authored
Split the color management hooks along the single vs. double buffered registers line. Of the currently programmed registers GAMMA_MODE and the ilk+ pipe CSC are double buffered, the LUTS and CHV CGM block are single buffered. The double buffered register will be programmed during the normal pipe update with evasion, and also during pipe enable so that the settings will already be correct when the pipe starts up before the planes are enabled. The single buffered registers are currently programmed before the vblank evade. Which is totally wrong, but we'll correct that later. v2: Add some docs to explain the two vfuncs (Matt,Uma) Rebase Signed-off-by: -
Ville Syrjälä authored
For bdw+ let's move the GAMMA_MODE write for the legacy LUT mode into the .load_luts() funciton directly, rather than relying on haswell_load_luts(). We'll be getting rid of haswell_load_luts() entirely soon, and it's anyway cleaner to have the GAMMA_MODE write in a single place. Signed-off-by:
-
