Pull v9fs update from Eric Van Hensbergen.

* tag 'for-linus-merge-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9P: Fix race between p9_write_work() and p9_fd_request()
  9P: Fix race in p9_write_work()
  9P: fix test at the end of p9_write_work()
  9P: Fix race in p9_read_work()
  9p: don't use __getname/__putname for uname/aname
  net/9p: Check errno validity
  fs/9p: avoid debug OOPS when reading a long symlink

Race scenario:

thread A			thread B

p9_write_work()                p9_fd_request()

if (list_empty
  (&m->unsent_req_list))
  ...

                               spin_lock(&client->lock);
                               req->status = REQ_STATUS_UNSENT;
                               list_add_tail(..., &m->unsent_req_list);
                               spin_unlock(&client->lock);
                               ....
                               if (n & POLLOUT &&
                               !test_and_set_bit(Wworksched, &m->wsched)
                               schedule_work(&m->wq);
                               --> not done because Wworksched is set

  clear_bit(Wworksched, &m->wsched);
  return;

--> nobody will take care of sending the new request.

This is not very likely to happen though, because p9_write_work()
being called with an empty unsent_req_list is not frequent.
But this also means that taking the lock earlier will not be costly.
Signed-off-by: Simon Derr <simon.derr@bull.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Pull i2c-embedded changes from Wolfram Sang:
 "The changes for i2c-embedded include:

   - massive rework of the omap driver
   - massive rework of the at91 driver.  In fact, the old driver gets
     removed; I am okay with this approach since the old driver was
     depending on BROKEN and its limitations made it practically
     unusable, so people used bitbanging instead.  But even if there are
     users, there is no platform_data or module parameter which would
     need to be converted.  It is just another driver doing I2C
     transfers, just way better.  Modifications of arch/arm/at91 related
     files have proper acks from the maintainer.
   - new driver for R-Car I2C
   - devicetree and generic_clock conversions and fixes
   - usual driver fixes and changes.

  The rework patches have come a long way and lots of people have been
  involved in creating/testing them.  Most patches have been in
  linux-next at least since 3.6-rc5.  A few have been added in the last
  week, I have to admit.

  An unexpected (but welcome :)) peak in private life is the cause for
  that.  The "late" patches shouldn't cause any merge conflicts and I
  will have a special eye on them during the stabilization phase.  This
  is an exception and I want to have the patches in place properly in
  time again for the next kernels."

* 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (44 commits)
  MXS: Implement DMA support into mxs-i2c
  i2c: add Renesas R-Car I2C driver
  i2c: s3c2410: use clk_prepare_enable and clk_disable_unprepare
  ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints
  i2c: nomadik: Add Device Tree support to the Nomadik I2C driver
  i2c: algo: pca: Fix chip reset function for PCA9665
  i2c: mpc: Wait for STOP to hit the bus
  i2c: davinci: preparation for switch to common clock framework
  omap-i2c: fix incorrect log message when using a device tree
  i2c: omap: sanitize exit path
  i2c: omap: switch over to autosuspend API
  i2c: omap: remove unnecessary pm_runtime_suspended check
  i2c: omap: switch to threaded IRQ support
  i2c: omap: remove redundant status read
  i2c: omap: get rid of the "complete" label
  i2c: omap: resize fifos before each message
  i2c: omap: simplify IRQ exit path
  i2c: omap: always return IRQ_HANDLED
  i2c: omap: simplify errata check
  i2c: omap: bus: add a receiver flag
  ...

Pull ARM SoC fixes from Olof Johansson:
 "A series of fixes (and in some cases, some cleanups):

  Via Tony Lindgren:
   - A collection of OMAP regression fixes, in particular because
     firmware no longer sets up all pin states before starting the
     kernel.
   - cpufreq fixes for OMAP (Rafael is on vacation and this was
     pre-agreed).
   - A longer series of misc regression fixes and cleanups, warning
     removals, etc for OMAP

  From Arnd Bergmann:
   - A series of warning fixes for various platforms (defconfig builds)

  Misc:
   - A couple of tegra fixes, one for i.MX, some vt8500 fixes, etc."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: pxa: armcore: fix PCI PIO warnings
  ARM: integrator: use __iomem pointers for MMIO, part 2
  ARM: assabet: fix bogus warning in get_assabet_scr (again)
  ARM: shmobile: mark shmobile_init_late as __init
  ARM: integrator_cp: fix build failure
  ARM: OMAP4/AM335x: hwmod: fix disable_module regression in hardreset handling
  ARM: OMAP3: fix workaround for EMU clockdomain
  arm/omap: Replace board_ref_clock with enum values
  ARM: OMAP2+: remove duplicated include from board-omap3stalker.c
  arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon
  arch/arm/mach-omap2: Remove unecessary semicolon
  arch/arm/mach-omap1/devices.c: Remove unecessary semicolon
  ARM/dts: omap5-evm: pinmux configuration for audio
  ARM/dts: Add pinctrl driver entries for omap5
  ARM/dts: omap4-panda: pinmux configuration for audio
  ARM/dts: omap4-sdp: pinmux configuration for audio
  ARM/dts: omap5-evm: Disable unused McBSP3
  ARM/dts: omap4-sdp: Disable unused McBSP3
  ARM/dts: omap4-panda: Disable unused audio IPs
  ARM: OMAP: board-omap4panda: Pin mux configuration for audio needs
  ...

In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING
mount pending flag is not cleared.

One effect of this is when using the "browse" option, directory entry
attributes show up with all "?"s due to the incorrect callback and
subsequent failure return (when in fact no callback should be made).
Signed-off-by: Ian Kent <ikent@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "Followups, fixes and some random stuff I found on the internet."

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (11 patches)
  perf: fix duplicate header inclusion
  memcg, kmem: fix build error when CONFIG_INET is disabled
  rtc: kconfig: fix RTC_INTF defaults connected to RTC_CLASS
  rapidio: fix comment
  lib/kasprintf.c: use kmalloc_track_caller() to get accurate traces for kvasprintf
  rapidio: update for destination ID allocation
  rapidio: update asynchronous discovery initialization
  rapidio: use msleep in discovery wait
  mm: compaction: fix bit ranges in {get,clear,set}_pageblock_skip()
  arch/powerpc/platforms/pseries/hotplug-memory.c: section removal cleanups
  arch/powerpc/platforms/pseries/hotplug-memory.c: fix section handling code

Pull block IO update from Jens Axboe:
 "Core block IO bits for 3.7.  Not a huge round this time, it contains:

   - First series from Kent cleaning up and generalizing bio allocation
     and freeing.

   - WRITE_SAME support from Martin.

   - Mikulas patches to prevent O_DIRECT crashes when someone changes
     the block size of a device.

   - Make bio_split() work on data-less bio's (like trim/discards).

   - A few other minor fixups."

Fixed up silent semantic mis-merge as per Mikulas Patocka and Andrew
Morton.  It is due to the VM no longer using a prio-tree (see commit
6b2dbba8: "mm: replace vma prio_tree with an interval tree").

So make set_blocksize() use mapping_mapped() instead of open-coding the
internal VM knowledge that has changed.

* 'for-3.7/core' of git://git.kernel.dk/linux-block: (26 commits)
  block: makes bio_split support bio without data
  scatterlist: refactor the sg_nents
  scatterlist: add sg_nents
  fs: fix include/percpu-rwsem.h export error
  percpu-rw-semaphore: fix documentation typos
  fs/block_dev.c:1644:5: sparse: symbol 'blkdev_mmap' was not declared
  blockdev: turn a rw semaphore into a percpu rw semaphore
  Fix a crash when block device is read and block size is changed at the same time
  block: fix request_queue->flags initialization
  block: lift the initial queue bypass mode on blk_register_queue() instead of blk_init_allocated_queue()
  block: ioctl to zero block ranges
  block: Make blkdev_issue_zeroout use WRITE SAME
  block: Implement support for WRITE SAME
  block: Consolidate command flag and queue limit checks for merges
  block: Clean up special command handling logic
  block/blk-tag.c: Remove useless kfree
  block: remove the duplicated setting for congestion_threshold
  block: reject invalid queue attribute values
  block: Add bio_clone_bioset(), bio_clone_kmalloc()
  block: Consolidate bio_alloc_bioset(), bio_kmalloc()
  ...

Pull a firewire fix from Stefan Richter:
 "Fixes an old bug of the /dev/fw* ioctl ABI."

* tag 'firewire-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

Pull vfio fixes from Alex Williamson:
 "This includes a fix for PCI BAR mmaps after recent mm changes, fixing
  an interrupt race, and fixing a consistency bug in interrupt state
  when switching interrupt modes."

* tag 'vfio-for-v3.7-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: Fix PCI INTx disable consistency
  vfio: Move PCI INTx eventfd setting earlier
  vfio: Fix PCI mmap after b3b9c293

#include <stdbool.h> somehow got duplicated on its way to linus's tree
(probably as a conflict resolution as things got sent through multiple
trees)
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e1aab161 ("socket: initial cgroup code.") causes a build
error when CONFIG_INET is disabled in Linus' tree:

  net/built-in.o: In function `sk_update_clone':
  net/core/sock.c:1336: undefined reference to `sock_update_memcg'

sock_update_memcg() is only defined when CONFIG_INET is enabled, so fix
it by defining the dummy function without this option.
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 6b8029fa ("rtc: kconfig: remove unnecessary dependencies")
removed various 'depends on RTC_CLASS' dependencies but also removed a
few 'default RTC_CLASS' statements, which actually changed default
behavior.

This resulted in the various RTC interfaces (sysfs, proc, dev) all being
disabled by default, even when RTC_CLASS is enabled:

   # CONFIG_RTC_INTF_SYSFS is not set
   # CONFIG_RTC_INTF_PROC is not set
   # CONFIG_RTC_INTF_DEV is not set

which is different from previous behavior (all of these where enabled.)

To fix, add back the 'default RTC_CLASS' statments to each of the
RTC_INTF_* options.

I noticed this because some RTC tests started failing on my TI OMAP
platforms because /dev/rtc0 was not present anymore, even though the
driver was present and RTC_CLASS was enabled.
Signed-off-by: Kevin Hilman <khilman@ti.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The resource index for the mailboxes was incorrect.
Signed-off-by: Chad Reese <kreese@caviumnetworks.com>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Previously kvasprintf() allocation was being done through kmalloc(),
thus producing an inaccurate trace report.

This is a common problem: in order to get accurate callsite tracing, a
lib/utils function shouldn't allocate kmalloc but instead use
kmalloc_track_caller.
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Address comments provided by Andrew Morton:
https://lkml.org/lkml/2012/10/3/550

 - Keeps consistent kerneldoc compatible comments style for new static
   functions.
 - Removes unnecessary complexity from destination ID allocation
   routine.
 - Uses kcalloc() for code clarity.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update discovery process initialization based on Andrew Morton's comments:
https://lkml.org/lkml/2012/10/3/552.

This update processes all enumerating mports first and schedules discovery
work after that. If the initialization routine fails to allocate resources
needed to execute discovery, it abandons discovery for all ports.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use msleep() for code clarity as suggested by Andrew Morton in his
comments for the original patch: https://lkml.org/lkml/2012/10/3/546.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

{get,clear,set}_pageblock_skip() use incorrect bit ranges (please compare
to bit ranges used by {get,set}_pageblock_flags() used for migration
types) and can overwrite pageblock migratetype of the next pageblock in
the bitmap.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Followups to d760afd4 ("memory-hotplug: suppress "Trying to free
nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning").

 - use unsigned long type, as overflows are conceivable

 - rename `i' to the less-misleading and more informative `section'

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix

  arch/powerpc/platforms/pseries/hotplug-memory.c: In function 'pseries_remove_memblock':
  arch/powerpc/platforms/pseries/hotplug-memory.c:103:17: error: unused variable 'pfn' [-Werror=unused-variable]

Caused by commit d760afd4 ("memory-hotplug: suppress "Trying to free
nonexistent resource <XXXXXXXXXXXXXXXX-YYYYYYYYYYYYYYYY>" warning").
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull hwmon updates from Jean Delvare:
 "Only trivial things this time"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: Drop needless includes of <linux/delay.h>
  hwmon: Add missing inclusions of <linux/err.h>
  hwmon: Add missing inclusions of <linux/jiffies.h>
  hwmon: Fix spelling of Celsius
  hwmon: Update Alexey Fisher's name

The virq_disabled flag tracks the userspace view of INTx masking
across interrupt mode changes, but we're not consistently applying
this to the interrupt and masking handler notion of the device.
Currently if the user sets DisINTx while in MSI or MSIX mode, then
returns to INTx mode (ex. rebooting a qemu guest), the hardware has
DisINTx+, but the management of INTx thinks it's enabled, making it
impossible to actually clear DisINTx.  Fix this by updating the
handler state when INTx is re-enabled.

Cc: stable@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

We need to be ready to recieve an interrupt as soon as we call
request_irq, so our eventfd context setting needs to be moved
earlier.  Without this, an interrupt from our device or one
sharing the interrupt line can pass a NULL into eventfd_signal
and oops.

Cc: stable@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Our mmap path mistakely relied on vma->vm_pgoff to get set in
remap_pfn_range.  After b3b9c293, that path only applies to
copy-on-write mappings.  Set it in our own code.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>

Pull NFS client updates from Trond Myklebust:
 "Features include:

   - Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
     Aside from the issues discussed at the LKS, distros are shipping
     NFSv4.1 with all the trimmings.
   - Fix fdatasync()/fsync() for the corner case of a server reboot.
   - NFSv4 OPEN access fix: finally distinguish correctly between
     open-for-read and open-for-execute permissions in all situations.
   - Ensure that the TCP socket is closed when we're in CLOSE_WAIT
   - More idmapper bugfixes
   - Lots of pNFS bugfixes and cleanups to remove unnecessary state and
     make the code easier to read.
   - In cases where a pNFS read or write fails, allow the client to
     resume trying layoutgets after two minutes of read/write-
     through-mds.
   - More net namespace fixes to the NFSv4 callback code.
   - More net namespace fixes to the NFSv3 locking code.
   - More NFSv4 migration preparatory patches.
     Including patches to detect network trunking in both NFSv4 and
     NFSv4.1
   - pNFS block updates to optimise LAYOUTGET calls."

* tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (113 commits)
  pnfsblock: cleanup nfs4_blkdev_get
  NFS41: send real read size in layoutget
  NFS41: send real write size in layoutget
  NFS: track direct IO left bytes
  NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked()
  NFSv4.1: Ensure that the layout sequence id stays 'close' to the current
  NFSv4.1: Deal with seqid wraparound in the pNFS return-on-close code
  NFSv4 set open access operation call flag in nfs4_init_opendata_res
  NFSv4.1: Remove the dependency on CONFIG_EXPERIMENTAL
  NFSv4 reduce attribute requests for open reclaim
  NFSv4: nfs4_open_done first must check that GETATTR decoded a file type
  NFSv4.1: Deal with wraparound when updating the layout "barrier" seqid
  NFSv4.1: Deal with wraparound issues when updating the layout stateid
  NFSv4.1: Always set the layout stateid if this is the first layoutget
  NFSv4.1: Fix another refcount issue in pnfs_find_alloc_layout
  NFSv4: don't put ACCESS in OPEN compound if O_EXCL
  NFSv4: don't check MAY_WRITE access bit in OPEN
  NFS: Set key construction data for the legacy upcall
  NFSv4.1: don't do two EXCHANGE_IDs on mount
  NFS: nfs41_walk_client_list(): re-lock before iterating
  ...

These drivers use no sleep or delay functions so they don't need to
include <linux/delay.h>.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Rudolf Marek <r.marek@assembler.cz>

These drivers use IS_ERR so they should include <linux/err.h>.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Henrik Rydberg <rydberg@euromail.se>

Many hwmon drivers use jiffies but omit the inclusion of the header
file. Fix that, and also fix one driver which was including the header
file but didn't need it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Luca Tettamanti <kronos.it@gmail.com>
Cc: Marc Hulsman <m.hulsman@tudelft.nl>
Cc: Rudolf Marek <r.marek@assembler.cz>

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

My name was change after migration.
Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Pull pwm changes from Thierry Reding:
 "All legacy PWM providers have now been moved to the PWM subsystem.
  The plan for 3.8 is to adapt all board files to provide a lookup table
  for PWM devices in order to get rid of the global namespace.
  Subsequently, users of the legacy pwm_request() and pwm_free()
  functions can be migrated to the new pwm_get() and pwm_put()
  functions.  Once this has been completed, the legacy API and the
  compatibility code in the core can be removed.

  In addition to the above, these changes also add support for
  configuring the polarity of a PWM signal (currently only supported on
  ECAP and EHRPWM) and include a much needed rework of the i.MX driver.
  Managed functions to obtain and release a PWM device (devm_pwm_get()
  and devm_pwm_put()) have been added and the pwm-backlight driver has
  been updated to use them.  If the PWM subsystem hasn't been enabled,
  dummy functions are provided that allow the subsystem to safely
  compile out.

  Some common checks on input parameters have been moved to the core and
  removed from the drivers.  Finally, a small fix corrects the
  description of the PWM specifier's second cell in the device tree
  representation."

* tag 'for-3.7-rc1' of git://gitorious.org/linux-pwm/linux-pwm: (23 commits)
  pwm: dt: Fix description of second PWM cell
  pwm: Check for negative duty-cycle and period
  pwm: Add Ingenic JZ4740 support
  MIPS: JZ4740: Export timer API
  pwm: Move PUV3 PWM driver to PWM framework
  unicore32: pwm: Use managed resource allocations
  unicore32: pwm: Remove unnecessary indirection
  unicore32: pwm: Use module_platform_driver()
  unicore32: pwm: Properly remap memory-mapped registers
  pwm-backlight: Use devm_pwm_get() instead of pwm_get()
  pwm: Move AB8500 PWM driver to PWM framework
  pwm: Fix compilation error when CONFIG_PWM is not defined
  pwm: i.MX: fix clock lookup
  pwm: i.MX: use per clock unconditionally
  pwm: i.MX: add devicetree support
  pwm: i.MX: Use module_platform_driver
  pwm: i.MX: add functions to enable/disable pwm.
  pwm: i.MX: remove unnecessary if in pwm_[en|dis]able
  pwm: i.MX: factor out SoC specific functions
  pwm: pwm-tiehrpwm: Add support for configuring polarity of PWM
  ...

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (24 commits)
  leds: add output driver configuration for pca9633 led driver
  leds: lm3642: Use regmap_update_bits() in lm3642_chip_init()
  leds: Add new LED driver for lm3642 chips
  leds-lp5523: Fix riskiness of the page fault
  leds-lp5523: turn off the LED engines on unloading the driver
  leds-lm3530: Fix smatch warnings
  leds-lm3530: Use devm_regulator_get function
  leds: leds-gpio: adopt pinctrl support
  leds: Add new LED driver for lm355x chips
  leds-lp5523: use the i2c device id rather than fixed name
  leds-lp5523: add new device id for LP55231
  leds-lp5523: support new LP55231 device
  leds: triggers: send uevent when changing triggers
  leds-lp5523: minor code style fixes
  leds-lp5523: change the return type of lp5523_set_mode()
  leds-lp5523: set the brightness to 0 forcely on removing the driver
  leds-lp5523: add channel name in the platform data
  leds: leds-gpio: Use of_get_child_count() helper
  leds: leds-gpio: Use platform_{get,set}_drvdata
  leds: leds-gpio: use of_match_ptr()
  ...

Pull scsi target updates from Nicholas Bellinger:
 "Things have been calm for the most part with no new fabric drivers in
  flight for v3.7 (we're up to eight now !), so this update is primarily
  focused on addressing a few long-standing items within target-core and
  iscsi-target fabric code.

  The highlights include:

   - target: Simplify fabric sense data length handling (roland)
   - qla2xxx: Fix endianness of task management response code (roland)
   - target: fix truncation of mode data, support zero allocation length
     (paolo)
   - target: Properly support zero-length commands in normal processing
     path (paolo)
   - iscsi-target: Correctly set 0xffffffff field within ISCSI_OP_REJECT
     PDU (ronnie + nab)
   - iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG
     demo-mode (ronnie + nab)
   - target/file: Re-enable optional fd_buffered_io=1 operation (nab +
     hch)
   - iscsi-target: Add MaxXmitDataSegmenthLength forr target ->
     initiator MDRSL declaration (nab)
   - target: Add target_submit_cmd_map_sgls for SGL fabric memory
     passthrough (nab + hch)
   - tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls (hch +
     nab)
   - tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls (nab
     + hch)

  The last series for adding a new target_submit_cmd_map_sgls() fabric
  caller (as requested by hch) that accepts pre-allocated SGL memory
  (using existing logic), along with converting tcm_loop + tcm_vhost has
  only been in -next for the last days, but has gotten enough review
  +testing and is clear enough a mechanical change that I think it's
  reasonable to merge for -rc1 code.

  Thanks again to everyone who contributed this round! Extra special
  thanks to Roland (PureStorage) for tracking down the qla2xxx target
  TMR response code endian issue, and to Paolo (Redhat) for resolving
  the long standing zero-length CDB issues within target-core between
  virtual and pSCSI backends."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
  iscsi-target: Bump defaults for nopin_timeout + nopin_response_timeout values
  iscsit: proper endianess conversions
  iscsit: use the itt_t abstract type
  iscsit: add missing endianess conversion in iscsit_check_inaddr_any
  iscsit: remove incorrect unlock in iscsit_build_sendtargets_resp
  iscsit: mark various functions static
  target/iscsi: precedence bug in iscsit_set_dataout_sequence_values()
  target/usb-gadget: strlen() doesn't count the terminator
  target/usb-gadget: remove duplicate initialization
  tcm_vhost: Convert I/O path to use target_submit_cmd_map_sgls
  target: Add control CDB READ payload zero work-around
  tcm_loop: Convert I/O path to use target_submit_cmd_map_sgls
  target: Add target_submit_cmd_map_sgls for SGL fabric memory passthrough
  iscsi-target: Add explicit set of cache_dynamic_acls=1 for TPG demo-mode
  iscsi-target: Change iscsi_target_seq_pdu_list.c to honor MaxXmitDataSegmentLength
  iscsi-target: Add MaxXmitDataSegmentLength connection recovery check
  iscsi-target: Convert incoming PDU payload checks to MaxXmitDataSegmentLength
  iscsi-target: Enable MaxXmitDataSegmentLength operation in login path
  iscsi-target: Add base MaxXmitDataSegmentLength code
  target/file: Re-enable optional fd_buffered_io=1 operation
  ...

Pull second s390 update from Martin Schwidefsky:
 "The big thing in this pull request is the UAPI patch from David, and
  worth mentioning is the page table dumper.  The rest are small
  improvements and bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/entry: fix svc number for TIF_SYSCALL system call restart
  s390/mm,vmem: fix vmem_add_mem()/vmem_remove_range()
  s390/vmalloc: have separate modules area
  s390/zcrypt: remove duplicated include from zcrypt_pcixcc.c
  s390/css_chars: remove superfluous ifdef
  s390/chsc: make headers usable
  s390/mm: let kernel text section always begin at 1MB
  s390/mm: fix mapping of read-only kernel text section
  s390/mm: add page table dumper
  s390: add support to start the kernel in 64 bit mode.
  s390/mm,pageattr: remove superfluous EXPORT_SYMBOLs
  s390/mm,pageattr: add more page table walk sanity checks
  s390/mm: fix pmd_huge() usage for kernel mapping
  s390/dcssblk: cleanup device attribute usage
  s390/mm: use pfmf instruction to initialize storage keys
  s390/facilities: cleanup PFMF and HPAGE machine facility detection
  UAPI: (Scripted) Disintegrate arch/s390/include/asm

Pull nouveau drm fixes from Dave Airlie:
 "Just a bunch of nouveau fixes, Ben wants to get some alternate
  versions into stable."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau/timer: bump ptimer's alarm delay from u32 to u64
  drm/nouveau/fan: fix a typo in PWM's input clock calculation
  drm/nv50/clk: wire up pll_calc hook
  drm/nouveau: remove unused _nouveau_parent_ctor
  drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB

Pull generic execve() changes from Al Viro:
 "This introduces the generic kernel_thread() and kernel_execve()
  functions, and switches x86, arm, alpha, um and s390 over to them."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (26 commits)
  s390: convert to generic kernel_execve()
  s390: switch to generic kernel_thread()
  s390: fold kernel_thread_helper() into ret_from_fork()
  s390: fold execve_tail() into start_thread(), convert to generic sys_execve()
  um: switch to generic kernel_thread()
  x86, um/x86: switch to generic sys_execve and kernel_execve
  x86: split ret_from_fork
  alpha: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
  alpha: switch to generic kernel_thread()
  alpha: switch to generic sys_execve()
  arm: get rid of execve wrapper, switch to generic execve() implementation
  arm: optimized current_pt_regs()
  arm: introduce ret_from_kernel_execve(), switch to generic kernel_execve()
  arm: split ret_from_fork, simplify kernel_thread() [based on patch by rmk]
  generic sys_execve()
  generic kernel_execve()
  new helper: current_pt_regs()
  preparation for generic kernel_thread()
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  ...

Pull UML changes from Richard Weinberger:
 "UML receives this time only cleanups.

  The most outstanding change is the 'include "foo.h"' do 'include
  <foo.h>' conversion done by Al Viro.

  It touches many files, that's why the diffstat is rather big."

* 'for-linus-37rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  typo in UserModeLinux-HOWTO
  hppfs: fix the return value of get_inode()
  hostfs: drop vmtruncate
  um: get rid of pointless include "..." where include <...> will do
  um: move sysrq.h out of include/shared
  um/x86: merge 32 and 64 bit variants of ptrace.h
  um/x86: merge 32 and 64bit variants of checksum.h

Pull networking updates from David Miller:

 1) UAPI changes for networking from David Howells

 2) A netlink dump is an operation we can sleep within, and therefore we
    need to make sure the dump provider module doesn't disappear on us
    meanwhile.  Fix from Gao Feng.

 3) Now that tunnels support GRO, we have to be more careful in
    skb_gro_reset_offset() otherwise we OOPS, from Eric Dumazet.

 4) We can end up processing packets for VLANs we aren't actually
    configured to be on, fix from Florian Zumbiehl.

 5) Fix routing cache removal regression in redirects and IPVS.  The
    core issue on the IPVS side is that it wants to rewrite who the
    nexthop is and we have to explicitly accomodate that case.  From
    Julian Anastasov.

 6) Error code return fixes all over the networking drivers from Peter
    Senna Tschudin.

 7) Fix routing cache removal regressions in IPSEC, from Steffen
    Klassert.

 8) Fix deadlock in RDS during pings, from Jeff Liu.

 9) Neighbour packet queue can trigger skb_under_panic() because we do
    not reset the network header of the SKB in the right spot.  From
    Ramesh Nagappa.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
  RDS: fix rds-ping spinlock recursion
  netdev/phy: Prototype of_mdio_find_bus()
  farsync: fix support for over 30 cards
  be2net: Remove code that stops further access to BE NIC based on UE bits
  pch_gbe: Fix build error by selecting all the possible dependencies.
  e1000e: add device IDs for i218
  ixgbe/ixgbevf: Limit maximum jumbo frame size to 9.5K to avoid Tx hangs
  ixgbevf: Set the netdev number of Tx queues
  UAPI: (Scripted) Disintegrate include/linux/tc_ematch
  UAPI: (Scripted) Disintegrate include/linux/tc_act
  UAPI: (Scripted) Disintegrate include/linux/netfilter_ipv6
  UAPI: (Scripted) Disintegrate include/linux/netfilter_ipv4
  UAPI: (Scripted) Disintegrate include/linux/netfilter_bridge
  UAPI: (Scripted) Disintegrate include/linux/netfilter_arp
  UAPI: (Scripted) Disintegrate include/linux/netfilter/ipset
  UAPI: (Scripted) Disintegrate include/linux/netfilter
  UAPI: (Scripted) Disintegrate include/linux/isdn
  UAPI: (Scripted) Disintegrate include/linux/caif
  net: fix typo in freescale/ucc_geth.c
  vxlan: fix more sparse warnings
  ...

Pull sparc update from David Miller:
 "This is just the UAPI commits for sparc via David Howells."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  UAPI: (Scripted) Disintegrate arch/sparc/include/asm

Pull slave-dmaengine updates from Vinod Koul:
 "This time we have Andy updates on dw_dmac which is attempting to make
  this IP block available as PCI and platform device though not fully
  complete this time.

  We also have TI EDMA moving the dma driver to use dmaengine APIs, also
  have a new driver for mmp-tdma, along with bunch of small updates.

  Now for your excitement the merge is little unusual here, while
  merging the auto merge on linux-next picks wrong choice for pl330
  (drivers/dma/pl330.c) and this causes build failure.  The correct
  resolution is in linux-next.  (DMA: PL330: Fix build error) I didn't
  back merge your tree this time as you are better than me so no point
  in doing that for me :)"

Fixed the pl330 conflict as in linux-next, along with trivial header
file conflicts due to changed includes.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits)
  dma: tegra: fix interrupt name issue with apb dma.
  dw_dmac: fix a regression in dwc_prep_dma_memcpy
  dw_dmac: introduce software emulation of LLP transfers
  dw_dmac: autoconfigure data_width or get it via platform data
  dw_dmac: autoconfigure block_size or use platform data
  dw_dmac: get number of channels from hardware if possible
  dw_dmac: fill optional encoded parameters in register structure
  dw_dmac: mark dwc_dump_chan_regs as inline
  DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources
  DMA: PL330: Remove redundant runtime_suspend/resume functions
  DMA: PL330: Remove controller clock enable/disable
  dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
  ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE
  dma: tegra: use list_move_tail instead of list_del/list_add_tail
  mxs/dma: Enlarge the CCW descriptor area to 4 pages
  dw_dmac: utilize slave_id to pass request line
  dmaengine: mmp_tdma: add dt support
  dmaengine: mmp-pdma support
  spi: davici - make davinci select edma
  ...